Adobe Reader not working after update to version XI

I have had Adbobe Reader installed on my PC for ages and have been using this to view my PDF files without any issues. However, Adobe Reader updated automatically to version XI a few days ago. Since then, I have been completely unable to open Adobe Reader at all. The screen does not load up fully with only the top menu bar visible and the remainder a blank grey screen with all menu options inactive or greyed out, and sometimes crashes and closes automatically after a few seconds. I am unable to view any PDF file, even those which I previous viewed with no issues. I have tried running the Adober Cleaner tool but this has not helped. I have tried uninstalling and reinstalling Adobe Reader numerous times with no success. I have also tried reinstalling previous versions of Adober Reader but have idential issues with these too. I have tried checking system compatability using the troubleshooter tool but this appears to be fine, and have also tried disactivating my AntiVirus/firewall software (Norton 360). I am running a Windows 7 operating system in English (UK). Any help gratefully received as Adobe will not offer telephone assistance as this is freeware! Thanks in advance.

You may have given up by now.. I just hope this advice helps some other user..
Have encountered this isssue several times..
several points I will note: of the machines I have worked on to date: only 1 did not have malware, all thus far have been 64bit Win7 and it seems after update to Reader 11.03..
but each so far I have:
- Checked for and removed any malware and or strange BHO's and Toolbars
- cleared all temp files including temporary internet
- removed Adobe reader and ANY OTHER PDF READER and reinstalled Adobe reader
- Checked that PDF's are associating with Adobe reader (sounds silly )
- Started the PC in Safe Mode - check reader works
                                             - Disabled Protected Mode in preferences: then disabled antivirus, along with most startup services and applications
                                             - restarted in normal mode - Check PDF opens normally: 100% of time for me it worked
                                             - re-enabled the anti-virus - restarted PC and rechecked
                                             - re-enable services and applications by group - restart and retest
So far that is all that I have needed to do.
All the best
Message was edited by: Glenn Hurse - missed the Disable Protected mode step.. lazy typist

Similar Messages

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

Adobe Reader Not Working after OS 2 UPGRADE

Hope someone can help with this issue. Updated to OS 2, but now the Adobe Reader does not work. Since this was a new device and the upgrade started automatically, I have no idea if Adobe Reader worked in the previous OS version - from the forums, it seem to work. The shortcut icon is still there but when you click on it, Adobe Reader opens but is non-functional. Clicking on a PDF does nothing. I then tried to uninstall it in My World in Blackberry World Apps. In the Installed section, it shows Adobe Reader as being installed but I noticed that the Delete button was greyed out so I could not uninstall it for a reinstall.
It was interesting to note that when I tried to find Adobe Reader in BB World Apps, there was no listing for Adobe Reader.
Does anyone else have the same issue? Hopefully there is a solution for this problem. Is there another alternative app to Adobe Reader? Thanks.

Here is a quick test if to check if your Adobe Reader is currently working properly within its current confinement. Open the app and click on ‘Browse’.
If you can browse around, the app is working properly. If you can’t, close Adobe and then open it once more and try to browse.
If you still can’t browse it is time to ‘Restart’ your PB via the battery icon’s ‘Restart’ option.
Once your PB’s main screen loaded again repeat the test. I am sure you can browse now but don’t open a file yet. We need a ‘known’ conforming PDF file.
Now, this might be a bit of a surprise. Not all PDF files are created equally. Therefore, some PDF files can’t be opened by this Adobe Reader’s version without ‘hanging’ the app as indicated by ’not able to browse anymore’.
Please, download a conforming PDF file like the manual for the Playbook and select ‘Download PDF’ from this BB site:
http://docs.blackberry.com/en/smartphone_users/deliverables/27018/index.jsp?name=User+Guide+-+BlackB...
Now open Adobe and select the newly downloaded file: “BlackBerry_Playbook_Tablet_User_Guide—“and it should open all 86 pages. Scroll around. This 2nd test verifies that your Adobe Reader is working because this file was created to follow the Microsoft – Adobe agreed upon standard which the PB is following.
So at this point in time we users have to except that some files are non-conforming and that Adobe Reader version 10.0.3 needs an update. BTW, I couldn’t find Adobe’s security setting in my PB either (this is not a 'fix' for OS 2 users).
Remember, Adobe cannot open files directly if you browse to your smartphone’s Adobe documents even so they might be ‘conforming’. You have to open these files first via File Manager (found on your main screen) so Adobe gets a trusted link which it stores in its hidden “Recent Document' folder. I guess, this link then allows Adobe to open conforming files which are stored in your smartphone the next time you open this linked Adobef PDF file without the help of the File Manager.
Your question: Is there another alternative app to Adobe Reader? Contributor sohrabza suggested to use an Android app called ‘Repligo’. I looked a bit into this and it is not yet a downloadable PB app unless you know how to a handle a bar file installation in your Playbook together with their Android version. They also make a Repligo version for the BB smartphone so they know RIM. I can’t believe cerience has not readied the Playbook App store download version to get my $4.99. Many users might want to choose this alternative PDF reader once it is available in the BB AppStore but their website does not give a hint if their app approval is pending with RIM.
Click the ‘+’ sign button in this comment box if you liked the comment so others can see your feedback.

WLAN Sync does not work after Update to version 10.5.1

Today I have updated my iTunes to version 10.5.1.
Before the update my iPhone was showed under Devices in iTunes and I could start the WLAN Sync directly from iTunes.
After the update my iPhone is only showed when I connect it via the USB-Cable. I can't sync via WLAN.
I've got an iPhone 4 with iOS 5.0.1 and a MacBook Pro with Mac OS X 10.7.2.
Can someone help me?

I am having similar trouble. My Apple TV (first generation), and both my iPhone 4 and my wife's 3GS are missing from the device menu. The "Sync via Wi-Fi" boxes are checked and all devices can see the network. I looked at my router's (using the cheap actiontec supplied by Verizon FIOS for the past year) settings and they seem to be OK.
Any help would be great.

Adobe Indesign not working after update to Yosemite?

Can anyone help with this issue?

Google can be your friend:
How to Clean Install OS X Yosemite - OS X Daily
How to Do a Clean Install of OS X Yosemite - Mashable

Click to activate does not work after update

Click to activate plugin does not work after updating to version 23.0.1

hello Kamullia, if you have set click-to-play to true in about:config you can now go to the ''addons-manager > plugins'' section and set the permissions individually for each plugin type.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Nano quit working after update to version 1.2

Brand new nano quit working after update to version 1.2 It worked fine before. My computer see usb storage device but doesn't recognise ipod. ipod updater that worked to let me update doesnt regonise nano either. I returned to store where I bought it, got a new one, brought it home, ran updater again now it the new one is doing the same thing. What gives? I have never had a problem in the past with updater. Is there any way to take it back to version 1.1 since 1.2 doesn't work?

This fix came from Caspar (Thank you SOOO much!). It took me 10 minutes to do this and now my beloved ipod nano is back! Hopefully this will help some of you:
Original Problem: Updated iTunes(6.0.5) and iPod nano (1.2). After the update, iTunes would not recognize my iPod and therefore would not let me remove the iPod from my computer, which seems to be the problem most people are having.
The Fix:
*uninstall iTunes, iPod, and any updates (make sure anything related to these two programs are not on your computer)
*Open Control Panel
*Click the "switch to classic view" link, if
necessary
*Double click "administrative tools"
*Double click "computer management"
*Under "storage" click on "disk management"
*Find your iPod's listing
*Right-click on it and click "format"
*Select "FAT32" and start the format
*After reformatting, remove iPod from computer
*Download iTunes directly from the Apple website (I didn't restart my computer at the prompt)
*Download 6/28/06 update for iPod (do NOT plug iPod in before doing this!)
*Open update for iPod and wait until prompt to plug iPod in (do not plug in early)
*Wait for the update....and there ya have it!!
Hopefully this will help some people, as I have spent the past 2 weeks doing the 5R's thing. After completing the steps above, I haven't had a problem with my iPod..and now my Nike+ works!! Thanks again, Caspar...you're a genius!!
p.s. if this helps, please repost this message to others who have the same problem as we do...

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

Iphone 4 personal Hotspot not working after update to IOS 7.1 India BSNL cellular

BSNL is not a supported carrier. Personal Hotspot requires carrier support and provisioning of the account to enable it. iOS 7.1 disabled the ability to manually configure Personal Hotspot on unsupported carriers.

HT1688 My Hot Spot does not work after update to 6.0.1. Service is with ATT. Apple says problem is with ATT, ATT says problem is with Apple. Anyone else having this problem?

My Hot Spot does not work after update to 6.0.1. Any suggestions?

Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

Iphone 4s Cellular data not working after updating to ios 6.0 .

How to fix my cellular data, is not working after updating to IOS 6.0 ?

Hey my wifi quit about a month ago, and im running 5.1.1. I thought the fix would be to download 6.0, I guess not
I have a 4s, first it was charging problems now this...argh!

My iMessage and facetime is not working after updating to ios 7... My ipad works perfectly and it's the same apple id. Any answers or reasons why on the iPhone 5 is not working???

My iMessage and facetime is not working after updating to ios 7...
Any answers on how to fix it? I've tried to restart, restore connected to itunes, but nothing.

ACTIVATING FACETIME AND IMESSAGES
Activating Facetime and Imessages on your phone requires the ability to send SMS messages and depending upon where you are that might be an international SMS. Check with your carrier to see if your plan supports sending of international SMS messages. If you are having trouble activating Facetime or Imessages turn them both off on your device and reset the device (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost)). Wait for the device to restart and wait a minute and turn Facetime and imessage back on and wait for activation. If that does not fix things read the following articles:
http://support.apple.com/kb/TS4268
http://support.apple.com/kb/ts3367

Adobe Reader not working after update to version XI

Similar Messages

Maybe you are looking for