Adobe Reader Updater - Error 1402. Could not open key:

Adobe Reader Updater, error 1402, could not open key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opt
I might have accidently discontinue. Can any body help me????

Hi,
It  looks like you do not have access to the registry key mentioned i.e.  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current  Version\Run\Optional Components\IMAIL.
This might be due to  the fact that you may not be added to the Administrators group or the  registry key has been denied access explicitly to a group that you may  be part of.
People in my network setup were facing the same issue,  and we fixed the same using Microsoft's "subinacl" tool. You can follow  the below mentioned steps to rectify your issue as well:
1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
2. Install the same by double clicking on the "subinacl.msi" just downloaded.
3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
4. In the Command Prompt window, type in the following commands:
    i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
   ii. subinacl  /subkeyreg  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f  /grant="Creator Owner"=f (Hit Enter)
You  should see some processes happening on your screen. After the process  ends, retry the update operation you were originally trying to perform.  Hopefully, it should succeed now.

Similar Messages

  • Error 1402: Could not open key: HKEY_LOCAL​_MACHINE..​. During Installati​on

    Hello,
    When I try to install LabView (v7.1 or v8.0) I get the following error:
    "Error 1402: Could not open key:
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\LVDB.Applicati​on\CLSID. Verify that
    you have sufficient access to that key, or contact your support
    personnel."
    I have full administrator privileges on my computer and I am able to
    modify that key manually using the registry editor. When I click the
    "Yes" button to continue the installation it will complete but then
    when I launch LabView I get the following error:
    "The requested feature is unavailable on "localhost"".
    Can you help me get LabView up and running?
    Thanks,

    The Adobe knowledgebase article actually pointed me in the right
    direction and I was able to solve the issue. Thanks to all who gave
    advise, you guys are the reason these forums work!
    The error message was actually coming from the Microsoft Installer, not
    from anything related to National Instruments. Also, ironically, what
    the message said was spot on with one exception, while I personally had
    access to the registry key, the installer didn’t. What I ended up doing
    was going into the registry using regedit and setting the permissions
    on the key in questions such that “Everyone” had full access. After
    that I uninstalled LabView then reinstalled and it worked fine this
    time. The step by step follows:
    1) Open the registry editor by selecting "Run" from the start menu and then typing in "regedit".
    2) Browse through the registry and select the entry mentioned in the error message.
    3) Choose "Permissions..." from either the edit menu or by right-clicking on the registry key's parent directory.
    4) Click the "Advanced" button to add a new user.
    5) Type in "Everyone" as the new user and click OK (it may not be
    necessary to give everyone full control but this is what I did and it
    worked).
    6) Configure the permissions for user "Everyone" to "Full Control"
    7) Uninstall LabView (if necessary) and re-install.
    Best regards,
    -Ben

  • Error 1402.could not open key:UNKNOWN\MPAPI.WAPCON...

    im getting this error message when i install pc suite v6.82 on windows XP. any ideas
    error 1402.could not open key:UNKNOWN\MPAPI.WAPCONNServerMP.4\CLSID. Verify that you have sufficient access to that key, or contact support personel....
    thanks in adv..

    It sounds that there is some permission problems in your register.
    Anyway, if you ignore that error message, does installation continue?

  • Quicktime Error 1402 Could not open key (defaulticon)

    When trying to install Quicktime 7 (standalone) I get the same error I have seen posted by so many others....Error 1402 Could not open key....
    HKEY LOCAL MACHINE\SOFTWARE\CLASSES\QUICKTIME.QT\DEFAULTICON
    I have tried every suggestion by Apple, Microsoft, the discussion fourm, and everything I have found via a Google search.
    When I use regedit to view the permissions for the Quicktime.qt folder (it's not expandable so I can't locate a defaultIcon folder), I can add new users (everyone) and give them full permissions but when I select OK I get a message that says "Unable to save permissions on quicktime.qt...Access is denied).
    (I am the only computer user and I am using the administrator account).
    Note XP home addition.
    Thanks
    Anybody have any (new) ideas??????????

    What happens when you delete the registry key or all the keys associated with QT?
    This Microsoft article though claiming not to be for XP or 2000, has something interesting to say under Cause.
    http://support.microsoft.com/kb/303089/en-us
    After removing any program I clear out the registry of left over keys from it. Just something I do. I find I can still miss some. This program Windows XP Manager is very good at finding what I miss, and can also defrag the registry. It will also back up the registry for you also. You might want to take a look at it, where you problem seems to stem from the registry.
    http://www.winxp-manager.com/xpmanager/index.html
    Scroll down to Cleaner in the link on XP Manager, it explains what it does in the registry.

  • Error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid

    Hi,
    I've got the following error during the installation of labview 7.0 student edition on my PC that works with XP.
    The error is :
    "error 1402 could not open key: unknown\graph3dctrl.graph3dctrlproxy\clsid verify that you have sufficient access to that key"
    I have the administrator right on my PC and I seek the key on registry and it doesn't exist at all.
    I already have installed successfully  the Labview 6.i student edition. I tried to uninstall all national application and reinstall the labview 7.0 but same error appear.
    My opinion is that the key cannot be opened because it doesn't exist.
    What can I do to install the new labview 7.0?
    Attachments:
    Labview 7 installation error.jpg ‏22 KB

    Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
    Attachments:
    msi.doc ‏32 KB

  • ERROR 1402   Could Not Open Key:

    Having Problems loading QUICKTIME. There was an older version but was deleted a while ago. I have used the Windows Install Clean Up. but still get 'ERROR CODE 1402 COULD NOT OPEN KEY' "HKEYLOCALMACHINE\Software\Microsoft\Windows\Current Version\Uninstall\Quicktime. Verify that you have sufficent access to that key, or contact your support personnel." I have gone to that file, and cannot do anything to that key. PLEASE HELP!!!

    ttt, same problem. please help.

  • I get an Error 1402 Could not open key: and the update fails. How do I fix this problem. Please Help

    ERROR 1402. Could Not Open Key:  HKEY_LOCAL_MAHINE\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\RUN\OPTIONAL COMPONENTS\IMAIL

    You  could try using the Windows Installer Cleanup Utility to remove all traces of any existing versions of Reader prior to installing the version you want and updating it as required.  This utility is no longer supported by Microsoft because it can conflict with Win 7, but you can still find it in sites like http://majorgeeks.com/download.php?det=4459

  • Acrobat Pro won't install: Error 1402: Could not open key on install attempt

    I've been stuck in install hell for the past week. Here's my issue: I have Adobe Creative Suite 3 Design Premium and want to install it on a PC running MS Vista, but when I attempt an install, I cannot install Adobe Acrobat 8.
    Reading the event viewer, I get the following type error:
    Product: Adobe Acrobat 8 Professional -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\CLSID\{8AD0743E-113B-4E26-BA21-1E9A71098F41}\InprocSe rver32. System error 5. Verify that you have sufficient access to that key, or contact your support personnel.
    Here's the problem: I'm basically playing whack-a-mole. Each time I go into regedit to change the registry permission for the named folder and attempt to install again, I get a new error saying that the Adobe install software could not open some other key. Each install attempt takes 15-20 min, and I must have done this 20+ times over the past week.
    I've done all the obvious things like uninstalling everything Adobe (including my browsers Flash plug-in), running the CS3Clean software, running Vista in selective start-up, running setup as an administrator, barking at the moon, ect.
    All the affected permission issues some to reside in the CLSID folder, but there is no way for me to set the permissions there and have them apply to all the subfolders without getting some sort of "whatever, we do what we want" error.
    I'm at my wits end here. I've posted this to the Adobe customer support page, and four days after the supposed 25 hour turn-around, I still have yet to hear from Adobe. Any help would certainly be appreciated.

    i suggest a best way to solve this maan,
    follow this,
    create a new administrator user on your xp,
    log off current user n log on to new admin user,
    install yr program,
    and
    log off this admin user n log on to previous user,
    n continue to use yr installed program
    tahts it
    wave
    cihan

  • Error 1402: Could not open key UNKNOWN\SliderCtrl.SlideCtrlProxy\CLSID

    I have two users.  User A wrote an application using LabVIEW 7.1, including an installer, and gave said application and installer to User B.  User B has 8.0 and 8.1 LabVIEW RTE's installed properly.  When trying to run the application installer, or just the 7.1 RTE installer alone, the following error occurs every time:
    Error 1402.  Could not open key:
    UNKNOWN\SlideCtrl.SlideCtrlProxy\CLSID
    I took the registry info from my machine (had 7.1 installed on it at one time; currently has 8.2 and 8.5), exported everything with "SlideCtrl" in it, imported those into User B's registry, double checked the permission in the appropriate places, re-ran ... same problem.   Help?
    Certified LabVIEW Developer
    NI-VLM Administrator

    I found the answer on my own, documenting for the next poor soul ... this was under WinXP
    * Go into regedt32
    * Right-click on HKCR and select "Permissions" -OR- Click on HKCR and choose Edit->Permissions
    * Add the current user and set permissions for Full Control and Read.
    It is NOT sufficient to give "Everyone" Full Control and Read, it needs that user id.  Brilliant ... current user is not part of "Everyone".
    Certified LabVIEW Developer
    NI-VLM Administrator

  • Error 1402- could not open key....??? wat???

    Y cant i install the itunes software on my windows xp. the error says:
    Error 1402. Could not open key: HKEYLOCALMACHINE\Software\classes\.cdda\OpenWithProgids.
    Verify that you have sufficient accessto that key, or contact your support personnel.
    I have no idea what that means and i have no idea what to do...i jst bought an ipod nano, i used to have an ipod shuffle and the software used to work fine. But one day it stoped working and i could not instal it agen without this error.
    no i Have the updated itunes/ipod nano cd and it still wont install coz of that error...
    PLEASE HELP!

    First goto the control panel>add and remove and remove/uninstall BOTH itunes and qquicktime. DIsable your antivirus and download then reinstall the latest iTUnes from apple.com
    If this does not work for you, goto the PC makers site and download ALL updates especailly patches for iTUnes they offer for your model.
    Still not working, goto this link and follow all the steps they recommend http://docs.info.apple.com/article.html?artnum=93976
    After doing all this it still doesn't install you will have to alter your registry by going to the link below, only do this after trying everything else out http://docs.info.apple.com/article.html?artnum=93865

  • Error 1402: Could not open key ..... IMAIL

    I am trying to install Adobe Reader 9 on a friend's computer.  He desperately needs it to print pdf documents.
    I have tried everything I know, including removing all traces of Adobe from the registry and from the files.  I don't seem to be able to remove the file pdfshell.dll, though.  Every time I download Adobe Reader 9.4 to install it , I get the following error code:
    Error 1402_Could not open key HKLM\Software\Microsoft\Windows\Current Version\Run\OptionalComponents\IMAIL
    Then the system backs out of the operation.
    What can I do?

    Try the solution from this post http://forums.adobe.com/message/3152952#3152952

  • Error 1402 Could not open key HKEY_CURRENT_USER\SOFTWARE\Adobe\Acrobat Reader\9.0\Installer

    Hi all,
    Running Windows 2003 SP2 Terminal Server and receiving this error when trying to uninstall / install adobe reader and acrobat. Originally had Acrobat 8.0.1 and Reader 9.3 installed and users started receiving errors relating to Acrobat. When I tried to uninstall I received the error above.
    I have tried everything I can find on the net and in these forums including:
    Using control panel to uninstall - no deal
    Re-install Acrobat
    Checking / changing registry permissons including checking owner, replacing inherited perms etc
    Deleting and recreating the reg entries
    Using subinacl
    Using Windows Install Cleanup
    Manual removal.
    I now have uninstalled reader (cleanly) and acrobat however I am still receiving this error when trying to reinstall reader. The permissions are correct so im really stuck. If I cant sort this out I will have no option but to build a new TS machine and I really dont want to do that just because Adobe Reader has buggered my registry permissions.
    Any thoughts/ideas greatfully accepted ....

    Have tried as two different domain adinistrators and local admin - same error each time. Resigning myself to rebuilding that terminal server which isnt a quick job - it wont be getting any adobe products installed on it!!

  • Acrobat Updater keeps failing...shows error 1402 (Could not open key).  Why?

    I bought Acrobat Pro XI, but keep getting an error 1402 when trying to update.  Why?

    update manually, Adobe - Acrobat : For Windows
    if that fails with the same error, check if you have more than one installation of acrobat and/or reader causing a problem.

  • Nokia Software Updater -- Error 1402.Could not ope...

     H,
    When I try to install the Software Updater for the first time to update my Nokia 6500c phone, I receive the following error message about 57% during the install process. I checked my permission keys in the registry, and they seem to have all the correct Admin permission.
    Any suggestions? 
    Product: Nokia Software Updater -- Error 1402.Could not open key: HKEY_LOCAL_MACHINE\Software\Classes\Msxml2.DSOControl.4.0\CLSID.  System error 5.  Verify that you have sufficient access to that key, or contact your support personnel.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Thanks.
    Matt

    Hi,
    It  looks like you do not have access to the registry key mentioned i.e.  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current  Version\Run\Optional Components\IMAIL.
    This might be due to  the fact that you may not be added to the Administrators group or the  registry key has been denied access explicitly to a group that you may  be part of.
    People in my network setup were facing the same issue,  and we fixed the same using Microsoft's "subinacl" tool. You can follow  the below mentioned steps to rectify your issue as well:
    1. Download Microsoft's SubinACL tool from http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe -4a91-93cf-ed6985e3927b&displaylang=en
    2. Install the same by double clicking on the "subinacl.msi" just downloaded.
    3. Open Command Prompt window through the Run Dialog Box (Start -> Run and type "cmd" and click OK)
    4. In the Command Prompt window, type in the following commands:
        i. cd /d "%ProgramFiles%\Windows Resource Kits\Tools" (Hit Enter)
       ii. subinacl  /subkeyreg  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\Opti  onalComponents /grant=administrators=f /grant=SYSTEM=f /grant=USERS=f  /grant="Creator Owner"=f (Hit Enter)
    You  should see some processes happening on your screen. After the process  ends, retry the update operation you were originally trying to perform.  Hopefully, it should succeed now.

  • Error Code 1402 Could not open Key

    When I try to run the auto installer I get a message that says.:
    Error 1402.Could not open key:
    UNKNOWN\Components\2A31EAB9FA7E3C blalhblhablah
    BLALBLAHBLAH..............................
    Verify that you have sufficient access to that key, or
    contact your support personnel.
    How do I fix this?

    Hi Chardawg,
    Please try and use the below kb article for resolution.
    Error 1402 | Error 1406 | Acrobat, Reader
    Cheers,
    Kartikay Sharma

Maybe you are looking for

  • How can I do direct ip dialing?

    Hello: Usually I configure the dial peers with the command session target with the remote gw ip address. there is any way to make the call using an ip from the caller endpoint? In each call the user can dial a different ip address and I need that the

  • Include a message-id in database

    Hi, I have created a JDBC to FILE scenario in sap-xi. i just want to put message id in database field corresponding to each records which is picked up by  the jdbc adapter and send it to receiver adpater. Plz help me out. Thanks & regards, Vanita Jai

  • Suddenly my lumia 620 went blank

    I bought nokia lumia three months back, Suddenly my phone went blank, and it's happend 3 times last three months. and then no switch are functioning.only solution is open back pannel and remove battary and reset again, but it'snot fair with nokia. pl

  • Camera raw will not read my cf

    i have been using camera raw for 1 yr. great no problems, my computer crashed and had it reworked at my repair guys. all adobe was removed in the process. i reloaded my same discs from last year, cs4 will not read my canon 5dmark 2 compact flash file

  • Dual sim feature in Nokia Lumia?

    In near future will nokia introduce dual sim features in lumia models