Adobe Premier Elements 10. Burning Issues!!

I am curently using PE trial. I have edited AVCHD footage from my Panasonic HD video camera using Sony Vegas and used Sony Vegas to render to m2t with a view to burning using PE. The file size is 8GB. I have selected in PE Share: AVCHD. Pal Widescreen. Fit content. At 99% the burning process stops and a message tells me about Chapter Overflow and the burning process ceases.
Does anyone have a solution to this problem please?
Secondly, frustrated by this, I tried to burn the same video rendered via Nero recode to mp4. The file size is just over 3GB. This burned to disk fine until it reached 99% before returing to 95% and then completing the burn. At 35 minutes of the 49 minute video the picture began to stick jump stick several times before sticking on one frame.
Does anyone have a solution to this problem please?
I have used Sony Vegas as an editing programme because Pinnacle, who I have been using for years, inform me that for some reason Pinnacle HD does not work with Dell computers.
I had always used Nero for burning edited video until I downloaded Nero 10 HD free trial havingchanged my camera from SD to HD. When the trial ended some information debris was left behind in my computer and despite attempts to get info from Nero on how to get rid of it ie Nero Clean, it still remains there. I purchased Nero 11 last week and that will not burn either for the same reason. Internet forums indicate that Adobe was the best option to go for, hence using the trial version of PE 10. Now this.
Help welcome.
Monkeynuts123

If your Nero installation included the Nero InCD component get rid of it. It, and those of it's competitors (eg Roxio DLA), are well known to cause PRE write errors.
Did you place a Stop marker at the end of your timeline? If so remove it. The end of the timeline is automatically treated as a stop marker and adding one there can cause burn failure.
Try the Burn to Folder option for your project. Does that work?
If all you are trying to do is to use the PRE burning engine without any authoring you should give the completely free ImgBurn a try - it's pretty much the standard tool a lot of us use.
If though you want to use PRE to create your movie and then author it some more information would be helpful, especially concerning the camera, its shooting mode, how you got it into PRE, details of your computer and drivers ...
The following will help:
Got a Problem? How to Get Started
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Does Adobe Premier Elements 8 burn AVCHD DVDs in HDusing a standard burner? Does it need a bluray?

Does Adobe Premier Elements 8 burn AVCHD DVDs in HD using a standard burner or do you need to have a bluray burner? I have read comments stating you can't burn HD video straight to DVD. I need to check this out before I purchase it.
Thanks

Do not hesitate to ask. Adobe has always been a very good host, and allows for pretty open discussions on editing videos, regardless of what one is using.
Now, I have to admit that I have not seen Pinnacle Studio since the S-10 days. I had S-7, S-8, S-9 and S-10. S-9.4.3 was about the only one, that I really liked, but felt that it was a bit too much of a "big-button" solution, as were its predecessors and S-10. I moved to AVID Liquid, and did not like it. I found PrPro, and the rest, as they say, was history. I added PrE 4 to handle some consumer formats & CODEC's, that PrPro did not do well with.
I have done some Projects in PrE, mainly to keep me atop the questions in this forum.
I find that PrE, as of version 4, is more like Pinnacle, in that things are kept pretty much under the hood, and the big-button solutions abound. I am still much less comfortable with PrE, than with PrPro, though I did spend a bunch of time on Pinnacle Studio. Things just work better for me. I have to admit that I am a "control freak," and do not mind doing hand-work, if I can harness the full power.
I have not seen the more recent Pinnacle products, so cannot comment on them. Going back, my versions (except for 9.4.3) were very crash-prone, and seldom could complete a Project, without at least one catastrophic failure along the way. I learned early on to always hit Ctrl+S (Save), after almost everything I did. My PrE 4 has only crashed once, and that was OE on my part. Now, I do have a much more powerful laptop, than the computers that I used with most versions of Pinnacle, so it's probably not a really fair comparison. The Projects now, are much more involved, than in the Pinnacle days.
Doesn't directly address your question, and I'm not sure that many folk here have spent enough time with both NLE programs, to help. I would suggest that you post your question in the Muvipix Community (forum), as many users there have different programs, and experience in a bunch. While many use Adobe products, many others use different NLE programs. Maybe some know PrE and Studio (later editions, that what I know/knew) and can answer your question directly.
After Studio 10.5.1 update killed (and I really mean "killed") a brand new workstation, I swore that no version of Studio would ever find its way inside my edit suite. That was when I went to AVID, but soon dumped that. Though I had used many Adobe products for decades, I have no idea why I did not go to Premiere Pro earlier. My bad.
Good luck,
Hunt
PS - I also feel that most salespeople lick their lips, when they sell an AVCHD camera, as they know that the customer WILL be back for a much more powerful computer.

Adobe Premier Elements Video Editor will not open

I just installed version 12 of Adobe Premier Elements on my Windows 7 (64) system and am unable to open Video Editor. I receive a message that the display driver is not current and a newer version would make the program run more efficiently. After some time, the video editor stops trying to load. I have verified all windows updates are loaded and that I have the most current Quicktime version. I have also unloaded and reloaded Adobe Premier Elements but this issue continues to persist. Please assist.

blee3874
I suspect that this might be the immediate area to pursue
1. What is your video card's/chip's make and model?
AMD Radeon HD 8730M, Intel Graphics HD 4000
There have been discussions here about problems with Premiere Elements and a dual video card set up.
http://forums.adobe.com/message/5747654
What happens if you disable the Intel Graphics HD 4000 and just work with the AMD video card?
This is one of John T. Smith's and Hunt's favorite subjects. So we should be hearing from them soon. Meanwhile their presence can be felt in the link that I have referenced on this subject of dual video cards.
More later.
ATR

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels?

I want to create a HD disc with my Adobe Premier Elements but I am getting low resolution. When I go to share the DVD to disc the form only offers 8pixels at the bottom. How do I burn this DVD in HD with higher number of pixels? I have read other forums on burning HD DVD's but I do not see the option to turn the 8 pi into 40 pi the one forum recommended. I want my DVD to be HD so I may sell these videos online for my business. I can't sell them the low quality they are burning now. Hopefully you can help me. Thanks.

desalvom
Thank you for your reply.
You cannot burn your high resolution video that you can view on your computer to an AVCHD on DVD disc
that will replay through a regular DVD player. But players are marketed under a variety of names with
different support opportunities. One manufacturer may call its product MultiMedia Player, media player, Blu-ray player,
etc.The bottom line is the specifications for each of the players that are candidates for the playback of
the AVCHD format on DVD disc or the format of interest.
If you upload your HD (1920 x 1080) video to YouTube, YouTube converts the video to flash format, but it goes up as the HD video.
But, beware. Look at the YouTube viewing setting when your uploaded video is playing back. The YouTube default is not
HD. It might be 360p, 480p. If you have a 1080p video, then before the YouTube playback, you should be looking
at the video with the YouTube 1080p HD setting for best viewing. That is a YouTube matter.
Best results depend on you
a. setting up the Premiere Elements project preset to match the properties of the source media. That means, if
you have 1080p source, you (manually) or the project (automatically) set the project preset at
NTSC
DSLR
1080p
DSLR [email protected]
or the PAL counterpart, depending on your region need.
b. if you upload your video to YouTube using the Premiere Elements feature, there is a HD preset, but you cannot
customize it.....if you need customization, then you can export your Timeline to a file...in this example
Publish+Share
Computer
AVCHD
with Presets = MP4 H.264 1920 x 1080p30 or PAL counterpart
and then customize the preset under the Advanced Button/Video Tab of that preset. In increase quality, you might look to increase
the Bitrate under Advanced Button/Video Tab settings - without compromising the file size.
Then you would upload that file to YouTube at the YouTube web site.
All of the above are factors that need looking into in order to determine the why for what you wrote
I have published a shortened advertisement video to YouTube- say 5 minutes-
and it is low quality
Often SD video upscaled to HD can present poorly. But, you are dealing with a HD workflow so that should not be introduced into the matter. The setup of the project and
the properties of the source video are important, but let us start with the above and rule in or out those considerations first.
Thank you. As always, any clarification needed, please do not hesitate to ask.
ATR

Adobe Premier Elements 7- crash-when burning says" Please insert a blank disk" and already a disk in

I have a Adobe Premier Elements 7. I have had a lot of problems with it of crashing and not burning.. I just had my computer wiped out and installed everything back on like windows xp service pack 3..etc. First I have Windows XP service pack 3 with an Intel Core 2CPU ,6400 @213GHz, 2.13 GHz, 1.98 GB of RAM. When I went into disk menus premier elements 7 crashes... why is that??? also I tried to burn a DVD and does the progress of burniing and almost done burning WHILE there is a dvd in the drive and says"Please insert a blank disk and click ok to burning" why doe sit do that also? I just had adobe reinstalled and my computer wiped out? Please respond and help.. I am using this program as a business of video editing and nee this solved.

Along with Steve's questions, let's talk about the process of Burning a DVD-Video.
From PrE, which is doing the authoring of the DVD-Video, the first thing that happens is a quick check of the Project and the Menu Set chosen. This happens in an instant. Next, the program must Transcode the Timeline to MPEG-2 that is fully DVD-compliant. This takes some time and is a very intensive process, stressing the computer, and also heating things up greatly. This process will often cause a poorly ventilated, or poorly cooled computer to crash with either a reboot, or a BSOD (Blue Screen of Death). Every component, save for the video card, will be stressed like few other programs can do. PrE uses a 2-pass Transcode, where it goes through the entire Timeline, and maps out sections with high motion, or great detail. It builds a "script" on how to proceed, and then goes back at the Timeline with that script, but also still looking for ways to improve things. This is about 90% of the entire Burn Disc process. Nothing has yet to be burned. Instead, files are created in the Scratch Disk folders. Now, the program takes those newly created MPEG-2 files, the Menus, and all navigation such as Markers, and assembles them into another working folder, in the full DVD structure of VIDEO_TS folder with the IFO, BUP and VOB's. When this is done, the actual physical Burn starts. This is quite a ways into the total process. It is at this point, that the program looks at the burner and the blank media, and not before.
When the program cannot get the necessary info from the burner, or the blank media, it will throw an error message, similar to yours. Also, "SenseCode Errors" usually indicate a problem with the burner, or the media.
Now, let's address this last bit. Is the firmware for your burner up to date? If not, update/flash the firmware. This will be available from your burner mfgr's. Web site. Next, what brand of blank media are you using? Verbatim and Taiyo Yuden are the most recommended brands. Memorex, TDK, newer Ritek and all store brands should be avoided at all costs. Last, is your burner a fully-certified multi-drive? If so, it should be able to handle +R, or -R media. What type are you using, and are you sure that this is blank media, and not a disc that you have already burned, or even attempted to burn?
Hope that we can stop the crashes, and get you to burning.
Good luck,
Hunt

Adobe Premier Elements 10 has stopped working error message/Audio issues

I'm working on a project for about a week. I almost finished it, "shared" it to my computer, and watched it thru windows media player. I thought of something else that I could add to the audio, so I went back into the project in PE10 and put small (2-3 seconds) audio clips on audio track 3. Once I did that, PE 10 would not allow me to put any audio effects on that track. (I went into some older longer projects that I have and it allowed me to put effects on any audio track).
So, I moved my short audio clips to the Narration and Soundtrack tracks. It finally highlighted the App;y button for the audio effects. Now, the problem is that I can't play or click onthe timeline or move the timeline indicator without PE10 closing out of my video. As soon as I try to do anything, it says "Adobe Premier Elements 10 has stopped working" and it closes the program.
I can open my other projects and everything seems to work fine on those and it doesn't close out, but it won't allow me to do anything in this particular project.
Again, I have been going into and out of the project for a week and all of the sudden it won't let me work on it. It's only about a 3 minute project, so I don't know why it would have trouble.
Oh, and it also un-rendered everything.
Any thoughts?
Thanks!

LOTS more information is needed for someone to try and help
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Adobe premier elements 11 downloaded but will not install

adobe premier elements 11 downloaded but will not install?

Hunt
What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
So, Meyeswalter, so that we can dispel those thoughts
a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
Thanks.
ATR

Comment convertir un film enregistre sous "projet adobe premier element"pour le visionner sur tv?merci

J'ai enregistré un film sur "projet adobe premier elements(*.prel) et je n'arrive pas à le lire sur la tv.Peut-être faut-li le convertir?mais la le problème est entier.Merci de m'aider.

PLIPLI
What version of Premiere Elements do you have and on what computer operating system is it running?
Without further details from you, I will generalized...
If you want to take your Timeline content to a disc that will play on a regular DVD player attached to the TV, then you
use the Publish+Share (Share in earlier version)/Disc/DVD disc with preset either PAL_Dolby DVD or PAL_Widescreen_Dolby DVD.
In more recent versions of Premiere Elements, you can burn your Timeline content to a higher resolution format on DVD disc (AVCHD DVD), but
this AVCHD DVD cannot be played back on a regular DVD player. It needs Blu-ray player that supports AVCHD DVD or one of those multimedia players
that supports AVCHD DVD.
There are several considerations that go into getting good results. We can go over each once we get the above basic information.
For your review until we exchange further information.
http://helpx.adobe.com/premiere-elements/using/sharing-dvd-or-blu-ray.html
Your current problems could be related to
a. a burn to disc issue (the burn to folder needs to be done to define the burn issue)
b. your creation of AVCHD DVD and trying to play it with a regular player
c. problems with disc
d. other
So lots to work through.
Thank you.
ATR

Slideshow in adobe premier elements 7.0

I recently installed this program & created a slideshow on what I will call PC1. Something happened and it would no longer open the slideshow editor. I backed up the catalog & was able to complete the slideshow on PC2. I have now uninstalled & reinstalled adobe premier elements 7.0 twice on PC1 trying to get the slideshow editor to start working. I have cleared all the temp files. I am able to see the slideshow as I backed up the catalog on PC2 and restored it on PC1. Any thoughts on how I can get the Editor working on PC1 again? It is a faster machine & I really need to use it to burn a DVD of the project. Many thanks smanson

Welcome to the forum.
First, give us a complete description of the two systems. The more details the better: OS, CPU, RAM, Video card and hard drives.
Next, tell us about this slide show, expecially the number, size and format of the slides. The more, the better.
Have you sized the images to no more than 1000x750?
Have you looked over the FAQ's in this forum? There are some great ideas on optimizing one's system there.
These steps will help others see possible issues, so that they can help you better.
Good luck,
Hunt

Upgrade to Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0

I currently have Adobe Photoshop Album Starter Edition 3.0
I would like to purchase the Adobe Photoshop Elements 4.0 plus Adobe Premier Elements 2.0. for more photo and video options.
I'm offered one of two options. Either buy the Full Version or the Upgraded version of Adobe Photoshop Elements 4.0 plus Adobe Premier elements 2.0.
I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0.
Will the Upgrade over the Full Version be sufficient?
Thanks,

The upgrade only applies if you already have a paid-for version of these programs. You cannot "upgrade" SE.
> I don't want to lose any of my videos or photos in my Adobe Photoshop Album Starter editon 3.0
That isn't an issue. Your pictures aren't "in" PSA SE, it is just cataloging what's on your disk. In any case, the catalog will be usable by PSE 4 Organizer, so all your tags etc. will be preserved.

How to narrate in Adobe Premier Elements?

I am using an external Yeti microphone to record narration in Adobe Premier Elements. I have set up the microphone in the system preferences and also in the Adobe program. I can hit record but there is no sound on the playback. What setting am I missing to get this to record actual sound?

Is that a USB mic? Premiere (both Elements and Pro) can have issues with USB mics. Some work, but some do not.
If USB, test with a mic plugged directly into your sound card, or the MoBo's embedded chip via a 1/8" mini-plug.
Good luck,
Hunt

Adobe Premier Elements 11

Using Adobe Premier Elements 11 I experience "freezing" when I:
add some info to a picture while making a DVD, save the program then access the button to continue scanning the photos for the next spot in which to add more info. Not always, but often if freezes the program. Norton tells me I'm using 4,095 MB of memory and I have 8 GB in the Dell Inspiron desktop. Sometimes the program quits when I've asked to, "Wait for program." Any help?
I have noted that my installation shows two instances of (Adobe Premier Elements 11 and Adobe Premier Elements) as having been installed at the same time. One is 96 Kb large and the other is 1077 Kb large. Is this normal?

Ron
You wrote
I have noted that my installation shows two instances of (Adobe Premier Elements 11 and Adobe Premier Elements) as having been installed at the same time. One is 96 Kb large and the other is 1077 Kb large. Is this normal?
Yes, Normal.
Adobe Premiere Elements 11.exe (95.9 KB) opens first
and
Adobe Premiere Elements.exe (1.05 MB aka 1075 KB) opens second
Two processes of Premiere Elements 11. They are found in Windows 7, 8, or 8.1 64 bit
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 11
and in the Premiere Elements 11 Folder are these two .exe files.
When you install the program, the desktop icon for the program targets the Adobe Premiere Elements 11.exe to open to the Welcome Screen. You can bypass the Welcome Screen by creating a desktop icon for the Adobe Premiere Elements.exe and using the latter to open Premiere Elements each time so that you do not run into the Welcome Screen.
Alternately, you can set the Welcome Screen "On Start Always Launch" = Video Editor.
You wrote
add some info to a picture while making a DVD, save the program then access the button to continue scanning the photos for the next spot in which to add more info.
Although we are glad that you believe you have found your answer to the issue presented, I would ask
a. What are the formats and pixel dimensions of the photos being imported in Premiere Elements project?
b. Not sure what that " ...continue scanning the photos for the next spot to add more info" is all about. Are you going into the Elements Organizer 11 which comes with Premiere Elements 11 and using File Menu/Get Photos and Videos/From Scanner? If so, where do you scan the photos to? How are you importing them into Premiere Elements 11 Expert workspace - Add Media/Files and Folders/Project Assets and to Timeline or something else?
Besides photo formats, pixel dimensions, and computer resources, your workflow sequence of events (maybe some multitasking) may be involved in this freezing (other than you are too fast for the program).
Please review and consider.
Thanks.
ATR
Add On...From what you wrote, I am guessing that you are working on Premiere Elements 11 running on Windows 7, 8, or 8.1 64 bit. If so, that would put you in a better computer resource position than otherwise. Also, watch out for antivirus interference.

Adobe Premier Elements 11 and Mac OS 10.9

Yesterday I downloaded from Apple Apps Store Adobe Premier Elements 11 to my iMac OS 10.9 The process has gone untill "loading exporter quicktime host bundle" and nothing more
What shall I do?

franko2014
It would appear the issue is not isolated.
http://feedback.photoshop.com/photoshop_family/topics/premiere_elements_not_loading_with_m avericks?page=1
http://feedback.photoshop.com/photoshop_family/topics/photoshop_elements_11_failing_on_ima c_after_upgrading_to_os_x_mavericks
http://feedback.photoshop.com/photoshop_family/topics/premiere_elements_not_loading_with_m avericks
I am in no position to know just how much support you can get from Adobe since Premiere Elements 11 is no longer the current version on these Mac Store purchased products.
You could try Adobe Chat and see how far you can get. The following link typically proves helpful for that purpose.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
When the link opens, click on "I still need help" to bring up the Adobe Chat pop up.
Let us know the outcome.
Thanks.
ATR

How to download Adobe Premier Elements 10.0 and Adobe Photoshop Essentials 10.0

Two years ago or thereabouts I purchased Adobe Photoshop Essentials 10.0 ande Adobe Premier Elements 10.0. I lost the disk. I want to download the programs from the internet. I have my serial numbers.

I'm not exactly sure what 'Essentials' is, but you can get Photoshop Elements 10 and Premiere Elements 10 from https://helpx.adobe.com/download-install.html in the 'Downloads for older versions' section.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

Adobe Premier Elements Version 12 Registration

When I open up my Adobe Premier Elements Version 12, it asks me to sing in to my account but when I do it displays an error message
"There was an error contacting the server. Check your internet connection and try again"
Internet works fine.
It is not a password issue as this has been reset
Any ideas?????

storminjackass
Premiere Elements 12....what computer operating system?
Are you working from a home computer or from a computer which is part of a school or company network?
Since you do not have the current version (which is 13/13.1), it is probably that Adobe will can help since it typically
supports only the current version.
If you get into that type of situation, please review and consider the following solutions
a. SLCache Folder renaming et al
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
and
b. ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
Please let us know the outcome.
Please do not post contact information in order to avoid nuisances to your tel and fax and email address.
Thanks.
ATR

Adobe Premier Element 8 installation problem

We recently upgraded our computer from Windows Vista 32-bit to Windows 7 64-bit. In order to do this we had to reinstall the whole OS and we lost all of our applications. We have a license for Adobe Photoshop Elements 8 and Adobe Premiere Elements 8. We were successful at installing Adobe Photoshop Elements 8, but when we tried to install the Adobe Premiere Elements 8, it gave us the following error: "Either Adobe Premiere Elements 8.0 is not installed on the system or has corrupted. So please install Adobe Premier Elements 8.0 and then retry.". It appears as though the installer thinks it should be performing an upgade. Any ideas?

Could be a simple compatibility issue. not sure if PSE/PPE 8 is even qualified for Win 7. Try to run the installer in one of the compatibility modes.
Mylenium

Adobe Premier Elements 10. Burning Issues!!

Similar Messages

Maybe you are looking for