Adobe Photoshop CS4  runnig error - cant  load files

hi,
ive first time installed adobe cs software in my pc. i have never used this software before nor its previous version.
when i try to run adobe photoshop cs4 - it gives me error after loading for few things that "A required application library failed to load and the product cannot continue, please re-install the application"
ive re installed the application several times but that same error continues.
any help will b welcomed
thank you

OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
Download the trial version of Adobe Photoshop CS4 Extended
Unpack the contents to a folder/directory somewhere on your PC
You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
Select yes if prompted to replace existing files/folders.
Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
Problem should be solved.

Similar Messages

  • Adobe Photoshop CS4 Installation Error

    I'm new to this site and my computer has Vista Home Premium Service Pack 1.
    After I installed Photoshop CS4 trial, it failed to install Photoshop, but the rest were successful. I went to get more information and this is the message:
    Adobe Fonts All
    Error:
    Error 1603. Error 1907.Could not register font . Verify that you have sufficient permissions to install fonts, and that the system supports this font.
    Adobe Photoshop CS4 English Language Pack
    Error:
    Error 2.
    If there is a topic similar to this one, then I shouldn't be here!

    I have been using Adobe Photoshop CS4 for a few months now without any problems or errors.
    But last week.. i had a virus problem and decided to do a Clean Installation of my Operating System.
    I was not too worried because I have done this millions of times already... and know the process like the back of my hand.
    Well.. after the clean installation was complete, i started to load my applications.
    To my surprise.. Adobe Photoshop CS4 would not install. Nor would Adobe Illustrator CS4.
    It would get to the screen "Adobe is beginig the installation process" and would stall ..
    At first... i thought it would eventually complete on it's own.. but after a few attempts and hours of the same screen with no progress.. it was obvious Adobe was no longer responding at that stage.
    I searched high and low, night and day, over a few days trying to figure out the problem.
    I was trouble-shooting everything.
    In the middle of trouble-shooting, i took a break to surf the Net and see if i could find any suggestions when i ran into this Forum.
    Someone mentioned disabling your Internet Security & Windows Defender.. and i thought.. no way.. it can't be that easy.
    Well.. what do you know.. it was my Internet Security (Kaspersky Internet Security 2010)
    After disabling Kaspersky Internet Security 2010, Adobe flew right pass the part where it was stalling, and finished installation without incident.
    Adobe Illustrator CS4 also installed without any problems ...
    I just wanted to share my experience as i know how frustrating it can be when software refuses to install.
    Good Luck to everyone.. be patient.. trial & error. .. and im sure you'll figure it out.
    ========================================================================================== ===============
    ApologetX wrote:
    "downloaded Photoshop CS4 here and i tried to install as trial (30 days), Error: "Please insert Photoshop C4 into drive E:/ to continue instalation" what's wrong? What should I do? To install free trial? Tks"
    @ ApologetX
    I had a similar problem when i extracted the contents of my Adobe DVD and made an ISO file out of it so i would no longer need the DVD for installation.
    But what i realized is that.. Adobe will not install if it's installed from the ISO.. and during installation.. an error would pop up.. and ask for the DVD
    You probably have done something similar.
    Here's what i did to fix:
    - Extract the contents of Adobe Photoshop CS4 into a Folder
    - and install from that ..
    After i extracted the contents and installed from "setup.exe" .. the installation completed without error ..
    DVD
    - If you're having problems from the DVD .. then try to extract the Contents of the DVD on to your Desktop..
    and install from there ..
    Trial Installer
    - As for the Trial you are referring to .. im not familiar with it ..
    but try to extract the contents of it to your Desktop .. and go from there ..
    Good Luck

  • Error in VBA reference for Adobe Photoshop CS4 Object Library

    Hello,
    I'm using Windows 7 Pro, MS Office 2010 Pro and Creative Suite CS4 (with all updates).
    I will automate Photoshop via Visual Basic for Applications in MS Access.
    Befor using there the Adobe Photoshop CS4 Object Library I must reference it in VBA.
    But when I will du this, I get the message "Error loading DLL".
    When I will manually reference to the WIASupport.8LI File, I get the error: "Cannot reference this file"
    Can you give a tip, how I can solve this problem?
    Regards

    I have the same problem!  I have photoshop cc2014 (which we own) and the object library shows, but not for cs 5.1 (30 day trial).
    Does registering unlock something?
    Help please!!

  • Adobe Photoshop CS4 English Language Pack Error: Error 2.

    I've read another post indicating this error upon install of CS4. Many of the factors described do not fit my scenario, so I thought I'd post this again.
    Basically, I have Win XP SP3 all updates applied. Minimal services running. No software firewall. Everything installed just fine from Production Premium CS4 EXCEPT Photoshop. Error shown in subject line of this post is issued by installer.
    Photoshop won't boot stating it is missing files from it's folder.
    Wazzup?

    OK. This error drove me nuts and I have seen a thousand different "solutions" posted on various forums (none of which actually worked), but I think I found the magic bullet for this problem. This appears to be a result of corrupted/missing language pack files. Here's what I did to resolve it once and for all!
    You should already have a folder somewhere with the contents/Setup.exe for CS4 Design Premium
    Download the trial version of Adobe Photoshop CS4 Extended
    Unpack the contents to a folder/directory somewhere on your PC
    You will NOT be installing the Photoshop CS4 Extended application - only copying some files.
    Copy the "extensions" folder from Photoshop CS4 Extended, that you just downloaded to your CS4 Design Premium folder (there should be an "extensions" folder already there as well)
    Select yes if prompted to replace existing files/folders.
    Double-click the Setup.exe in your CS4 Design Premium directory and re-start the installation of Photoshop from there.
    Problem should be solved.

  • I'm trying to process RAW file images from my SanDisk memory card on Adobe Photoshop CS4 Extended and am unable to do so. Which level Adobe Photoshop do I need to process SanDisk images?

    I'm trying to process RAW images from my new SanDisk Ultra memory card and unable to do so. I'm currently using Adobe Photoshop CS4 Extended, is this the right one or do I need to update?

    …and you absolutely have to specify the camera model that generated those raw image files.
    2.—There's no such thing as "SanDisk images"
    3,— BOILERPLATE TEXT:
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I am trying to install Adobe Photoshop CS4 Extended and an error occurs.

    I am trying to install the above program and Error 30: The system cannot read from the specified device.  My DVD drive works so I don't understand why it is not finishing the install.  Then on my programs it says that I have Adobe Photoshop CS4.  Any ideas?

    This may do better posted in the Photoshop forum.

  • When trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas

    JJMack <[email protected]> wrote:
    =============
    JJMack  created the discussion
    "when trying to install adobe photoshop cs4 on my new computer with windows 7 home premium and get a message to contact adobe because of an error. any ideas"
    To view the discussion, visit: https://forums.adobe.com/message/7092876#7092876

  • How do I reinstall Adobe Photoshop CS4 - I receive error 6 stating that licensing for this product has stopped working.

    I previously installed Adobe Photoshop CS4 on my Macbook Pro. My hard drive crashed, and I had to get a new hard drive replaced. Now upon trying to reinstall CS4 from a backup copy CD (with licensing, serial number available), I receive an error 6 stating that the "licensing for this product has stopped working". Has anyone experienced this or know how to troubleshoot? Any advice appreciated. Thank you.

    Error "Licensing has stopped working" | Mac OS

  • "Adobe Photoshop CS4 has stopped working" error in Win7?

    Hi All,
    I’m getting the following error message when ever I try to use the Phtoshop and the program gets close.
    “Adobe Photoshop CS4 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
    Please see the following error event.
    Problem signature:
      Problem Event Name             :APPCRASH
      Application Name                  :Photoshop.exe
      Application Version               :11.0.0.0
      Application Timestamp         :48d3882e
      Fault Module Name              :KERNELBASE.dll
      Fault Module Version           :6.1.7601.17651
      Fault Module Timestamp     :4e211319
      Exception Code                    :c00000fd
      Exception Offset                   :0000e49d
      OS Version:                            :6.1.7601.2.1.0.768.3
      Locale ID:                                 :1057
    Please advise what is the problem..?
    my notebook spesification :
    Cpu intel core i5 3210m.
    Memory 4GB.
    OS Windows 7 home premium 64 bit ( 6.1 build 7610 ).
    Vga NVIDIA GeForce GT 630M 2GB.
    please help, thank you...

    Run the Creative Suite Cleaner Tool, reinstall the program. Make sure to run it with sufficient user privileges.
    Mylenium

  • Problem installing Adobe Photoshop CS4. Please help me.

    Hi Geeks,
    I am stuck with Adobe Photoshop CS4 (Trial) installation since last two days. I am desperately looking for help to get rid of this problem.
    My Problem:
    At the end of installation of Adobe Photoshop CS4 (Trial) i was prompted with en error
    message stating some of the components were not installed.  When I check the more information button provided in the error message window, it showed below error.
    “Adobe Photoshop CS4 English Language Pack Error: Error 2.”
    Still I could find the installed Photoshop in C:\Program files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    When I executed above file; application showed below error message and close it.
    “Some of the application components are missing from the application directory, Please reinstall the application.”
    I just try to run Adobe Device Central CS4 which was installed along with it.  It showed below error message.
    “The Localized resource files for this application could not be loaded. Please reinstall or repair the application and try again.”
    So My Problem is I am unable to open Photoshop CS4 after its unsuccessful installation.
    I spent more than a day in different ways as I explained below in more info section.  I am desperately looking for helping hands to fix this problem.
    I ever find this kind of difficulty with any other components installation in my 10 years of development experience.  Please help me.
    More info:
    (1) I have downloaded Adobe Photoshop CS4 (Trial) in this month (July 09) from adobe official site.
    (2) My PC OS Windows XP SP3.
    (3) Prior to install Photoshop CS4 I had Acrobat reader 8 and Adobe DW CS4.
    (4) After I read some stuff on net, I downloaded both Windows install Clean up and CS4InstallerDatabaseUtility.exe.
    (5) First I uninstalled all DW CS4 and Photoshop CS4 using add/remove then rebooted.
        then ran CS4InstallerDatabaseUtility.exe (which really did not removed as it did not
        find any Adobe component), then installed Photoshop CS4. No luck. same error.
    (6) This time I ran CS4InstallerDatabaseUtility.exe and removed DW CS4, Photoshop CS4 and flash and rebooted. Then I ran Photoshop CS4 as Administrator. Same thing repeated at the end of installation and when I tried to open the photoshop.  Finding a real hard time with it.
    Any kind of help to get rid of this problem would be highly appreciated.
    Thanks in advance.
    Regards,
    R Sunil.

    PS CS4 software itself has to be installed as Admin. Put the downloaded folder on the desktop (if not there already). Open the folder and right click on the .exe file and choose run as Admin.
    Install on C drive is the best stable choice.
    Before you do all this make the anti-virus is turned off. If windows defender is running turn that off too. If Adobe reader is installed renove that. Ensure no other adobe products are running in the background.
    During install the process will hang at 90 percent for about 10 to 15 mins. This is normal.
    After the software is installed reboot computer.
    After reboot go to start, All Programs and right click on PS CS4. Click on properties, Compatibility and check run as Admin. Hit Apply and OK to close. Run PS CS4 and update to 11.0.1
    Be Advised:
    Now the biggest problem you might run into is that the trial install went too far and failed. If this happened you cannot re-install PS CS4 trial because of the DRM that is hidden in the registry hive. The hidden DRM prevents people from installing the trial more then once and limits the trial at 30 days. There is nothing you can do other then nuking the hard drive and a fresh install of your operating system.

  • Photoshop CS4 Extended will not open file from Bridge.

    This is 2nd time this has occurred.  Last time I uninstalled CS4 and re-installed to fix it.  Prefer to not do that again.
    System: XP Media center, SP3,  3 GB memory, Athlon 64x2.  Generic - motherboard graphic card.  18 GB disk space remaining.
    Typical work flow is edit DNG files in Lightroom.  Once done, select DNG files in Bridge and under Tools run the Photoshop Image Processor which changes color profiles, sharpens and converts to JPEG and saves.  Done this probably a thoudand times.  Ran a batch Sunday afternoon fine.
    I may have interrupted an Image Processor batch that was just starting and glitched something.
    Now Bridge will open Photoshop but nothing gets imported with the Image Processor.  Also Bridge will not run a Batch.  Bridge will open Adobe Raw for editing a DNG but cannot load it into Photoshop.
    Once I try any of these things, Photoshop will usually not close/exit and many menu items are shaded out.  For example, opening a file or starting a new file is not available.  Activate/Deactivate not accessible.  Can Deactivate and Activate through InDesign. Photoshop seems OK otherwise if re-started after re-boot.
    Any ideas?
    Thank you.

    So far, no good.  Here is what I have done and current symptoms.
    1) I backed up all the settings and workspace files, then deleted them.  No change.
    2) No matter what I do, everytime I hold down the control, alt and delete keys when starting PS CS4 all I get is the Windows start settings "Adobe Photoshop CS4 Properties" box where you can select "Target" and "Start In" paths.  I do not get any dialog or confirmation to reset anything.
    3) Bridge successfully reset preferences using the Control key while starting it up.
    Everything about Bridge has appeared to function corectly before and after these changes.  But when the Tools/Image Processor or Batch is called, it starts Photoshop OK but nothing in imported to be processed.
    Photoshop opens (either from import or stand alone start) with menus partially functioning.  Under the file tab, nothign important works.  Cannot open a file, cannnot start a file, cannot exit - all grayed out.  But keyboard shortcuts do work and I can open a file or start a new file using the shortcuts.  Once I get a file open with the keyboard shortcut, most of the menu functions come back under the file tab and can be used and can exit PS.  The "X" in the upper right corner to close the program still remains greyed out and not functional.  The Activate/Deactivate options under Help remain grayed out.
    4) I deactivated the Suite from within InDesign and the I uninstalled only PS using the Windows uninstall utility.  I reinstalled PS from the CS4 Suite which of course reinstalled Bridge and some other utilities.  I reactivated from within InDesign and ran all updates from within InDesign since updates were still grayed out in PS. Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.)
    Problems still exist as described.
    5) Finally I deactivated again from within InDesign and re-installed the whole CS4 Suite without uninstalling anything before hand. I noticed that process did an uninstall before each module was re-installed.
    Problems still exist as described above.  I did notice that Photoshop showed itself still Activated (but grayed out) in the help menu even though I had previously deactivated the suite before the re-install.  Ran complete Updates from within Bridge.  Encountered an error (Adobe CSI CS4 1.0.1,Adobe Drive CS4 1.0.1,Adobe Extension Manager CS4 2.1:Failed to install.) but continued on. Everything else updated OK.
    I looked through the registry settings for the settings path as noted in referenced forum links and all looked correct.
    Additional Notes:  I installed the OnOne Plugin Suite 4 a few weeks ago.  Everything has run smothly since then until this problem poped up.  After the Uninstall/reinstall the OnOne menu option appears as normal.  As do my old Nik plug ins.  I doubt this has anything to do with the issue.
    Any more ideas outside of starting all over on a clean drive/machine which I really dread even contemplating?
    Thank you.

  • Adobe Photoshop CS4/5 Crashes when using the Move Tool

    Hello. I'm here because I'm having an issue with Photoshop.
    I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
    A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
    Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
    This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
    My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
    I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
    The error code, from Event Viewer:
    Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
    Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
    Exception code: 0xc0000005
    Fault offset: 0x65637275
    Faulting process id: 0xe28
    Faulting application start time: 0x01cb2bb3471d87bf
    Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    Faulting module path: unknown
    Report Id: b412e368-97ab-11df-8f49-001d60b646ef
    Details:
    System
    Provider
    [  Name]
    Application  Error
    EventID
    1000
    [  Qualifiers]
    0
    Level
    2
    Task
    100
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2010-07-25T05:15:57.000000000Z
    EventRecordID
    78845
    Channel
    Application
    Computer
    Gatherum
    Security
    EventData
    Photoshop.exe
    11.0.2.0
    4bf2d4f6
    unknown
    0.0.0.0
    00000000
    c0000005
    65637275
    e28
    01cb2bb3471d87bf
    C:\Program  Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
    unknown
    b412e368-97ab-11df-8f49-001d60b646ef
    Details in XML View:
    - <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    - <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
    <EventRecordID>78845</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Gatherum</Computer>
    <Security />
    </System>
    - <EventData>
    <Data>Photoshop.exe</Data>
    <Data>11.0.2.0</Data>
    <Data>4bf2d4f6</Data>
    <Data>unknown</Data>
    <Data>0.0.0.0</Data>
    <Data>00000000</Data>
    <Data>c0000005</Data>
    <Data>65637275</Data>
    <Data>e28</Data>
    <Data>01cb2bb3471d87bf</Data>
    <Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
    <Data>unknown</Data>
    <Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
    </EventData>
    </Event>
    System Specifications:
    Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
    System Manufacturer: HP-Pavilion
    System Model: GN697AA-ABA a6214x
    Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
    Memory: 2048MB RAM
    DirectX Version: DirectX 11
    Display Device:
    Name: NVIDIA GeForce 8600 GTS
    Manufacturer: NVIDIA
    DAC Type: Integrated RAMDAC
    Approx. Total Memory: 1010 MB
    Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
    Photoshop Version: CS4 Extended 11.0.2

    Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process.  That said, with a little research and care you can do it.  Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
    First, you'll need to know what your operating system capacity is.  For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in.  What version of Windows are you running?
    Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches.  There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
    http://www.kingston.com/
    It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade.  Every computer is different.
    If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
    -Noel

  • Adobe Bridge CS4 pops error when Update Option from Help is launched

    Hi All,
    when i m trying to Launch the Update from the help menu of Adobe Bridge it pops-up with a error messge instead of launching update.
    The error says
    Adobe Bridge
    Bridge is not in a position to check for updates.
    The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
    Ok
    Please help what is the probable cause for this.
    I have tried disabling the updateoption by
    1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
    2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
    I am using  Vista Build is the behavioural diff seen on XP n Vista
    Thank You

    Hey
    Apologies I dont think I had made myself clear.
    I am trying to package Adobe Photoshop CS4 which has Adobe Bridge as a component. As per the company standards, I am suppossed to be deploying this package & installing it using silent setup. Since this is a corporate environment, they do not want any auto updates to be enabled, as well as disable all menu items related to updates. Hence I had checked through the Adobe Support Site and followed the instructions provided by using the Adobe Deployment Toolkit and supressed the updates using the tool.
    Inspite of following the steps mentioned in the Deployment Kit and the guides associated with it, I was unable to supress the Updates options that reflects under Help Menu for Adobe Bridge CS4. All the other associated programs like photoshop, Extend Scripts etc the updates are disabled. The problem seems to be only with the Adobe Bridge Update.
    I have also tried disabling the update option by
    1) Adding the Enterprise DWORD value in registry HKLM\Software\Adobe\Updater
    2) Adding the "Update" "Suppress" value in "Application.XML.Override" file while installing the CS4 Suite
    Inspite of trying the above steps the update option in the menu is still enabled and when I click on the updates menu item I get the following error message.
    Adobe Bridge
    Bridge is not in a position to check for updates.
    The cause of the error may lie in the fact that an Internet connection can be established or that you are logged in as a user without administrator privileges.
    Ok
    Please advise,

  • Photoshop CS4 Extended - error 150:30 - "LicenseRecoveryLauncher" not supported on Mac OSX Yosemite 10.10

    I recently upgraded to Mac OSX Yosemite 10.10
    When I try to open Adobe Photoshop CS4 Extended it says error 150:30 Licensing for this product has stopped working.
    I followed the help advice which says to download some software to mend the problem but it wont launch - error message You can’t open the application “LicenseRecoveryLauncher” because PowerPC applications are no longer supported.
    How can I fix the problem?

    OS 10.7 and above uses the python script (.py) which is included in the License Recovery kit.
    Mac OS X 10.7
    a. Double-click the LicenseRecovery111.dmg
    Note: Leave this window open and proceed to the next step.
    b. Double-click your Hard Drive.
    c. Double-click Applications.
    d. Double-click Utilities.
    e. Double-click Terminal.
    f. Type “sudo python “
    Note: There is a space following “python”. Do not press Return.
    g. Drag LicenseRecover.py from the LicenseRecovery folder onto the Terminal Window and press Return. Note: Make sure that the Terminal window has the command and the path to the APP file. For example: "sudo python /Volumes/LicenseRecovery\ 11.6.1/LicenseRecovery/LicenseRecover.py”
    h. Enter your administrator user name and password when prompted and click OK.
    i. Follow the onscreen instructions.

  • Adobe Photoshop cs4 extended invalid serial number

    I just bought adobe photoshop cs4 extended from a large retail computer store.I had the trial version of photoshop cs4 extended.I uninstalled the trial version and installed from dvd.I got a Invalid serial number error.I am sure there was a software configuration problem .The reason ,the disk needs to verfy that you have the original disk,If that happens ,After installation ,Just delete this file C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db This is the location where it installed the serial . After deleteing it will create a new cache.db file and store the serial there that goes with that disk . When you open PS cs4 it will ask to enter serial again.Just enter the serial again that came with box ..I guess this would work also with adobe photoshop cs4

    I encountered the same problem with Photoshop CS5 - I had the trial version installed, and now bought the extended version, but it keeps saying the license key is invalid.  I did unistall, ran the cleanup tool, but it is still not working.  Any help is appreciated.

Maybe you are looking for

  • 2710ne : Nokia browser alone doesn't work.

    Brand new Nokia 2710ne. Firmware v06.13 09-04-10 RM-586. Operator Virgin Mobile France (unlimited data offer). No OTA update available. No Nokia Software Updater available. Device hard reseted. Opera Mini works fine with all kind of sites. The "inter

  • HTML hyperlinked images arn't showing in sent messages

    Hi, I've trawled the mac forums but haven't found an answer to this q as yet... I've tried to create a signature in mac mail, and it appears successful in preferences -> signatures and in the mail as I write it, but when I send it the images disappea

  • Eyedropper question

    When I click the Hand icon and try to use the eyedropper tool in my Hue and Saturation Properties panel, that panel disappears as soon as I click the eyedropper on the image. Also, the eyedropper does not do the function that it apparently should: al

  • Can't open PhotoshopCS4Extended all of a sudden

    Suddenly it won't open when I click on any button or link; and I can't find the exe. file in my program files.  So here's my question:  I have the install disc I bought a couple of years ago.  If I take the scary step of uninstalling CS4 from my comp

  • TileList with variable height renderer example?

    I am desperately searching for an example of how to implement a TileList with a variable height renderer. Well I guess to be more clear, I am sort of able to do this, but I have a renderer that uses a VBox, then an mx:Image. My single column TileList