Adobe Photoshop 3.2

Hi, I am having the same problem as other people on here about getting pictures out of the Adobe 3.2 after the sunscription ran out. Of course I can't register and unlock it because it is no longer supported. I tried this a couple of years ago and tech support would not help so gave up. This time the Adobe tech told me to go to this forum. It seems like someone at Adobe Tech line would be able to help you instead of telling you to go to this forum. Is the page I am looking at the album? I went under My Pictures and found a Adobe file and then a Digital Camera file and deleted the pictures on there some of which were on the 3.2 page. After reading other forums, I still don't understand how to get to these pictures. I have tried the Search using the picture id and it found just that pic. I know a good bit about using a computer, but there is still a lot I don't know or understand. Any help that can be given in as simple terms as possible would really help. I really want to look at the pics as they were taken in 2003, but will probably delete most of them. Right now am downloading pics from my cell phone which I think is being done by Adobe Photoshop and then putting them in My Documents. I did notice that if I double click on C Drive, then double click on Program Files, then click on Adobe, then double click on Photoshop Album Starter Edition, then double click on 3.2, then double click on Apps, all kind of files, folders or apps whatever they are are there. Some of the pics may have loaded with the software that came with an HP camera I had. I don't know it has been so long. I have been trying some of the things on the forum and not having any luck. I can get some, but not all of the pics.

Yes, that helps. I have looked in those folders and found some of them. 
However, I don't know exactly what you mean by using Windows Explorer  to find
the files. I think that is what I did. However, if you could explain I 
would know for sure.
Thanks,
Darrell
In a message dated 8/3/2011 7:39:22 P.M. Eastern Daylight Time, 
[email protected] writes:
Hi  DCrosen,
The way you phrased the problem; "can't get photos 'out'  of 3.2', reveals
a common misconception about Album and your photos. I just  thought of an
analogy that might help.
If your in the restaurant  and you look at a picture menu, that's Photoshop
Album. When you order the  food, the waiter goes back and gets your meal
from the kitchen; the kitchen is  the folder where your pictures are actually
stored.
The menu is  not a replacement for the kitchen; it's simply a
representation of the  kitchen. If the menus all burned up some day (unfortunately, as
this is  basically what happened with the Starter Edition app), your food
doesn't go  away, just the pictures of the food.
One of the benefits, yet  drawbacks, of Starter Edition is that is easily
masked where the kitchen was;  people who had gotten used to using Starter
Edition to access their photos  were unaware of the actual location of the
files, so that when the app stopped  working, many were asking the very same
question you ask, which is 'how do I  get my photos now?".
The answer is that you will have to resort  to the 'normal' routine of
dredging through the file system using Windows  Explorer to locate the files;
all we can do is guess where you may have stored  those files; they could be
in your My Pictures folder; they might even be in  an Adobe Digital Camera
folder in your My Pictures folder, if you used the  downloader to copy files
to your computer.
The files and folders  in your Program Files folder are where the program
itself is stored, not the  images which would have been downloaded by the
program; those generally go  into your My Pictures folder (but you could have
changed the default to go  anywhere).
Does any of this help explain where the files might  be?
-Mark

Similar Messages

  • Adobe Photoshop CS2

    Topic
    Photoshop CS2 and Nikon D200
    Chuck Dell - 09:20am Dec 19, 2005 Pacific
    Just purchased new Nikon D200. RAW Images will not open in Photoshop CS2. Receive Adobe Photoshop CS2 error message "Could not complete your request because of a program error." Images taken with this camera will open in Nikon Capture 4.4 and then can be transferred to CS2 But attempting to open RAW images directly with CS2 is futile.
    Images taken with Nikon D2h and Nikon D100 flow perfectly through CS2
    Only images taken with Nikon D200 will not open in CS2.
    Is this Nikon problem or an Adobe problem?
    Reply To This Discussion | Back to Topic List | Bookmark | Subscribe
    To start a NEW discussion click on the Back to Topic List link and select Add Topic.
    If you are in an archive forum please go up to the main topic list (archives are read only).
    Messages 2 messages. Displaying 1 through 2.
    First Previous Next Last Show All Messages
    Joseph liftik - 11:12am Dec 19, 05 PST (#1 of 2)
    Wait for Adobe update on ARC that will support D200.
    Post Reply | Bookmark
    Chuck Dell - 12:11pm Dec 19, 05 PST (#2 of 2)
    Excuse me, but what is ARC?
    And does anyone know when Adobe will release supporting update?
    Post Reply | Bookmark | Edit

    upon importing i had the option of selection importinf from a "PICT Resource..."
    this was the only option that allowed me to select my JPG images (digital caerma images, btw)
    when i select and clikc OK, a message that comes up that says "There are no PICT resources in this file"
    moreover, when i convert the JPG images to PICT images (via preview) i get the same message
    strange, since i've been able to copy and past my JPG files all along until now...

  • Adobe Photoshop CS2 has encountered a problem and needs to close.

    Just starting to get this error on open in CS2 after a few months of smooth sailing on a new system (below). CS2 now cannot open. It started occasionally and increased. Tried reinstalling. Tried deleting the PS config files and same error. Any suggestions?
    Here's a sysinfo paste of my system.
    Nick
    XP pro SP2
    Small Bus. Server network node
    Profile- Username.DOMAIN
    PHOTOSHOP
    Photoshop CS2 (upgrade from ver. 6)
    C:\Program Files\Adobe\Adobe Photoshop CS2\9.0
    MB - ASUS P5K-E
    Disk C: 819 GB Available, 931 GB Total, 819 GB Free
    Disk D: 96 GB Available, 232 GB Total, 96 GB Free
    Intel ICH8R/ICH9R SATA RAID Controller
    Physical Memory 2048 MB Total, 1149 MB Free
    Virtual Memory 4740 MB Total, 3900 MB Free
    PageFile Name \??\C:\pagefile.sys
    PageFile Size 800 MB
    PageFile Name \??\D:\pagefile.sys
    PageFile Size 2047 MB
    One Physical Processor / 2 Cores / 2 Logical Processors / 64 bits
    Intel Core2 Duo CPU E8400 @ 3.00GHz
    Video1: ATI Radeon HD 3800 Series
    Video2: ATI Radeon HD 2400 PRO
    Memory Capacity 2048 MBytes
    Slot 1
    Corsair
    CM2X1024-8500C5D
    1024 MBytes
    DDR2-800 (400 MHz) running 1066
    64 bits
    Voltage SSTL 1.8V
    Slot 3
    Corsair
    CM2X1024-8500C5D
    1024 MBytes
    DDR2-800 (400 MHz) running 1066
    64 bits
    Voltage SSTL 1.8V

    Just ran memtest and received no errors. This more or less clears the hardware. I have no idea how to proceed. Does adobe offer any direct support for this sort of problem?

  • Error 400 when trying to sign-in to Adobe Photoshop 9 [was:Error]

    Getting an Error 400 when trying to sign-in to Adobe Photoshop 9.  What is the problem?

    http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Error Installing Adobe Photoshop CS2

    I tried to install Adobe Photoshop CS2 in section http://www.adobe.com/downloads/cs2_downloads/index.html
    on a Mac ProBook 2.4 Intel Core i5 processor, 4 GB Memory, Intel HD Graphics 3000 384 MB, install halfway then I see the following information: The installation failed. The installer encountered an error That caused an the installation to fail. Contact the software manufacturer for assistance. can you help me with this problem?

    Thanks for replying so fast
    Gutted I was happy with CS2. Any idea which are the earliest versions of Photoshop and Indesign I can install on the new Mac?

  • Error in VBA reference for Adobe Photoshop CS4 Object Library

    Hello,
    I'm using Windows 7 Pro, MS Office 2010 Pro and Creative Suite CS4 (with all updates).
    I will automate Photoshop via Visual Basic for Applications in MS Access.
    Befor using there the Adobe Photoshop CS4 Object Library I must reference it in VBA.
    But when I will du this, I get the message "Error loading DLL".
    When I will manually reference to the WIASupport.8LI File, I get the error: "Cannot reference this file"
    Can you give a tip, how I can solve this problem?
    Regards

    I have the same problem!  I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
    Does registering unlock something?
    Help please!!

  • Adobe Photoshop CS2 in Macbook Pro

    During installation of Adobe Photoshop CS2, the installer runs and freezes in the midst. There is no way of installing Adobe Photoshop CS2 with intel processor. Full reinstallation of Mac OSX doesn't help. Running disk utility doesn't help either. Problems occurred with or without installing of Apple Security Update 2006-003(intel). Any comments?

    Edwin, thanks for the input, and I do apologize. You are right. I should be easier with which to live. There are two major problems out there right now. That is also part of the problem. We are not used to two problems in our domain.
    I own 20 Mac's in my office, and I only did these updates on my MacBook Pro 17 inch and my G5 Dual 2.3 Ghz machine that has two 30-inch Cinema Displays. I had both problems on my MacBook Pro, and the G5 had the reboot glitch. I won't update the other machines untill these problems are resolved by the OEMs.
    Of the two major hiccups out there, this link indicates Quicktime's update is the source of the inability to restart machines, fixed by deleting startup items, I believe. I had this reboot problem also.
    http://www.macworld.com/news/2006/05/24/cs2quicktime/index.php
    Accrobat's freezing the system, the question at hand, is a result of the Security Update, fixed by rolling back to a pre-Security Update state using Archive & Install re-installation of the OS. Archive & Install does not erase your files or network settings.
    Apple has released two products that fouled these systems. Bad Quality Assurance I think. I am not sure if the Security Update problem is an Apple or an Adobe software problem, i.e., Adobe may have not followed some software guidance. I am certain both companies are aware of the problem, but I am uncertain of the fix for Acrobat. We probably do need to update for security, but I can't live without Acrobat. So I will wait it out without the Security Update.

  • Can i open and edit animated GIF in Adobe Photoshop Touch?

    Can i open and edit animated GIF in Adobe Photoshop Touch?

    No, only regular static GIF images are supported. The desktop version of Photoshop does support this however.

  • PhotoshopNews: Adobe Photoshop CS3 at a glance!

    http://photoshopnews.com/2006/12/14/adobe-photoshop-cs3-at-a-glance/
    Even more content out there now on the home page of PhotoshopNews.com

    I haven't been able to download CS3 yet, but the Martin Evening pdf (thanks for the link!) has what looks like a piece of great news buried in it:
    "For example, before you first had to create an empty new document with the exact pixel dimensions before you could place an image (such as a raw file) as a Smart Object. With Photoshop CS3, you can now place a raw capture file as a Smart Object layer in a single step."
    If I understand this right, it means that the functionality of the old Dr Brown Place-a-Matic script is now available from Aperture. We can -- or this makes me hope we can -- send a RAW from Aperture to PSCS3 for editing, and then Place the same image, perhaps twice, as a Smart Object, edit away, and when we Save get the whole edited image back in Aperture without going through the Finder.
    I used to use this (from Bridge) all the time to double-expose RAW shots: adjust the sky to one exposure and the ground to another, masking to get both into the final image, all without messing with the pixels of the RAW image. I've missed it. Whoopee.

  • A need to get photos of my baby from Adobe Photoshop Album Starter Edition 3.2 but I don't have a code so I cannot access in it. Somebody can help me, please?

    Two days ago I introduced photos of my baby into my PC and automatically went into the programm Adobe Photoshop Album Starter Edition 3.2. Then they were deleted of my photo camera. Then I wanted to access to the photos in the Adobe Photoshop Album Starter Edition 3.2 but I read that since the end of Juny we need a decodification code and that now it is not availabel. So I don't have this code and I need to access to the photos. Please, somebody can help me?. Thank you.

    Thank you for your help, Gunjan, but I have already tried to contact adobe tech support and I cannot get a code still now. I just find fixed issues where there is not shown my problem and I cannot find the way to write my question about my need of a code for Adobe Photoshop Album Starter Edition 3.2. Could you or somebody tell me the way to get the code through adobe.
    Thank you
    Mona05

  • I have been using Adobe Photoshop Elements 11 for two years. I got a new printer and installed it although I did not remove my old printer from my computer. I used this program and my new printer for quite a few months, but today I deleted my old printer

    I have been using Adobe Photoshop Elements 11 for along time now. When I first used the program I had a different printer than I have now. Although I changed printers I never removed the software from my old one. Now this was never a problem until today. When I choose a printer I still had option to use the old one but always chose my new HP Envy 5530 and Adobe never had a problem printing from that new printer. However today I decided to remove my old printer from my computer and now my Adobe cannot find my new printer.  How can I make it find the HP printer?

    Try this --
    Go to the bottom of the link I gave you, and you will see
    click that link and then click the chat button to talk to an Adobe agent

  • How can I install Adobe Photoshop Elements Update 9.0.3 after I get a message that Installation has failed and the solution is not in troubleshooting or forums?

    My Photoshop Elements 9 stopped working a couple of weeks ago. When I clicked the PSE button nothing happened. I tried this several times over a few days and it still failed. I uninstalled the program and re-installed it. It worked well. Then I tried to install the Update 9.0.3. The download was almost successful. When it was about to show 100% successful for the download, an error message said the installation had failed and that I should try later. I tried this many times over a few days and the same result occurred. I tried troubleshooting and the answers to questions, but I could not find an answer. I don't know where to go to see if anybody has answered my question. How can I install Update 9.0.3?
    Colin Hansen

    Try downloading and installing the 9.0.3 updater from here:
    mac
    Adobe - Photoshop Elements : For Macintosh
    windows
    Adobe - Photoshop Elements : For Windows

  • Adobe Photoshop CS6 Very Slow On Rendering Type

    I have a notebook with specification as mentioned below :
    Lenovo Ideapad Y470P
    2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
    Windows 7 Ultimate x64
    AMD Radeon HD 7690 2GB
    8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
    750GB 5400
    I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
    Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
    The file size when blank is about 56.1 GB.
    The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
    I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
    Some configurations that i've made is :
    - Turn off the Automatically Save Recovery Information
    - Set Maximize PSD and PSB File Compatibility to Ask
    - Set the Memory Usage to 95%
    - Set the Cache Levels to 8 and Cache Tile Size to 1024K
    - Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
    - Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
    And after all of that configuration, my Photoshop still slow when Rendering Type.
    Could you give me some tips to solve my problem?
    Thanks

    300 ppi for a banner that size is categorically not normal.  Guaranteed. 
    Get specific instructions from the shop that is going to print it.
    You keep confusing ppi with dpi.  The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch.  The precise terminology is as follows:
    DPI = Dots per inch = units used to measure the resolution of a printer
    LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
    PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
    Here's a link to a discussion that may interest you:
    http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
    It includes the following chart and subsequent comments :
    "The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
    "Viewing Distance   Present Study    
    20 feet    greater than 10 LPI  
    18 feet    18.75 LPI or greater 
    16 feet    18.75 LPI or greater 
    14 feet    37.5 LPI or greater  
    12 feet    37.5 LPI or greater  
    10 feet    50 LPI or greater    
    8 feet     65 LPI or greater    
    6 feet     85 LPI or greater    
    4 feet     100 LPI or greater   
    2 feet     133 LPI or greater   
    1 foot     150 LPI or greater   
    6 inches   150 LPI or greater
    "Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
    Talk to your printer.  I suspect they will want a file at under 75 ppi, or even much less.  Follow the printer's advice/request.

  • How to install TWAIN plug-in for Adobe Photoshop CS5

    Adobe Photoshop CS4 listed my Epson Perfection V500 scanner as a selection under “File-Import”. When I installed Adobe Photoshop CS5, I noticed that scanner selection is not there. I contacted Epson technical support and they said Adobe Photoshop CS5 does not automatically install the TWAIN plug-in that it needs to recognize the scanner and that I need to contact Adobe technical support to find out how to add it.
    How do I install the TWAIN plug-in for Adobe Photoshop CS5 so it will recognize my Epson Perfection V500 scanner as a selection under “File-Import”?
    Thanks to anyone who can help me out.

    Thanks for your response.
    I downloaded the "Photoshop CS5 Optional Plugins" file (PSCS5OptionalPlugins_Win_en_US.zip). I unzipped it and read the "ReadMeCS5_OptionalPlugin.pdf" file. In that file, the only section that discusses TWAIN is entitled "TWAIN (Mac only)". There is no section for how to install TWAIN for Windows.
    How do I install the TWAIN plug-in for Windows?
    On a side note: Before I posted the question to the form, I changed my Adobe account email from [email protected] to [email protected] I then logged in as [email protected] and posted the question. The notification email for your posting a response to my questions was sent to my old email address (not tye new one). My Abobe account and my forum profile both show my new email address. Where is the settings that controls the email notification for the posting responses?
    Wikipedia
    Wictionary
    Chambers (UK)
    Google images
    Google define
    The Free Dictionary
    Join example
    WordNet
    Google
    Urban Dictionary
    Answers.com
    rhymezone.com
    Merriam-Webster<>0
    wvcidfjoguarm

  • How to use .eps files in Adobe Photoshop CS

    I purchased some vectorshapes from Vectorstock, and downloaded .zip files to my desktop. I then extracted the files to the /presets/customshapes folder in Adobe Photoshop CS. (I have Windows 7). I then found out they were not .CSH files but Encapsulated PostScript or .eps files. How can I use them in Adobe Photoshop? Please help

    Thanks, that helps.

  • Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

    I use a  windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor..  I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run.  The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
    What does you system configuration?

Maybe you are looking for

  • Issue with PO Release strategy

    Hi experts, I have problem with Po release strategy in 5 to 10 purchase orders, i have created few purchase orders(2000 Po's) with same document type and company code ..etc and saved, then release strategy has been triggered. For few purhcase orders

  • Help with SimpleDateFormat and time

    Hi, I have a strange result when formating a time! Time test = new Time(0); DateFormat df = new SimpleDateFormat("HH:mm:ss"); System.out.println("my date: "+ df.format(test)); Result is 01:00:00 Why is this not 00:00:00 Thanks in advance, Pieter

  • UTF8 Support

    My platform: Ora 8.1.7 UTF8 Encoded, Portal 3.0, Win 2000 Prof. Enviromental Variable NLS_LANG=AMERICAN_AMERICA.UTF8 owa_util.get_cgi_env('REQUEST_CHARSET') returns UTF8 If I enter for example text "omega" in greek alphabet into the database using po

  • What is the timeline?

    What is the timeline and how do I  get in it?

  • I can't connect my Macbook OS X 10.5.8 to my office Konica Minolta bizhub C353 printer

    I can't connect my Macbook OS X 10.5.8 to my office Konica Minolta bizhub C353 printer. I tried through the IP address even downloaded the drivers