Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

Similar Messages

  • Error message "The document could not be saved. This file is already open" when trying to complete an electronic signature.

    Running Adobe Acrobat Professional 10.1.0. I cannot upgrade to newer version because several applications were already tested on this version.
    When trying to complete an electronic signature, my users receive the error message ""The document could not be saved. This file is already open".  When they close and open the file again to try to sign again they find a corrupted electronic signature.  Instead of a clean signature with the box colored in light blue they see their signature with the embedeed message Click Here to Verify & Sign with the box colored in grey.
    We turned off antivirus in the Sharefolder where the forms are stored and nothing.  We turned off the antivirus on the client and nothing.  We stored the files in another server and nothing.  One workaround is saving the file in the desktop, signing it, and then back to the Sharefolder.  Another is saving the file with a different file name.
    I've searched and the only similar thing was caused by the Windows Preview Pane.  See Information Transmogrification: Adobe Acrobat saving a file does not work, displays “File may be read-only”.  No luck with this one too.
    Is definitively an intermittent problem.  The users that experience the problem experience it intermittently.
    This started to happen when we move our computers to Windows 7.
    Any ideas?

    Correction on Question:
    This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
    Users began getting the error message:
    'The document could not be saved. This file is already open.'
    last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject. 
    We really need help getting this resolved.
    Sandy Martin

  • The document could not be saved error when Saving to a SharePoint Document Library

    I am having an error when opening and commenting on Adobe PDF's that are stored in SharePoint 2010. When I attempt to save a PDF I have commented on I get the following error:
    The Document could not be saved. The server said:
    "The operation failed because an unexpected error occurred. (Result code: 0x80020005)"
    This seems to happen in a Document Library that is based on a custom template with Managed Metadata columns, when we remove the columns it seems to work and when we create a library with a standard document library template and manually add the manage metadata columns it also works fine.
    We would make this change to all document libraries where this issue occurs however this template is applied to 100's of libraries with thousands of documents stored in them. Is there anything we can look at to attempt to resolve this issue?
    Word, Excel, PowerPoint, etc. documents seem to work fine in these libraries.

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator and (me)".

    When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.

    Disk Utility won't repair your home folder.  Sounds like your home folder permissions are messed up tho.  Try repairing them this way by using Lion Recovery.
    1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
    2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
    3. In the Terminal window, type resetpassword and hit Return.
    4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
    5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
    The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
    Good luck
    RM

  • After upgrading to Maverick, when I double click on the attchment I get this message "...could not be saved, because you cannot change the contents of that fold

    After upgrading to Maverick, when I double click on the attachment I get this message "...could not be saved, because you cannot change the contents of that folder. Change the folder properties and try again, or try saving in a different location." It happens for all types of files.
    Any suggestions as how to fix this?
    I'm on a Mac OS X 10.9.3 with Thunderbird 24.5.0

    Thunderbird > preferences (I think on a mac) and under attachments set the folder

  • When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

    When I try to save a doc to my server I sometimes get this: The document could not be saved. There was a Macintosh system error (-5000). What does it mean?

    What kind of file are you saving, and what sort of clientserver setup do you have?
    If you're using MS Office, it doesn't play nice with OS X Server, particularly with network homes.

  • The document could not be saved. an unexpected network error occurred

    I have several users on a terminal server that access a PDF from a file server. This PDF has many fillable fields like Name: with an empty text box next to it.
    Sometimes when the users open this PDF everything is missing except the fillable text fields. If they try to save the file they get the error in the subject of this ticket:
    the document could not be saved. an unexpected network error occurred
    Obviously, this sounds like a networking error, but 2 things.
    1) The terminal server and the file server on both virtual servers on the same host, using the same SAN. Very unlikely to have a networking error.
    2) This doesn't happen to every, it seems to be only affecting 3 of about 25 right now, and it is not all the time.
    Any thoughts? I have checked to see if there were any hidden lock files, but that wasn't it. Google-fu turned up nothing.
    Thanks for your help

    Hey jdorimoto,
    Could be please confirm if you are using Adobe Reader or Acrobat (what version) to open a PDF form.
    What version of OS are you using?
    Try saving the form to any other location with administrative privileges and then check.
    Hope to get your response.
    Regards,
    Anubha

  • The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

    I am having problems  saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
    The document could not be saved. The server said:
    “The operation failed because an unexpected error occurred. (Result code 0×80020005)”
    Please ensure you have completed all required properties with the correct information and try again.
    I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
    Adobe Acrobat version 10.1.13
    SharePoint 2010

    Hi quodd,,
    We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
    1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
    2. How are you opening and saving the PDF, the exact workflow?
         Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
    3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
    4. Please verify that columns name do not contain spaces or some other special characters.
       Can you try to save PDF to library with Custom template and just a single managed metadata column  with a simple name
    Thanks,
    Nikhil Gupta

  • The document could not be saved. A file I/O error has occurred

    Hello,
    I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
    I have tried:
    1. Saving to local hard drive
    2. Saving to network drive
    3. Renaming file and repeating steps 1&2
    4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
    Any thoughts? Thanks so much.
    Phil
    System specs:
    Windows 7 Professional
    16 gb RAM
    500Gb Hard drive (409gb free)
    Adobe Acrobat X Pro
    Message was edited by: bldfb024  (system specs included at bottom)

    No it is from a disk drive.
    Robb Hanke
    [signature deleted by host]

  • Error Message "The document could not be saved. A number is out of range"

    Hello to all,
    I'm working on a G5/10.4.11/Illust CS3/Acrobat 9 and use to generate .pdfs from .ais by using "Save as pdf" function. Either with LowRes profile and HighRes profile. My pdfs are sent to PC users that use to post it them for changes. But when they need to save them, they get the message "The document could not be saved. A number is out of range".
    I know there was a few subject about that but do you have a recent solution to give me to help avoiding this bug ?
    Many thanks in advance !
    Stekc

    As a follow to the above, the problem was related to a file transfer.  The PDFs in question were being transfered from a Unix platform to a Windows Server.  The transfer was defaulting to ASCII or Text and not binary.  Apparently this was never an issue with older versions of Adobe Reader.  Once the transfer was switched to binary, Reader X was able to view the files with no missing pages.  Something was being stripped from the file that Reader X just didn't like.

  • The document could not be saved. This file is already open.

    This problem recently developed.with several versions of Acrobat Reader 9.x installed. The full version of Acrobat is not installed.
    Users used to be able to open an editable .pdf file in IE, edit it and save it. Some users can no longer do this. The are getting
    the error message "The document could not be savedl. This file is already open. Users who are able to save from within a browser, are actually
    using Acrobat Reader, which opens when opening the .pdf file from within the browser. Everyone can open Acrobat Reader V 9.x, edit an editable .pdf file and save it. It is just when the .pdf file is opened from a browser application, and the reader is not also launched. Help! This just started happening.
    Thanks,
    Sandy

    Correction on Question:
    This is a web application and the users need to be able to load the editable .pdf form from the website, edit it and submit it back to the website from within Internet Explorer.
    Users began getting the error message:
    'The document could not be saved. This file is already open.'
    last Friday after having no problems prior to this. Some users can edit the editable .pdf forms on the website and save the file with the same name to the website. Some get the error mentioned in the subject. 
    We really need help getting this resolved.
    Sandy Martin

  • The document could not be saved.  Write error.

    I have a portfolio with a OneNote section embedded in the portfolio.  When I attempt to save the document, I get an error message stating, "The document could not be saved.  Write error."  The document is stored on a network drive.  Other users are able to make edits and save.  I am using Acrobat x, Windows 7, and SharePoint 2010.  I am unable to find any solutions on the web.

    *Bump*

  • BAPI_ACTIVITYCRM_CHANGEMULTI : "The document could not be saved"

    Hi,
    hope somone can help.
    I try to change the status of some activities. For this action i use the BAPI_ACTIVITYCRM_CHANGEMULTI function module. But the only message i get is "The document could not be saved" and nothing happend with the activity status.
    Here is my coding :
    DATA: lv_hits TYPE crmt_portal_hits.
    DATA: lt_activities TYPE TABLE OF crmt_portal_list_businessact,
              wa_activities TYPE crmt_portal_list_businessact.
    DATA: lt_output TYPE TABLE OF y0cra_change_act_status,
              wa_output TYPE y0cra_change_act_status.
    DATA: obj_custom_container TYPE REF TO cl_gui_custom_container,
              obj_result_grid TYPE REF TO cl_gui_alv_grid.
    DATA: lv_ok_code TYPE sy-ucomm.
    SELECTION-SCREEN: BEGIN OF BLOCK a WITH FRAME.
    PARAMETERS: p_test AS CHECKBOX DEFAULT 'X'.
    SELECTION-SCREEN: SKIP 1.
    PARAMETERS: p_usr TYPE crmt_portal_search_businessact-bu_partner OBLIGATORY.
    PARAMETERS: p_datefr TYPE crmt_portal_search_businessact-from.
    PARAMETERS: p_dateto TYPE crmt_portal_search_businessact-to.
    SELECTION-SCREEN: SKIP 1.
    PARAMETERS: p_oldsta TYPE crmt_portal_search_businessact-status OBLIGATORY.
    PARAMETERS: p_newsta TYPE crmt_portal_search_businessact-status OBLIGATORY.
    SELECTION-SCREEN: END OF BLOCK a.
    AT SELECTION-SCREEN.
      IF p_oldsta = p_newsta.
        MESSAGE text-m01 TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      PERFORM get_data.
      PERFORM change_data.
      CALL SCREEN 0100.
    END-OF-SELECTION.
    *&      Form  get_data
          text
    FORM get_data.
      REFRESH: lt_output, lt_activities.
    Get Activities
      CALL FUNCTION 'CRM_SEARCH_BUSINESSACTIVITY'
        EXPORTING
          from                   = p_datefr
          to                     = p_dateto
          bu_partner             = p_usr
          status                 = p_oldsta
          max_hits               = 1000
        IMPORTING
          hits                   = lv_hits
        TABLES
          business_activity_list = lt_activities.
    ENDFORM.                    "get_data
    *&      Form  change_data
          text
    FORM change_data.
      DATA: lt_guid TYPE TABLE OF bapibus20001_guid_dis,
                wa_guid TYPE bapibus20001_guid_dis.
      DATA: lt_header TYPE TABLE OF bapibus2000110_header_dis,
                wa_header TYPE bapibus2000110_header_dis.
      DATA: lt_header_changex TYPE TABLE OF bapibus2000110_header_insx,
                wa_header_changex TYPE bapibus2000110_header_insx.
      DATA: lt_status TYPE TABLE OF bapibus20001_status_dis,
                wa_status TYPE bapibus20001_status_dis.
      DATA: lt_status_change TYPE TABLE OF bapibus20001_status_ins,
                wa_status_change TYPE bapibus20001_status_ins.
      DATA: lt_status_changex TYPE TABLE OF bapibus20001_status_insx,
                wa_status_changex TYPE bapibus20001_status_insx.
      DATA: lt_header_change TYPE TABLE OF bapibus2000110_header_ins,
                wa_header_change TYPE bapibus2000110_header_ins.
      DATA: lt_return TYPE TABLE OF bapiret2,
                wa_return TYPE bapiret2.
      DATA: lv_status_new TYPE string,
                lv_status_old TYPE string.
    Set status for changing activity
      IF p_newsta = 'OPEN'.
        lv_status_new = 'E0001'.
        lv_status_old = 'E0003'.
      ELSEIF p_newsta = 'CLOS'.
        lv_status_new = 'E0003'.
        lv_status_old = 'E0001'.
      ENDIF.
      LOOP AT lt_activities INTO wa_activities.
    Set output data
        MOVE-CORRESPONDING wa_activities TO wa_output.
        wa_output-light = '3'.
        wa_guid = wa_activities-guid.
        APPEND wa_guid TO lt_guid.
    Get Activity detail
        CALL FUNCTION 'BAPI_ACTIVITYCRM_GETDETAILMULT'
          TABLES
            guid   = lt_guid
            header = lt_header
            status = lt_status.
        IF sy-subrc IS INITIAL AND p_test <> 'X'.
    Set header data
          READ TABLE lt_header INTO wa_header
          INDEX 1.
          MOVE-CORRESPONDING wa_header TO wa_header_change.
          wa_header_change-mode = 'B'.
          wa_header_change-handle = '0001'.
          APPEND wa_header_change TO lt_header_change.
          APPEND wa_header_changex TO lt_header_changex.
    Set status data
          LOOP AT lt_status INTO wa_status.
            wa_status_change-ref_guid = wa_status-guid.
            wa_status_change-ref_handle = wa_header_change-handle.
            wa_status_change-ref_kind = wa_status-kind.
            wa_status_change-status = wa_status-status.
            wa_status_change-activate = wa_status-active.
            wa_status_change-user_stat_proc = wa_status-user_stat_proc.
            IF wa_status-status = lv_status_old.
              wa_status_change-status = lv_status_new.
              wa_status_changex-status = 'X'.
            ENDIF.
            APPEND wa_status_change TO lt_status_change.
            APPEND wa_status_changex TO lt_status_changex.
            CLEAR: wa_status, wa_status_change, wa_status_changex.
          ENDLOOP.
    Change activity
          CALL FUNCTION 'BAPI_ACTIVITYCRM_CHANGEMULTI'
            TABLES
              header  = lt_header_change
              headerx = lt_header_changex
              status  = lt_status_change
              statusx = lt_status_changex
              return  = lt_return.
          READ TABLE lt_return INTO wa_return
          WITH KEY type = 'E'.
          IF sy-subrc IS INITIAL.
            wa_output-message = wa_return-message.
            wa_output-light = '1'.
            CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          ELSE.
            CALL FUNCTION 'BAPI_ACTIVITYCRM_SAVE'
              TABLES
                objects_to_save = lt_guid
                return          = lt_return.
            READ TABLE lt_return INTO wa_return
            WITH KEY type = 'E'.
            IF sy-subrc IS INITIAL.
              wa_output-message = wa_return-message.
              wa_output-light = '1'.
              CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
            ELSE.
              CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
            ENDIF.
          ENDIF.
        ENDIF.
        APPEND wa_output TO lt_output.
        REFRESH: lt_guid, lt_status, lt_return, lt_header, lt_header_change,
                 lt_status_change, lt_status_changex, lt_header_changex.
        CLEAR: wa_activities, wa_guid, wa_output.
      ENDLOOP.
    ENDFORM.                    "change_data
    *&      Form  init_screen
          text
    FORM init_screen.
      DATA: wa_layout TYPE lvc_s_layo.
      IF NOT obj_custom_container IS BOUND.
        CREATE OBJECT obj_custom_container
          EXPORTING
            container_name = 'CUSTOM_CONTAINER'.
        CREATE OBJECT obj_result_grid
          EXPORTING
            i_parent = obj_custom_container.
    Set grid layout
        wa_layout-cwidth_opt = 'X'.
        wa_layout-excp_fname = 'LIGHT'.
        IF p_test = 'X'.
          wa_layout-grid_title = text-t01.
        ENDIF.
        CALL METHOD obj_result_grid->set_table_for_first_display
           EXPORTING
           i_buffer_active               =
           i_bypassing_buffer            =
           i_consistency_check           =
             i_structure_name              = 'Y0CRA_CHANGE_ACT_STATUS'
           is_variant                    =
           i_save                        =
           i_default                     = 'X'
             is_layout                     = wa_layout
           is_print                      =
           it_special_groups             =
           it_toolbar_excluding          =
           it_hyperlink                  =
           it_alv_graphics               =
           it_except_qinfo               =
           ir_salv_adapter               =
          CHANGING
            it_outtab                     = lt_output
           it_fieldcatalog               =
           it_sort                       =
           it_filter                     =
         EXCEPTIONS
           invalid_parameter_combination = 1
           program_error                 = 2
           too_many_lines                = 3
           others                        = 4
      ENDIF.
    ENDFORM.                    "init_screen
    *&      Module  PBO_0100  OUTPUT
          text
    MODULE pbo_0100 OUTPUT.
      SET PF-STATUS '0100'.
      PERFORM init_screen.
    ENDMODULE.                 " PBO_0100  OUTPUT
    *&      Module  PAI_0100  INPUT
          text
    MODULE pai_0100 INPUT.
      CASE lv_ok_code.
        WHEN 'BACK'.
          LEAVE TO SCREEN 0.
        WHEN 'EXIT'.
          LEAVE PROGRAM.
      ENDCASE.
    ENDMODULE.                 " PAI_0100  INPUT
    Regards,
    Anton

    Hi ,
    i am also haveing same problem can u help me
    Regards,
    Tanveer

  • I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes

    Hello lenmin,
    Thanks for using Apple Support Communities.
    To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
    iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
    Have a great weekend,
    Alex H.

  • The document could not be saved. There was a problem reading this document (114).

    After adding some sticky notes to a PDF in Adobe Reader i went to save it and it comes up with "The document could not be saved. There was a problem reading this document (114)." and will not let me save it. Please can you advise if there is anyway of saving this document with the sicky notes in?

    The problem is most likely document corruption. Try to work on a new copy from the original source.

Maybe you are looking for