Adobe Drive 3 CMIS work with SharePoint 2013? (Getting errors)

Hello guys.
I'm trying to use Adobe Drive 3 with SharePoint 2013 to sync a folder by CMIS without success.
I get a "Drive already mounted" message with an "Invalid location" error. Already tried using rest and soap url's, and on the SharePoint, the CMIS is
enabled as well as the basic authentication (and the credentials are correct).
Here's my Drive log (http://tny.cz/694b8841)
I believe that this is a SharePoint problem maybe, but I don't know what to look at. Can someone help me on this?
And also, is there anyone that have already did this? (Drive 3 + SharePoint 2013 CMIS).
Thanks in advance,
Matheus Barreto.

Found it only work with Asset Libraries type of library on SharePoint, but even this way, on my Windows side I get a error about the drive the Adobe Drive create... My conclusion for now is that it does not work.

Similar Messages

  • Will Office Web Apps Server 2013 work with SharePoint 2013 sites hosted in SP2010 compatibility mode?

    We are planning a upgrade of a SP2010 farm to 2013. There has been a bit of customization so we wish to run the old sites on the new SP2013 platform in SP2010 compatibility mode.
    So my question is will Office Web Apps Server 2013 work with the old sites hosted in compatibility mode?
    I found a similar query from March 2014 found here 
    http://sharepoint.stackexchange.com/questions/93101/office-web-apps-2010-running-on-sharepoint-2013-for-compatibility-mode-sites/116281#116281 
    Has there been an update released to resolve this
    Cheers D

    Hi  ,
    According to your description, my understanding is that you need to know whether Office Web Apps 2013 is working with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode.
    For my test, Office Web Apps 2013 with SharePoint 2013 sites which is in SharePoint 2010 compatibility mode is working fine.
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Configuring Adobe Acrobat XI Pro with SharePoint 2013

    Hello,
    There are multiple questions whose clarifications are required.
    Situation: Users need to open the documents in browser, check-out, edit, add comments/annotations and check-in without using Client Acrobat Reader.
    Based on the above situation, please let me know about the following:
    1. Is it mandatory to buy Adobe Acrobat XI Pro license to integrate with SharePoint 2013?
    2. Is Office Web Apps Server 2013 cannot provide the functionality as per situation so that i don't need to buy licenses for Adobe Acrobat XI Pro?
    3. If point no 1 is Yes then what is the procedure of configuring/enabling Adobe Acrobat XI Pro with SharePoint 2013.
    Thanks.
    Sohaib Khan

    What are you editing, if the answer is PDFs as a suspect it is then you will need a PDF editor such as Adobe Acrobat on each user's desktop to edit PDFs. OWA isn't a PDF editor as far as i'm aware.
    As such you'll need licenses for an editor for each user.
    The process for integrating the two is pretty straight forward, you set, either by GPO or individually, the default application for PDFs to be Adobe Acrobat.

  • Excel 2013 Data From Web not working with SharePoint 2013?

    In Excel 2013, on the ribbon select the 'Data' tab and 'From Web' to import data from a web page. Navigate to a SharePoint 2013 site with a table on the home page and you will not see the table import arrow on the table. With SharePoint 2010 you would have.
    Any suggestions on a workaround/fix?
    One thing to note, in SharePoint 2013 be sure to disable the Minimum Download Strategy feature on the site or you will get script errors in the New Web Query dialog.
    Also, I realize this may belong in an Office/Excel forum so I have posted it there also.
    Thanks, Fintan

    Hi Fintan ,
    According to your description, my understanding is that the Excel table import arrow   disappears  in the  SharePoint 2013 page.
    For your issue , I can reproduce your scenario in my SharePoint 2013 environment. It should be caused by the Excel  Data connection from web page feature cannot identify the page layout  which is
    used by SharePoint 2013 . For a workaround, you export the HTML table using jQuery:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/30fc097f-256c-48d9-8b6c-cb821a504045/problem-while-exporting-html-table-to-excelcsv-in-sharepoint-2010?forum=sharepointgeneralprevious
    http://community.office365.com/en-us/b/office_365_community_blog/archive/2013/07/31/how-to-use-power-query-for-excel-to-query-a-sharepoint-2013-list-grid-user-post.aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Does ADFS work with SharePoint 2013 with WFEs SSL-offloaded to a F5 load balancer?

    Currently we are implementing a SharePoint 2013 Production environment with 2 WFEs load-balanced by F5.  SSL is offloaded to F5 and is currently working fine with Integrated Windows Authentication with NTLM.  We would like to implement ADFS 3.0
    later for Single Sign-on, and we are wondering if ADFS supports SSL offload.  
    Do we need to bind the certificate to the WFEs as well to use ADFS?  
    Thank you!

    Just got it confirmed that ADFS supports SSL offload.  There is no direct communication between SharePoint and ADFS server during the authentication process.  It is always the browser that's talking to ADFS server. We just need to do the following:
    Configure SharePoint URLs in ADFS as replying parties with https.
    Configure AAM in SharePoint to make sure internal URL is http and public URL is https.

  • Can fill-able forms created in Acrobat 9 work with SharePoint 2013 workflow?

    Okay so here's the deal.....
    I have a few HR forms that need to be searchable and created as workflows in SharePoint 2013. Creating a custom list will not work because it is not a built to create forms. Integrating InfoPath would be ideal, but it will not work either because the company
    will not pay for Enterprise licensing.
    So my question is....what if I created a fill-able form in Acrobat and uploaded to SharePoint. Can I create a workflow from the document. The only question is, when the user fill out the form, where it will go? There is no submit button.
    I guess the REAL question is, other than InfoPath, is there a work around to having forms on SharePoint that can be created as a workflow and made searchable. Did I mention that the forms must be fill-able.
    Hope I make sense.
    artisticweb

    No, you cannot submit form values of a acrobat to SharePoint. You can use list form for basic form, else try using jquery to build custom forms as an alternative for infopath. Refer to the following codeplex solution. You could use this or build one similar
    to that using the source code.
    http://forms7.codeplex.com/
    --Cheers

  • Working with WebLogic81sp2 and getting error while processing a file.

    Hi,
    getting error while working with the weblogic81sp2 and java based application. In this m processing a file. the file gets processed but doing command 'ps -ef' shows process still running. The exception log is like:
    <26-Mar-2008 10:10:48 o'clock GMT> <Warning> <WebLogicServer> <BEA-000337> <ExecuteThread: '21' for queue: 'weblogic.kernel.Default' has been busy for "645" seconds working on the request "Http Request: /shield/xml", which is more than the configured time (StuckThreadMaxTime) of "600" seconds.>
    <01-Apr-2008 06:50:00 o'clock BST> <Error> <HTTP> <BEA-101017> <[ServletContext(id=197633402,name=/shield,context-path=/shield)] Root cause of ServletException.
    javax.servlet.jsp.JspException: Can't insert page '/jsp/layouts/mainLayout.jsp' : Broken pipe
    at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.processException(Ljava.lang.Throwable;Ljava.lang.String;)V(InsertTag.java:956)
    at org.apache.struts.taglib.tiles.InsertTag$InsertHandler.doEndTag()I(InsertTag.java:884)
    at org.apache.struts.taglib.tiles.InsertTag.doEndTag()I(InsertTag.java:473)
    at jsp_servlet._jsp.__main._jspService(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(main.jsp:2)
    at weblogic.servlet.jsp.JspBase.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(JspBase.java:33)
    at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:971)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:402)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:305)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(RequestDispatcherImpl.java:301)
    at org.apache.struts.action.RequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:1069)
    at org.apache.struts.tiles.TilesRequestProcessor.doForward(Ljava.lang.String;Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(TilesRequestProcessor.java:274)
    at org.apache.struts.action.RequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(RequestProcessor.java:455)
    at org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;Lorg.apache.struts.config.ForwardConfig;)V(TilesRequestProcessor.java:320)
    at org.apache.struts.action.RequestProcessor.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(RequestProcessor.java:279)
    at org.apache.struts.action.ActionServlet.process(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(ActionServlet.java:507)
    Please help me!

    Not sure why you want to replace. Since the response of the proxy would remain to hold the request body by default.
    If you have stored the opaque element in a variable ($var_opaque), then you can do the following.
    XPath : .
    In variable : body
    Expression : $var_opaque
    Check - "Replace node content"

  • Working with Coreco, I get error 1074396072: imaq morphlogy invalid image border

    the morphology gets input from threshold, which send o.k in error out. I work with Coreco, which I heard has some problems in defining the camera type or something

    The morphology function requires some blank space at the edges of the image, which is called a border. You can set the size of the border when you create the image buffer, and you can adjust the size of the border using IMAQ ImageBorderSize.
    Bruce
    Bruce Ammons
    Ammons Engineering

  • No access with SP Designer 2010 after change to FBA and Windows at the same time - Does this work with SP 2013

    Hi All,
         It seems you can't use SharePoint Designer 2010 to open a site if you have both forms and Windows Auth selected.
    Is there any way around this if i want to use the 2 at the same time?
    How does this work with SharePoint 2013 as i would be doing some migrations?
    Cheers in Advance

    Hi,
    As I understand, you encountered the issue after you selected both FBA and Windows Authentication at the same time.
    As I test, I can open the SharePoint 2010 site using FBA and Windows Authentication by SharePoint designer 2010. When you open the site first,
    you will get a dropdown menu where you can choose between the 2 authentication mechanisms.
    After you choose one of them, you can open the site.
    https://onedrive.live.com/redir?resid=40B702A9FB117DD!136&authkey=!ABtMg5n3OtPakCg&v=3&ithint=photo%2cPNG
    When I open the SharePoint 2013 site using FBA and Windows Authentication by SharePoint designer 2013, I also get
    a dropdown menu where I can choose between the 2 authentication mechanisms. I can open the site after I choose one of them.
    So I think there are some other reasons to cause the issue.  
    Check these things below:
    1. Check if you have the permission to open the site in SharePoint designer (Site Permission > Permission Level in ribbon > Click the permission you belongs to > Ensure Use Remote Interfaces is selected).
    2. Check if you have enabled the SharePoint designer to open the SharePoint site. (Select the web application hosting the site collection using the FBA and windows authentication >Central Administration website > General Application
    Settings > SharePoint Designer > ensure Enable SharePoint Designer
     is selected).
    3. Is there any error when you open the site in SharePoint Designer? If there are any errors, could you please provide it here for further research?
    More references:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/2a3c022c-f924-4b38-be02-5c5ac7a2927e/cannot-open-sharepoint-site-using-sharepoint-designer-2010-get-a-popup-with-4-possible-causes?forum=sharepointgeneralprevious
    https://social.msdn.microsoft.com/Forums/office/en-US/19628c53-fde2-44b0-806c-64f67263c931/cant-open-sharepoint-site-with-sharepoint-designer-2010?forum=sharepointcustomizationprevious
    Best regards
    Sara Fan
    TechNet Community Support

  • Integrate SSRS Native Mode with Sharepoint 2013

    Hi, I have read numerous posts that go back and forth on the question "is SSRS Native Mode supported to work with SharePoint 2013?" and it seems like the answer is no, it is not. Even with SP1 like some people suggested it seems like it is impossible
    to integrate the two.
    In this case is the next step simply to somehow (IIS?) route the Report Server Web Service URL to a SharePoint page?
    What should I do with the fact that everyone in my domain can access the above mentioned URL?
    Thank you for any and all answers, I appreciate it!

    Hi Nestalna,
    As per my understanding, you want to allow everyone in your domain to access Report Server Web Service URL, but you don’t know how to grant permissions, then you think we can control permission using sharepoint, right?
    In native mode, we can grant permissions to access Report Server Web Service URL by following steps:
    From the Start menu, point to Programs, point to Administrative Tools, and then click Computer Management.
    Click to expand the Local Users and Groups node.
    Right-click Groups, then click New Group, type the name and description, then add domain users to the group.
    Start Report Manager.
    Click Site Settings.
    Click Security.
    Click New Role Assignment.
    In Group or user name, enter the group you created above.
    Select a system role, and then click OK.
    In this way, domain users can access report manager. If they want to view, add, and manage report server content, subscriptions, report processing, and report history, we need to assign Item-level role on specific folders or items to them. Besides, in earlier
    version of SQL Server 2012, we can configure Reporting Services to native or sharepoint integrated mode, from SQL Server 2012, we can configure Reporting Services to native and sharepoint integrated mode.
    For more information about Grant User Access to a Report Server, please refer to the following document:
    http://technet.microsoft.com/en-us/library/ms156034(v=SQL.105).aspx
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • How can i get the Adobe plug in to work with Visio 2013?

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues visio 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    Should have purchased XI. According to Compatible web browsers and PDFMaker applications you will need Acrobat 11.0.1 -and- to be running the 32-bit Visio.

  • Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this applicati

    Hi there, I cannot open bridge and I get this warning, "Adobe Bridge Cannot be Opened because of a problem. Check with the developer to make sure Adobe Bridge CC works with this version of Mac OS X. You may need to reinstall any updates for this application and Mac OS X" although bridge has been running on my Mac for over a yera. I have installed all current updates for Mac and reinstalled Bridge again from CC and still get the same issue? Any advice?

    Would you please provide details about your setup?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Work Manager Configuration Issue with SharePoint 2013

    Hi,
    We are facing issue to configure the Workflow Manager with SharePoint 2013.
    ===========================================================
    Please provide any solution/inputs to resolve this issue.
    Thanks.

    Hi ,
    According to your description, my understanding is that you got an error when you configured Workflow Manager for SharePoint 2013.
    For resolving your issue, please do as the followings:
     1.Start -> Programs -> Workflow Manager 1.0 -> Workflow Manager Configuration -> Remove from Farm     (not to be confused with SharePoint “farm”)
     2.Drop SQL databases for Workflow Manager.   (SbGatewayDatabase, SbManagementDB, SBMessageContainer01, WFInstanceManagementDB, WFManagementDB, WFResourceManagementDB)
     3.Start-> Programs-> Workflow Manager 1.0 -> Workflow Manager Configuration -> Configure Workflow Manager with Default Settings (Recommended)
     4.Ran the wizard just like before and it should be completed successfully this time.
    More information, please refer to the link below:
    http://www.spjeff.com/tag/workflow-manager-1-0/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Does Adobe Photoshop Elements work with MacBook Pro with Retina display?

    Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please?
    Have searched Adobe website for answer - most recent is 2013 answer, saying no.
    Contradicted by a staff ember who only referred to Photoshop, not Elements.
    Reason I need it is that iPhoto does not support very high resolution photos - which I have now scanned onto my MacBook and do not want to re-scan!! After 90 minutes at my local Genius bar (lovely folk, very conscientiously searching for an answer...), re-scanning was their final piece of advice.
    Help, please...

    Hello Smis,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand you are having issues with your HP Monitor on your MAC. I am providing you with an HP Support document: Updating a Monitor Driver, where it states under the sub-heading Using HP monitors on a Mac "HP monitors are not supported in a Mac environment. However, newer Macs use graphics with VESA modes and can display to most HP LCD monitors. To do this, connect the monitor to the Mac while the Mac is off, and then turn on the MAC. The monitor should operate at 60Hz. The INF and software for the HP monitor are for Microsoft Windows and cannot be run in a standard MAC OS environment."
    This being said all I can advise is that you check to see that the monitor is set to operat at 60Hz and contact Apple for assistance if that does not get your monitor displaying correctly.
    I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Issues with SharePoint 2013 after upgrading from windows 2012 to 2012 r2

    We have a Sharepoint with Sp1 environment on windows 2012. Recently we upgraded the windows 2012 to 2012 r2. After the upgrade sharepoint environment is completely unstable.
    At first all the sites returned 401 errors. After resolving by resetting the object cache accounts the sites are back.
    Then i see that none of the performance point dashboards work. I figured that claims to windows token service is defaulted to local system account. I previously configured with a domain account. I reconfigured to work with domain account. 
    All the dashboard pages throw error.
           Some Error logs:Failed to get document content data. System.ComponentModel.Win32Exception (0x80004005): Cannot complete this function     at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow 
    Application error when access /Dashboards/Performance Dashboard/Main.aspx, Error=The EnableScriptGlobalization property cannot be changed during async postbacks or after the Init event.   at System.Web.UI.ScriptManager.set_EnableScriptGlobalization(Boolean
    value)    
      4.  I tried to create a new dashboard and this time the performancepoint designer wont launch. After some troubleshooting i see that c2w host file didnot have the caller  C:\Program Files\Windows Identity Foundation\v3.5. 
           I added <add value="WSS_WPG" /> and now it launches
      5.  Now the Dashboard launches and peruser identity works without having kerberos enabled at IIS. I have all the spn and required delegations setup for this url . But i did not configure at the IIS level
    yet.
    It looks like lot of things got messed up and reset. Can we upgrade to windows 2012 r2 with a sharepoint application inplace. what is the recommended approach and Whats happening with Performancepoint dashboards. IS there a known issue with sharepoint 2013
    sp1.
    Raj-Shpt

    Thanks for the above article. Few issues are solved . One of the main issue is with Performancepoint Dashboard.
     I have all the spn and required delegations setup for this url . But i did not configure at
    the IIS level yet. Still per user identity works without having kerberos enabled at IIS.
    Raj-Shpt

Maybe you are looking for

  • How to set-up my home intranet using 2 different ISP's ?

    I have had so much trouble recently with my main (8 years now!) internet provider "ABC" (not the real name) Cable Modem here in Belgium that I made the decision to pay another bunch each month to have a second ISP for my home and home office. "XYZ" (

  • Music won't download on all my devices via iCloud. Help?

    Hi,  I have an iPad 2 and an iPhone 4 and I depend a lot of iCloud. I would be lost without it. One annoying thing that is happening is that when I purchase music on my iPhone, it won't download automatically on my iPad. And the other way around. If

  • NO_MORE_SPACE error

    Hi all, Process chain cancelled at start variant with NO_MORE_SPACE error. The log displays the message as : "NO_MORE_SPACE: Can not create MTE: no more space: no more MESSAGE_CONTAINER slots available" There are no short dumps at the time of this pr

  • Has anyone any experience with a USB-6008 and reading a thermistor value

    Labview 8.0 connected to a USB-6008 I am using 'BC Components' NTC Thermistor. I used the express VI to create a Vex input and entered the A,B,& C values from the datasheet. The thermistor is the 10K version and I placed a 10K resistor in series with

  • Nokia Suite/NSU Update

    Hi all There are some discussions that Belle has started rolling out... Cool. There is no mention of updating via NSU, especially for users, like myself, who experienced problems with the Nokia Suite since it was launched. Can somebody confirm (Nokia