Adobe CC - Need help with billing and downloading apps

Hello,
I just signed up for a 1 year CC membership (includes all apps that are part of the Creative Cloud). Can you please let me know how i can receive a DVD so that i can easily install all the applications? Numerous applications are extremely large in size and i am unable to download them due to my slow internet connection.
Can you also let me know on which day exactly Digital River will charge my credit card each month? i just upgraded my membership a couple of hours ago.
Regards,
Raghu

Raghu do you have access to high speed Internet access at all? If so then you can download the installation files by following the directions listed at http://prodesigntools.com/adobe-cc-direct-download-links.html. Please make sure to complete the Very Important Instructions prior to clicking on the download link.
If you do not have regular access to high speed Internet access then I would recommend that you purchase and continue to use Creative Suite 6. While it is possible to request DVDa from our support team high speed Internet access is a system requirement. Without regular access you will face difficulty downloading and applying updates and new versions of the software as they are made available.
If you wish to request a DVD with the installation files from our support team you can contact them at http://adobe.ly/yxj0t6.
If you would prefer to cancel your membership and proceed with Creative Suite 6 then please see http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?start=10.

Similar Messages

HT204053 help with iphone and downloading apps

I have set up an apple ID. but when I try to download an app from my iphone it just says that my account has not yet been used in the itunes store and wont let me go any further. can you help?

Raghu do you have access to high speed Internet access at all? If so then you can download the installation files by following the directions listed at http://prodesigntools.com/adobe-cc-direct-download-links.html. Please make sure to complete the Very Important Instructions prior to clicking on the download link.
If you do not have regular access to high speed Internet access then I would recommend that you purchase and continue to use Creative Suite 6. While it is possible to request DVDa from our support team high speed Internet access is a system requirement. Without regular access you will face difficulty downloading and applying updates and new versions of the software as they are made available.
If you wish to request a DVD with the installation files from our support team you can contact them at http://adobe.ly/yxj0t6.
If you would prefer to cancel your membership and proceed with Creative Suite 6 then please see http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?start=10.

Still need help with flash player download

I'm still having a problem with the flash player, please read my last post below:
"I've tried everything here & still can't download the flash player. Anytime I try to download it asks me to install ADM add-on and then when I click on that, my computer freezes. How do I enable this add-on without my computer freezing? Can anyone help pls?"

Thanks a lot for your help, it is truly appreciated.
Date: Thu, 29 Oct 2009 18:52:38 -0600
From: [email protected]
To: [email protected]
Subject: Still need help with flash player download
You can set Flash Player to check for updates on the Global Settings Manager panel:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
>

MOVED: [Athlon64] Need Help with X64 and Promise 20378

This topic has been moved to Operating Systems.
[Athlon64] Need Help with X64 and Promise 20378

I'm moving this the the Administration Forum. It seems more apporpiate there.

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

Need help with trim and null function

Hi all,
I need help with a query. I use the trim function to get the first three characters of a string. How do I write my query so if a null value occurs in combination with my trim to say 'Null' in my results?
Thanks

Hi,
Thanks for the reply. What am I doing wrong?
SELECT trim(SUBSTR(AL1.user_data_text,1,3)),NVL
(AL1.user_data_text,'XX')
FROM Table
I want the XX to appear in the same column as the
trim.The main thing you're doing wrong is not formatting your code. The solution may become obvious if you do.
What you're saying is:
SELECT trim ( SUBSTR (AL1.user_data_text, 1, 3))
,       NVL ( AL1.user_data_text, 'XX' )
FROM    Tablewhich makes it clear that you're SELECTing two columns, when you only want to have one.
If you want that column to be exactly like the first column you're currently SELECTing, except that when that column is NULL you want it to be 'XX', then you have to apply NVL to that column, like this:
SELECT NVL ( trim ( SUBSTR (AL1.user_data_text, 1, 3))
            , 'XX'
FROM    Table

Need help with a Spreadsheet style app

I was just wanting some help in working with developing an app for my iphone... i had previous experience in microsoft visual basic but i don't quite understand this code....
I am in flight school and trying to develop an app that reflects the weight an balance forms we do... I am stuck on how to do basic multiplication and division with xcode, i have viewed several videos and tutorials but they each do things differently and i can't seem to bring it together into this app.
So in the picture below.... what i need help with is how to do the following
from
aircraft weight * arm = Moment outbound
front seats * arm = Moment outbound
to fuel @ landing
"0" fuel weight = aircraft weight + front seats + rear seats+ Baggage 1 + baggage 2
If anyone has any ideas or can lend me some tip or places that deal with stuff like this that would be great

A character class [...] robs some otherwise special codes from their magic. The +, for instance, is interpreted as a plus, not as "repeat ad nauseum" anymore.
So your try [\d+] will simply match either a single digit or a single plus. The solution is to move the + outside of the character class
[\d]+
.. and in that case there is no reason anymore to create a class for just digits, as you got it already.
The period *needs* to be escaped, because otherwise it will match *any* character.
Try this for a change:
\d+\.\d+

Need help with mac and java

Hi, I'm trying to develop an application on a Machintosh OSX 10.2.8 machine.
I'm having a herrendous time trying to get quicktime to work on it.
I've somehow managed t oget 1.3.1 and QTJava.jar to work together but now i need encryption, however that requires 1.4+
Now 1.4.1 doesnt work with quicktime
I've downloaded the latest software upgrades but Ive got no idea how to set up quicktime to work with java 1.4.1
Now to add on top of that mac reports it can use AES encryption. this is from source code ripped striaght from this website.
But first and foremost can anyone, annyonee help me out with setting up 1.4.1 with quicktime?
Thank you

If you need encryption with Java 1.3.1, download the JCE from either Sun (http://java.sun.com/products/jce/) or Bouncy Castle (http://www.bouncycastle.org/).
Cheers,
--Arnout

Need help with previously purchased download onto new computer

need help instaling old previously purchased photoshop elements 10 on to new computer. I do have the serial #. just cannot find where/how to do this.??

Hi jjwillis1 ,
Please click on the below mentioned link and expand photoshop elements 10
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Let me know if you need more info.
Thanks

I need help with a new download

I Subscribed to Adobe 9 Pro and downloaded it. However, when I try to open a document, I am sent back to the subscription page. Can you help me?

Hi jerryg47966889,
You must have signed in with your Adobe ID credentials while downloading Acrobat pro subscription.
Are you able to open Acrobat itself or not?
Do you get any specific message while opening a PDF?
Please let me know.
Regards,
Anubha

Need help with INSERT and WITH clause

I wrote sql statement which correctly work, but how i use this statment with INSERT query? NEED HELP. when i wrote insert i see error "ORA 32034: unsupported use of with clause"
with t1 as(
select a.budat,a.monat as period,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
c.wrbtr,
c.matnr,
c.menge,
a.monat,
c.zuonr
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='D'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,t2 as(
select a.BUKRS,a.BELNR, a.GJAHR,t1.vtweg,t1.budat,t1.monat from t1, ldw_v1.bkpf a
where t1.zuonr=a.xblnr and a.blart='WL' and bukrs='8431'
,tcogs as (
select t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
sum(bseg.wrbtr) as COGS,bseg.matnr,bseg.kunnr,sum(bseg.menge) as QUANTITY
from t2, ldw_v1.bseg
where t2.bukrs=bseg.bukrs and t2.belnr=bseg.BELNR and t2.gjahr=bseg.gjahr and BSEG.KOART='S'
group by t2.budat,t2.monat,t2.vtweg, bseg.gjahr,bseg.hkont,bseg.prctr,
bseg.matnr,bseg.kunnr
,t3 as
select a.budat,a.monat,b.vtweg,
c.gjahr,c.buzei,c.shkzg,c.hkont, c.prctr,
case when c.shkzg='S' then c.wrbtr*(-1)
else c.wrbtr end as NTS,
c.matnr,c.kunnr,
c.menge*(-1) as Quantity
from ldw_v1.BKPF a,ldw_v1.vbrk b, ldw_v1.bseg c
where a.AWTYP='VBRK' and a.BLART='RV' and a.BUKRS='8431' and a.awkey=b.vbeln
and a.bukrs=c.bukrs and a.belnr=c.belnr and a.gjahr=c.gjahr and c.koart='S'
and c.ktosl is null and c.gsber='4466' and a.gjahr>='2011' and b.vtweg='01'
,trevenue as (
select t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,
sum(t3.NTS) as NTS,t3.matnr,t3.kunnr,sum(t3.QUANTITY) as QUANTITY
from t3
group by t3.budat,t3.monat,t3.vtweg, t3.gjahr,t3.hkont,t3.prctr,t3.matnr,t3.kunnr
select NVL(tr.budat,tc.budat) as budat,
NVL(tr.monat,tc.monat) as monat,
NVL(tr.vtweg,tc.vtweg) as vtweg,
NVL(tr.gjahr, tc.gjahr) as gjahr,
tr.hkont as NTS_hkont,
tc.hkont as COGS_hkont,
NVL(tr.prctr,tc.prctr) as prctr,
NVL(tr.MATNR, tc.MATNR) as matnr,
NVL(tr.kunnr, tc.kunnr) as kunnr,
NVL(tr.Quantity, tc.Quantity) as Quantity,
tr.NTS as NTS,
tc.COGS as COGS
from trevenue TR full outer join tcogs TC
on TR.BUDAT=TC.BUDAT and TR.MONAT=TC.MONAT and TR.GJAHR=TC.GJAHR
and TR.MATNR=TC.MATNR and TR.KUNNR=TC.KUNNR and TR.QUANTITY=TC.QUANTITY
and TR.VTWEG=TC.VTWEG and TR.PRCTR=TC.PRCTR
Edited by: user13566113 on 25.03.2011 5:26

Without seeing what you tried it is hard to say what you did wrong, but this is how it would work
SQL> create table t ( n number );
Table created.
SQL> insert into t
2 with test_data as
3    (select 1 x from dual union all
4     select 2 x from dual union all
5     select 3 x from dual union all
6     select 4 x from dual)
7 select x from test_data;
4 rows created.
SQL>

I need help with CSS and floating

Okay, I know I need to get up on CSS and get rid of tables in
my sites.
However, I'm running up against a problem, and after banging
my head
against it for a while, I realize I need help. I've stripped
this down
so as to only show the area where I'm having difficulty.
What I want is a page that has everything down the center,
taking up no
more than 750 pixels and no more than 550 pixels of width. No
problem there.
After the header and the top content, I'd like to have two
"columns",
each in it's own separately-colored box. I would like the
right-side
column/box to be a static size, while the left-side
column/box sizes
dynamically.
Where I'm having problems is that when one column is boxed,
it's fine,
but whenever I wrap each column in its own box, the
fixed-size box
either jumps below or above the other box (depending on which
one has
been floated and which order the div's appear in the code).
Here are the links:
CSS:
http://www.afice.org/stylesheet/floatmestyles.css
ex 1:
http://www.afice.org/floatme1.html
ex 2:
http://www.afice.org/floatme2.html
Before sending, I took a look again, just to see if I was
missing
anything. I did notice that it doesn't seem to be that the
box is
jumping down so much as it is that it's getting written over.
Anyway, sorry for the long-winded explanation. I hope I've
managed to
explain what I'm trying to do well enough that someone can
tell me where
I'm going wrong.
Thanks,
--Kevin

Do you want something like this:
http://www.pmob.co.uk/temp/spointfooter.htm
You will need to look at the code to see how it was done.
Otherwise, there are different examples here on Pauls' site:
http://www.pmob.co.uk/temp/3colfixedtest_4.htm
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"Kevin D-R" <[email protected]> wrote in
message
news:[email protected]...
> Okay, I know I need to get up on CSS and get rid of
tables in my sites.
> However, I'm running up against a problem, and after
banging my head
> against it for a while, I realize I need help. I've
stripped this down so
> as to only show the area where I'm having difficulty.
>
> What I want is a page that has everything down the
center, taking up no
> more than 750 pixels and no more than 550 pixels of
width. No problem
> there.
>
> After the header and the top content, I'd like to have
two "columns", each
> in it's own separately-colored box. I would like the
right-side column/box
> to be a static size, while the left-side column/box
sizes dynamically.
>
> Where I'm having problems is that when one column is
boxed, it's fine, but
> whenever I wrap each column in its own box, the
fixed-size box either
> jumps below or above the other box (depending on which
one has been
> floated and which order the div's appear in the code).
>
> Here are the links:
>
> CSS:
http://www.afice.org/stylesheet/floatmestyles.css
>
> ex 1:
http://www.afice.org/floatme1.html
>
> ex 2:
http://www.afice.org/floatme2.html
>
> Before sending, I took a look again, just to see if I
was missing
> anything. I did notice that it doesn't seem to be that
the box is jumping
> down so much as it is that it's getting written over.
>
> Anyway, sorry for the long-winded explanation. I hope
I've managed to
> explain what I'm trying to do well enough that someone
can tell me where
> I'm going wrong.
>
> Thanks,
>
> --Kevin

If you need help with CPS and Contribute

After over a month of contacting support, I have come to the conclusion that Adobe does not offer advance support for CPS. The only thing that the low level tech support agents are capable of doing is
1. transferring you to someone else,
2. Sending you links to the online manual and livedocs that you have probably already read.
After spending over a month and roughly 100+ hours I have determine that CPS cannot handle multiple client certificates sent via a Department of Defense Common Access Card. I did learn the following info that you might find useful.
1.      Contribute must be able to write a file to the root (when you 1st connect it writes TMPjaisd8ua89ua.htm then deletes it) If this failes for any reason, contribute gives you the ever so helpful could not connect error
2.      contribute must be able to write / delete files in root/_mm
3.      If you want users to send drafts contribute must have access to root/MMWIP
4.      If you are using Contribute CS3 or newer and you remove a connection from a computer, the connection isn't really removed 100%, you must go into regedit, current user, software, adobe, contribute41 and clear out keystore, trusted CPS Server, Admin Servers. Just leave the defaults. This might be different for version 5
5.      Work with an LDAP admin to get the correct LDAP settings so CPS can view the directory
6.      If using multi LDAP servers ensure that replication is working correctly on them all otherwise your users won't be able to access the site if connected to a faulty LDAP server. Also make sure users can get to the directory via windows if using local/Network connection
7.      Work with Network admin to have security logging enable on the web server so anytime contribute gives an error they can check the log to see exactly what your account was trying to do at the time of the error.
8.      Read the Manuals, in fact memorize them.
http://help.adobe.com/en_US/Contribute/4.1_CPS/help.html?content=con_overview_ov_3.html
http://help.adobe.com/en_US/Contribute/4.1_CPS/help.html?content=con_setup_install_si_18.h tml
http://livedocs.adobe.com/contribute/311/deploying_en/wwhelp/wwhimpl/js/html/wwhelp.htm?hr ef=00000049.htm#134387
I hope this will shed a little light on CPS and contribute or if not then at least give you some direction on how to debug your problems since Adobe will never help you.

Addition:
9.      Create a folder on your desktop called "ctnetperformancelog" and then launch Contribute. Information logged in these files can provide invaluable insight in pinpointing where problems originate.
For example:
135 07/05/11 12:31:53 PM mmoreno netio/LAN PutData ACCESS_DENIED 5 5 0.0017 file://webdev/Dev/ /Dev/_mm/contribute.xml
This was the result of /_mm/contribute.xml inadvertently being marked read-only due to a dreamweaver misconfiguration.
See http://kb2.adobe.com/cps/195/tn_19506.html for more details.
Don't forget to delete or rename this folder (e.g. "ctnetperformancelog-DISABLED") after debugging since the log files can grow quite large.

Noob needs help with Logic and Motu live setup.

Hello everyone,
I'm a noob / semi noob who could use some help with a live setup using 2 MOTU 896HD's and Logic on a Mac.
Here's the scenario:
I teach an outdoor marching percussion section (a drumline and a front ensemble of marimbas and vibes). We have an amazing setup of live sound to amplify and enhance the mallet percussion. There is a yamaha PA system with 2 subs and 2 mains which are routed through a rack unit that processes the overall PA balance. I'm pretty sure that the unit is supposed to avoid feedback and do an overall cross-over EQ of the sound. Other then that unit, we have 2 motu896hd units which are routed via fire-wire. I also have a coax cable routing the output of the secondary box to the input of the primary box (digital i/o which converts to ADAT in (i think?)..?
Here's the confusion:
There are more then 8 inputs being used from the ensemble itself, so I need the 16 available inputs to be available in Logic. I was lead to believe that the 2nd motu unit would have to be sent digitally to the 1st motu unit via coax digital i/o. Once in Logic, however, I cannot find the signal or any input at all past the 8th input (of the 1st unit).
Here's the goal:
All of my performers and inputs routed via firewire into a Mac Mini running OSX and Logic pro.
I want to be able to use MainStage and run different patches of effects / virt. instruments for a midi controller keyboard / etc.
I want to be able to EQ and balance the ensemble via Logic.
Here's another question:
How much latency will I be dealing with? Would a mac mini with 4gb of ram be able to handle this load? With percussion, I obviously want the sound as latency free as possible. I also, however, want the flexibility of sound enhancement / modification that comes with Logic and the motu896hd units.
Any help would be REALLY appreciated. I need the routing assistance along with some direction as to whether or not this will work for this type of application. I'm pretty certain it does, as I have spoken with some other teachers in similar venues and they have been doing similar things using mac mini's / logic / mainstage / etc.
Thanks in advance,
Chris

You'll definitely want to read the manual to make sure the 896HDs are connected together properly. ADAT is a little tricky, it's not just a matter of cabling them together. Go to motunation.com if you need more guidance on connecting multiple devices. Beyond that initial hookup, here are a couple of quick suggestions:
1. Open CueMix and see if both devices are reported there. If not, your connections aren't correct. Be sure to select 44.1kHz as your sample rate, otherwise you are reducing the number of additional channels. For instance at 88.2kHz you would get half the additional channels via ADAT.
2. You may need to create an aggregate device for the MacBook to recognize more than the first 896HD. Lots of help on this forum for how to do that. Again, first make sure you have the 896HDs connected together properly.
3. As for latency with Mainstage on the Mini, no way to know until you try it. Generally MOTU is fantastic for low latency work but Mainstage is a question mark for a lot of users right now. If the Mini can't cut the mustard, you have a great excuse to upgrade to a MacBook Pro.

Adobe CC - Need help with billing and downloading apps

Similar Messages

Maybe you are looking for