Adobe bridge CCからphotoshop  CCが開かない

adobe bridge CCからphotoshop  CCで作成したファイルを開こうとしたところ、
添付画像のアラートが出ました。
photoshop CS2ではなくphotoshop  CCでファイルを開けるようにしるにはどうしたらよいでしょうか?
● 作業環境
  WIN7(64bit)
● 現在photoshop  CS2はインストールされていません。
● アプリケーションを指定して開こうとすると
 illustratior CS2
  photoshop (初期設定)
の2つの候補が出てきます。photoshop (初期設定)を選択してもファイルは開きません。

Bridgeの「ファイルタイプの関連付け」がおかしくなっているのではないでしょうか。
環境設定に設定があるので、その画面を開いてリセットしてみてはどうでしょう。

Similar Messages

  • I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera R

    I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D.  I have tried to go to help > updates, and the software says that it is "Up to Date".  However, if I view the plug-in, it says that Camera Raw is only version 7.1.  I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW!  Please Help!

    Did you fix your issue?  I am having the same one

  • Crash when opening Yosemite OSx installer and Adobe Bridge and Photoshop CS6

    Hi,
    I'm having increasing problems with my Mac Book Pro. It crashes when opening Adobe Bridge CS6, Photoshop CS6 and now when trying to install the Yosemite operating system.  There is no error code associated with the crash but the error report is below:
    19/10/2014 10:24:07.084 pm ReportCrash[1410]: com.apple.message.domain: com.apple.crashreporter.writereport.crash
    com.apple.message.signature: AdobeCrashDaemon
    com.apple.message.signature2: UNBUNDLED ||| 6.9
    com.apple.message.signature3: FDEC1D7D5E72B5BCEC142C1EE957EFE2
    com.apple.message.result: NO
    com.apple.message.summarize: YES
    Sender_Mach_UUID: 3C9D65AC-CCF7-32B3-AE41-F8475197DE30
    I've also tried to install Yosemite OSx and can't open the install program, with this error code:
    19/10/2014 10:15:32.539 pm ReportCrash[1210]: com.apple.message.domain: com.apple.crashreporter.writereport.crash
    com.apple.message.signature: InstallAssistant
    com.apple.message.signature2: com.apple.InstallAssistant.Yosemite ||| 1.6.5 (1012)
    com.apple.message.signature3: B3105148EAE221144320FE0B88D924A9
    com.apple.message.result: NO
    com.apple.message.summarize: YES
    Sender_Mach_UUID: 3C9D65AC-CCF7-32B3-AE41-F8475197DE30
    I've cleaned up my hard drive and am running 8GB RAM with plenty of memory.  Also scanned the disk for errors etc.  No luck.
    Does anyone have any suggestions on what's going wrong?
    Thanks.
    MacBook Pro with Retina display, OS X Mavericks (10.9.5)

    I have the exact same problem, also running OS X Machericks 10.9.5 on a Mac Book Pro, would be really helpful to understand how to fix this error.

  • Error in starting Adobe Bridge in Photoshop CS2

    I've just installed Photoshop CS2, however upon opening Adobe Bridge this error message appears " The application has failed to start because libagluc28.dll was not found. Reinstalling to application may fix the problem"
    I have reinstalled and click repair but to no avail
    I followed Adobe Support Knowledgebase solution and run CMD and this appears:
    c:Documents and Settings/Jesus M Ferraris>
    then i entered the command
    cacls c:\windows\installer /T /E /C /G administrators:F
    but an error message appears - 'cacls' is not recognized as an internal or external command, operable program or bathc file
    I also entered the next command
    cacls "c:\documents and setting\all users" /Y /E /C /G administrators:F
    still the same error as above appears, Please help, have I miss something or was my procedure correct...
    P4, 512ram, WXP 80gHD

    Very useful.
    Good Luck.
    My
    Si
    tes

  • Can not open Adobe Bridge in Photoshop CS2

    Adobe Bride is supposed to be included with Photoshop CS2, but there are no links to it when in Photoshop.  File>Browse does not go to Bridge.   I downloaded a new copy of Bridge from Adobe and installed it.  There is still no link to Bridge in Photoshop, but there is a Bridge icon in the start menu.  However, double clicking the icon gives the error "The program cannot start because the file libagluc28.dll is missing from your computer".    However, a search for that file finds it in three locations: C:\Program Files (x86)\Adobe\Adobe Help Center, C:\Program Files (x86)\Adobe\Adobe Photoshop CS2, and C:Program Files (x86)\Adobe\Acrobat.  Any ideas as to how to start AdBridge?

    Adobe has disabled the activation server for CS2 products, including Acrobat 7, because of a technical issue. These products were released more than seven years ago, do not run on many modern operating systems, and are no longer supported.  
    Adobe strongly advises against running unsupported and outdated software. The serial numbers provided as a part of the download may only be used by customers who legitimately purchased CS2 or Acrobat 7 and need to maintain their current use of these products.
    Download Acrobat 7 and CS2 products

  • Adobe Bridge in Photoshop - How to install Bridge and camera raw? And what is it all about?

    Hi everyone! I am actually in love with this adobe photoshop. I used PSCS2 before, but later on upgraded to CS4. But I feel tired in upgrading to CS5.
    One time, I found a tutorial in youtube about camera raw, and would really want to use it. But I was wondering how to install the camera raw. I believe camera raw is a plugin? so I downloaded the plugin here, installed it in my PS. I downloaded a file Camera Raw.8bi and paste it on my C drive - C:\Program Files\Adobe\Photoshop CS4\Plug-ins\File Formats.
    I now am very confused, how will I open it? I do not have adobe bridge!  After I installed the camera raw, I opened my PS. I clicked the file>then browse in bridge. I had an error, it's "error 2 photoshop11 undefined". Which is what I thought, I might have done something wrong with installing it.
    My question is, do you still need adobe bridge installed in order to use camera raw?
    If yes, how does it work? How am I suppose to open camera raw?
    If no, how am I going to open camera raw without bridge?
    And also, where will I download adobe bridge? I cannot find one here for CS4, only adobe bridge for CS5. I am wondering, is it okay to install adobe bridge CS5 and use it with my PS CS4?
    I badly need help!

    WebDAV (Web-based Distributed Authoring and Versioning) is a set of extensions to HTTP/1.1.
    The main difference from FTP as far as I can see is that it allows you to edit documents on a remote web server.
    WebDAV was used by the Apple server - MobileMe but is not generally supported by hosting services.
    Using WebDAV you can mount a directory locally. This was how iDisk worked on your Mac and you could drag files onto it to upload them to the remote directory.
    With WebDAV, a number of users can share a directory which is why its used in local networks but presents security problems when using a remote server.
    If you are into file sharing rather than publishing, Dropbox or its new rival SugarSync are more appropriate.

  • Set file type associations in Adobe Bridge for Photoshop CS6

    Is there a way I can edit the registry so that in Adobe Bridge, under edit, preferences, file type associations, the jpg extension is forced to use the 32-bit version of Photoshop?  I can do it manually, but is there a registry key i can export to apply it to multiple computers?

    Yes, in theory, but it is generally not recommended. But that location would depend on what OS you are on. This video give the locations for the Photoshop files, Bridge would just be in a neighboring folder: http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

  • Adobe Bridge CS6 ツールメニューから「Photoshop」が消えてしまいました

    Adobe Bridge CS6を使用していました。
    OS X Mavericksにしてからしばらく経つのですが、
    最近になって「イメージプロセッサー」を使用したいと思い「ツール」メニューを見た所、
    「Photoshop」の項目そのものがなくなっていました。
    新OSとCS6との相性が良くないと聞いたことがあったので、
    すぐにCCを入れてみましたが、こちらも項目が消えていました。
    こういったケースは調べても出ておらず、途方に暮れています。
    イメージプロセッサー機能自体はPhotoshopのスクリプトでできますが、
    ずっと使用していたのに消えてしまったのがなぜなのか理解できません。
    どなたかこういった現象に心当たりがあればと思い、投稿いたしました。

    アドバイスありがとうございます。
    入れ違いで昨日サポートに電話してみた所、
    環境設定の一部がクラッシュしている可能性が高いとのことでした。
    CS6にて環境設定をリセットした所、無事に復活しました。
    しかし、CCは同じ処理をしても復活せず。。。
    ご指摘頂いたスタートアップスクリプトを確認してみた所、
    有効になっていましたが、
    項目がごっそりなくなっていました。
    再び電話しましたが混雑で繋がらず昨日は断念したのですが、
    明日また電話してみようと思います。
    今度は別の原因なのかもしれません。

  • How to view .MOS files in Adobe Bridge and Photoshop CS5?

    I recently shot with a large format camera and used Capture One to tether during my shoot. I went home to look through my pictures and noticed that the files are .MOS files and they don't open in Bridge or Photoshop. How can I fix this?

    Apparently it depends also on whether .mos was shot with compressed or uncompressed format.  If uncompressed DNG will work http://www.luminous-landscape.com/forum/index.php?topic=11843.0;wap2

  • Trying to open Adobe Bridge from Photoshop CC 2014 will launch Creative Cloud

    As written in the subject, I have the problem that Bridge doesn't start anymore since updating to Photoshop CC 2014.
    Instead the creative Cloud desktop application is launched and tries to reinstall Bridge CC (although it is already installed)
    All old Bridge version were uninstalled without result.

    I have the same issue when trying to Browse in Bridge from Photoshop CC 2014. When I click "Browse in Bridge" in Photoshop CC 2014, the Creative Cloud desktop client window opens up and asks "Are you sure you want to install this version of Bridge"?
    Like you, I also thought it was an update so I clicked' "Yes, install this version" option.
    Bridge will launch from the dock icon I have set up, but not from within Photoshop CC 2014.
    Any solutions to this bug anyone?

  • Camera raw changes color in adobe bridge and photoshop

    Hi all, I am quite new to use RAW. I have raw files that I want to edit. Unfortunately, the moment I click on the raw files, the color changes.
    Is there anything I should do to the color setting?
    I am using a canon 20d and Adobe Photoshop, Bridge CS 3 and Adobe Camere Raw 4.0

    The image is indeed rife with red color.
    The fact that the embedded JPEG isn't quite as oversaturated with red as Adobe's conversion with the lowest color temperature of 2000 just says that Canon's conversions have more range at the low-end of the color temperature setting.
    This is the color from the embedded JPEG.  Clearly it's dominated by a reddish-orange color, though not as red as that from Adobe's software.
    This is the color from Adobe Camera Raw's conversion at the (low-end minimum) color temperature of 2000:
    This is the photo converted with Canon DPP using "click white balance" on the bridge beam on the left:
    Note, however, that (though the dropper seems to have incredible range) DPP does not allow you to specifically SET a color temperature lower than 2500K, which yields this color:
    The bottom line here is that the "Click White Balance" function in Canon's DPP has far more range than ACR, where even the white balance dropper "mins out" at 2000K.
    That's something the Adobe folks may want to look into, to extend the range of ACR's capabilities to suit this kind of IR photography.
    -Noel

  • Problem with Adobe BRIDGE getting Photoshop/Image Processor menu

    When I open my drop-down or fly-out menu under TOOLS in Bridge (CS3 version), the entire portion of the menu which is supposed to appear next underneath the Cache line option is missing (i.e., Photoshop, Illustrator, InDesign, Start Meeting..., Photoshop services).
    What gives?
    I'm trying to get to Image Processor under the Photoshop menu option (which is supposed to appear in the Tools drop-down menu).
    Please tell me what's wrong. Thanks in advance.

    Thanks, but there IS no Photoshop subheading in my Tools menu.
    That exactly describes the problem I'm having!

  • Using Adobe Bridge with Photoshop Elements

    I have an iMAC with iLife 08.
    I take photos in RAW format with a Nikon camera.
    I have been editing photos this way:
    After uploading photos to iPhoto, export them as jpg to a new folder on the desktop, external HD or wherever. I open Photoshop Elements, edit the exported photo.
    Then I'm stuck with my edits outside of iPhoto, unless I then import them back into iPhoto. It works, but it's cumbersome.
    Today I thought I'd try a different route. I opened Photoshop Elements, and tried to use Bridge to browse photos. I can find the iPhoto library easy enough, but if I click on it, it opens iPhoto, and I'm stuck - can't open the photos in Photoshop.
    I am hoping that if I do it correctly, I can save my edits directly back into iPhoto.
    Any ideas?

    Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
    1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Creating Image Galleries with Adobe Bridge | Learn Photoshop CS5 | Adobe TV

    Quickly review, arrange, and output images to PDF and the web.
    http://adobe.ly/zbF114

    What kind of file will the advanced (more than 4 images) swf convert to play as slideshow for mobile (cell ph) devices?! How many images: 'simple' is only 4 per (swf conversion to dw as quicktime movie) qt movie and it doesn't say advanced (more than 4 images) will convert from swf to dw as qt movie)... Quicktime movie can be converted to h.264 but there's not a mention w/in this video of any of that either: swf files won't play on most IPhs or other mobile devices.  

  • Adobe Bridge Always Opens CS2

    Recent thunderstorn activity caused several rapid cycling of power on and off to my computer. Now have some change in behavior as how Adobe Bridge and PhotoShop CS2 interact. Previously I could open Bridge (ver. 1.0.4.6) as a standalone app and make my raw edits. Now upon trying to open Bridge, CS2 always opens first and then Bridge. CS2 always remains in the background. I am not able to open Bridge as atandalone. While this is not a major problem, it is certainly different from the workflow to which I was accustomed. I reinstalled Bridge and ACR 3.7 but same symptons present. Should I reinstall CS2? Any ideas??
    Royal

    I never had CS2, but in CS3 open PS and in the preferences section there is an option to "start Bridge on login".  I don't recall an option to start PS at startup.
    Might check the OS startup preferences.
    If all else fails you can reset the preferences for Bridge and Photoshop.  Believe for CS2 you have to press and hold down the ctrl + alt + shift while clicking on icon to start program.

Maybe you are looking for