Adobe Flash bug

I just got off the phone with Adobe support regarding my inability to play YouTube or Facebook videos on either Safari or Firefox.  After hearing that they want me to pay $39 to get the fix, I decided to wait for their patch.  The agent didn't know when it would become available and he said that there would NOT be notification of it's release.  Evidently if I had paid the $39 he would have given me a way to fix it.  Does anyone out there know what that fix might be?  Firefox is my browser of choice and it's very annoying to have to switch to Chrome to view a video.  I have downloaded the latest Adobe Flash release 11.1.602.167 and that seems to be the culprit.  It must work for some folks or I think we'd be seeing more questions posted.  My Safari also flickers when I go to a Top Site page and I'm hoping that the new patch will fix that as well.  I like the new features in Mountain Lion but miss the ability to play videos in Snow Leopard. 

Thanks, I'll try that for the Top Sites fix and hopefully I'll be able to watch FB videos, too.  Strange that I can watch YT videos on Safari but not FB videos. 
I downloaded the latest version of Flash, 11.1.602.167, that was released on February 12, 2013.  The Adobe agent was very aware that there were problems with Safari and Firefox and told me to use Chrome till the patch was released.  That said, the HTML5 mode seems to be the answer.  I don't know that I'll go back to Adobe Flash unless I need to. 
Trust me.....I've installed the latest version of Adobe many times in the last few days.  Uninstalled and reinstalled.  When I go to the troubleshooting page on the Adobe site on Chrome it shows the latest version, since it's embedded in the browser.  I even followed advise to uninstall and reinstall an older version of Flash and that wouldn't work for me either.  It's been very frustrating.  I cannot thank you enough for enabling me to go back to Firefox.  Again, thank you!

Similar Messages

  • HELP Adobe flash drive update BUG?? Big Problem

    I bought a 13 inch MacBook Air in August 2014.
    OS X Maverick, Version 10.9.4. 4 GB memory, 256GB storage.
    I have been using Safari to see lecture videos from Echo360, and they have been working well despite the slow internet of the country.
    Just until two days ago, everything had been working fine, until a Adobe Flash Driver Update popped up on my screen.
    At first I ignored it (b/c I usually dont care about using the latest versions; the lecture videos had been working perfectly)
    but it kept popping up so I clicked update.
    The next day, my mac kept losing connection to internet every 1-3 minutes, such as "resolving host" messages.
    The videos kept crashing and I had to re open the page, refreshing wouldnt work. about 15 times for a 50 minute video.
    I erased the Flash Driver.plugin from my internet plug-ins in the library, and the internet came back alive.
    I was guessing the "updated" plugins were eating up my internet/browser...
    So then I downloaded chrome so I wouldnt have to manually use adobe anymore,
    and now, the videos keep freezing at random moments at about 5-10 minute intervals. Now that the internet is back alive, i just have to refresh the page, which still takes forever to load...fortunately the browsers dont crash anymore...
    Right then, I completely disposed anything related to adobe flash drive. I still have Adobe pdf which works great.
    But even after, it kept freezing...
    Maybe I was thinking this is normal when watching videos on chrome b/c the plug ins are not manually stored in my mac?
    If not, what is causing the freezing of the videos on google chrome? (i dont think my mac is losing internet connection anymore every second like yesterday)
    Is there any way to fix it? Is it from yesterday's history of downloading the "update"?
    I just want to be able to watch my lecture videos like I normally did the past two weeks, before I downloaded the "update"
    and now I am afraid that downloading adobe might crash my internet/browsers again.
    It took me several hours to come to erasing the "updated" plug ins as I am fairly a noob in computers.
    I spent a lot of time and researched a lot up till 5AM in the morning just last night.
    and I have exams coming up next week... I would really want this to be resolved.
    Should I try downloading adobe from its actual website and see what happens?
    If yes, which versions would you recommend?
    Yesterday when I checked after the update, it stated the most current Adobe 15.
    If this contains bugs for mavericks, I would rather do older versions.
    I do not know which version I was using before the "update" when everything worked perfectly.
    Thanks for reading all this
    I know I am all over the place; Im just very frustrated and desperate as not knowing what to do....
    I just want my mac to work like before I clicked on the "update"
    Any help will be greatly appreciated
    Thank you

    You probably installed some kind of malware pretending to be a Flash update. That's very common.
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Adobe Flash Player 10.1.82.76 update just released (fixes SWF in PPT bug)

    Hi,
    If you are using the Adobe Flash Player make sure you update to Adobe Flash Player 10.1.82.76 ([released by Adobe on August 10th 2010|https://www.adobe.com/support/security/bulletins/apsb10-16.html]).
    As well as having the latest security fixes this update also fixes the Adobe Flash Player bug that stopped Xcelsius SWFs from working when you embedded them into a PPT: https://www.adobe.com/support/security/bulletins/apsb10-16.html
    FYI: Xcelsius is based on Adobe Flex and this bug also affected any Adobe Flex based SWF that was embedded into a PPT not just Xcelsius.
    Regards
    Matt

    Hi,
    If you are using the Adobe Flash Player make sure you update to Adobe Flash Player 10.1.82.76 ([released by Adobe on August 10th 2010|https://www.adobe.com/support/security/bulletins/apsb10-16.html]).
    As well as having the latest security fixes this update also fixes the Adobe Flash Player bug that stopped Xcelsius SWFs from working when you embedded them into a PPT: https://www.adobe.com/support/security/bulletins/apsb10-16.html
    FYI: Xcelsius is based on Adobe Flex and this bug also affected any Adobe Flex based SWF that was embedded into a PPT not just Xcelsius.
    Regards
    Matt

  • Adobe flash player 11 local storage bug

    I have adobe flash player 11.0.1.152 installed on Windows 7 x64 ENT
    The bug:
    Flash player allow / deny button is unclickable thus video cannot be played.
    this happens when i check ask me before allowing new sites to save information on this computer in storage tab in Global Settings. 

    by the way this happens in other sites except youtube and other applications such as steam
    browser
    Firefox 7.0.1
    IE 9
    this is unaccebtable coz i visit many gaming sites and i have to watch trailers, gameplay, etc
    i have no way watching the video but to change the global settings to allow all sites to save blah blah

  • Adobe Flash Player 11.3.300.257 bug

    Adobe Flash Player 11.3.300.257
    firefox 12
    windows 7 famillial 64 bits sp1
    processeur dual core 8500
    carte video nvidia 560gtx 1go
    carte son creative x-fi  64 mo
    5 go ddr2
    quand je vais ecouter de la musique sur youtub image saccade et son decaler puis crash du systeme adobe flash player 11.3.r300 ne fonctionne plus windows se met a chercher la cause j'ai dut reinstaller la version 11.2.202.235 et la tout refonctionne donc la mise a jour et a revoir au niveaux de la compatibiliter tous mes programmes son a jour sauf   adobe flash player 11.3.300.257

    Il s'agit de la version en langue anglaise du Forum Adobe -
    Vous voudrez peut-être poser votre question sur le forum Adobe langue française.
    http://forums.adobe.com/community/international_forums/francais

  • I'm getting a weird lag bug in adobe flash on my macbook where when I move my cursor no lag happens but when I stop I get lag from chatroom? Is there a fix? I'm on Mavericks.

    Not does it only lag but the animations stop in the ads and in people avatars because some of the people there are running animated avatars. I just found it weird when I moved my cursor it stopped lagging, but when I leave my cursor still the chat freezes/lags. I would have blamed the specs on my older Macbook but why would the animations run fluid on Safari when my cursor moves?
    Adobe Flash chatroom: http://xat.com/chat
    Specs: Macbook May 2009 13" 2.13ghz 4gigs ddr2 ram with a 240gb ssd harddrive
    Operating System: Mavericks

    I think you can thank Apple for this.  See this discussion.
    Photoshop CC: MacOS 10.10 Yosemite: Graphics driver problem
    Nancy O.

  • Adobe Flash Player 11 ActiveX version 11.9.900.170 Bug; unknown background audio playing

    1/13/2014 I download Adobe Flash Player 11 ActiveX version 11.9.900.170 for the 5th time in over a week and keep getting a corrupted version that is playing audio from a unknown source when I am not on the internet but using one of my software. I have downloaded with abc go.com and NFL.co and I get the audio in background that is not part of what I am watching and can not turn off because it is playing thru your player software. I uninstall it and no audio, as soon as I download it again the same problem, then I have to uninstall gain, I just uninstalled again.

    Flash Player is"playing" the audio... IT ISN'T CAUSING IT.
    You have what's known as "adware" that has hijacked your browser.
    Usually it opens a window with a javascript, either minomized, or as a "popunder" or it can set it to open "offscreen", and then it plays where you can't see it to close it. You need to run a thorough system scan, and check your browser plugins, as well as look for suspicious programs in your Control Panel's Add/Remove Programs or Programs and Features section.
    Again, Flash Player ISN'T the cause. It's just the mechanism by which this malware is delivered.

  • Bugs? Pop-ups with raw footage appearing after Adobe Flash Player down-loaded.

    Hello! I am confused about what is appearing with my downloading Adobe Flash Player. I have used it before without problems but then I had to download it again to start holiday photos about 10 days ago. I immediately received pop-ups with raw footage (porn) on it. The ads said they were by 'bettersurf,' and 'done...' (something, I can't remember.) They would just pop-up in the middle of anything I was working on. I contacted Windows because it had a logo that looked like Adobe but it said that the windows media player needed to be updated. I'm good on all of that - no need to update. The only way to make it stop (I even blocked the sites from access, had the safety controls on 'strict' and parental safeguards on) was to turn off Adobe Flash Player. Well, I need to get the cards done and so I downloaded it again (with some difficulty I want to add even though I followed instructions to a 't'.) Sure enough I am getting pop-ups from the same ad company as before. I haven't yet seen porn but I'm suspicious. My system is 11.9.900.152 (64) Windows 7. Hopefully I have that right, I think that is the first no. When I check to see if Adobe Flash Player was downloaded correctly, etc. it verifies that it is. Can somebody help me? My daughter is young and I watch her when she is on the computer (I'm actually sitting right with her the whole time,) so I am positive she hasn't downloaded something wrong. And I want to add again that my settings are on strict, pop-ups turned OFF....and the pop-up regarding updating windows to have the flash player work correctly looks very much like a legit site - but I know it isn't.
    Thank you so much for any words of advice.

    You're infected.
    Those ads DON'T come from Flash Player (or Adobe), but they DO use it to display.
    Run a thorough virus scan, and download TDSSKiller to look for "adware".

  • Firefox 33.1 does not load Adobe Flash Player 15.0.0.223

    As far as I can determine, Firefox 33.1 does not load Adobe Flash Player 15.0.0.223 (identified on the Plug-ins list as "Shockwave Flash 15.0.0.223") when I access most of the pages on the MSN website. Whether it will display any specific video is unpredictable but it displays about one out of five.
    If I place the mouse cursor on the blank black video display area (for which no controls or buttons are displayed), and click the right mouse button, then either (1) the context menu is the same as for clicking the mouse cursor on an empty part of the page, or (2) the context menu is not displayed at all.
    Apparently, Firefox has failed to load the plug-in, but does not display any error message. Neither is there any error message displayed by the plug-in.
    If you think I am willing to undertake a trial-and-error odyssey through various "do this and see what happens" recommendations in "Knowledge Base" articles and the like, then think again. I don't have the time to make the effort, and I will use Internet Exporer instead. It ought to work with MSN just fine. :-)
    Since I did not develop Firefox, this is not my problem to solve. It's your software, not mine, and I didn't make the mistakes, so you fix it.
    By the way:
    Either Firefox Help does not display the version correctly, or your Troubleshooter doesn't obtain the data correctly. Help says version 33.1 and Troubleshooter says 33.0. YES I KNOW THAT FIREFOX 33.1.1 IS AVAILABLE. SO WHAT?
    Troubleshooter also identifies the Shockwave Flash plug-in as "15.0 r0" but the native Add-ons feature identifies it as 15.0.0.223 -- which is the version that Adobe uses.
    The last line of the Troubleshooter's "educated guesses" just has "* 5.1.30514.0". I have no idea as to what that refers to and I doubt that anyone else would have one either.
    Well, maybe those numbers are good enough for "educated guessers" but in my experience computers do not make "educated guesses" even if software developers do.
    Enjoy!

    Please refrain from posting scattergun boilerplate suggestions.
    Please post specific instructions that will resolve the problem. If you don't know why the problem occurs and how to remedy the problem, then don't bother.
    Realize that the problem did not occur with the previous version of Adobe Flash Player, but began after it was updated to 15.0.0.223. So it is is apparently specific to that version, and it may reflect a flaw in Adobe Flash Player. There's no way to actually report it to Adobe. Posting a report in their "user forum" just produces replies like the one that you have posted in reply to my OP, so what is the use?
    Evidently you presume that Firefox does not have a bug, that something else doesn't work and you may be right. However, if Firefox does have a bug, then nothing that you have posted will correct it, and experimenting according to your boilerplate will be nothing but a waste of time and effort.
    Again, the problem is not that Adobe Flash Player 15.0.0.223 does not run, but that it does not run when I attempt to view most of the videos on MSN. It does display videos from YouTube and other websites with an occasional specific exception. If the failure occured on more websites, and with all MSN videos, then maybe your suggestions for investigating it would have more merit.
    For what it is worth: the problem occurs in Firefox Safe Mode and without Firefox Safe Mode. Disabling or enabling any extensions or other plug-ins has no effect.
    I established that while investigating why Firefox 33.1 started producing crash reports every time that it initially displayed the New Tab page when I visited MSN (Firefox 32 did not do that). I also checked whether the actions that I took to troubleshoot that behavior affected Adobe Flash Player on MSN. They didn't.
    Apparently the crash reports occured because Firefox could not find or could not load the "thumbnail" images for website pages that I had previously seen (they are often deleted by ''CCleaner''). The crash reports stopped after I made a couple of changes to the configuration for the ''SandboxIE'' sandbox in which I run Firefox.
    Frankly, Firefox "Safe Mode" is something I don't need, because I run Firefox in a ''SandboxIE'' sandbox, which is a much more comprehensive security measure than anything implemented by any specific application. At the moment I don't recall whether Firefox Safe Mode is enabled, although I probaby re-enabled it after disabling it during the crash-report investigation. But it didn't make any difference with regard to Adobe Flash Player in that context, so there's no reason to repeat it.

  • I need to uninstall Adobe Flash Player Installer/Uninstaller 14.0 r0

    I need to uninstall Adobe® Flash® Player Installer/Uninstaller 14.0 r0 but have looked everywhere for how to do this & can not find out how to do this can someone please help? I am using A Sony Vaio, Windows Vista Home Premium 32 bit, I use Chrome Version 36.0.1985.143 m.
    I want to get it off of my system because ever since I installed it I have had problems with Chrome loading it does not want to load then if I restart my comptuter & I click on chrome  5 windows open up at one time a white box appears saying "Your profile can not be used because it is from a newer browser version of google chrome. Some features may be available. Please specify a different profile directory  or use a different version of chrome" then if you click ok it shuts all the windows down. I have figured a way to get one window to stay open so I can use chrome, now I do have other browser I can use but I do not like them  at all & do not have a flash player since mine is built in with Chrome. So on to the other problem that began as soon as I downloaded this & I understand it may not be this but I still want to get it off of my computer. I also have been having trouble with my flash player error messages: saying it has stopped working constantly, it says upgrade flash text, a plug in shock wave flash isn't responding then in (stop plug in) it wants you to hit.  I have run 3 different Mallware programs through my computer just in case that was one question that was going to be ask. No other programs jave been downloaded wither.
    I am not very good with computers so I have to come to places like this for help & I really have to have help explaining what to do because  do not know much about computers other then getting on them & surfing the web & some basic things. When chromes message said specify a different profile directory that went right over m head. So that should give you an idea where I am coming from. I want to thank you in advance & hope I have made sense in what I have written I tried to give all the information that I could.

    Your screenshot of task manager clarifies things.
    When I replied, I had been looking at the screenshot of the desktop from the original poster, which shows the uninstaller executable and it's properties.  That executable doesn't install anything -- it can just be dragged to the trash; however, that didn't completely align with the behaviors either of you were describing, and we've been trying to figure out what you were talking about.  It wasn't making a lot of sense to me, and it's not a question that I've seen come up before, at least not articulated this way.
    FlashUtil32_XX_XX_XX_XX.exe is the sandbox broker for Internet Explorer.  You can read more about the sandbox work here: Flash Player Security with Windows 8 and Internet Explorer 10
    The description listed in Task Manager is a bug, and the source of the confusion.  We've been doing a lot of work modernizing our build systems, and this is fallout from that work. This is something I'd like to see cleaned up, but it's pretty low on the list of priorities.
    The broker service is invoked when Internet Explorer is running in Protected Mode.  On my Windows 7 machine running IE 10, running Flash content in Internet Explorer with Protected Mode enabled causes the broker service to be invoked (this is probably true for previous versions as well, but I didn't test them).  If I disable Protected Mode and restart Internet Explorer, the broker is not invoked, which is expected.
    To disable Protected Mode, launch Internet Explorer and choose security.  Uncheck Enable Protected Mode.  Internet Explorer will restart, and you should be able to verify that the broker is no longer invoked when loading content with Flash Player.
    I've included a screenshot showing the expected processes in both scenarios below.  As the Flash Player ActiveX control is loaded into an Internet Explorer process, you'll see the child explorer.exe process listed, which hosts the Flash ActiveX control in the process list.
    Sandboxing the Flash Player plug-in is an important security mitigation intended to increase the cost of successfully developing and deploying malware.  While it's not a panacea, it significantly raises the bar for attackers.  As I'm sure you've read in the news and trade literature, the threat landscape has evolved significantly over the last few years, and modern security threats and their mitigations are a necessary reality.  New mitigations typically come with some additional processing overhead.  The overhead varies based on the architectural choices made by the particular browser vendors, but the overhead in IE is pretty reasonable.
    We haven't published a blog post specific to IE, but if you're interested in the implementation details, the sandbox architecture is similar to what we did with Protected Mode for Firefox on Windows.  The Flash Player process that handles untrusted content runs at Low Integrity, which restricts access to critical system resources in the event that you encounter malware designed to take control of the Flash Player process.  Access to system resources is negotiated through a Medium Integrity broker process.  Without Protected Mode, the Flash Player process handling untrusted content runs at Medium Integrity, making it easier for malware to escalate privileges from a hijacked process.  Depending on the functionality in play, a lot of message-passing can take place between IE, the broker and Flash Player.  We've effectively doubled the number of messages that get passed, plus put a bunch of validation checks in, and all of that consumes CPU.  It also makes your web browsing activity more secure.
    Some desktop applications (Yahoo Messenger, for example) also use the ActiveX version of Flash Player installed on your machine.  This could explain why you see Flash Player and the broker invoked unexpectedly.  We're also aware of an issue on Vista where the broker doesn't always exit as expected.  In that instance (and on WinXP), I'd highly recommend that people use Google Chrome for web browsing, as Google has extended some security mitigations that would only be available to Internet Explorer users running in newer versions of Windows, and it doesn't suffer from this specific issue with the broker.

  • Adobe flash player 11.8.800.94 crashes quite often, is there a solution?

    The adobe flash player has always crashed for me on occasion, I attributed this simply to be a necessary evil.
    However I recently upgraded to the new 11.8.800.94 and have noticed quite a few new quirks that are becoming quite irritating as time goes on and I was wondering if anyone has experienced these as well or know of any potential fixes.
    I frequently have youtube videos open on one of my monitors and on the other a webcam chatting service, omegle and the like.
    Here is where the issues begin, I will occasionally get a very noticable audio feedback in my headset. It does not happen every time I switch to speaking with someone else but it is often enough that I find it quite irritating.
    The second issue I have is far more irritating however, what used to be a crash maybe once a day has become 20+ times a day.
    I use Firefox and currently have ver. 22.0 of that browser, now I have not tested it on chrome or internet explorer because neither of those have the ad block capacity that I enjoy and I would prefer not to use another browser.
    Has anyone else been experiencing similar problems?

    I also have this sudden problem with Flash 11.8 that is crashes sometimes every some minutes on flash cam chat sites.
    You should go to about:crashes in your browser and click the latest crashes and look, if you come to this kind of bug:
    https://crash-stats.mozilla.com/report/index/7ac3f843-9dd4-40c2-a861-4296c2130707
    http://bugzilla.mozilla.org/show_bug.cgi?id=888616
    It's a top crasher for flash in FF22.
    Right now while writing this, I have such flash chat crash.
    Going back to Flash 11.7 from the archives helped me.
    But I did this mistake to update again hoping for a fix.

  • Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

    Hello,
    I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
    Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 .  Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
    Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
    Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
    Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
    Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
    Who can help to me?
    Any ideas?
    Thanks for your help in advance!

    Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
    And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
    In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
    All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
    I need help! Please!

  • How to permanently disable this message: "Press Esc to exit full screen." (by Adobe Flash Player) in Mac's Safari Browser?

    Hello everyone,
    I have been searching for sometime (without any success) for a solution to permanently remove this annoying message: "Press Esc to exit full screen."
    Whenever I go to full screen mode, watching any video on YouTube, BBC, CNN (or many other websites which use Adobe Flash Player for streaming video) I have to bare seeing this message for several seconds until it fades away. Seeing this message once or twice would have been okay, but as we all watch many videos on a daily basis on internet, after weeks, months and now years seeing this message over and over again many times every day, it becomes very annoying, and I find myself rewinding many videos to their beginning after this message fades away to be able to watch it from the beginning without anything obstructing it!
    Does anyone know how to "permanently" disable this message from appearing?
    I am using the latest version of Safari 6.0 on the latest version of OS X (Mountain Lion 10.8.1), and have the latest version of Adobe Flash Player (Plug-in version 11.4.402.265) installed on my new MacBook Pro 15" with Retina Display.
    Thanks,
    Ally
    Thursday, September 13th, 2012

    Thanks Carolyn,
    I am attaching a screenshot here for you to see that this setting was already set to what you suggested. I didn't need to change it as it was like this even before I post this message.
    So the problem still presists and unfortunately your suggestion is not a solution to this probelm.
    Last night I did more reseach and found a discussion in Adobe website, it seems a lot of other people have the same issue, and even started a discussion in Adobe website about it. But unfortunately Adobe refuses to address it and enable the end user at least to have an option to turn this message off from displaying permanently on his/her computer.
    I am writing down the url links for the two posts regarding this issue on Adobe's website:
    Link #1: http://forums.adobe.com/thread/921270
    Link #2: https://bugbase.adobe.com/index.cfm?event=bug&id=3058752
    Hopefully more people will get involved and ultimately we will either get Adobe's attention, or someone will find a "hack" and post it here for all of us. I have found some suggested "hacks" for Windows environment (you can simply google it, I am sure you will find them too). But so far I haven't seen anything for Mac's Safari browser.
    Cheers,
    Ally
    Thursday, September 13th, 2012

  • Adobe Flash Player: How many times do I need to Upgrade in a  week!!!!!!

    For the past week, I have had to upgrade Adobe flash player 3 times.
    This is making me mad! Either I upgrade or I can't view videos.
    Why the ##@ does Adobe FORCE ALL USERS TO UPGRADE for minor bug fixes.
    Three times in a week is excessive! The Adobe website is slow and I do not have all day waiting for the servers. Yes, I use vista and a broadband connecion! All this just makes me mad!

    This is thanks to the free Adobe Flash Player, which is the most common tool available for playing Flash content in web browsers. This is under constant review and development with updates available online (almost weekly at times, it seems). In other portable electronic devices a slimmed down version known as Flash Lite is used to display the content.
    Regards,
    Nintendo Ds Lite Discussions
    http://www.dslitenintendo.org

  • Google Voice Widget Not Working in Safari 5.1 which is Adobe flash wmode transparent based

    Google Voice Widget Not Working in Safari 5.1 which is Adobe flash with wmode transparent set. For that matter all flash text fields in Safari 5.1 are not working accross the web when wmode is set to transparent. This is a Safari bug! Other browsers work fine.
    Well after much research Adobe flash text field with wmode transparent set is not working in Safari 5.1 when any flash object has the wmode set to "transparent", or "opaque". The problem is many site must layer flash objects with html so the wmode transparent must be used.
    Affecting sites like BEST BUY, WALMART, CVS, STAPLES, Chechout their flash based weekly ads and find one that you need to update the quantity in the flash pop-up and the text field with keyboard strokes will not work. Flash text fields were all working fine until several month ago when Safari rolled out 5.1 working for Google Voice Flash based widget which uses the wmode transparent. HELP!
    John Hooper
    Techno Online Problem Solver
    http://www.johnrhooper.com

    All 3 examples seem to render just fine in IE and FF.
    See comparison photo:
    http://www.cidigitalmedia.com/web_devel/background.jpg
    If not working for you, try clearing your cache to remove any old, non working versions.
    Test on some other machine besides yours.
    Code looks fine and seems to work.
    Best wishes,
    Adninjastrator

Maybe you are looking for

  • HP Photosmart Premium MFC C309 - Does not Work with Mac 10.6

    I purchased a C309a to print to CD-R media. Got a great price at Costco and I stocked up on a bunch of ink. Unpacked, installed the ink, hooked her up and......not compatible with 10.6. Ugh. 2 hours on 2 separate tech support calls revealed that CD p

  • Replenishment Control / Follow-on Document

    Hi How can I associate a kind of purchase requisition to be the follow-on document in Replenishment Control? It works fine whith the standard but I need to use the new one I've created. Thanks, Patrício

  • How to control the main thread?

    public static void main(String args[]) { Thread t = Thread.currentThread(); System.out.println("Current thread: " + t); In the above code, i want to know more about currentThread() method... if i execute, i get an error message,can anyone help me in

  • Aperture shot is recorded at different values in output file

    Dear Lens users, Please explain why the aperture values which I used in my images for my sets that I used to profile my lenses, are showing up in the output data, in the .LCP file, as having different values. For instance, at f2.8 which I used for se

  • How long will an SSD last if I fill it up and erase it over and over?

    Hello, I have a 120gb SSD that I am using to capture HDMI uncompressed footage with my blackmagic intensity card. Each recording is about 15 minutes, which takes up about 110 gbs. I record about 10 times a week, so about 10 times a week, I am filling