Adobe Media Encoder Export like source size

Hey,
i´m trying to set up a custom export setting based upon HD BlueRay Mpeg setting.
My source is a custom size (1400 x 1050 px), but i am not able to change to "size as source".
Any Ideas how to change that?
THX
MArco

Marco,
You can use AME to encode a 1400x1050 M2V file.
You need to use the generic MPEG2 format (not Blu-ray or DVD) and change the Level to High. (High 1440 will also work, but it is designed for specific applications.) You will also need to set the Profile to Main or High.
The most important factor is what type of MPEG2 streams your playback device will support. That will be important for setting the Profile and Level values, which constrain the bitrate and therefore the frame size/frame rate of the MPEG2 stream. (This is what Mylenium was referring to.)
Read this for more technical detail about different Profiles and Levels:
http://en.wikipedia.org/wiki/H.262/MPEG-2_Part_2#Video_profiles_and_levels
You cannot transfer encoding presets between After Effects and AME. However, remember than you can encode an After Effects comp directly from AME without rendering an intermediate comp first. Either drag and drop the comp from AE's Project panel into the AME queue, or simply import the AE project into AME, and choose the comp you wish to render. In the next version of After Effects, this process will be much easier with the introduction of a new Add To Adobe Media Encoder command from within After Effects.
http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html
If you want to contact in-person support for AME, visit the following page and choose After Effects as the product (there is no AME option because AME is not sold separately).
http://helpx.adobe.com/contact.html

Similar Messages

  • Why won't Adobe Media Encoder export WMV?

    I am using Adobe CS6 Design Standard with Adobe Media Encoder, and I'm trying to export video files to WMV using the Encoder.  I'm am running Windows 8 and for some reason the option to export to WMV does not come up for me.  I only get four options of formats, while online it says I should have many more.  This is a full version of CS6 that I bought and paid for, and every program is up to date.

    Can I just buy the converter plugins or do I have to buy premiere pro or after effects?
    On Jan 9, 2014, at 1:07 PM, Todd_Kopriva <[email protected]> wrote
    Re: why won't Adobe Media Encoder export WMV?
    created by Todd_Kopriva in Adobe Media Encoder (AME) - View the full discussion
    The formats and codecs available for export through Adobe Media Encoder differ depending on what Adobe applications you have installed. The vast majority depend on the video applications, After Effects or Premiere Pro, being installed.
    http://blogs.adobe.com/kevinmonahan/2011/09/13/installed-codecs-in-ame /
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5995108#5995108
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5995108#5995108
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5995108#5995108. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Adobe Media Encoder (AME) at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Adobe Media Encoder exports different video than what appears in CS4 timeline

    I'm using Premiere CS4 to edit a short skiing video.  All shots were taken using a GoPro @ 60fps, 720p.  All of the clips were converted into slow motion by using "Interpret Footage" and setting the frame rate to 24.  I used the sequence preset "AVCHD 720p 24", and editing seemed to work fine.  The video played smoothly and correctly.  However, after exporting in Adobe media encoder, the video was far different than what I previewed in the timeline.  It seems as though each clip shows up at the correct time, but it disregarded any trimming I did to the clips and each one is played from the very beginning.  Also, each clip plays extremely slowly, and there is signifigant ghosting (frame blending issue?).  I can also see that the preview window that shows up while I set the export settings displays the incorrect video as well.  However, if i change it from "source" to "output", it displays it correctly.  I tried exporting using H.264 720 24p and the youtube HD widescreen preset, both of which failed.  I am somewhat new to HD video, but I cannot seem to come up with any reason why my video will not export correctly.  Any thoughts?
    PC Specs:
    Intel Q6700 quad core @ 2.66gh
    4gb ddr2 ram
    1tb 7200rmp hard drive
    GeForce gt240 graphics card w/ 1gb dedicated video mem
    windows 7 ultimate 64
    All updates to premiere installed

    I don't think AVCHD is the correct preset... but I use CS5 so not 100% sure
    Flip or GoPro video http://forums.adobe.com/thread/437535?tstart=0
    - And http://forums.adobe.com/thread/668369?tstart=0
    - And http://blogs.adobe.com/VideoRoad/2009/12/using_a_flip_minohd_camera_wit.html
    - Says to use the XDCAM EX 720p 30p (or 60p?) setting for Flip (maybe GoPro?)

  • Adobe Media Encoder Export Settings Window Dimensions Problem

    Any help on this would be appreciated: I'm on a macbook pro, osx 10.6, using CS4 Web Premium. I used to have an external monitor hooked up which had much higher resolution, so when using Adobe Media Encoder I'd click the Settings button on a video to get the Export Settings window, then stretched the Export Settings window to be the size of my external monitor. Now, I'm just using my laptop, and the export settings window does not have the resize buttons at top left to adjust it back to the size of my laptop, and the bottom third of the export settings window is getting cut off so I can't see the cancel/ok buttons etc.
    I've tried re-installing media encoder (via reinstalling flash using the CDs) to try to 'reset' the window sizes, didn't fix the problem.
    If anyone knows of any other preferences or something I could delete to fix this, I'd be one thankful dude.

    Yes, I was getting the same response. It means Adobe is not using OS native windows (shame on them!).I just tried something with CS4 that worked, though. Try this:
    Quit Media Encoder
    Go to UserHomeDirectory > Library > Preferences > Adobe > Adobe Media Encoder > 4.0 and delete the files called 'AMEPrefs.xml' and 'AppPrefs.xml'.
    Then restart Media Encoder. For me, this reset the window size and placement. I tried moving the Export Settings window down so half of it was off the bottom of the screen. Once I deleted these files and restarted, the window was smaller and repositioned.
    If that doesn't work, try downloading the demo of this product:
    http://irradiatedsoftware.com/sizeup/
    It says that Adobe programs are "trouble" programs, that they probably won't resize, but they should at least move. If nothing else, maybe you can move the window to a negative y value (up) so that the resize handle is visible, then move it back down so the header bar is visible again...

  • Adobe media encoder export error  "writer not found"

    When trying to export to wmv using adobe media encoder I get an export error of "writer not found". I did a search and found others having the same issue with no fix as far as I can see. Just wondering if anyone has any more iformation on this. I'm using Vista Ultimate and Premiere CS3.
    Thanks

    I registered the WMEncoderHelper.exe file with regserv, but I still get
    the "writer not found error". I wish I knew what codec it is trying to find and use.

  • Adobe media encoder - export h.264 59.94fps 4096x2160 .mp4 file

    I have been trying to export footage from the following camera, the Sony PXW-Z100 and trying to export a h.264 59.94fps 4096x2160 .mp4/.mov file.
    I found this article and presets from Video Road, but am unable to get this specific combination working in anything but compressor.

    A better place to ask is Adobe Media Encoder (AME)
    This forum is about the Cloud as a delivery process, not about using individual programs
    If you start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Adobe media encoder exports look pixelated and has artifacts.

    Hello all,
    For the past week we've been having terriable looking videos after compressing them with premiere pro 2014 or AME CC 2014. I though it might be a key framing issue at first. When we look at the final product we have areas where pixilation and artifacting show. We film on canon c500 so we edit with mxc files. We export out with the Youtube settings and adjust them manually. We have 2 areas we export for. 1280x720 at 4mbps and 1920x1080 at 10 to 15mps. We have never had this bad of looking video before we switched to cc2014. I work on Mac OS X 10.9.4 with a 6 core inter Xeon 32GB memory and we have the Kona LHi AJA graphics card.
    Here is an example of what we are getting.
    test2.mp4 - Box
    If you look at around 3 seconds the whole screen will pixalate and you'll see artifacts for about 10 frames. It's really bad in my opinion and we can't display this. I called Adobe for support and after 2 hours they only trashed my preferences and took my complaint. That's all the help I've gotten so far.
    Any help will be very appreciated.
    thanks for you're time.
    Lee

    I don't think AVCHD is the correct preset... but I use CS5 so not 100% sure
    Flip or GoPro video http://forums.adobe.com/thread/437535?tstart=0
    - And http://forums.adobe.com/thread/668369?tstart=0
    - And http://blogs.adobe.com/VideoRoad/2009/12/using_a_flip_minohd_camera_wit.html
    - Says to use the XDCAM EX 720p 30p (or 60p?) setting for Flip (maybe GoPro?)

  • Adobe Media Encoder Exporter.cpp 396 Error

    Hi,
    I'm receiving this error when I try to convert a .mpg to a .flv. I have Adobe Web Premium CS5.5 running on windows 7 x64. I have also encounted this error on Windows 7 x32.
    I can use CS4 to convert the video but I would love to use CS5.5 as I am removing CS4 soon.
    I tried to search around for this error but it seems no one else has come across it yet.
    Much appreciated if I could get this working today.

    Dito, I'm having the same problem.
    Any solution yet?

  • Adobe Media Encoder: Audio won't export with video

    I am trying to convert an AVCHD video for viewing on my iPad 3. I use Adobe Media Encoder and select the iPad 2 settings (1920x1080) and it exports the video perfect, but no audio. I have "Export Audio" checked off. I tried it with 5 other settings and it just wont include the audio. Any ideas?

    Seems random people are running in to this, so hopefully this solution will be found by whomever's looking.
    If you're exporting video files from Final Cut Pro as .mov, and then trying to convert said .mov to an .mp4 using Adobe Media Encoder and are losing audio even though you're multiplexing, try this...
    Make sure that you export only a 2-channel audio track from FCP.   When I export from FCP, I split my audio into various tracks by default.  Great for making master clips, but problematic if uploading to YouTube or doing further encoding in Adobe Media Encoder.   Like YouTube, if you have more than 2 tracks of audio, Media Encoder seems to get confused and ignores all audio tracks.  Combine all audio into a 2-channel stereo track and see if that solves the problem.
    Regardless of editing program, see if reducing number of audio channels from source clip solves problem.

  • Adobe Media Encoder timecode doesn't match Premiere sequence

    Hi, I'm having an issue when exporting through Adobe Media Encoder.  My source sequence is 23.976 fps; I've set the Display Format in AME to 24 fps (options are 24, 25 and 30) and the export setting to 23.976 but the time codes don't match; AME seems to be adding frames.  Over the course of a 90 minute export AME is adding about 6 seconds; the Premiere sequence is 01:33:52:13 while the AME export settings show 01:33:58:04.
    I'm exporting this in chunks so I'm concerned that when I string them all together with the audio there will be a sync problem.
    Version:  AME CS6 6.0.2.81 64bit
    Using with Premiere CS6; have entire suite installed
    Most recent update installed
    Mac OS X 10.7.3
    Creative Cloud:  No.
    Working with a mix of RED 5k, 4.5k and 4k footage; all shot 23.976
    No error messages
    Is the problem only occurring with a specific output format or encoding preset? If so, which one? - same on all outputs; exporting to prores 422 1920x1080 23.976
    Running Premiere at same time
    Mac Pro, 2 x 2.4 GHz 6-core intel xeon, 64 gb ram, solid state boot drive, red rocket, black magic, decklink hd extreme 3d+
    Are you using Mercury Playback Engine GPU Acceleration in Premiere Pro? - yes by default? no cuda / opencl
    An unrelated problem I've also been having is when I try to export the full sequence, or even half, the export will freeze around 40%.  No error message, just stops.

    How are you checking the exports?

  • Export 24 Bit Source WAV as 32 Bit Float Before Converting In Adobe Media Encoder?

    Hi,
    I'm exporting movies from After Effects as .avi and wondering what I need to do to preserve my audio as close to the source as possible. My source audio file is 24bit / 48K. I am using Adobe Media Encoder to encode the video/audio as YouTube Widescreen HD, but since After Effects doesn't offer 24bit export, should I export as 32bit float? And is this going to alter my audio in any way before it goes to Adobe Media Encoder?
    I've read about this on some different forums, but am still not clear about it..
    Thanks,
    Henry

    Hi Dave,
    Thanks for your response. The issue that I'm running into with Adobe Premiere is that I've created "odd" frame rates in After Effects to sync my animations in "time" with my music. For this particular animation, the BPM of my music is 72.5, so I've used half of that, 36.25 FPS to perfectly line up my animation in After Effects. It locks right in with the BPM. I've tested this out on YouTube, where my videos are headed, and it works perfect. The problem is that Premiere is not using the source (After Effects) frame rate and and I have to choose from a set list of frame rates. Is Premiere limited to these frame rates? If that's the case, then I guess the only other option for me is to export from After Effects as 32bit float and test to see if their is even a difference from the source WAV. Most people are not going to be monitoring with high end D/A converters anyways, so it's probably not even going to make a difference. However, I have put a lot of work into this project and I want to deliver the best possible master.

  • Audio and video timing thrown off on export to Adobe Media Encoder

    Hi.
    I have a two and a half minute video which includes a lip-synched character.  Everything is working perfectly inside Premiere Pro CS4. When I export this using F4V format, I set it to match frame rate as source then typed in 24fps for good measure.
    The audio track is way off after going through Adobe Media encoder however.
    The original video (generated in Carrara 7 Pro) was set to 24fps, but it looked like Premiere tried to import it as 29.97 fps.  I right clicked on the clip and used Interpret Footage to set it back to 24fps when first setting up this project.  (looking in my Project Panel right now, I see the flv icons are all set to 24 fps, but the blue icon representing PremiereProProject is indeed set at 29.93 fps, plus and incorrect size (720x480 px as oppsed to the 608x464 px of my actual flv files).
    Seems like it's still pulling in that faster frame rate though when it goes to encode, even though I'm setting stuff to 24fps wherever I see the option.
    Any ideas how to fix this (and how to prevent similar problems in the future)?
    Again, everything works fine within the Premiere Pro CS4 context.  It's just when I export that the video seems to play at a higher frame rate, thus begins running way ahead of the audio.
    If there's not a way to fix this (change the project settings) within this file, is there a way to copy all of my data and simply paste it into a Premiere Pro file with the right size and fps?  I've now created a custom preset with the correct info.
    Thanks

    Yeah, I'm pretty sure that was the issue.
    I bring my stuff in from a 3d program (Carrara) which exported a png sequence at 24 frames per second (in square pixels).  I didn't see an appropriate preset, so I chose a randomish DV preset, with 29.97 fps and .9 pixel aspect ratio.  i re-interpreted the footage to set back to the correct framerate (and pixels I think).  But when I exported from PremPro, it pulls in that initial Project Stting of 29.97 fps, thus all of my audio is off.
    Is there a way to re-set the Project Settings after the fact so I can correct my fps and pixel proportions?
    Or is my only choice to reimport my footage to a new project with the corect settings?
    Thanks

  • Export Quick Time using Adobe Media Encoder...

    I'm a Windows (vista) user and I rarely use the Quick Time options in the Adobe Media Encoder but nonetheless, I have in the past. I was called on today to export a Quick Time of a video for a Mac using client and every time I selected an Adobe preset under Quick Time, 'Custom' would appear where it should normally say something like 'Source to Download 256' or whatever. (Sorry I can't check now, I'm rendering a big project). So no matter what preset I picked, I'd get 'Custom' appearing as my choice. Is this normal or has something gone wrong in the innards!?
    Sorry, I have no other computer to check with Premiere Pro CS3 installed.
    Thanks

    Thanks for the input. So just to confirm, you're saying that if I choose one of the Adobe Presets under QuickTime, that that setting should STAY visible in the selection box. Yes? Just like the others. Windows Media, Adobe Flash, etc...
    Because mine immediately changes to CUSTOM after I make a QuickTime selection. Also, it DOES NOT give me a file size estimate like the others. Does this make sense?

  • Adobe Media Encoder for CS4 error Could not read from the source

    Hello,
    I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
    - Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
    - Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
    - Preset Used: NTSC DV
    - Video:
    - Audio:
    - Bitrate:
    - Encoding Time: 16:10:34
    1/21/2009 9:50:25 PM : Encoding Failed
    Could not read from the source. Please check if it has moved or been
    deleted.
    Thank you
    Art

    When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
    If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
    Do one or both of the following solutions:
    Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
    Close all Adobe applications.
    In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
    Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
    Rename the newly created shortcut to just Premiere.
    Important: The name of the shortcut must be exactly Premiere with no other characters.
    Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
    Move the Premiere shortcut that you created into the dynamiclink folder.
    Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
    Do one of the following:
    Windows XP: Choose Start > Control Panel > Add or Remove Programs.
    Windows Vista: Choose Start > Control Panel > Programs and Features.
    In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
    Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
    Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
    Re-install your Adobe software.

  • Freezes when exporting .mov files in CS4 / Adobe Media Encoder

    For the past 7 hours now I have been trying every internet remedy for the following problem, and was wondering if any of you nice people could help:
    I just came back from a ski trip, and wanted to make an edit featuring my fiends. I recorded large parts of the trip on my new iPhone, both in 720p 120fps (120.15fps, h.264 1280*720) and the normal 1080p 30fps. iPhone files are in the .mov format. I also recorded some parts on a GoPro hero hd2 camera at both 720p 60fps and 1080p 30fps. GoPro files are in the MP4 format, and i've never had a probvlem with them.
    Now all imports fine into premiere pro, and although I had a few problems with freezing while editing initially, this was quickly solved by terminating all unused (non-adobe) processes in task manager.
    So I spent a good 4 hours making a 2.5 minute edit of our day, and wanted to export it.
    So I selected the sequence, and went file>export>media, selected all of the preferences i wanted for exporting, and sent it to the Adobe media encoder.
    The media encoder loads the files for a few seconds, and then starts the encoding process. And promptly freezes. It freezes at around 10-20 seconds (depending on export preferences) after starting to encode, and never restarts. i can then pause the encode, but cancelling it crashes adobe media encoder and subsequently also crashes Premiere Pro.
    I may be mistaken here, but I have a strong suspicion that It is quicktime that is causing all this.
    So I tried the following:
    - reinstalling, downgrading, updating, etc. Quicktime
    - renaming file extensions from .mov to .mp4
    - all sorts of export preferences, from image sequences to dvd to blueray and dv. (Image sequences, interestingly, occasionally export to about half a minute into the video(also depending on preferences), then freeze)
    - crossing my fingers
    - checking for gaps in video, found none
    - updating premiere pro and media encoder
    - throwing my mouse at the wall in frustration
    - making a new project with different settings and copying in the sequence
    - disabling "Include source xmp metadata"
    - making a new user account and trying it there
    Is there anything else I can try?
    Could I copy the project itself into a different program (e.g. iMovie or Windows Movie Maker) and export from there?
    Is there an alternative to Adobe media encoder?
    Need more information?
    Thanks for the help!
    Specs:
    Premiere version: 4.2.1
    Encoder version: 4.2.0.006
    Comp specs:
    16Gb ram
    quad core i5
    256 Gb solid state (system, program files are here)
    2TB HDD (video files, scratch disk are here)
    Nvidia gtx 660 graphics
    Windows 64 bit
    1 monitor

    I bought quicktime pro today to try this, but to no avail. it just freezes up again during export.
    I tried some other fixes on that page, like renaming files to .mpg extension, which worked once during an export of a test sequence (although everything was shifted and it cut off the export at the gopro footage).
    Is there any way I can export this project to another program to export it from there perhaps?
    Thanks for the help!

Maybe you are looking for

  • Depot Excise duty

    Dear All, i have one issue regarding Depot excise duties. user has done one delvery and capture excise duties thru j1ij, after he reversed and deleted delivery without cacelling rg23d. now i want to get rg23d values reverse. guide me how to get rg23d

  • Cannot set DNS name for ORA APPS

    While installing oracle applications 11.0.2 on windows2000 advance server at the begining of the installation i m prompted with the error : ONE HOUR INSTALL REQUIRES THAT THE TCPIP DOMAIN NAME IS SET, THIS CAN BE SET ON THE DNS PAGE OF THE TCP ID PRO

  • Report to download a pgm in text format

    Hi, My requirement is to download the whole program in a text file, and all includes in a separate text file correspondingly.I have to do this job using read report and scan statements. Regards, Asha

  • HP Pavillion G7 series laptop Windows 7 Home premium 64 bit

    I have an HP  Pavillion G7 series laptop, On trying to install latest version of Skype, Skype downloads but won't install. Error message "internal error has occured"  code 1603.  My local comp engineer investigated and determined that the Sonix integ

  • How to link imported Goods REceipt (DTW) to PO

    Hi, We are importing our Goods Receipt PO through DTW because the serial numbers are not sequential. In DTW, how do I link the added Goods REceipt to the original PO? Thank you! Jane