Adobe Premiere Elements does not open after installation

Hello,
I have written before last week. I have bought Adobe Photoshop Elements 11 and Adobe Premiere Elements 11.
I had a trial version of Photoshop Elements 11 and with the code I could access the full version.
However Premiere Elements did not open after installation. I did not had a trial version so I first downloaded the full program. I went through the whole installation process and everything seemed ok, no error messages. But when I tried to open Adobe Premiere Elements after restarting the computer it did not open at all. Nothing happened.
I have de-installed and re-installed the program for a couple of times over and over again but with not result. Also tried to download the trial version first and also this didn't work. I checked my Quicktime and updated to the latest version.
I use a Windows laptop: Asus Intel Core i5-2430M, 2,4 GHz
I hope you can help me out!
Thanks!
Inge

Yes I saw it but PSE (refers to Photo Shop Elements??) and I have trouble with Premiere Elements..(so the video program)
The Photoshop Elements worked.
I am not sure what to do here also the link at your reply "working with your operation system tools" didn't work..(got the "broken link error")
thanks
Inge

Similar Messages

Adobe premiere Elements does not find my Sony HDR-CX160

When I try to use my Hi-DEF Sony HDR-CX160 video camera, Adobe premiere Elements 10 does not "find" the camera. Why not?
Dan Eller

When you do use Windows Explorer (or Mac Finder, I think... I don't have a Mac... and you did not say) to copy the files from the camera to your hard drive, do as it says in http://forums.adobe.com/thread/1015001?tstart=0 so you don't lose the metadata
Also, Hunt's article on how to design your project http://forums.adobe.com/thread/919388?tstart=0 so you stay organized

Getting the message Adobe Premiere Elements could not start after silent install

I am getting the following message after running a silent command line installtion. The coomand line I am using is
setup.exe" /S /UL1033 /V"/qn COUNTRY=244 SERIALNUMBER="xxxx-xxxx-xxxx-xxxx-xxxx-xxxx" the x64 on Windows 7 64-bit.
After manually running the set-up.exe installer located in the ElementsSTIInstaller folder, Premiere elements launchs.
What is the cause of the error after running a silent installion?
JmFrx

Hi jam62m,
Please follow the steps mentioned in kb article : http://helpx.adobe.com/premiere-elements/kb/silent-install-instructions-premiere-elements- 4.html
and command to install Premiere elements silently is : start/wait OEM.exe /UL%LangCode% /V“SERIALNUMBER=%Adobe volume license serial number%”
Example : C:\ Adobe Premiere Elements 10/Adobe Premiere Elements 10 - 64 Bit> start/wait OEM.exe /UL1033 /V"SERIALNUMBER=1111-1111-1111-1111-1111-1111"
Regards,
Jatin Dembla

Photoshop and Premiere elements 8 not working after installation

I installed the Premiere Elements 8 and Photoshop Elements 8 on a Sony Vaio with a ATI Mobility Radeon HD 4650 graphics card. I can't get a new project to start in the Premiere Elements 8 program to make a DVD. Can anyone help with this?

I spent an entire afternoon with someone at tech support, this person was very patient and nice, but the last thing they suggested was to uninstall and reinstall the program. I did this and still have the same problem. We even went so far as to share screens as I walked throught he problem and still had no results. I am about to ask for a refund of my money if this can't be fixed.

After installing Adobe Version X Pro, I still cannot "create" a PDF package from Excel since the Adobe add-in does not appear after installation. Can someone provide their inputs?

I'm having issues with getting the Adobe add-in to appear after installing Adobe Version X. Version XI works but it is not compatible with another software my company uses so we have to stick with Version X. Please help.

Make sure your Acrobat X is up to date. 10.0 will not do this, 10.1 is supposed to. Compatible web browsers and PDFMaker applications

DTM does not open after installation on VISTA

I am a new BB user, have tried installing the DTM on my HP Machine which has a vista home basic version of windows. I am sure ist a vista problem since it works well with another machine where windows 7 is installed.
the installation has no problems , it all goes thru perfectly. When i try to run the dtm software it says " BlackBerry Desktop Software has stopped working" and then closes down.
Please help with a solution
Thanks

Hey anilsagarwal,
Welcome to the BlackBerry Support Community Forums.
If you try to open the BlackBerry Desktop Software using a different user does the issue persist?
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

When I click PDF file, the file does not open and installation software for creative suite automatically begin to start. Even after re-installation of creative suite 5.5, only acrobat reader dose not work and the same phenomena occurs.

Did you ever install Acrobat? It is not installed automatically with CS, but requires an extra installation step.

Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?

Hello,
How can I fix this problem?
Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?
Thanks in advence,
FL

FLOureiro
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
For your immediate issue, have you update the Online Services in preferences?
Where are you in the program when you get the message "Not possible to initialize on-line services".
Are you in a country outside of the USA?
There certain online services that are just not available outside the USA.
Please review and consider and then, based on your details, we will consider what next.
Thank you.
ATR

PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?

PS Elements 10 preinstalled on my new computer with Windows 8. It worked fine for a week, now opens once, then won't open again, or doesn't open at all. Adobe gives no support to fix this (they told me to research the answer on their site), yet their info says PS 10 and Windows 8 are compatible. Automatic troubleshooter gives non-compatibility message. Can this be fixed? Have spent many hours trying to figure this out. Uninstalled and reinstalled. Nothing works so far.

Thank you for your help. I tried ctrl-alt-shift, and it worked a few times, but not every time. After trying your suggested fix, here's what I've since found that works - so far - today.Open Task ManagerClose PS Elements 10Close Task ManagerLaunch PS Elements 10 Please keep in mind that I was closing the program the usual way (from the program) all along. I used an older version of PS Elements for years on my old computer (Windows XP), and never had a problem launching or closing the software. This problem came about on a new computer with PS Elements 10 and Windows 8. No other versions of PS Elements were installed on the new computer, nor were any settings brought over from the old computer. Again, thanks for your input. Will keep your suggestion in mind for any future troubles with Adobe products.
A Digiovanni
Date: Fri, 11 Jan 2013 00:51:43 -0700
From: [email protected]
To: [email protected]
Subject: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    Re: PS10 Elements does not open in Windows 8, or opens only once. Can it be fixed?
    created by c.pfaffenbichler in Photoshop for Beginners - View the full discussion
Good day! You may want to post on the Photoshop Elements Forum. http://forums.adobe.com/community/photoshop_elements In general trashing the Preferences (by keeping command-alt-shift/ctrl-alt-shift pressed while starting the application) can be helpful with malfunctions in many Adobe applications. Regards, Pfaffenbichler
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4985553#4985553
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4985553#4985553
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4985553#4985553. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop for Beginners by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Digital Editions 4.0 will not open after installation on Windows XP laptop.

Digital Editions 4.0 will not open after installation on Windows XP laptop. DigitalEditions 3.0 installs and opens fine. Have tried 4.0 several times. Removed 3.0 and 4.0, reboot, reinstall 4.0 still will not open. Error message says Windows has experienced and problem and requires that Digital Editions must be shut down.

Solved my own problem. It was necessary to delete all instances of Adobe Digital Editions in programs and the registry. After doing so and reinstalling 4.02...., it became available in the "open with" dialogue box and became the default epub reader.

Why when i run magic bullet with adobe premiere CS5 then adobe premiere CS5 does not run ?

Hi there,
I would like to ask you why when i am using magic bullet and then i am going to open the premiere CS5 , then the adobe premiere CS5 does not run ?

First of all , I would like to thank you for the help.
Secondly , I would like to inform you that I used to have the Adobe CS4 but one friend of mine change it into CS5 , but nothing worked properly after it. e
I download the Adobe CS5.5 Master Collection (as trial) from the official site of the Adobe. Then , I download the MB http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/226/ from here but when i am going to use the filters , one X shows on the screen and i cant work... Any help ?

Adobe premiere elements 9 not editing

This is my second attempt to post (my last one a little while ago didn't appear).
I have bought the above package mainly to edit some club videos. It is driving me mad.
I have a Sony Viao
Vista Home Premium
Service pack 2
Intel Core DUO CPU
2.00 GB Ram
32-bit
I have imported a video from my comcorder to the PC via ION EZ Converter. The video is stored as a .mpg file.
When I open up organiser the thumbnail is there.
The first time I opened organiser I somehow managed to drag the video to the left side of the screen and got a timeline but when I started it up I got sound but no picture. However, now when I open up organiser and go into EDIT, aand try to drag across I get automatically sent into video effects and can't go back!
I was told that the problem may be due to incorrect codecs and I have downloaded K-LITE MEGA Codec but that doesn't seem to have helped.
Before I did this I also got a message in elements
"we have detected an incompatible display driver. To get a better and faster playback performance please update your display driver.
Display driver details: NVIDIA Corporation - GeForce 8400M G7/PCI/SSE2 2.1.1"
Help
Really frustrated
Graham WT

Thanks Barbara
I found it also and I''ve put an entry there too.
Graham
Date: Tue, 18 Jan 2011 16:42:16 -0700
From: [email protected]
To: [email protected]
Subject: Adobe premiere elements 9 not editing
Hi, Graham WT. Sorry you're having trouble. You know, Premiere Elements has its own forum, and the video mavens mostly hang out there:
http://forums.adobe.com/community/premiere_elements
You'll probably get more help with this if you post over there, where more people are working with video. Good luck!
>

While installing Adobe Premiere Elements 10 for Mac my installation encountered errors.

While installing Adobe Premiere Elements 10 for Mac my installation encountered errors. Got about 42% and then crashed with an Exit error Code 7.
The summary says:
DW036: Payload cannot be installed due to dependent operation failure.
I have screengrabs:

This is the correct forum http://forums.adobe.com/community/premiere_elements
And, some information to help with install problems
http://www.adobe.com/support/contact
In the US - Adobe General support 800-833-6687 M-F 5am-7pm Pacific
In the US - Adobe Install Problems 800-642-3623
In the US - Adobe Activation 866-772-3623 Open 24/7
and
New forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Chat http://www.adobe.com/support/download-install/supportinfo/
When you get to the correct forum, provide more information about your computer
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Photoshop elements does not open, says "gathering user info...."

photoshop elements does not open, says "gathering user info...."

Hi,
Please try couple of probable solutions as mentioned below:
Solution 1:
1. Close Elements.
2. Launch the Photoshop Elements Welcome Screen and hold down ctrl + alt + shift as you click Editor.
3. Continue to hold the keys until you see a message box asking if you want to delete Photoshop Elements settings file; click Yes. Elements will open with default preferences.
Solution 2: In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
Solution 3: Try launching with anti-virus off or removing PSE from conflicting list.
Solution 4:
On the drive on which you have installed PSE,on my machine it is on C:
Go to C:\Program Files\Adobe\Photoshop Elements 9\Locales\<locale>\Plug-Ins\Import-Exportand you will find twain plug-in. Remove that plug-in from that location and copy it somewhere else.
Now launch PSE and check if it works.
Solution 5: Try with admin account or right click and select run as admin. or try directly from .exe
For related post for Twain please see this:http://forums.adobe.com/message/2954743#2954743
Thanks,
Garry

Adobe Premiere Elements does not open after installation

Similar Messages

Maybe you are looking for