ADSL network username and password required

Help, I've got someone trying to sort my home wireless but he's asking for my BT ADSL Network Logon Username & Password - I cant seem to find anywhere or have any record. Does anyone out there know?

If it is the Router login you require it is [email protected] also known as broadband user name, with no password needed.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

Could not complete backup; network username and password wrong....help!

I've been using the Time Capsule just fine for my automated Time Machine backups, until recently when they stopped working. I finally checked into it today, and it tries for about 10 seconds, then says "Time Machine could not complete backup. The network backup disk could not be accessed because there was a problem with the network username and password." I hadn't changed any of the settings, so I don't know why it would do this. So I totally erased the Time Capsule, set it to factory settings, gave it all new passwords and what not, created a whole new wireless network, etc... and still it's doing the same thing. Take a look at the screenshot to see what I mean.
Any help here would be appreciated.
Thank You.

Ok
Go to Applications -> Utilities -> Keychain Access. Look for an item named the same as your Time Capsule, and it will say 'Base Station Password" (or something like that), and delete it (just select it, and press delete on your keyboard)
Now when you try to connect to your Time Capsule for a backup, it will prompt for the password. Enter the password that you set just before.
Let me know if you have any more trouble.
Taylor

Username and Password Required for Wifi Connection, Not Being Asked for Username

I just updated my iphone 4s to ios 8 and attempted to join my school's wireless network, which requires both a username and a password. i am being asked for a password but not a username.
my question here is how to have the username be requested as well.
thank you in advance for answering.

Hi, did you ever find a solution to this? I see your post is old, but the exact same thing has happened to me and I can't figure out what the generic username and password would be. Any insight you have would be most helpful. Thanks!

OS X not remembering network username and password

I have had this problem since starting at my current office. (Over 16 months.) I inherited a computer from a previous staff person. Each of my computers have been Macs. (3 different computers in 16 months.) We are mostly a Mac computer office but our Active Directory and File Server are both Window PC's. BOOO!
Whenever I try to log in to the file server I get the request for the my network user name and password. The window already has a user name but it's not mine. It is the user name of a previous user of my original computer (From 16 months ago.). I say original computer because I now have my thrid computer which I migrated from the first and second one. I'm sure whatever the problem it is has come along with each migration.
I have looked in my Keychain Access and found the network password item for the file server. When I opened it my username and password are correct.
So... where do I go from here? Thanks for your help.

Try deleting it from KeyChain. Also look for any other passwords for other users in the past for this and delete them.
When you log back into the server, password fields should be blank. Put your's in and save it.

Using a guest wi-fi network with changing username and password

I am trying to access a "guest user" wi-fi network at my office. For security purposes, the guest network username and password are changed periodically. The connection worked fine until the username and password changed. Is there any way to access the setup of a specific wi-fi network on the iPhone and update the user name and password? I would like to be able to do it without resetting ALL the networks used?
I tried to use "Forget Network" and then restored the connection, but it appears the iPhone retains the old username and password in memory.
Thanks!
liv3itup

Well, I tried to duplicate what you talked about. I have my wireless here at home, and I chose, "Forget this network" and when I went to rejoin, it asked for a password. Many public networks take their username and password through the browser. Have you tried to open Safari to see if it will default to the username/password screen? I've used mine at hotels that change their access every 24 hours and if I try to log back on after the time, it defaults back to the login screen. That is the only solution that I can think of. And yes, if you go to settings and reset network settings, it will clear all of them.

Retrieve username and password from Portal in external appl.

Hi All,
I have deployed an web application containing jsp into OC4J. I have registered this application as an external application in the portal. I need to capture the username and password required for the external application in the jsp (deployed as web application) after the external application has been authenticated by SSO server.
Can i get it from the request or is ther any other way to capture the user credentials in the jsp of the external application?
Thanks & Regards,
SY

Actually if the JSP is registered as an external Application then it is the JSP itself that is doing the
authentication not the SSO server. The credentials are sent to the External Application either as HTTP
header entries or on the URL depending on the type of method chosen to submit the request. In an external
application the SSO server is effectively building the URL that would have come from the Login Page of the
application.
So in this case, if the application is being called as an external application, then they already have the
username/password. Else it would not be an external application.

Connecting printer to a secure wireless network which requires both username and password

I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match Yes

Hi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else

HT4623 When I joined my wireless network I set authentication required to on and di not eneter a username or password. I then went into safari and as requested entered my username and password. Now,however the iPod is remembering my credentials. How do

When I joined my wireless network I set authentication required to on and di not eneter a username or password. I then went into safari and as requested entered my username and password. Now,however the iPod is remembering my credentials. How do I clear my credentials?

Go to Settings>Safari and Clear History, Cookies and Data
Also go to Settings>Safari>AutoFill and Make sure that Names and Passwords are OFF and Clear All.

I cant get my iphone 4 tolog in to my company wifi. i updated to ios 6 and now it just goes to my companies login screen. i enter my username and password and it just sticks. however it will logon to wifi without a requirement for a user name and password

I have to log onto my companies wifi by first going thru a log on page that equires a username and password. before i updated to ios 6. it worked fine now it just goes to the login page and when i hit enter it doesnt do anything just stays stuck on that page. however the phone will log onto a regular wifi router that doesnt require any kind of username or password. any ideas on how to fix it. i have tried everything including reseting all network settings.

1. Settings>General>Reset>Reset Network Settings
or
2. Use "Forget This Network"

Firefox does not automatically load nor find the login page for a public network (i.e. username and password)

To log in on a public network without a password-key (not secured), a user login is required.
After connecting to the network, the browser, upon opening it, normally automatically loads the login page, in order to enter a username and password and connect to the internet.
Firefox doesn't find the login page automatically, so I need to switch to google Chrome just to log in to the network.
Does this have anything to do with user settings in the options of firefox?
Any ideas?
thx!

Hi,
You can try setting the login page as the [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page Home page] and choose to '''Show my home page''' beside '''When Firefox starts:'''.
Alternatively, and/or to preserve your current settings you could also pin it as an always present one-click away [https://support.mozilla.org/en-US/kb/what-are-app-tabs App tab].

OS X says D-Link DSM g-600 network drive needs a username and password.

Can connect my macbook to my wireless network, surf the net and detect network printer and shared files on my XP Home Desktop. The LAN portion consistists of a network printer, Linksys router, XPHome desktop and 500 GB external storage device. The storage device is a D-Link dsm g-600. The files therein were put there by the desktop and a now-defunct XP Home laptop over the course of 2 years. The laptop never had any trouble detecting, connecting to and reading files on the DSM-G600.
The Macbook detects it under "Finder", but fails to connect. Trying to connect elicits and demand for username and password. Connecting to the DSM from the XP computers never required a password and conecting to the device as an admin just requires the username "admin" and no password. D-Link says its an OSX problem and Apple says its a D-Link firmware problem. Before buying a ticket to India to find the phone techs that told me this, I'm wondering if anyone else had any thoughts.

Basics - Server 2008 R2 - SP1, WDS, MDT 2013
Well all, I've done this at least 20 times today and the deployment share info is still wrong...
Someone else built and messed with this thing so i'm trying to fix it. We have 2 MDT servers and 1 WDS that is on the Production MDT. I've turned the test MDT off.
It was working fine, until I updated the deployment share ... after adding some drivers for the surface pro 3 for the pxe boot
Very Simple bootstrap.ini
[Settings]
Priority=Default
[Default]
DeployRoot=\\MMPDEPLOY02\DeploymentShare$
UserID=xxx
UserDomain=xxx
UserPassword=xxx
KeyboardLocale=en-US
SkipBDDWelcome=YES
It continues to show up on the client as ||mdt901w8|deploymentshare$ (test server) (pipes for \ since it makes it a link and i'm new)
I've deleted all the .wim and associated files from all locations from the deployment share\boot folder and from the wds remote install\boot\x64\images folder where they are instead of the remote install\boot\images folder that everyone refers to.
I really can't figure this one out... I know it's something simple I'm over looking but I can't see it..
Any ideas..

Hp printer requires a username and password

My HP Deskjet F4583 wireless printer worked wonders with my Windows XP.
Now we've all upgraded to Windows 7 (very grumpy - everything worked just fine on XP)
Tried printing through wireless office network (that "I" set up), and suddenly get this:
"The server 10.0.0.3:80 requires a username and password.
THe server says: HP Printer Networking@."
followed by the appropriate fields.
So now what?
Since when was a username/ password option available - believe me I would have tried to omit it when creating the network - we don't have time to "play" with our gadgets; we just expect them to work with minimum fuss.
Please help...
This question was solved.
View Solution.

dave-k2 wrote:
The exact network was shown in my question - it is an 802.11 WiFi network configured for WPA2 authentication.
It is not an open network with no encryption or authentication.
It is not a walled garden network with no 802.11 encryption but using a web browser for authentication.
It is not a WPA2-PSK network with a shared key for 802.11 encryption.
It is a WPA2 network with 802.11 encryption and EAP authentication to a RADIUS server. It needs the printer supplicant to supply a username and a password. I own neither the AP nor the RADIUS server for this network, they are owned by the college my child attends.
There you go. Need to ask your IT department how to connect because the printer will never connect with a browser authentication. Also not supported on a Radius server.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Tthe network needs a username and password for devices. College. Options!?

I am a new college student and I want to print wirelessly. The network needs a username and password. The problem is when setting up a wireless network on the printer, it doesnt allow this. What are my options to print? Please help!?
HP Officejet 6500 e-all-in-one
This question was solved.
View Solution.

Printers do not work with networks that require a username and password to communicate on the network. Sorry.
The only way you will be able to use the printer wirelessly is through an ad-hoc connection. This means the computer will not an Internet connection while it is connected to the printer's ad-hoc network unless the computer has two network connections available (2 wireless or 1 wireless and 1 wired).
The top of page 138 of the manual details how to connect to the printer's ad-hoc network.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

How do I connect to an SMTP server that requires a username and password?

Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
                    new URLName("smtp", smtpHost, port, null-File,
                    "USERNAME", "PASSWORD"));
        smtpSSLtransport.setStartTLS(true);
        smtpSSLtransport.connect(new Socket(smtpHost, port));
        smtpSSLtransport.sendMessage(smtpMessage,                                                     message.getAllRecipients());
        smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
Gordon

I always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.).

ADSL network username and password required

Similar Messages

Maybe you are looking for