Adobe photoshop CS6.Receiving the error "could not complete your request because it is not a valid photoshop document? Tried renaming the files and had working psd files and now all psd files will not open and getting the error listed. Anyone help please?

Could not complete your request because it is not a valid photoshop document. Tried renaming the file extensions and still no luck.

Nobody can tell you anything without proper system info or other technical details.
Mylenium

Similar Messages

  • Error, could no complete your request because the is not enough memory ram photoshop . My Pc this 16G ram, Help

    Help

    What request did you make?
    Seriously, what did you try to do that yielded that message?  Also, please give some details about your system besides how much RAM it has.  For starters, what OS and version of Photoshop?
    -Noel

  • Error: Could not complete your request because an unknown command was encountered.

    I've been working on a file in FreeHand 11 for a few months
    now, and for some reason after saving and closing the file about a
    week ago, I can no longer open it - on either of my computers (both
    PCs, one running XP, one running Vista). When I attempt to do so, I
    am presented with the following error message:
    Could not complete your request because an unknown command
    was encountered.
    Is there any possible way to fix this?

    Haha. I know. I was stupid... The last backup of the file is
    four months old. Unfortunately I've done quite a lot of work on it
    since then...
    One interesting thing though, is that I can still see the
    thumbnail picture in Windows Explorer. Also, I'm able to open the
    file with Fireworks, but none of the hidden layers (most of my
    work) are there.
    I just tried to open it again on my desktop. Same error
    message (but in German)...:
    "Ihre Anforderung konnte nicht ausgeführt werden. Ein
    unbekannter Fehler ist aufgetreten." :S

  • Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank

    @Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error".  I have uninstalled and re-installed software,  It works for a short time then I get that error again when i go to open a file.  Thank you!

    Without proper system information and other details like what files you work with  nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
    Mylenium

  • I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says  '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

    I want to edit my raw images on cs5 photoshop.  But when I go to open the .CR2 file it says 
    '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.  '' 
    When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says 
    '' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance. 
    Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''  
    I dont know how to get around this please help

    CR2 files from which Canon camera?
    Supported cameras are listed here
    Camera Raw plug-in | Supported cameras

  • Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".

    this was supplied by Ann Shelbourne.
    Saved Tiffs will not open in CS2 and generate a "Could not complete your request because of a program error".
    These files will often open in Photoshop 7.0.1 or in CS1 but not in CS2.
    The trouble may be caused by bad dates in the EXIF data and can originate from an incorrectly-programmed digital camera; or from a scan that was created after after Jan1 of this year (because of a known bug in some scanner software).
    If someone runs into the "Could not complete your request because of a program error" problem, and does not have CS1, try opening the Tiff in TextEdit.
    The EXIF data is right at the top. Check the EXIF data for bad creation dates and change any incorrect ones there.
    Save and close; and then the file will probably open in CS2 without a murmur.

    > If iPhoto causes problems why not open the images from the Finder?
    I get the error if I open a file from within iPhoto using "OPen in external editor" and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    I get the error if I do "Show file" in iPhoto to see the file in the Finder. Then, if I double-click and it opens in PS, and then alter it (or do not alter it) and try to save it over itself, or save it anywhere else.
    > And with »save it anywhere« You indicate that You use the Save As-command?
    Right.

  • When opening a file in Photoshop CC I get 'Could not complete your request because of a program error.'

    I can see this is a generic error message('Could not complete your request because of a program error.') and I have done my best to read through many of the responses.
    It occurs on the second, third, or sometimes fourth file that I try to 'Open', however I can still use the 'Open With' command through Finder.
    I have tried resetting the preferences as per Julieanne Kost's recommendations, I have reinstalled Photoshop CC 2014, Generator isn't turned on, I don't have any Third-Party plug-ins loaded, I have tried running it in Safe mode, and I have reset my iMac's PRAM.
    Photoshop doesn't appear to be writing a PSErrorLog.txt file?   (~/Library/Preferences/Photoshop CC Settings/PSErrorLog.txt)
    I haven't had any other issues.
    I am running Photoshop on OS X Yosemite 10.10.2.
    Please can you help me?

    Does anyone have any other ideas as this is very frustrating.
    Thanks,
    James

  • On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

    On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
    When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

    I tried to update and it keeps telling me to get the Application Manager. And this is what happens
    Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
    Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
    I followed the instructions it gave me to correct this issue:
    If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
    #Restart the computer and try the installation again.
    #If the installation fails, delete the InProgress registry key: 
    Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft. 
    Launch Windows Registry Editor.
    (Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
    (Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
    Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
    Delete the InProgress key.
    I was not able to find the "InProgress" key.

  • Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    Saving a Photoshop CC project from a Mac (in .PSD format) to a thumb drive and trying to transfer it to a Dell laptop with Photoshop CS6.  Will not open...Error message: could not complete your request because it is not a valid photoshop document.

    The file was corrupted somewhere along the way (assuming it was still readable on the Macintosh).
    The platforms don't matter, but you still need file transfer that doesn't corrupt files...

  • Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in

    Tried to "Open As" in PS a NEF file I modified in LR.  Got the following error message:  "Could not complete your request because the file format module cannot parse the file."  I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file.  HELP!

    If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
    There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
    Gene

  • Opening psd file in Photoshop coming up with "could not complete your request because of a program error"

    I spent roughly 6 hours on a (motion) project in Photoshop, saved as psd, and now every time I try to open it, it comes up with "could not complete your request because of a program error". This really annoys me, for one, it DOESN'T TELL ME WHAT ERROR! How can I get help from Adobe if they have no clue what error it is?
    I'm running windows 8.1  64 bit
    I'm using Adobe Creative Cloud
    I've tried everything people say to do, but nobody else but me seems to be using Photoshop for video editing. I really need this video.

    Does anyone have any other ideas as this is very frustrating.
    Thanks,
    James

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered.

    Aperture: When trying to open in external editor I get this warning when going to Photoshop CS6: Could not complete your request because an unexpected end-of-file was encountered. I can export and open via Photoshop or open directly from file-just not through external editor. Gerry

    Hi gerry,
    does this happen for a particular image only, or for all images?
    And does this happen only from your account or also from other user accounts?
    Léonie

  • I have Photoshop CS3 which I have used successfully for a number of years.  I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file.  What

    I have Photoshop CS3 which I have used successfully for a number of years.  I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file".  What do I need to do to open my NEF files??  Thanks.

    Thanks for the quick reply, CP
    FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop.  Beyond the metadata, here are no fonts or text in the file.
    1.  I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...".  The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files.  By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
    2.  I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF.  Same problem.  Turn ON Maximize Capability and it works.  As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
    3.  I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem.  Windows and Adobe progs are all updated.  Saving to a different HDD has no effect.
    The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem.  My guess it is a bug in PSD processing routines.
    If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
    Thanks again

Maybe you are looking for

  • Discoverer 9iASv2: does not run, produces java errors

    Hi, I am evaluating Discoverer9ias v2 for my company. We have set up 9iAs infrastructure on a Win2K box, with the main 9ias BI and Forms on another Win2K box. After installing everything, the disco plus demo ran fine for a few hours. After that the 9

  • Error when print/previewing joutnal report

    I am gettign the following error when trying to view a journal report PLEASE HELP! Can't open the log file Show Details: Error Reference Number: {CAC41EC9-7F12-46FA-A900-EB5E57E802D8} Num: 0x800456c2;Type: 0;DTime: 10/6/2011 11:03:14 AM;Svr: POCHFM02

  • What is use of Read-Text  command in Sapscript  plz replay

    What is use of Read-Text  command in Sapscript  plz replay i m geting problem with read-text command in sapscript as will as perform and endperform .

  • RESULTS RECORDING WITH FREE TEXT IN QUALITY MANAGEMENT

    Hi, How can I give free text of 300 chars In results recording? For a process order with batch number & recipe, (in which master inspection characteristics are mentioned which are linked to general characteristics.) I created characteristics (type CH

  • Vendor Payment Program

    What should be the first step in Vendor Payment Program?