Adobe Viewer Crashing

I have noticed that the Adobe Viewer crashes ALOT, i.e., quits to the home screen. This is not a huge problem during testing, but I am wondering about the performance of built apps and whether or not anyone has noticed the same stability issues. This becomes a concern if the app is to be used during any sort of performance venue, where quitting could cause a serious inconvenience and problem for the presenter/performer. I personally have seen this behavior in some of the folio apps I have downloaded from the App Store, but I haven't used too many to make any or of conclusion.
Specifically with the quitting to the home screen, I have observed this happening upon almost every folio update in the Viewer.
The sequence is: notice that there is a folio update, agree to update, update is downloaded, touch front page icon, Viewer quits to the home screen. This happens 99.9% of the time. I am using an iPad 3. I have tried powering the iPad off, but the same thing happens, even if nothing else is running.
I am running the latest Viewer update (v23 compatible), but experienced the same behavior in the previous iteration.
Any thoughts would be appreciated.

Neil,
Thank you for your attention.
Here's the environment:
- Adobe Content Viewer: v23 (2.8.0.0.59944)
- "Customized Viewer" (ipa): assuming the same (2.8.0.1.59944)
- Folio version: set to the same (v23).
- Testing with: all, iPad1 (32Gb WiFi/3G) + iPad2 (64Gb WiFi/3G) + iPad3 (32Gb WiFi/3G), clean iOS 5.1.1 everywhere, no jailbreaks.
- We use vector (PDF) type articles, MSO and embedded audio/video clips.
- The size: test folio is 108,639,607 bytes, 27 articles. It does not crash even on iPad1. The final test / pre-Production version is 705,428,610 bytes (161 articles). It does crash even on new iPad3.
- There are also intermediate test versions (between 50 and 90 articles, between 200 and 350 MBytes, they also cause crash at 1,2 and new 3 iPad's)
- I remember we had these intermediate versions working on iPad3 and sometimes iPad2 until new Viewer v23 was released. The full version was not ready at that time.
That's it. Any suggestios?

Similar Messages

  • Adobe Viewer Crashes

    I have installed the latest version of the adobe viewer. I downloaded a folio - 685MB but when it finishes the Adobe Viewer crashes and the IPAD screen returns to the screen with all the icons of my apps, then I open again the adobe viewer and it shows that I have to download again the Folio. Please help I have to get the approval of my app with my customer and I dont know what to do. Thanks

    My folio still does not work. I've isolated the problem to one particular layout. When this article is in landscape layout, it causes the Content Viewer to crash. I have no MSO with the same name, and I've checked all the interactive objects and overlays to see what's causing this problem. It worked perfectly before the update to the new Content Viewer and before I updated the tools. The article also works fine in portrait view, and it has the exact same objects and interactivity. This is extremely frustrating, and I could be looking for hours to find what the problem is. Any help would be greatly appreciated.

  • Adobe viewer crashing on ipad

    My DPS presentation quit unexpectedly from the Adobe Viewer app on the ipad.
    I notified that it's happen only in my article that contents a lot of multi-states objects and buttons in the same pages. In 3 pages, I made about 20 buttons creating 20 pop-up window (multi-states objects) and each state has 2 buttons inside. (one linking to a page in the same article an one other to close the pop-up window.) All the fonctions work but then crash after 4 or 5 times activated. Every pop-up window links to a different page in the article. My presentation has about 60 pages. (each contents a link to come back to one of the 3 pages and 2 others to a page in a different article of the folio -navto:// )
    Does my article's page content too much links? Too much buttons?
    Does Adobe Viewer application can support that much interactivity in a same article?
    Are there a maximum pages for an article?
    The format of my article is in PNG, is it better in PDF? Can it be the problem?
    I'm looking for a solution, I have tried a lot of things but each time it's crashing again.
    Thank you or your help!

    Hi Neil,
    Thank you very much for your answer. Finally I found the problem, and it wasn't about the number of links, overlays or buttons. Good news, the Adobe Viewer can support all of them! Maybe iPads are more performant than we expected!
    The problem that caused the inexpectedly quitting was in my overlays. My presentation contents 3 pages as a repertoire of logos that links to a page of description of each of them. With my pop-up windows, I created a mask in transparency that covers all 3 pages by making a rectangle 3times the size of a regular page. Don't know if you understand.. ?! But the point is:  it's not possible to create an overlay that interracts on multiple pages on the same time. The overlays had to be inside the workspace, 1024 X 768px in the iPad's case.
    Also, I tried to import as PDF instead of PNG, but it created a blur when I arrived to the linking page on the article. PNG is probably better.
    Thank you again for your help!!
    JF

  • Viewer crashes when turn ipad orientation

    every time I turn the iPad to change orientation Adobe viewer crashes. It's driving us mad!  It happened before a few times and we kinda get to the conclusion that the problem was  the name of some files or links. Names with spaces or portuguese (brazilians) characters. This aways sorted everything out. But it is just not happening this time. We double checked, triple checked every single article, every linked file, we have deleted articles, up loaded one by one, deleted the whole folio and up loaded again but still going on. Any clues, PLEASE! Dead line to publish it is tomorrow. Thanks

    Just looking at the cover, it is a full-screen image inside a PDF. The text isn't crisp even at 100%, and if I pinch and zoom the page the text isn't resolving into a high-quality version. The same is true for every ad page. It isn't until I get to the editorial content where I see truly vector content.
    The pages that are full-page images and then made into PDF articles are why you are having memory problems. I'm not sure what your production process is, but for those articles you are better off setting those articles to be PNG format instead of PDF (you can mix both article types within the same folio).
    Neil

  • Adobe Content Viewer Crashing

    Is anyone else having a problem with the newest version of Adobe Content Viewer crashing constantly? It crashes all the time for me. Sometimes after I download a folio update and go to view the folio, sometimes when I tap to download the upadte for a folio. I try restarting the app, I try restarting my ipad, nothing seems to make it crash less often. I was just wondering if anyone else is experiencing this and if you've found a solution?
    Thanks!

    Hi Klaasjan, this is really helpful information, since we have actually the problem that the reader is crashing a lot. Not really surprising since we use a MSO (57 states) in a scrollable area, exactly what you wrote to avoid.
    But one question remains, which effects our testing. You said that the articles shouldn't be arranged next to each other, does that mean that the viewer is loading the previous and next article into the memory to speed up the loading time when the user jumps to the next article? Because that would effect our testing, since we have all different versions to test the crashing in one dedicated folio in a row, so we would need to insert a dummy page between all variations, or to you have more specific info on that?
    Thanks, Norbert

  • Downloading froze and Adobe Content Viewer crashed.

    I tried downloading folio data with content viewer on iPad.
    (InDesign Plugin: V18, Content Viewer V2.3)
    But the downloading froze and the content viewer crashed very often.
    I checked the folio data on DPS Dashboard and I think the folio data is OK.
    And the status of Acrobut.com is "The service is available. No issues repoeted." on Acrobat.com Health.
    What's going on?

    Which verison Mac OS are you using? What is the verison of InDesign is being used ? Have you donwloaded all the most recent updates to Folio Producer Tools, Folio Builder, and have the new Viewer Builder since this Monday-Jan 30?
    PRODUCT UPDATES
    Folio Builder panel for InDesign CS5.5
    January 26, 2012
    Windows | Macintosh
    Folio Builder panel for InDesign CS5.0
    January 26, 2012
    Windows | Macintosh
    Folio Producer tools for InDesign CS5.5
    January 17, 2012
    Windows | Macintosh
    Folio Producer tools for InDesign CS5.0
    January 17, 2012
    Windows | Macintosh

  • Adobe 8 crashes when closing doc created from PDDoc.OpenAVDoc

    I am having trouble closing Pdf objects using Acrobat Pro 8xx. The following VBA code has worked successfully with Acrobat 6 & 7, but not with 8. We are using current pc's with Windows XP (latest SP's) and we have just upgraded to Acrobat 8.1.2.
    In VBA I basically insert pages from any combination of PDF books into a new PDF book (using PDDoc.OpenAVDoc(temporary object)). Then I open the completed book for viewing (without first having saved the book). The book opens correctly, but the following error occurs when the document is closed by the user. Acrobat then crashes and needs to be restarted.
    The instruction at "0x03072b95" referenced memory at "0x00000008". The memory could not be "read". This doesn't happen with Acrobat 6 or 7.
    The problem is resolved when I save the book first and then open, but I dont want to do that because these books are temporary and a large amount of books are generated on a daily basis by many users and I dont want to have to clean them up.
    Also there are a couple of reasons why we insert pages from existing books into a temporary book, rather than just opening up the individual books:
    1. Each book is an individual part drawing. The temp book groups the individual part drawings to make a complete part assembly. Each book may have a different combination of parts inserted into it.
    2. Each book (part) is published from a CAD file and sometimes revisions need to be made to an existing part. If the part book was open for viewing when the revised part was published, then the PDF will not be able to overwritten because it is locked for viewing.
    The following is a watered down version of the VBA code that I use. Any suggestions would be appreciated.
    Option Explicit
    Public Sub CreateTempBook()
    Dim oPdfApp As Object
    Dim oPdfPartPdDoc As Object
    Dim oPdfTempPdBk As Object
    Dim sPdfDocPath As String
    Dim iResult As Integer
    sPdfDocPath = "C:\TestPart.pdf"
    Set oPdfApp = CreateObject("AcroExch.App")
    Set oPdfTempPdBk = CreateObject("AcroExch.PDDoc")
    Set oPdfPartPdDoc = CreateObject("AcroExch.PDDoc")
    iResult = oPdfTempPdBk.Create 'Create blank temp book to receive part PDF
    iResult = oPdfPartPdDoc.Open(sPdfDocPath)
    iResult = oPdfTempPdBk.InsertPages(-1, oPdfPartPdDoc, 0, 1, 0) ' Insert part page(s) into Temp book
    oPdfPartPdDoc.Close 'Close Pdf
    If iResult = 0 Then
    oPdfTempPdBk.Close 'Close book as no pages were inserted
    Else
    oPdfTempPdBk.SetPageMode 2 'PDUseThumbs - show Pdf with thumbnail (page) tab
    oPdfTempPdBk.OpenAVDoc ("TempDocName") 'Open the object (to make visible)
    oPdfTempPdBk.ClearFlags (-1) 'Clear flags so no prompt to save shown on close
    oPdfApp.Maximize 1 'Maximize Acrobat
    End If
    Set oPdfApp = Nothing
    Set oPdfPartPdDoc = Nothing
    Set oPdfTempPdBk = Nothing
    End Sub
    Note this message has been relocated from the Acrobat Windows forum.

    PDL,
    Thanks for advice on clearing the save prompt. I now understand the ClearFlags (-1) may not have bene used correctly, but note it did not cause Adobe 6 or 7 to crash.
    Ultimately I am not worried about the user being prompted to save the new document. They can always hit cancel. Removing the save prompt is just tidier.
    I have tried your suggestion, but when I close the oPdfTempPdBk document down in Acrobat I get asked to save the document (the save prompt is shown) and regardless of which selection I make Adobe still crashes. Updated code:
    If iResult = 0 Then
    oPdfTempPdBk.Close 'Close book as no pages were inserted
    Else
    oPdfTempPdBk.SetPageMode 2 'PDUseThumbs - show Pdf with thumbnail (page) tab
    oPdfTempPdBk.OpenAVDoc ("TempDocName") 'Open the object (to make visible)
    Dim oPdfJSObj As Object
    Set oPdfJSObj = oPdfTempPdBk.GetJSObject
    oPdfJSObj.Dirty = False
    oPdfApp.Maximize 1 'Maximize Acrobat
    End If
    I have also removed all reference to making the document clean and setting the Acrobat view, but Acrobat still crashes. Revised code:
    If iResult = 0 Then
    oPdfTempPdBk.Close 'Close book as no pages were inserted
    Else
    oPdfTempPdBk.OpenAVDoc ("TempDocName") 'Open the object (to make visible)
    oPdfApp.Maximize 1 'Maximize Acrobat
    End If
    Any further suggestions would be appreciated.
    Thanks Tony

  • Content Viewer Crashes When Viewing Web Content

    Hi,
    I'm having issues with the folio Content Viewer crashing before web pages fully load  my hyperlinks. I need to proof the folio with the client before we can publish, so I need everything to be working and know that the final app will not have the same issue.
    I've set up buttons that link to coordinates on Google Maps. When a button link is clicked, the web viewer begins to load then immediately disappears (sliding to the bottom of the screen before the web content finishes loading) or crashes the Content Viewer completely.
    I searched the forums and did not really find any solutions, other than when using a lot of images, they need to be sized/sampled down to use less memory. My folio does have a few articles that use quite a few images, so I've sampled everything down to 72dpi and noticed a slight increase in loading speed when loading each article. At first I thought this fixed the issue as the maps were loading for me, but after switching articles, it's crashing again.
    If anyone has come across this and has a solution, please help me out!
    Thanks,
    S

    Found a solution.
    https://blogs.adobe.com/indesigndocs/2013/06/memory.html
    Hopefully this helps someone else.
    Cheers!
    S

  • Launching Adobe Viewer from a Swing application

    How do I launch Adobe Viewer (or Reader) from my Swing application. I have a help menu item that needs to open the viewer with the PDF help manual. Since the application is cross-platform, do I need different versions of Adobe with my install package? Thanks for any help.

    Thanks. I tried the adobe bean and it seems to work fine until I select the "Print" icon. It crashes the Viewer and my application as well. I get the following:
    Any suggestions?
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : 11 occurred at PC=0xff2c614c
    Function name=realloc
    Library=/lib/libc.so.1
    Current Java thread:
    at sun.awt.motif.MTextFieldPeer.create(Native Method)
    at sun.awt.motif.MComponentPeer.init(MComponentPeer.java:169)
    at sun.awt.motif.MComponentPeer.<init>(MComponentPeer.java:179)
    at sun.awt.motif.MTextFieldPeer.<init>(MTextFieldPeer.java:68)
    at sun.awt.motif.MToolkit.createTextField(MToolkit.java:85)
    at java.awt.TextField.addNotify(TextField.java:194)
    at java.awt.Container.addNotify(Container.java:1579)
    at java.awt.Panel.addNotify(Panel.java:74)
    at java.awt.Container.addNotify(Container.java:1579)
    at java.awt.Window.addNotify(Window.java:349)
    at java.awt.Dialog.addNotify(Dialog.java:247)
    at java.awt.Window.pack(Window.java:367)
    at com.adobe.acrobat.gui.PDFPrint$PageRangeDialog.<init>(PDFPrint.java:144)
    at com.adobe.acrobat.gui.PDFPrint.<init>(PDFPrint.java:18)
    at com.adobe.acrobat.gui.PrintUI.printPages(PrintUI.java:183)
    at com.adobe.acrobat.gui.PrintUIVerb$PrintTransactor.printFileWithUI(PrintUI.java:591)
    at com.adobe.acrobat.gui.PrintUIVerb$PrintTransactor.buildChanges(PrintUI.java:556)
    at com.adobe.pe.notify.Transactor.commit(Transactor.java:44)
    at com.adobe.pe.awt.UIVerb$1.buildChanges(UIVerb.java:151)
    at com.adobe.pe.notify.Transactor.commit(Transactor.java:70)
    at com.adobe.pe.awt.UIVerb.invoke(UIVerb.java:51)
    at com.adobe.pe.awt.ToolBar.mouseReleased(ToolBar.java:419)
    at java.awt.Component.processMouseEvent(Component.java:3715)
    at java.awt.Component.processEvent(Component.java:3544)
    at java.awt.Component.dispatchEventImpl(Component.java:2593)
    at java.awt.Component.dispatchEvent(Component.java:2497)
    at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:2451)
    at java.awt.LightweightDispatcher.processMouseEvent(Container.java:2216)
    at java.awt.LightweightDispatcher.dispatchEvent(Container.java:2125)
    at java.awt.Container.dispatchEventImpl(Container.java:1200)
    at java.awt.Component.dispatchEvent(Component.java:2497)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:339)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:131)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:98)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:85)
    Dynamic libraries:
    0x10000 /shared/j2sdk1_3_1/bin/../bin/sparc/native_threads/java
    0xff360000 /lib/libthread.so.1
    0xff3a0000 /lib/libdl.so.1
    0xff280000 /lib/libc.so.1
    0xff260000 /usr/platform/SUNW,Ultra-4/lib/libc_psr.so.1
    0xfe480000 /local/j2sdk1_3_1/jre/lib/sparc/client/libjvm.so
    0xff210000 /lib/libCrun.so.1
    0xff1f0000 /lib/libsocket.so.1
    0xff100000 /lib/libnsl.so.1
    0xff1c0000 /lib/libm.so.1
    0xff240000 /lib/libw.so.1
    0xff0e0000 /lib/libmp.so.2
    0xff0a0000 /local/j2sdk1_3_1/jre/lib/sparc/native_threads/libhpi.so
    0xff070000 /local/j2sdk1_3_1/jre/lib/sparc/libverify.so
    0xff030000 /local/j2sdk1_3_1/jre/lib/sparc/libjava.so
    0xfe450000 /local/j2sdk1_3_1/jre/lib/sparc/libzip.so
    0xfd060000 /local/j2sdk1_3_1/jre/lib/sparc/libawt.so
    0xf4880000 /local/j2sdk1_3_1/jre/lib/sparc/motif21/libmawt.so
    0xfd010000 /shared/j2sdk1_3_1/bin/../jre/lib/sparc/libmlib_image.so
    0xf4600000 /lib/libXm.so.4
    0xf4580000 /lib/libXt.so.4
    0xfafd0000 /lib/libXext.so.0
    0xfafa0000 /usr/openwin/lib/libXtst.so.1
    0xf4480000 /lib/libX11.so.4
    0xfac60000 /lib/libSM.so.6
    0xfac30000 /lib/libICE.so.6
    0xf4380000 /local/j2sdk1_3_1/jre/lib/sparc/libfontmanager.so
    0xf4ba0000 /usr/openwin/lib/libdps.so.5
    0xf4860000 /shared/j2sdk1_3_1/bin/../jre/lib/sparc/libsunwjdga.so
    0xf4830000 /usr/openwin/lib/libdga.so.1
    0xf4560000 /shared/j2sdk1_3_1/bin/../jre/lib/sparc/libxinerama.so

  • Adobe Shape crashes on startup.

    Hi. have an iPhone 6 plus.
    Restored from a backup from an iPhone 6.
    Now Adobe Shape crashes on startup. Anyone else experiencing this?
    All software up to date.

    Hi. Yes the app has access to camera and images.
    I've toggled them on and off and restarted the app a few times with the same result.
    It feels like it is when it's just about to show the camera view that it crashes. It displays the camera ui for a few milliseconds and then crashes.
    The only thing i know that I have done is that I have made  a new library and have deleted one but i can't remember if I deleted the default library or not.
    There is something going on with the translation to swedish in the app.
    If I check in Illustrator CC I have a "My library" with Adobe Shape documents in it that I made then I had the app running on an iPhone 6.
    I have a "Mitt bibliotek" (Swedish for my library) that it says is deleted in Creative Cloud.
    And I have a "Mitt bibliotek" with Adobe Brush documents.
    Maybe it's looking for a library that's missing or choking on the translation of my library or something like that.
    (Although I now transfered the "deleted" Mitt bibliotek back to Creative Cloud from Illustrator. And started Adobe Shape again. But I get the same crash.)

  • Content viewer crashes after loading google map

    Greetings! I am making progress, finally on my first Edge Animate CC 2014 / InDesign CC 2014 DPS edition.
    I have finally gotten to the pplace where I need to display a Google Map for two different locations, each map will be loaded with a different button on click and replace the previous map. It works fine in the browser, but when I upload my folio through InDesign and load it into the Adobe Content Viewer on an iPad (Air) after clicking the MAP button (either one), the map loads and appears to be fine, then after about 10 seconds, the Viewer crashes. I have tried it repeatedly and by clicking both map buttons, the produce the same results.
    What should upload for someone to look at, or has anyone else ran into this issue?
    Below is the code for the Action(s):
    downtownMapButton:
    // insert code for mouse click here
    var mapFrame = sym.$("mapContainer");
    var map ='<iframe width="'+mapFrame.width()+'" height="'+mapFrame.height()+'" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="https://mapsengine.google.com/map/embed?mid=zE2zuZhUFeMU.kVkOwZos-Fiw" ></iframe>';
    mapFrame.html(map);
    // Show an element
    sym.$("mapBox").show();
    // Show an element
    sym.$("downtownPointerSym").show();
    // Show an element
    sym.$("mapContainer").show();
    sym.$("closeButtonSym").show();
    sym.$("prestonPointerSym").hide();

    Found a solution.
    https://blogs.adobe.com/indesigndocs/2013/06/memory.html
    Hopefully this helps someone else.
    Cheers!
    S

  • Adobe bridges crashes when opening a video file

    Adobe bridges crashes when opening a video file. i can open and view photos  but not .mov files or any other video file

    Just that one project, or any project?  Can you create new projects?

  • DPS viewer crashes on subscribe

    When I perform an iTunes subscription in iOS 7, the Adobe DPS viewer crashes and fully exits.
    Console log of the iPad shows:
    Oct  9 21:23:39 Jasons-iPad com.apple.launchd[1] (UIKitApplication:com.example[0xb7a7][4303]) <Warning>:
                    (UIKitApplication:com.example[0xb7a7]) Job appears to have crashed: Segmentation fault: 11
    Oct  9 21:23:39 Jasons-iPad backboardd[29] <Warning>:
                    Application 'UIKitApplication:com.example[0xb7a7]' exited abnormally with signal 11: Segmentation fault: 11
    Oct  9 21:23:39 Jasons-iPad SpringBoard[33] <Warning>: -[SBFolderController pushFolder:animated:completion:]
                    Folder icon <SBNewsstandIcon: 0x17c5a920; nodeID: "com.apple.newsstand">
                    Folder: <SBNewsstandFolder: 0x17c0d640> cannot be opened because it does not exist on the current page.
    Oct  9 21:23:39 Jasons-iPad ReportCrash[4306] <Notice>: Saved crashreport to
                    /var/mobile/Library/Logs/CrashReporter/viewer_2014-10-09-212339_Jasons-iPad.ips
                    using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
    Above, my App ID was changed to "com.example" to protected the actual ID.
    Nothing much to the code - been in use for over a year:
    adobeDPS.initializationComplete.addOnce(function () {
        var transaction = adobeDPS.receiptService.availableSubscriptions[productId].purchase();
        transaction.completedSignal.addOnce(function (transaction) {
            // This does not seem to be reached
        }, this);
    }, this);
    It displays available subscriptions, prompts for sign in, displays confirmation, and success iOS standard messaging.  After the purchase was successfully, the app immediately crashes.
    v31 running on iOS 7 - testing iTunes subscription using a sandbox account.
    Crash log:
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Subtype: KERN_INVALID_ADDRESS at 0x00000000
    Triggered by Thread:  0
    Thread 0 Crashed:
    0   Foundation                     0x2fe58a3a NSKVOPendingNotificationRelease + 6
    1   CoreFoundation                 0x2f4baeb6 __CFArrayReleaseValues + 190
    2   CoreFoundation                 0x2f44318a _CFArrayReplaceValues + 290
    3   CoreFoundation                 0x2f446b98 CFArrayRemoveValueAtIndex + 100
    4   Foundation                     0x2fe58c8a NSKeyValuePopPendingNotificationPerThread + 26
    5   Foundation                     0x2fe4728a NSKeyValueDidChange + 366
    6   Foundation                     0x2fe338c8 -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] + 84
    7   viewer                         0x002d306a 0xb8000 + 2207850
    8   CFNetwork                     0x2f18c428 __55-[__NSCFURLSession delegate_task:didCompleteWithError:]_block_invoke + 48
    9   Foundation                     0x2fe563c4 -[NSBlockOperation main] + 128
    10  Foundation                     0x2fe465a6 -[__NSOperationInternal _start:] + 766
    11  Foundation                     0x2feea768 __NSOQSchedule_f + 56
    12  libdispatch.dylib             0x3a6a781c _dispatch_client_callout + 20
    13  libdispatch.dylib             0x3a6ae49a _dispatch_main_queue_callback_4CF$VARIANT$mp + 274
    14  CoreFoundation                 0x2f4dc89c __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 4
    15  CoreFoundation                 0x2f4db170 __CFRunLoopRun + 1296
    16  CoreFoundation                 0x2f445eba CFRunLoopRunSpecific + 518
    17  CoreFoundation                 0x2f445c9e CFRunLoopRunInMode + 102
    18  GraphicsServices               0x3437965e GSEventRunModal + 134
    19  UIKit                         0x31d92148 UIApplicationMain + 1132
    20  viewer                         0x000d09a6 0xb8000 + 100774

    If you have an iPad of first generation, it is happening because lack of memory. Try to do PDF stacks instead of PNG/JPEG ones.

  • Adobe flash crashes constantly, certain pages will open, but very slow, or not open at all........never had a problem until I upgraded to new firefox 4

    when I go to open a page, it is very slow opening, or may not open at all........circle just goes around.....this is true for any site......mail, sites I have visited many times.......never had a problem until I upgraded to firefox4.......do I need to change firewall settings? If I do, how?
    Just updated adobe, it crashes more than not......

    First I already have my view set to show everything so that is not the problem.
    But I just tried opening "Computer" from the start button then type in profiles.ini in the address bar and hit enter. The profile manager opened with my profile listed. I selected it and hit start firefox and it opened as it should.
    I closed it again and tried to open it from the shortcut in my task bar and I got the Sorry window.
    But then I tried to open it from the short cut you get when you press the start button and program list and it work!
    I went back to my desk top and tried the short cut on the desk top and it worked.
    So I deleted the short cut on the task bar and created a new one and it worked.
    I rebooted the computer and tried again and the task bar shortcut works and has the right profile.
    So it seems that the problem is that the short cut was corrupted and was causing the error that caused the program to fail to open.
    I had no idea a shortcut could do that. In the past I have had short cut stop working but never do what this one did.
    I still have no idea where the profiles.ini is.

  • How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

    How do I merge more than one PDF document into one singular pdf using adobe viewer touch on a microsoft surface?

    Or using the Adobe PDF Pack https://www.acrobat.com/

Maybe you are looking for

  • How to open a .swf file in mavericks

    Can anyone tell me the easiest way to open a .swf file please? I have a brand new mac air with mavericks on.

  • Computer

    So my computer keeps saying check video cable but I use a do cable and monitor keeps going to sleep and says no signal what do I do  I have a HP 2011x

  • LINQ: Update a column with auto increment value

    Hi All, Greetings. I am very new to C# (though with lot of experience in VC++). Now a days, I am engaged in a C# project where I need to deal with ADO.NET DataTable and related classes. I am stuck up in a scenario as follows: I have a data table (of

  • Storing data

    Hi all Im designing a program to help with booking guets into a small hotel, When a persons details are entered, what would be the best way to store each customers details. Im quite new to java so if what i suggest is a bad idea then please guide me

  • Disk by uuid

    In Grub, the root device is specified by UUID, example: kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/8def79a8-3257-4412-a9d3-fe95a55fcb06 ro After I built my custom kernel, which doesn't need an initrd, booting using UUIDs no longer worked (I got a