Adobe premiere elements 11 rendering at lower bit rate than i select

Hi, I'm using Adobe Premiere Elements 11, 64-bit Windows.
I keep trying to render a project at a bit target bit rate of 10.05 MB/S (.h264 1080p MP4) but the resulting .mp4 file keeps coming out with an average bit rate of around 7000kb instead of 10,000kb...
The source files used in the project are 17mbs..
Other projects are rendering fine.
Would be very grateful for some advice.
Edit: Now realised it's happening to a substantial fraction of my projects. I am being very careful to select the right render settings

Sminty
Please confirm
Premiere Elements 11
a. Export as
Publish+Share
Computer
AVCHD
with presets = MP4 H.264 1920 x 1080p30
and, under the Advanced Button/Video Tab of the preset, what are your setting for Maximum Bitrate to go along with the 10.5 Mbps Target Bitrate (the units there are Mbps or Mb/second which is megabits per second).
b. I believe that each encode needs to be looked at separately.
One example...Original AVCHD.mov file, 1920 x 1080p29.97, 69.9 MB, 12.579 seconds, and Bitrate Overall 46.6 Mbps and Bitrate 45 Mbps.
I decided that i would try for an AVCHD.mp4 export whose properties read out would include bitrate 10.5 Mbps.
I selected Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p30, and, in the Advanced Settings set Bitrate as VBR 2 Pass
Target 10.5 Mbps and Maximum 15 Mbps.
The result was an AVCHD.mp4 1920 x 1080p30 file with a Bitrate Overall 10.8 and Bitrate 10.6 Mbps.
Second example..Original AVCHD.mov file from another camera, 1920 x 1080p30, 24.0 MB, 14.14 seconds, and Bitrate Overall 14.4 Mbps and Bitrate 12.2.
I selected Publish+Share/Computer/AVCHD with Presets = MP4 H.264 1920 x 1080p30, and, in the Advanced Settings set Bitrate as VBR 2 Pass
Target 5 Mbps and Maximum 10 Mbps.
The result was an AVCHD.mp4 1920 x 1080p30 with a Bitrate Overall 5.17 Mbps and Bitrate 5.006.
Please review and consider.
Thank you.
ATR

Similar Messages

Apple Lossless lower bit rate than AIFF - why?

Why is the bit rate of Apple Lossless lower than that of AIFF for the same song?

Chris2881 wrote:
I can understand the file size thing but why the lower bit rate?
Chris2881,
In your iTunes library, the figure shown for bitrate is just the file size divided by the duration of the song (with adjustments for bytes to bits, and mega to kilo). If you look at an Apple Lossless file, the size and the bit rate are each about half of a standard AIFF for the same song.
As noted by fullcream, the Apple Lossless format is compressed but not lossy; it contains the full audio content of the CD (or AIFF) original but in a more compact file. Unlike AAC or MP3, Apple Lossless does not remove any audio content.
Ed

Adobe Premiere Elements 8 is low on system memory. XP

Hi, I am running Adobe Premiere 8 on Windows XP 32 bit and I keep running into an error message that says Elements 8 is low on system memory. Usually shortly after the program crashes and closes. I've done some searching and the only fix I have found have been for Vista and 7 users but not for XP. I am using a ATI Radeon HD 4670 graphics card and I have 4 gigs of RAM in the computer. Any help in resolving this issue would be greatly appreciated.

Hi!
I've been working hard. Here's an update.
I gave up on my first project. I started a new one, in a new directory. I tried to make sure my machine was as clean and lean as possible.
Here's a recap of what I did so far:
. Updated graphic card driver from the manufacturer's site
. Turned of PrE automatic rendering
. Turned off Adobe Auto Analyser
. Disabled Antivirus (McAfee)
. Disabled ScreenSaver
. Checked event viewer. Seems Ok.
. Disabled rxfiler.exe using a utility from tools.roxio,com
. Upgraded Quicktime from 7.6.8 to 7.6.9
. Ran memtest86 4.1 - Memory OK.
. Disabled windows indexing.
. Killed a few processes before each session: vid.exe (logitech), toaster.exe (Dell), jusched.exe (Javaupdate), dsupd.exe (dell), cocimanager.exe
. Executed BCDEDIT /SET INCREASEUSERVA 3072 to allocate more memory to the programs.
Before I start PrE 8, memory usage is 1.26 GB.
Then I added one clip at a time wiht a transition. Rendered the clips. Click on Share then disc. This is when the BSOD appeared in my first project.
After I would save the project under a new version and add a new clip and a transition. Each time, it seems that only the new clip has to be rendered.
Everything was fine with the first 13 clips. Timeline is about 26 minutes, memory usage 2.46 GB.
I did not have the "very low on system memory" message.
Then I closed PrE8 and made a copy of the project files on an external disk (and went for lunch).
When I came back I started PrE8 and reopened my project. I checked on the timeline to see If I had to render the videos. I was surpised to see that there
was a lot to render. I did, it took about 20 minutes. After that, I clicked on Share and Disk and guess what: BSOD!!!!!
Now, each time I open a version of my project (I have 12 of it), it seems I have to render almost all the timeline.
Questions:
1. Is it normal that I have to render almost every videos every time?
2. Could it be the fact that the rendering process is long (20 minutes) that PrE crashed badly (BSOD) when I try to burn a DVD?
3. Does it mean I have to create my video montage in a single session (never close PrE)?
4. Any suggestion on how I could recover from this situation and move forward with my project?
Thanks,

Adobe Premiere Elements 12 will launch and then vanish

Okay so just bought Adobe Premiere Elements 12. Loaded it up and went to run it. First time I ran it I get the Adobe Premiere Elements 12 Launch pad, you know where you select the Organizer or the video editor. I select video editor, it gives me a sub menu asking if I'm opening an existing Project or a new project. I select new project. the Video editor opens and I get a pop up windows stating "Please Log-in with an Admin account to access Adobe premiere Elements." I hit 'ok' and the video editor promptly vanishes leaving me at the launch pad which I close. I go to the short cut, right click on it and select "run as administrator." and I re-launch the program. Back to launch pad, select video editor, select new project. The video editor loads and appears to be working for about 3 seconds and then it vanishes. No error window, no crash report nothing. Just 'pop' it's gone.
Any idea what I can do about this? I'd really like to use the software I just bought.
Compute specs:
OS: Windows 7 Home Premium
-updated system drives yesterday
Prossessor: AMD Phenom 2 X6
8Gb ram
NVidia GeForce GTX 460 4GB card
-Drivers updated yesterday
Primary drive is a solid state 128gb
2 secondary SATA drives at 1TB each
Premiere Elements is loaded on the 1st of the 2 secondary drives.

Please confirm...
a. Are you running the program from a User Account with Administrative Privileges as well as the Run As Administrator from the right click of the program's desktop icon?
- I am running it from an admin level account.
b. Did you install the program to the default drive C location...you mention "Premiere Elements is loaded on the 1st of the 2 secondary drives", but is it the drive designated C?
- No. all I have on my primary drive (C:\) is windows, drivers and scratch disk. All my programs outside of windows are loaded on the drive designated J:\
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
- I did not before, but I just updated it before responding here. No effect.
d. Does your computer use just that NVIDIA video card/graphics care? Is there a second card displayed in Device Manager/Display Adapters?
- the NVIDA GeForce GTX 460 is my only video adapter.
e. Does the problem exist with and without antivirus and firewall(s) disabled?
- Yes. I shut off Kaspersky and tried running the program via the launch pad. no change.
You say that the crashes occur when you select Video and new project. What happens if you select Organizer instead? Still crash?
- If I go into Organizer the system seems to run fine. I loaded Organizer about 20 minutes ago and it's still up and running just fine. But in that same time span I've tried to launch premier elements several times. It still crashes after a few seconds.
New data though. Can't tell if it's from Premier, or something else. a couple minutes after the latest attempt to run Premiere Elements I found a new window with the header "CAHeadless Debug Event". The Window reads:
CAHeadless has encounter an error.
[..\..\Src\Sequence\Sequence.cpp-2233]
and then I have a button that reads "Continue".

PRE 7 Error: Adobe Premiere Elements.exe stopped working

Today I started getting Adobe Premiere Elements.exe has stopped working and than the program closes. Does anyone know how I can fix this? I un-installed and re-installed it and still get the same thing.

Just as a possible additional clue. I have been editing a video of 1:40 hours length for the past 5 hours. PRE7 behaved well. Then, after saving my project, I tried to apply some colour filters (Auto Levels and Colour Balance HLS). PRE7 then crashed and is now unable to open the same project (which is 1.84 mb in size WITHOUT the filters saved in it) but can open an autosave version of 1.5mb in size. As that is 1.5 hours older, it is of little help to me, though.
(Note: this after I gave up and redid this video, after PRE8 totally crashed and PRE7 couldn't reopen this project file either.)
So there seems to be an error regarding the project file size and some weird "setting" that prevents PRE7 from opening that project.
(Note 2: I have now wasted so much time with this, that it is getting beyond just annoying. Adobe should fix this ASAP or provide all users a free copy of Premiere CS4 - if that is any better, that is. As no other video editor can import PREL files, one basically starts from scratch, which is even more annoying.
Note 2b: I have gone through all the suggestions made, am not running an Nvidia graphics card and am now at a loss as to what to do to successfully reopen this project file.)
Helmar
PS: Attached in the case anyone cares, both PREL files. The large one that doesn't open, the old one that does. Happy bug hunting, Adobe! The licensing code for PRE CS4, please send to the email attached to my profile. Thank you!

Adobe Premiere Elements 4 - Rendering Problem

If I create small slide shows in Photoshop Elements 6 (ranging from 59 - 125 JPEG Still Shots with captions and/or added text)I can then send each slide show separately into Premiere Elements 4, make further adjustments and add title pages, I can then render and save as a project.
If I take several of these slide shows as a block and send them to Premiere Elements 4, I get a Premiere Elements window stating "Adobe Premiere Elements is running very low on system memory, please save your project and proceed with caution". So I click OK and save. I then go to render, after 2-4% rendering I get a video Preview Error window with various warnings including, "Out of Memory - Unknown Error" or "Disc write error:- verify drive connections, available disc space and disc access privileges. Then save close and relaunch project".
If I open a slide show project in Premiere Elements 4 and try to add a second slide show to it via the get media button - in the Add Media window I get Look in 4.0 and five folders appear (no icons for projects) I can then look in files of type and there is no listing for .prel files so tried "all files" and the icons for the slide shows appear. I then select a second slide show to add to the first and click open. I now get an Add Media Failure window which gives file addresses and the error reads "File format not supported/ one of the necessary components may not have been installed".
I have run the installation disc again to repair any installation errors but to no avail.
My computer is an Intel core 2 duo 3.16 GHz on an Asus P5Q P45M M/board with Gigabyte GF9600GT Graphics card.750GB HDD & 4GB Ram.
Hope somebody can help.
Bob Smith.

Most likely your photos are too large. We recommend using no larger than photos no larger than 1000x750 pixels in size. (The actual file size of the JPEGs has nothing to do with this, since JPEGs can be highly compressed.
http://www.adobeforums.com/webx/.3bb8822c
Resize your photos and you'll see a huge boost in performance.

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

How do I write a text below the Lower Third line, in Adobe Premiere Elements 12?

Ruth Schreiber
To what Premiere Elements 12 title template (lower 3rd type) are you referring?
It is not clear what you want to do.
a. Are you able to double click the template to open it in the program's Titler?
b. Can you select the present text with the Selection Tool to move it to custom locations?
c. Can you edit the existing text in the template?
The following uses the Aquarium lower 3rd template...where do you want to write text in the template?
We will be looking forward to your follow up.
Thanks.
ATR

MPG smart rendering in Adobe Premiere Elements 7?

Hi,
Does anybody know if Adobe Premiere Elements 7 supports smart rendering of MPG files? I have a Sony HDD camcorder (non-HD) and would like to combine clips into longer MPG files without reencoding.
In the past I have used MainConcepts MPEG Elements, but that is not supported anymore (and there were issues with in anyway).
Thanks.
Ralph

I have Mainconcepts MPEG Elements 1.01 installed in PRE 7.
The only thing that I found that doesn't work is capturing. When I want to capture, I disable the plug-in by changing the name of the Mainconcept folder:
From:
C:\program files\common files\mainconcept\MPEG PRO PE
To:
C:\program files\common files\mainconcept\MPEG PRO PE.RJJ
When you disable the Mainconcept Plug-in, you won't be able to edit any projects that were created with a Mainconcept project preset. Well, actually you can, but PRE puts the project in "Desktop" mode.
There is a registry entry that the Mainconcept Plug-in uses during installation to determine which version of Premiere Elements the plug-in is intalled in and which version can use the plug-in.
HKEY_LOCAL_MACHINE\SOFTWARE\Adobe\Premiere Elements\CurrentVersion
ApplicationPath: D:\Program Files\Adobe\Adobe Premiere Elements 7.0\
Plug-InsDir: D:\Program Files\Adobe Premiere Elements 7.0\Plug-ins\en_us
I also have version 2.0 installed and when I want to use Mainconcept Plug-in with 2.0, I edit the registry settings and change 7.0 to 2.0 in the path names.
Smart Rendering does work in PRE 7 when you have the Mainconcept plug-in.
When you start Premiere Elements 7 after installing the plug-in, make sure to hold down the CTRL-ALT-SHIFT keys so the plug-in cache is reset.

Motion rendering in Adobe premiere elements

Hello,
I recently purchased Adobe Premiere Elements 11. I am on windows 7.
In one of my vidoes, motion is not rendered properly. For example, a talking persons lips are significantly blurred. The same video when played in Windows Media Player doesn't show this behavior. The video is AVCHD, 1080p, 30fps. I did not see a project settings preset that matches exactly those settings. So I selected AVCHD, 1080i, and 30fps (which I thought is the closest among all the presets available). And I DID NOT select the "force these settings" option. I assumed, when I add my video file, PE 11 would automatically select the right settings for that video. What might the cause for poor rendering? And how can I fix it? Thank you for the help in advance.

If your video clip is the first one on the timeline and you didn't force settings on your project, the program should set up your project automatically.
So you could be seeing a couple of things:
1) Your Monitor panel may not be displaying the file at high-quality. You can ensure that it is by right-clicking on the Monitor panel and setting it to high-quality and making sure that you're not looking at your video at over 100% size.
2) It could be that your file needs rendered, in which case you'll see a yellow line above your clips on the timeline in Expert view. To render your timeline, press Enter or click on the Render button. This should improve your playback.

Adobe Premiere Elements 8 and Window7 Ultimate 64 bit

hello,
sorry i can't not english. I have a problem.
I have install windows7 ultimate 64 bit and adobe premiere elements 8. When closed adobe premiere elemts 8 won't the prozess in the taskmanager closed. When closed ape8 reserved this programm in the taskmanger under prozesse and cpu 13% and not close.
I can't starting this programm but to about. This prozess to release manually ( prozess closed in the taskmanager ).
When Prozess aborted starting ths Programm as usual.
Thanking you in anticipation.
Sorry for my english

I have my PE8 installed to other patition.
First, PrE (all versions) want to be installed on the C:\ [System Drive]. Other locations can cause major problems.
Now, how many physical HDD (Hard Disk Drives) does your system have? How many of these are partitioned?
The reason that I ask it that a partition, especially if it's your system drive HDD 0, can cause major slowdowns. The reason for this is that the OS "thinks" that it is dealing with 2 physical HDD's. It is not. It is dealing with one physical HDD, that is partitioned. The OS will ask for things from what it thinks is 2 physical HDD's at the same time. Unfortunately, the one physical HDD cannot be in two places at a time - something has to give and performance is how it will give. This will be a bottleneck, as the OS waits for that single HDD to get the data, or write that data. Often, the OS will crash waiting for the data to be read, or written, or maybe the program will.
Partitions are bad. The only reason for them is if one has a dual-boot system, with a different OS on each, and the appropriate programs on each. Even here, I would strongly recommend hot-swappable boot drives, where you just plug in your Win7, or you Linux, depending on what you wish to do.
Good luck,
Hunt

Adobe Premiere Elements 7.0 Files in video rendering misplaced.

I wasen't sure where to post this, but i'm having trouble with Adobe Premiere Elements 7.0
While editing a video in this program, I can add multiple videos to my hearts content. It looks good. But when I render out my video, no matter what the format, all the videos that I placed are scattered around randomly. Some only a few inches away from where I put it, some alot further. The only file that usually stays where I put it is the first video file I add into the presentation. Has anyone got anything to help solve this? I can't buy any newer versions of this program, As I am currently short for money, so that is not an option, Is there anything to help?

Just thought I'd just clear up a couple things, because I didn't really describe them very well D:
Any video files or pictures I use from any source, wether it be camera, or from the internet, always have the same problem
I use timeline view, as this is the only view that lets me add multiple videos in different layers. The original layer I use (Marked by the white in the picture below) always stays in the same place as I put it, but any other images or videos I resize or replace, get randomly moved about, as you can see in this two images V
My original video file
To the right is what happens to my files when I export them, I've tried multiple formats, but always have the same results D:
Hope this extra info helped, and sorry for the random images used in the project, I just scrapped whatever I could find off my computer and used that

Adobe Premiere Elements 7 files encountering major errors

I have Adobe Premiere Elements 7 and every time I try to edit certain parts of my movie I get major errors. Here's what I've done to try to fix the problem:
gone through some of the troubleshooting tips from adobe.com
uninstalled and reinstalled PE7
did a system restore to several days ago when it was working fine
The movie I am editing is over an hour long, and has a variety of movie clips, pictures, narration, and music. When I press play it works pretty good, but when I want to move the narration around or "clear" a certain clip, it goes crazy!! Here's a few of the error boxes I've seen:
Premiere Elements Debug Event
[..\..\Src\Sequence\TrackItemTrack.cpp-480]
and also this one
[..\..\Src\VideoSegment.cpp-55]
When those come up I can only click "continue" and then it pops up again and again until finally it says that there was an error, it must close down, and it will try to save the project.
This has also come up before the file opens:
Found default catalog. Trying to open the default catalog.
And, when I did the system restore this came up when I opened PE7:
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I have a deadline to meet with this movie, but I can't even edit it closes down on me so much! I have tried opening other PE7 movie files and edit them and they seemed to work fine from the little I did. Could it be that the file itself has something wrong with it? I have had minor problems with PE7 before but nothing as bad as this! I have my movie file saved on the computer hard drive, and two separate external hard drives. I have tried opening the file from all three places but they are all the same.
I am not a computer whiz, but If you need any more info, let me know, and please respond ASAP!!
Thanks!

Well, it's not working again. Here's what happened:
I opened that other file this morning, like I told you. I edited for a few hours, then I added a picture, then tried moving some clips that were grouped together, but instead of moving them it did something else (not sure what) and then it said there was an error and it had to close down (I was able to delete the picture off the timeline, just in case that was causing the problem, which I don't think it was). I was glad to have gotten so much editing in, but really disappointed it wasn't fixed completely like I'd hoped. So I opened PE7 again and it said I needed to save the file as another name. So I did that and kept editing for another few hours, with no major problems. Then, when I was moving something around again there was an error message and it closed down. At this point I was thinking "This isn't good, but hopefully it will open again and work like last time." But no, this time, the file wouldn't even OPEN!! This is the worst it's been. Those same error messages come up (PE Debug Event) and a new one too:
Microsoft Visual C ++ Runtime Library
Runtime Error
Program: ...\AdobePremiereElements7.0\AdobePremiereElements.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I've been having a few minor problems with Windows Vista as well, such as the scroll bar on the Internet going up and down like crazy for several seconds, and also a runtime error (similar to the one above) when I open a folder under my computer. Could it be I have a virus? I have Vipre antivirus installed on my computer so hopefully that is taking care of anything like that.
I can open a copy of the movie file I made earlier today (but I'm not sure yet if I can edit with it or not - I don't want to make a bunch of changes and lose my work!), but not the latest file I worked on that had the last problems. Here are my project presets:
(this forum won't let me copy and paste!)
General
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Video:
Frame size 720 horiz. 480 vert. 16:9
Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9 (1.2)
Fields: Lower Field First
Display format: 30 fps Drop-Frame Timecode
Audio:
Sample rate: 48000Hz
Display format: audio samples
Capture format: DV capture
Video Rendering
Maximum bit depth (not checked)
Previews:
File Format: DV NTSC
Compressor: DV NTSC
Color Depth: millions of colors
Optimize stills (checked)
The narration is a .wav file,
the pictures are .jpg
the videos are all .avi (some were conformed from .MTS to.avi with PE7 under SHARE)
By "assets, stills, video etc. on the timeline" do you mean I should tell you everything I have on the timeline in order? Or did you mean something else? I was a little confused by that (I'm a visual person and so new to this!).
Thanks so much for your help!!

Sorry, a serious error has occured that requires Adobe Premiere elements to shut down. We wil attempt to save your current project. This error occures when Im adding a .mov movie.

Hello everybody
I have a new laptop and when I want to add a .mov movie to Adobe premiere elements, this error occures. Im trying to solve this problem now for days but I dont know how to continue. Im working with Windows XP, Version 2002, T2250, 0.99 RAM and an old Premiere elements 2004 version.
On my old computer I was able to add this same .mov movies, but not on the new one.
I also tried to convert this .mov movies, but the quality was to bad...
Does anybody know this problem? Im appreciating every little advice and help.
Thanks a lot
Sabine

Sabine
Sorry for all the delays getting your thread moving forward. I suspect that it got lost in the daily thread traffic and Adobe's major updating of the forums.
Do your issues still exist. If they are the same as when you posted on May 8th, then
1. When you used HandBrake for the converslion of your .mov file, did you leave the Container = Mp4. And under Video Tab, did you set the Videc Codec = H.264 (x264)? All you needed to do at that point was dot the Constant for the frame rate and designate a frame rate and select the Start button and wait for the Queue Finished message in the progress bar at the bottom left of the HandBrake workspace.
2. What model iPhone is the video coming from? Your iPhone is probably giving you HD video (probably 1080p). So increasing the computer's installed RAM from 2.00 to 4 GB would be expected to help the overall workflow. Only if you have a 64 bit computer operating system, 8 GB installed would be even better. The 4 GB installed RAM is the maximum supported by a 32 bit computer operating system.
3. Specially for
The movie is stopping and jumping.
When you are playing back the Timeline content, are you looking at the "rendered Timeline"? Is there an red line over the content during that playback? If so, press the Enter key and wait for the render process to complete. This rendering process gives you the best possible preview of what you are seeing. The red line could be due to your editing the content, or it could be due to an incorrect selection of project settings. If you supply information about your video properties, we can suggest the best possible project settings. I do not recall seeing that you mentioned what version of Premiere Elements that you are using 1, 2, 3, 4 or other?
Please review the above and then let me know what supplemental information and/or clarification would help.
Thank you.
ATR

Adobe Premiere Elements crashes on export

Hello,
I am working on a video project in Adobe Premiere Elements 4.0. My computer is a Windows Vista Ultimate 32-bit Dell XPS M1530 laptop with the following hardware:
Toshiba MK3263GSX Disk Drive
285 GB, 149 GB used
burst transfer rate: 3 MBps
5400 RPM
8 MB cache
Intel Core 2 Duo CPU T8300
2.40 GHz
4.00 GB of RAM
Whenever I try to export my project (which is less than 3 minutes long and contains no more than 2.25 GB of 720p 30fps video), the program crashes. Usually, the progress bar will go about half way before an Adobe message tells me that Premiere is running low on system memory. Not long after that, a Windows message appears telling me that "Adobe Premiere Elements has stopped working" and it crashes to the desktop. This has occured without fail perhaps 50 times in all my tries to get this to save.
As this project has progressed and become larger and larger, it has become more and more difficult to export. At first, there were no problems. Then, I had to start restarting the program or my computer immediately before exporting. After making a few more changes and additions, I have been entirely unable to export succesfully.
I have set my export settings at far lower levels than would be acceptable for this project, but the program still crashes. I was most recently trying to save the file as an .mpg with the NSTC Widescreen DVD settings. Trying to save in other file formats and at other settings has not been succesful.
I do realize that this is probably a commonly asked question, so I apoligize for bringing it up again. I have searched for information on this topic and have tried several suggestions, including changing the virtual memory and cleaning up my hard drive.
Is my computer just too weak to export this project? Would a more recent program fix my problem? Are there any techniques or suggestions I should try?
Thank you very much for your help.

>chose setting NTSC HDV
According to Kodak http://store.kodak.com/store/ekconsus/en_US/pd/Zi8_Pocket_Video_Camera/productID.156585800 you are not selecting the correct setting... that camera does not use HDV
If the forum search is working today, search on
kodak zi8
to find out what you should be doing

Adobe Premiere Elements 10 And Flip MinoHD Generation III Compatibility

I am considering buying Adobe Premiere Elements 10 to edit my videos and I want to know if it is compatible with the video from the Flip Mino HD Generation III camera?

Okay, I think I have found what you are asking:
LCD screen - 2"
Resolution - diagonal 320x240
Type - Transflective TFT (for bright daylight)
Video Quality And Performance
Resolution - 1280 x 720
Sensor - 1/4.5 inch, 1.6 megapixel CMOS sensor (2.2 x 2.2 µm square pixels)
Light Sensitivity - Ultra low-light sensitivity (>1.4 V/lux-sec) with automatic low light detection
Frame Rate - 50/60 frames per second (constant frame rate, progressive scan)
Average Bit Rate - Variable, 8.8 Megabits on average
Video Format - MP4 file format
White Balance and Exposure - Automatic white balance and black level calibration & Automatic exposure control with dynamic exposure compensation
OPTICS
Lens Type - Fixed Focus (1.5m to infinity)
Apeture - f/2.4 (fast lens for great results in low-light environments)
Zoom - Smooth multi-step 2x digital
BATTERY
Type - Sealed internal Li-Ion rechargeable battery (3.7 Volt, 1300 mAh) – Rechargeable through USB
LIfe - Up to 2 hrs of use between charges
There's more if this isn't enough. LOLOL :-D
TY for helping, Bill.

Adobe premiere elements 11 rendering at lower bit rate than i select

Similar Messages

Maybe you are looking for