Adobe Captivate 5.5 file could not open project

After copying/pasting a few Captivate slides from one project to another, we received the following message and can not open the file any more.
Any advice would be appreciated.  Should we insert slides from one Captivate to another someway differently than copy/paste?

Check out this post about recovering projects:
http://www.infosemantics.com.au/adobe-captivate-troubleshooting/recover-corrupt-project
If you want 300 more troubleshooting tips for Cp, you'll need to read the book:
http://www.infosemantics.com.au/troubleshoot-adobe-captivate

Similar Messages

  • Adobe reader 10.1.2 could not open the file '/C/WINDOWS'

    since adobe reader 10.1.2 urls don't work in pdf files to folders.
    C:\WINDOWS\xy.xls  
    ok
    C:\WINDOWS
    not ok > adobe reader 10.1.2 could not open the file '/C/WINDOWS'
    C:\WINDOWS
    ok > with deactivated protected mode
    no problems with 9.5.0 or 10.1.1 with activated protected mode 
    is that known? any other workaround?
    thanks

    Hi,
         I also have Reader 10.1.2 installed on my machine and I also cannot open a link in the PDF, that will eventually call an exe file. I don't think that there would be different behaviour on your machine. So, I think, now this is the expected behaviour Reader 10.1.2 onwards.

  • UCCX 8.0 CAD: Can you disable auto update? Error: "unable to download file" Could not open request.

    I have a UCCX 8.0 (2) Installed.
    Users here have limited access via proxy. Now everytime i try to run the CAD or CSD, i get the error:
    "unable to download file" Could not open request.
    It seems to want to install or check for an update.
    The work around i have found is to go to the CAD directory and change the update.exe filename
    C:\Program Files (x86)\Common Files\CAD\bin\update.exe
    i dont want to have to do this for every user as i possibly want the update.
    Is there a way to allow or bypass proxy on CAD?
    Regards
    J

    I had this problem before - to resolve it I disabled the proxy in internet explorer settings.
    You'll need to make sure the CAD version matches your UCCX server version. Otherwise you may run in to issues.
    Brian

  • When i try to open a document in Adobe Reader, I get a "could not open" msg?  Why?

    When I try to open a document in Adobe, I get an error messsage:  "Adobe Reader could not open 'whatever file it is' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."  This only happens on some documents, but frequently.  Can anyone help?

    Are these Word documents email attachments that you are saving using right-click and Save Link As? It's possible that your email website has changed and instead you need to click the image or use the site's button.

  • How to resolve the error "File could not open" in AL11?

    Hi Friends,
    When I am going to write a file via DATASET.
    But it's showing me a error"File Could not Found"?
    And I am unable to check my fiel at AL11.
    Please suggest me the solutions.
    Regards
    Ricky

    Hi,
    Try this code
    TYPES : BEGIN OF ty_emp,
    empno(2) TYPE c,
    empid(10) TYPE c,
    empname(3) TYPE c,
    END OF ty_emp.
    DATA : it_emp TYPE TABLE OF ty_emp,
    wa_emp TYPE ty_emp.
    DATA : pbk TYPE string.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS : p_file TYPE rlgrap-filename default 'D:\EMP.TXT'.
    PARAMETERS : p_asfile TYPE rlgrap-filename default 'EMP'.
    SELECTION-SCREEN END OF BLOCK b1.
    pbk = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                      = pbk
      FILETYPE                      = 'ASC'
    has_field_separator           = ' '
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
      DAT_MODE                      = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
        TABLES
          data_tab                      = it_emp
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    OPEN DATASET p_asfile FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      LOOP AT it_emp INTO wa_emp.
        TRANSFER wa_emp TO p_asfile.
      ENDLOOP.
      CLOSE DATASET p_asfile.
    ==============================================
    Regards,
    Krrishna

  • D600 raw file could not open in Aperture, but ok in Preview

    I import D600 photo to my Aperture library all photo are in RAW format, but some file (almost 1-2 out of 100) could not view in Aperture, which show "Unsupported Image Format", but which could open in Preview, I try to import those file again and I got the same result, could someone help me.

    I am using 3.4.3
    I think it not my card or file problem, cause if I import the photo to the library using iPhoto it will not have this problem
    I have try to import the same photo to my library using Aperture and iPhoto, Aperture will always have one or two picture could not view, but when using iPhoto import the picture it is zero problem and also Apterture could view those pic which using iPhoto import.
    Therefore I think the problem should be Aperture itself.

  • FreeHand file could not open after Lens fill corrupt

    I was working on the file using Lens fill and suddenly it
    crashed so I closed the file and reopened it BUT the program could
    not allow the file to open. It said the file is not a valid
    FreeHand file. That really made me in wrecked after a whole day
    worth of working gone without anything left. I really appreciate
    any helps or suggestions.
    thanks a lot,
    bb.

    Armadillo wrote:
    >> I was working on the file using Lens fill and
    suddenly it crashed
    >> so I closed the file and reopened it BUT the program
    could not
    >> allow the file to open. It said the file is not a
    valid FreeHand
    >> file. That really made me in wrecked after a whole
    day worth of
    >> working gone without anything left. I really
    appreciate any helps
    >> or suggestions.
    Do you have an EPS version of your file? You might be able to
    retrieve
    some parts of your work by opening that file in Illustrator
    or
    converting it to PDF format.
    > Unfortunately it seems that the file is 'just'
    corrupted. Check the
    > file size it may be very small.
    >
    > This question pops up now and then and I've not heard
    that anyone has
    > succesfully restored a corrupted FreeHand file.
    >
    > Sorry! Jukka
    Yes, I've been burned by this before. I've been requesting
    that Autosave
    and Autobackup be added options to Freehand since version 3
    or so
    because of how devastating this problem is. I actually had a
    small
    program to do autobackup for me for a while but it started to
    cause
    problems as the Mac OS was updated and I had to abandon it.
    So now I
    make sure to save multiple versions of large projects as I
    work.

  • Adobe Reader Updater - Error 1402. Could not open key:

    Adobe Reader Updater, error 1402, could not open key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opt
    I might have accidently discontinue. Can any body help me????

    Hi,
    It  looks like you do not have access to the registry key mentioned i.e.  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current  Version\Run\Optional Components\IMAIL.
    This might be due to  the fact that you may not be added to the Administrators group or the  registry key has been denied access explicitly to a group that you may  be part of.
    People in my network setup were facing the same issue,  and we fixed the same using Microsoft's "subinacl" tool. You can follow  the below mentioned steps to rectify your issue as well:
    1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
    2. Install the same by double clicking on the "subinacl.msi" just downloaded.
    3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
    4. In the Command Prompt window, type in the following commands:
        i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
       ii. subinacl  /subkeyreg  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f  /grant="Creator Owner"=f (Hit Enter)
    You  should see some processes happening on your screen. After the process  ends, retry the update operation you were originally trying to perform.  Hopefully, it should succeed now.

  • DLL is used to open MS Access Database file, worked outside TestStand, and could not open Database file in TestStand

    I created a dll using VC++ to open/read MS Access Database file. The dll works when running outside TestStand, When I used the dll in TestStand, the MS Acces Database file could not open.

    To Steve1 -
    Some questions that come to mind to help with solving this are:
    1) Are you using any ActiveX control components to assist you in accessing the database?
    2) Are you using ADO or DAO or ODBC to access your data?
    3) When you called the DLL successfully outside of TestStand, what was the OI written in?
    4) Since you own the source code, what is the error or exception that is thrown and on what ADO or DAO function call does it fail?
    Scott Richardson (NI)
    Scott Richardson
    National Instruments

  • When start tomcat on centOS 5.6, got application.log error: Could not open server properties

    Hi
    I follow  FAXS_2_0_Quickstart and start tomcat. The check
    http://centos:8080/flashaccessserver/flashaccess/license/v1
    is ok. But the log file say
    2011-04-21 15:57:59,122 FATAL [com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer][] - Could not open server properties
    java.io.FileNotFoundException
            at com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer.packagerSetup(RefImplPackage rServer.java:98)
            at com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer.run(RefImplPackagerServer.ja va:165)
            at java.lang.Thread.run(Thread.java:636)
    2011-04-21 15:57:59,125 INFO [com.adobe.flashaccess.refimpl.packager.RefImplPackagerServer][] - Exiting Packager thread.
    Which file is it refer to ?
    Where is the propert file to set this?

    Hello,
    It looks like at one time or another, you tried setting up the Flash Access Reference Implementation License Server.  Part of that package is a packaging server (which interfaces with a Graphical UI to package content).  The error you're seeing below suggests something from the Reference Implementation is left behind.
    I suggest doing the following:
    1. Shut down your Flash Access license server
    2. Remove the following from your <tomcat installation directory>/webapps
         2a. (file) flashaccess-packager.war
         2b. (directory) flashaccess-packager
    3. Remove the directory <tomcat installation directory>/work/Catalina
    4. Remove the directory <tomcat installation directory>/conf/Catalina
    5. Start your server
    Also - something to note is that your logfile seems to indicate only an issue was found with the packager deployment.  If there are no issues around the flashaccessserver, then your license server should still work, as those 2 different services (packager server & license server) are independent of each other.
    cheers,
    /Eric.

  • Adobe Captivate could not open "the file" Ensure that:

    Brand spanking new installation of the trail version of Captivate 5.5.
    Try to open a file a client sent to me.
    Receive message
    Adobe Captivate could not open "the file" Ensure that:
    -The files is not open already
    - The file is not damanged.
    -The hard disk has suffecient available space
    -The system has suffeicent resources.
    Researched the blog and tried 2 suggestions:
    1. Clearing the cache. Did not work. I do not have a cache folder. I haven't created a Captivate 5.5 project. I'm just trying to open a file sent to me.
    2. Tried deleted bak file. Didn't work. Captivate 5 keeps recreating the file.
    Other facts:
    Other people have been able to download the trial version and open the file.
    I have Captivate 4 on my machine.
    Any suggestions?
    Thanks

    I'm experiencing about the same problem:
    I made a software demo using Macromedia Captivate on computer 1 en sent it by e-mail to computer 2.
    On computer 2 I installed a Captivate 5.5 trial and I want to open the file in 5.5.
    The file is not locked as far as I know (I right-clicked the file > properties > unlock)
    I do have sufficiënt available space and resources. The file contains 135 slides but is not too large as I tried to do the same thing with a 50-slide file > same error message.
    I tried creating a new blank project > I copied the slides into the blank project, saved again on a local drive, sent it to computer 2 again, but same error message.
    Please help, I'm getting desperate.
    Marieke

  • Could not open .cp file in Captivate 5.5

    Hi all,
    I am now going to edit more than 30 files with ".cp" extension with Captivate 5.5 installed in my PC, the files are created in year 2011 and possibility created using previous version of Captivate.
    However it warned me that Captivate could not open the files
    As far as I know, Captivate 5.5 should be able to open previous version files, I searched on the web and most answers are referring to the link (http://www.infosemantics.com.au/adobe-captivate-troubleshooting/recover-corrupt-project) but I do not have any locked, backup or cache files, I suspect the files are not corrupted since I could not open all the files.
    Would like to know if there is any suggestion for my case?
    Really thanks!

    5.5 or 5 can open cp-files normally if they were not corrupted and didn't use AS2. Actionscript 2 is no longer supported since 5. Bit strange '2011' because cp-extension disappeared earlier. Is there no way to check in that 'earlier' version?
    Lilybiri

  • I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

    I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged.  To create a PDF document, go to the source application then print the document to .pdf"  I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file.  After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared.  How do I resolve this problem?

    I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
    the log says the bellow details...what's the problem and how can i resolve it? thanks.
    %%[ ProductName: Distiller ]%%
    %%[Page: 1]%%
    %%[Page: 2]%%
    Cambria not found, using Courier.
    %%[ Error: invalidfont; OffendingCommand: show ]%%
    Stack:
      %%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

  • I have a macbook pro with the latest update, and any Pdf file I have opened online or downloaded and I try to print it gives me this message Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or beca

    Adobe Reader could not open 'April-15th-2014-Messenger.pdf' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).

    Most likely http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html

  • I bought an ebook but when I  try to download it I receive a message stating 'Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wa

    Can anyone assist me? I keep receiving this message when I download my ebook ''Adobe reader could not open .....acsm because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't decoded).'
    Much appreciated

    I think you should ask in the Digital Editions forum, Adobe Digital Editions

Maybe you are looking for

  • How do I fix a charger that has been used on an incompatible device?

    I lent my charger to a friend, and when I got it back it started acting up. First it told me to reset my Ipod in Itunes, but before I could it suddenly refused to show up anywhere on my computer. It doesn't even register as a blank disk, and it doesn

  • N73 memory card

    My N73 is the Hong Kong IE version and I bought it in January. The problem is that the memory card just randomly removes itself during normal usage, once i even noticed that everytime I press the '3' key it just removes itself. Is anyone else experia

  • Thread Process is exiting without completing the process in SharePoint 2010 webpart

    We have implemented simple thread to process to excel upload into SharePoint 2010 custom list. Thread process running in local SharePoint 2010 environment (OS -Windows 7). Once we deployed in SharePoint server, Thread process is exiting without compl

  • Character palette super tiny

    Anybody know how to fix this? My character palette is opening up to be just big enough to see the red "close window" button in the top left corner of the window. I trashed my system preferences plist file; could not find anything specific to the char

  • Text doesn't show up after exporting

    When I export my file, the text that I put in the file with the text tool doesn't show up. Everything else is fine though. Someone please halp!