Adobe Form not getting displayed on the portal
Hi,
From the MSS portal when I run the process, the associated adobe form(using HCM) doesn't get displayed on the portal. Initially the problem was with higher version of acrobat reader but now it is solved. Now I am not getting any error or warning but adobe form still not getting displayed.
Please help.
Later
Similar Messages
-
Work item not getting displayed in the portal
Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
<ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
<Actions>
<Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
<Properties>
<Property name="WebDynproApplication" value="ApproveFormApp"/>
<Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
<Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
<Property name="openInNewWindow" value="yes"/>
<Property name="display_order_priority" value="5"/>
</Properties>
<Descriptions default=""/>
</Action>
</Actions>
</ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION ApproveFormApp
PACKAGE sap.com/pa~asr~formstep -
Adobe Form NOT getting displayed in WebDynpro Modal Window (Pop Up)
Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
SenthilHi,
It seems to be available only for ABAP version. I cant find it in the java version.. check this..
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/656442a1c4de54e10000000a155106/frameset.htm">Help SAP Link for Java Reference</a>
And even in ABAP , the pre-requisite seems to be installation of ACF,
The exact words
<i>
Adobe Reader (>= 7.0) and, if you are creating interactive forms, also the ActiveX Control Framework (ACF) installed on your computer. Also see SAP note 834573.</i> -
Adobe Form not getting displayed in WebDynpro Modal Window
Hi,
I am trying to display the table data in a Interactive Form. I have used TABLE UI element in Interactive Form. When the user clicks on a EXPORT button this form is displayed in a pop up window (Modal Window). This form is not getting displayed for most of the users. In some PC's it is getting displayed, strange is all their browser versions and OS versions are same.
Portal Version: NW04s SP8
NWDS Version : NW04s SP8
Adobe Live Designer: 7.1
Acrobat Reader: 7.0.8
I tried changing the display type (property of Interactive Form Element) to NATIVE, it is not working at all. If i change it to "activeX", then it works in some PC's.No logs are found in the server as well as in the client PC as well.
Please let me know if you have come across this problem, looking forward to your solution.
Thanks
SenthilHi,
even though this is quite an old post, it still could be worth for someone to have a look at Note 1342716.
Michal -
ADOBE Interactive Form not getting displayed in Browse
Hi,
Currently I am working on EhP4 project on ECC 6.0 environment. For HCM, We have interactive ADOBE forms for MSS. While testing we found that all buttons are displayed in a browser (we are are window 7 IE 8 ) but interactive form is not getting displayed in the browser (Fill out Form as part of MSS). It only displays a line
Checked ADS configuration as per oss note and works ok. Did HTTPWATCH - browser is getting (GET) the Adobe forms with values but not displaying it. If I copy URL from HTTPWATCH GET line in a separate browser window it displays the form.
Thanks in advance your help.
Regards
Jitendra PongurlekarHey Chris (and others),
We were having this same problem, and this Note fixed the issue (thanks!). However, we are still experiencing another issue with HCM Processes and Forms under EhP4. Before this Note, it took about ten minutes before "single line display" would show up. Now after the Note, we get the full form, but it still takes ten solid minutes of waiting before it appears in the window. We're pretty sure it's not a Portal issue, nor an ADS issue, but something with the web dynpros on the ABAP side. However, we have not yet been able to resolve it. Anyone else run into this performance problem with HCMP&F after upgrading to EhP4? We don't have the problem with EhP3.
Best regards,
Matt -
Total is not getting displayed in the ALV output.
Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
IT_eventS TYPE slis_t_event,
fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
belnr TYPE dberchz-belnr,
belzart TYPE dberchz-belzart,
net TYPE dberchz-nettobtr,
END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = 'YZ_PLR'
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* IT_EXCLUDING =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = layout
it_fieldcat = fcat[]
i_tabname = 'LT_TAB'
it_events = IT_EVENTS[]
* IT_SORT =
* I_TEXT = ' '
tables
t_outtab = lt_tab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* MAXIMUM_OF_APPENDS_REACHED = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
GauravHi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
BELNR LIKE BSEG-BELNR,
GJAHR LIKE BSEG-GJAHR,
WRBTR LIKE BSEG-WRBTR,
WAERS LIKE BKPF-WAERS,
END OF LT_TAB.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV,
IT_EVENTS TYPE SLIS_T_EVENT,
FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
REC_FCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS = 1.
FCAT-FIELDNAME = 'BELNR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 2.
FCAT-FIELDNAME = 'GJAHR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS = 3.
FCAT-FIELDNAME = 'WRBTR'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-CFIELDNAME = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME = 'BSEG'.
FCAT-DO_SUM = 'X'.
APPEND FCAT.
FCAT-COL_POS = 4.
FCAT-FIELDNAME = 'WAERS'.
FCAT-TABNAME = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME = 'BKPF'.
FCAT-DO_SUM = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
WHERE BUKRS = 'MAAB'
AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT[]
I_TABNAME = 'LT_TAB'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max -
Data is not getting displayed in the report from an Infoset.
Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.RaoHi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Links not getting displayed in the contextual panel
Hi,
I have created a contextual panel inside a transparent container. And created a method in the same view supply_values of type supply function to supply the values to the panel.Inside the method I have coded like:
DATA TAB TYPE WD_THIS->ELEMENTS_N_VIEW_SWITCH.
DATA LINE TYPE WD_THIS->ELEMENT_N_VIEW_SWITCH.
LINE-TEXT = 'User Manual'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
LINE-TEXT = 'Logout'. "#EC NOTEXT
LINE-ENABLED = ABAP_TRUE.
APPEND LINE TO TAB.
NODE->BIND_TABLE( TAB ).
Also in the context of the view I have created a node and supplied the method 'supply_values' in the supply function.Under the node I have 2 attributes named text and enabled. Text is of string type and enabled is of boolean type. In the properties of the contextual panel I have bound the visible property with the enabled attribute.
Now when I am running this application , links are not getting displayed in the contextual panel. Though when I debug TAB contains the values. Please suggest if I have missed out something or I need to look into the properties of the contextual panel. Any pointers will be really helpful.
Regards,
AshutoshHi,
Can you elaborate ' ItemEnable property of ViewSwitch'.
I have already bound the enable property of the panel with a context attribute of type wdy_boolean but it is still not working.
Regards,
Ashutosh -
Header not getting displayed in the next page in the second table
Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin HadaHi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL. -
Whenever a record is Edited the rows are not getting displayed in the repor
Hi all,
When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
Please Any body faced this situation...
Help me to identify what error i am doing........
thanks in advance
kavitha LHi KChamarti,
I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
My item renderer is:
<mx:DataGridColumn headerText="Type">
<mx:itemRenderer>
<mx:Component>
<mx:HBox verticalGap="2">
<mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
<mx:Label text="{data.type}"/>
</mx:HBox>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
Am i mentioning the source of the image in the right way? -
SAP Fields not getting displayed on the BDT screen
Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
ShivaHi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
-
Portal Forms are not getting displayed in the new oracle environment.
Hi All,
The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
Regards,
TomHi ,
Based on the requirement , check whether the customer contact has been done carried out for the invoice , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection . -
P Tax is not getting displayed in the payslip
Hi All,
The P Tax is not getting displayed in payslip. I have checked the customization again but no use. In PA30 (IT0588) i have 'checked' the box for P Tax eligibility and have also assigned /3P3 in the form IN01 in window 2 (for deductions).
Please help.
warm Regards,
Shruti B.Hi,
Thank you All.
Regards,
Shruti B. -
Terms and conditions not getting displayed on the last page
Hi All,
I have to display a smartform, on the front side of the page i have to display material details and on the back side of the page i have to display terms and conditions. I' am unable to print the material details and terms and conditions in duplex mode, but on the last page only material details are getting displayed, terms and conditions are not getting displayed.
Can you please help me how to make the terms and conditions get printed on the back side of the last page.
Thanks,I'm a bit confused by the statement "I' am unable to print the material details and terms and conditions in duplex mode".
I suppose you meant to say "I am able to print the material details and terms and conditions in duplex mode", correct?
If the problem is that on the last form page, the T&C is not getting printed on the back of the form, you could force the T&C page by using a flow logic command as the very last element of the main window, which gets processed when all the data is already output. For the command, use the 'Go to New Page' and specify the page name for the Terms & Conditions.
In case this causes an issue that the last page is printed twice (since the T&C page is likely defined with the next page being NEXT_PAGE), then copy the already existing T&C page, call it LASTPAGE and leave the Next Page attribute empty.
Maybe you are looking for
-
How to change page template for a single page?
I create a new document based on the Pages "Reports > Business Report". Now the first page is formatted as a "Cover" page with a larger top margin. Via "Format > Advanced > Manage Pages..." I see there are what I assume are the "Page Templates": - Co
-
Dear Experts, For transformations between EDI and basic IDOC types, are there any off-the shelf (ready to use) options? If yes what are they? If not, what is the easiest way of mapping in between these structures? Our setup involves Seeburger's AS2
-
What does this key combo mean, what's it doing?
mark an in and mark an out - anywhere in the timeline of an open sequence, type the following keyboard combo: Control, O or Control, I Whats up with the red line that now extends between marks in the timeline and canvas?? Is it setting me up to creat
-
Translate a changed field description in Web Dynpro
Dear all, i have changed a the field description "Accounting Number" into "Personnel Number" in a Web Dynpro. (via SE80 -> Package GRAC_ACCESS_REQUEST -> Web Dynpro Application GRAC_OIF_REQUEST_SUBMISSION -> Tab "User details") If I test to dipslay t
-
Windows shuts down my itunes evrytime I try to open it because of an error. I have unistalled and re-installed several times with the same results. HELP???