Adobe Acrobat 7.0 Pro Printer will not install

Hello All,
I have a new PC - Win 7 Pro x64 - and installing Adobe Acrobat 7.0 Pro. The printer refuses to install. Gives error:
Warning 20225. Adobe Acrobat 7.0 Setup was unable to create a new item: Adobe PDF Port and Printer. The Adobe PDF Printer may be unavailable. GetLastError: The operation completed successfully.
I tried the Detect and Repair under Help, and I get the same error.
Any help would be appreciated.

I think that will be your solution. The printer driver is not compatible with newer systems, especially 64-bit ones.

Similar Messages

Adobe Acrobat Reader 8 Pdf files will not open normally

This applies to all Pdf files.
Double click or right click>click "open."
Receive: Adobe Acrobat Reader is required to view the file. Would you like to install Adobe Acrobat Reader now?
I had Adobe Reader 9. Experienced problem described above. Uninstalled and installed version 8. Same problem.
I have three computers with only one with this problem. PC Windows XP SP3.
Please advise.
Robert.

I have opened: https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html I click on test page and it downloads Acro_Test.pdf 5..8kb -- psu.edu,then I open the page, the hour glass comes on and goes off without ever opening. The Reader software in my program file.
Don't keep sending the same message. it does'nt work
Paul
From: kglad
To: ps walker
Sent: Monday, April 08, 2013 2:43 PM
Subject: Adobe Acrobat Reader x11.0.02 will not open
Re: Adobe Acrobat Reader x11.0.02 will not open
created by kglad in Downloading, Installing, Setting Up - View the full discussion

Adobe Acrobat Reader x11.0.02 will not open

Adobe Acrobat Reader X11.0.02 will not open on my windows computer.

I have opened: https://courses.worldcampus.psu.edu/public/diagnostics/Acrobat.html I click on test page and it downloads Acro_Test.pdf 5..8kb -- psu.edu,then I open the page, the hour glass comes on and goes off without ever opening. The Reader software in my program file.
Don't keep sending the same message. it does'nt work
Paul
From: kglad
To: ps walker
Sent: Monday, April 08, 2013 2:43 PM
Subject: Adobe Acrobat Reader x11.0.02 will not open
Re: Adobe Acrobat Reader x11.0.02 will not open
created by kglad in Downloading, Installing, Setting Up - View the full discussion

Adobe Acrobat package built with CCP will not completely install

Adobe Acrobat package built with CCP will not completely install. It starts out fine as if it is installing then suddenly disappears with no errors.   I am installing it under the local administrator account and simply double clicking on the setup.exe created in the build folder. Am I missing something??

Hi rivera2u & TRU Software,
I believe you are just double clicking on the Exception Deployer and not running the same from the command prompt . Mentioned below is the syntax that we need to use while using Exception Deployer on your machine(s).
ExceptionDeployer
    --workflow=install
    --mode=pre|post
    --INSTALLDIR=<path_of_installation directory>
    --installLanguage=<locale_code for Acrobat>
    --abortOnFail
    --help
The same is mentioned in the link shared by Abhijit earlier.
Please do let us know if this works for you or not.
Cheers,
Kartikay Sharma

Adobe premier elements 11 downloaded but will not install

adobe premier elements 11 downloaded but will not install?

Hunt
What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
So, Meyeswalter, so that we can dispel those thoughts
a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
Thanks.
ATR

Adobe flash 10.1.102.64 will not install

Adobe Flash 10.1.102.64. will not install
I downloaded fp_10.1.102.64_and_9.0.289.0_archive but it will not install. I did use Flash uninstaller program first.
Under Application, Adobe Flash.app 10.1 r102 18.9 MB shows installed.
What did I do wrong?
If I uninstall Safari, then download reinstall, will that help me? I currently have no Flash plug-in with Safari 4.1.3 or Firefox 3.6.22.

Did you maybe install the stand alone player & not the plugin for browsers?
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
Download this if you haven't...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
Once downloaded if it doesn't unzip automatically the double click on that file.
Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
Or I put up the smaller ones here...
http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
Stand alone player...
http://dl.dropbox.com/u/450421/LastFlashPPC.zip

Acrobat Pro 10 will not install keeps rolling back

I am attempting to install Adobe Acrobat X on a Windows 7 64 Bit machine, it will not install, gets all the way to the end and then just starts rolling back says the installation was interrupted and that no changes were made to the system.
I ran the msi from the command line with verbose logging on to see if I could figure out where it fails but couldn't find the error (towards the end it lists many errors but it seems to just be a list of possible errors, not sure but I definately have admin right and ran the msi as an admin so at least those two don't make sense).
I don't understand why its not installing but I'm really ticked its not at least telling me why its not installing. I had adobe reader and flash on the computer and I was afraid they might be newer versions than just straight Pro X so I uninstalled everything adobe on the computer and it still won't install the Pro X.
Can someone take a look at my log file and see if they can tell what I'm doing wrong? It would be very appreciated.
Thanks, SW.
Log file link
https://docs.google.com/open?id=0BwFRNdTQrK4sc3Q1aV9uMl9uZXc

One thought. Have you tried downloading the updates (http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows) and installing directly, rather than doing updates through the help menu?

Acrobat Pro XI will not install. Error says: Setup has determined you have a more functional product.

I have Standard XI installed and Pro will not install. Says Setup has determined you have more functional product. Setup will now terminate.

It may be that it is seeing the version number and not the product itself. All I can suggest is for you to deactivate and uninstall Std, then install Pro.

I installed acrobat 8 standard, the printer did not install, we cannot select files to convert to PDF. Why did printer not install

I installed my acrobat version 8 standard and activated however the printer did not install. The download was successful but we have no printer icon to select to convert files to PDF. Can you help with why the printer did not install. we have windows 7 op system

Sorry ! - you seems a little un-clear about what you are really doing and what your problem really is.
Your headline says Acrobat.com your text Adobe.com , you tell you clicked on the file for a pdf page but not where it is that you are clicking , then tells you are stuck and that you are waiting for Acrobat 8..........
First of all : if your question concerns Acrobat.com then you were posting in the wrong forum ! The Acrobat.com forum is located here http://forums.adobe.com/community/acrobatdotcom
Secondly if your question were regarding printing files from Acrobat.com then here are some links that you could find of assistance :
http://forums.adobe.com/message/959249#959249
http://forums.adobe.com/message/1048419#1048419
http://forums.adobe.com/message/987141#987141
Kind Regards
Fiat Lux !

MacBook Pro 17" Will Not Install Boot Camp

Has anyone else found that Boot Camp will NOT install on a 17" MacBook Pro? We were able to partition the drive and install Windows but when we tried to install the Mac Drivers we kept getting the error message "this software will not install on your hardware". This is very frustrating as we bought the 17" specifically to run both Mac OSX and PC Windows. Has anyone got any ideas?

You may need to wait until Apple updates the drivers or you could try extracting them from the package then installing them that way

Deskjet 1512 Printer will not install....

Hi
I have a Deskjet 1512 "All in one" printer.
I have followed the setup and installation instructions down to the last comma- and still some 6.5 hours later- I still have a new printer that does not work.
I am running Windows XP / Service Pack 3 / Dotnet 3.5
I ran the installation disk (provided), made a cup of tea, ticked the boxes, answered the questions.
When prompted (and only when prompted) - connected my Printer and USB lead to the computer... that's where the issues began.
The "Full Feature" whistles and bells software began to try and detect my device.
It was beaten to it by Windows Harward "Wizard" - telling me it had detected a new device....but it could not be installed "Due to a missing Module".
About 2 seconds later - the HP "Full Feature" software spits out it's dummy and tells me to connect my printer and check the USB lead......
So- I replaced ther USB lead with 4 different ones I have spare, as well as try all the various USB ports on my computer.
Still the same issue.
However-
The Scanner had installed- and works fine.
So I attempted a forced "Backdoor" installation of the printer drivers- via Windows Hardware Manager.
This all looked so promising- the Drivers finally looked as if they were installing.
At 99%, the Hardware Manager pop-up informed me that my "device had been install successfully"....
About 1 second later- another pop-up appears- now telling me that it wasn't possible to "complete an action"? and that my "device was not installed".
A brief flick through driver manager showed me that my scanner was installed, but the Printer wasn't.
I completely uninstalled the HP software, and then Dot Net.... cleaned all Temp files, and removed all rogeu Registry Entries.
Then Restarted my computer (after checking that USB 2 was enabled in the Bios- which it was)
I then re-installed the upto date Dot Net (downloaded via HP website), and the Up to date "Full Feature" software (also courtesy of the HP website).....and.....
......still the same.
In short- I have tried:
Removing all previous installations of the HP software and Dot Net 3.5
Reinstalling all of the above
4 x Different USB leads
All the different USB ports on my PC
Swearing and Cursing (usually works with Microsoft Products only)
The only thing I have NOT tried, is Witch Craft and Country Dancing.
Any further suggestions would be much appreciated......
This question was solved.
View Solution.

Hi again
As I have pointed out in my previous postings-
I have updated my version of XP, it's service Packs and also the version of DotNet- which I downloaded from this forum, and have double checked that it is the most up to date- which it is.
I have tried to "Copy" documents on the printer, and it does not do anything.
A warning light (beside the X button) flashes Orange.
I then tried to scan the document as a JPEG image- and that worked fine, it scanned, and saved with no problem whatsover.
I have tried (about 8 times now), the "Device Setup Failed to Complete" - and that pretty much states the obvious things to check when something doesn't work- the same things I have been checking for the last 6 or so days.
The Issue, is something with the software, as the drivers will not install to be able to operate the device correctly- despite attempting Various Uninstalls, Re-installs and manual installs.
In simple terms, installing the driver manually is fine; until it gets to the last stage- and then it stops and windows (kindly) informs me that "My printer was not installed as their was a problem".....it won't state what problem.
By using the HP installer; you go through the processes, and when asked to connect the printer, the HP software doesn't detect it, (though the XP Device Manager does).
I have tried so far:
The Troubleshooting guide (as mentioned above, just seems to state the obvious)
8 Different USB leads of differing lengths.
All 6 of the USB ports on my computer- which otherwise work with other devices.
Un-installing the HP software, cleaning all traces from TEMP files and the Registry, restarting my computer and re-installing.
Manually installing the Printer using Windows Hardware Manager
Copying a document on the Printer - that doesn't work.
Scanning a Document on the Printer (That DOES work)
Ensuring that my version of Windows XP is up to date.
I have the latest version of Dot Not installed- which I have.
Installing "Next Driver down"- which does install the device, but it won't print.
I have been Unable to try another machine as yet, as I don't have another available.
But that I think is my next port of call.
Thanks for your help on this.

HP OFFICEJET PRO 8500 - Will not install on wintows 8.1- says SYSTEM CANNOT FIND SPECIFIC FILE

My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific file

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Recently reloaded Adobe Acrobat/CS3 on Windows 8- will not work with printer

I recently trashed my old laptop and reloaded Cs3 on the new one with Windows8. When I open Adobe Acrobat, it will not allow me to "Create from Scanner" because it does not allow me to "Select a Device".
Even though I can print to the same device just fine in Illustrator or Photoshop, Acrobat does not seem to recognize the device.
According to Adobe Customer Care (HA!) the issue is not the activation because it shows I am already activated.
During the initial process of reinstalling CS3, it did ask me to insert my copy of Windows, which I skipped, because this new computer/laptop came pre-loaded and I don't have a disk, per-se.

Most likely an unresolvable compatibility issue. CS3 comes from a time where Win 8 couldn't even be dreamed of, after all. As suggested, update your printer driver and check the permissions on the device, but that's as good as it may get.
Mylenium

Adobe Acrobat Pro X will not install

I downloaded Adobe Acrobat but could not install as a trial. Can't get past the setup screen. What can I do ?

hi vectaire,
Please let me know what OS are you using and if any error messgae comes up during installation.

Acrobat pro trial will not install in my vista, why? help!

hi. i'm a vista user and downloaded acrobat trial pro 8.0 today to see if my company needs it, we already have another version in xp. trouble is the installation will not even start. i click the start icon, vista asks me to confirm adminstrator rights, i agree, and then: nothing! in task manager i see that acroPro80_efg.exe freezes at 1520 kt. will not budge. ever. i have a new laptop, 2x512 ram, 2ghz.
tried turning off firewall, tried right clicking (...as adminstrator...): no success. i'm using wacom pen tablet. tried turning that off also, just a random thought. i've not had any problems installing any other programs. my system is clean from viruses and running otherwise perfectly.
please help! i need this trial version to function asap: agreed on a dead line next week... i'm panicking!
anyone smart there awake?
-mar

Unable to Change Windows Vista Read-Only Folder Attribute - Super User

Adobe Acrobat 7.0 Pro Printer will not install

Similar Messages

Maybe you are looking for