Advance amount display differently when used in program (HRTRV_IF_GET_TRIP)

Hi ,
When i test the function module HRTRV_IF_GET_TRIP to retrive the ADVANCE AMOUNT for TRIP transaction it giives me correct out put of table ADVANCE AMOUNTS. If i use the same function module inside the program but it gives advanca amount value multiplid by 100. (ex.10 HUF is displayed as 1000 HUF). It is also varying depends on the PERNR i am creating the TRIP. IF i use my personal number i get correc values populated in the FM. IF i use other PERNR to create the TRIP then it given me some other values.
Please clarify.
Regards,
Richard A

SAP assigns hardcoded 3 to currency key incase of percentage assignments...
I should be able to assign 10 points to myself for this

Similar Messages

How can i turn off all the mails that i recive when use any program form my iPad?

How can i turn off all the mails that i recive when use any program form my iPad?

Everytime i use the my ID recive an e Mail to inform me.

MapViewer fails to display lines when use NavigationPanel

I am using MapViewer version 10131-B061023 (i.e. 10.1.3), and am attempting to plot state secondary roads (lines) for the state of Montana. These lines display in MapBuilder, and also display in MapViewer when the first 'zoomed in' map is displayed. That is, I can see the roads for the part of the state I am zoomed into, and when I pan around the state the roads also display, but when I use the NavigationPanel to zoom out, the roads disappear. Has anyone had this problem? Any suggestions on how to fix this would be greatly appreciated. Thanks in advance.

I failed to mention that the secondary routes were in a foi rather than a base map. When I added them to the base map and removed the foi they appeared when I zoomed out. Am I missing some basic difference between the base map and a foi?

I am stumped I do not understand why my roommates macbook pro when duel screened will display perfectly on my monitor while mine refuses to, but mine will display perfectly when using another monitor that is not mine. Please help me out.

One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

HTML signatures distorted inside the Signatures and Stationery window preview/edit field, but display fine when used

I created an HTML signature and imported it into Outlook 2010/2013 by placing the .htm file into my %APPDATA%\Microsoft\Signatures folder. The signature looks and works great, however the signature looks distorted / severely squished in width when attempting
to view the signature in the Signatures and Stationery window within Outlook. What would be causing this? Is this a common issue when using .htm signatures?
It isn't too big of an issue as the signatures do work as expected when in normal use, however some users would like to tweak theirs using Outlook's built in editor and are not currently able to.

In my experience at least, that's a normal behaviour. The editor isn't fully WYSIWYG so if you do anything complicated in there it won't always give an accurate representation of what will eventually be output when you insert it into a message. I've seen
the same thing with signatures copied from elsewhere, displaying fine in the email but not in the editor, so it's not restricted to imported .htm files.

When using Vikas' program to load large files getting error

Hello,
I am using Vikas' program to load large data files: http://htmldb.oracle.com/pls/otn/f?p=38131:1
This works fine, except when I click on the button to create table, then I get a "not found" error--
failed to parse SQL query:
ORA-00942: table or view does not exist
What might cause this? I've checked grants and such and reviewed the code, but haven't figured it out...
Thanks!

Hello,
I am using Vikas' program to load large data files: http://htmldb.oracle.com/pls/otn/f?p=38131:1
This works fine, except when I click on the button to create table, then I get a "not found" error--
failed to parse SQL query:
ORA-00942: table or view does not exist
What might cause this? I've checked grants and such and reviewed the code, but haven't figured it out...
Thanks!

My Macbook Pro shuts down when using design programs

I bought the macbook pro about 3 months ago. The shut down screen appeared and asked me to shut down the computer several times when I am using design programs (like photoshop, illustrator cs2 and macromedia flash 8...) since i bought computer. I can't do anything except forcing the computer to shut down, and it's not good for the computer if i have to do this often. The computer is fairly new, and it really upsets me with this problem.

Welcome to Apple Discussions!
It sounds like what you are getting is a kernel panic. Read my FAQ* on the issue:
http://www.macmaps.com/kernelpanic.html
While uncommon, it is not unheard of. There are many possible reasons.
* Links to my pages may give me compensation.

Display "?" when using the sqlplus

hi
I met a strange problem when using the sqlplus . It is as follows :
[oracle@LinuxOracle oradata]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 10 10:21:27 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba;
I chose the default character set as installing the oracle10gR2 on the Rhel4U4 .
anybody who can help me to solve this problem ,many thanks
carl

addtional imformation
I used 'dbca' to create a database and chose the default character set .
the language I want to display is simple chinese.
who can help me ?
carl

Corrupted Sound When Using IM Programs

I have a HP Pavilion DV5z-1000. When I use IM programs (so far I have tried Windows Live Messenger and Yahoo Messenger), they seem to work fine for a while with both sound and video. However, after a few minutes, the audio becomes "corrupted". I hear a horrible rushing, static-like sound. This will stop after a few minutes but then reoccur. I have a broadband connection, so I don't think the problem comes from a slow connection. Additionally, the corrupted sound does not sound like the typical broken or distorted sound you get from a slow connection. Interestingly, the person on the other end can still hear me and does not hear any of this cacophony.
Any idea what may cause this? I thought it might be Windows Live Messenger but then tried Yahoo and I get the same result.
Thanks.

Thanks for the link but it doesn't really solve the problem.
I know it works in VLC, my problem is that I absolutely need to be able to use the clip(s) in iMovie HD because I'm filming a documentary and this is one of the most important interviews.
Even if it means finding a way to split the audio in some other program then importing the audio file I'd be ok with that, but I so far I haven't been able to figure it out...any other suggestions?
Thanks

Flex 3 Dashboard Displays Differently when Compiled Locally

I am writing an Adobe Flex Developers Center article on converting the Flex Dashboard example application to Flex 4.
http://examples.adobe.com/flex3/devnet/dashboard/main.html
The problem is the application renders differently when you right-click that application, download the zip source file, and compile it locally in Flex Builder 3 (see screenshot below).
Could a few of you please visit the above URL, download the code, import the project, then launch the app and tell me what you see?
After importing you will need to create an empty libs folder and right click another error message to recreate the html templates.
Thanks very much!

I am writing an Adobe Flex Developers Center article on converting the Flex Dashboard example application to Flex 4.
http://examples.adobe.com/flex3/devnet/dashboard/main.html
The problem is the application renders differently when you right-click that application, download the zip source file, and compile it locally in Flex Builder 3 (see screenshot below).
Could a few of you please visit the above URL, download the code, import the project, then launch the app and tell me what you see?
After importing you will need to create an empty libs folder and right click another error message to recreate the html templates.
Thanks very much!

PS CS5 Image Display Differs From Used ICC Profile In Win 7

Hi,
on my Windows 7 Ultimate x64 machine, I just calibrated my Dell SP2309W monitor using an i1DisplayPro and basICColor 5, creating a ICC v2 profile (I am aware of the problems under Windows with ICC v4 profiles).
It created the ICC profile and applied it to be used by Windows. I double checked under COLOR MANAGEMENT that the new ICC profile is being used. Although I can see that the new ICC is being used (desktop appearance changes), there are a few issues I am experiencing:
(1.) Windows Photo Viewer
The thumbnails in Windpows Explorer look fine (they DO use the new ICC profile), when I double click a jpeg and open the image it DOES NOT use the new ICC profile. When I click the PLAY SLIDESHOW button (starting the slideshow) in the opened image in Windows Photo Viewer, the images DO use the new ICC profile.
(2.) Internet Browsers
All current internet browser (Firefox, IE, Safari and Chrome) DO use the new ICC profile and display the image correctly.
(3.) Photoshop CS 5
When I open the same image - that Windows Photo Viewer does not correctly displays (according to the new ICC profile) - in Photoshop CS5, I get the same image display that Windows Photo Viewer gives me (when not thumbnail or not in slideshow mode) - it appears to be the sRGB display.
My color settings in PS CS5 are: North America General Purpose 2 > sRGB IEC 61966-2.1.
When I go to View > Proof Setup > Monitor RGB I get the image display using the new ICC profile.
Why does the image look different in PS than my calibrated monitor should output ?
I was under the impression (please correct me if I am wrong), that the sole purpose for calibrating my monitor was to get a uniform display across (ICC aware) applications. Even when one applies different color spaces to a document in PS, I thought the output on my calibrated screen done by the graphic card should always be according to my calibration and the settings in the ICC profile being used.
What Am I doing wrong or what am I misunderstanding ?
Any help or input is appreciated !
Thanks.
- M

Hello,
A note on monitor calibration: calibrating your monitor will not guarentee that every application will display color correctly, it's more of a step along the pipeline, and for the preview part of a color workflow it's the last step. Here's how color translation follows for an ICC workflow when previewing to a monitor:
Image Color Numbers > Document Tag or Workspace Profile > Monitor Profile
For non-color managed applications, if the original document is or isn't tagged with a color profile it will be translated directly to the monitor profile anyway. This is the equivalent in Photoshop of selecting "Monitor" in soft proofing. Selecting monitor in softproofing will bypass the tagged or workspace profile to translate colors directly through the monitor profile.
For most automatic color managed applications (like Firefox), the image will be translated through the tagged profile and then sent through the monitor profile. If the image is untagged or the profile is unrecognized, the colors get sent directly to the monitor profile.
For Photoshop, a tagged document will have its profile respected and then sent to the monitor. An untagged document will be assigned the workspace profile, which acts like a temporary document profile, and then gets sent to the monitor. This is often why users will notice Photoshop behaves differently from other applications. It's usually a case of the workspace coming into play. By default the workspace profile is set to sRGB. You can change this in Edit > Color Settings.
The purpose of the workspace is originally for printing workflows, as a way of keeping consistant color translations when dealing with both tagged and untagged documents. For web output workflows it can be useful for viewing everything through sRGB, which is typical of the average monitor output (not so with newer wide-gamut monitors, another source of confusion...) combined with the fact that originally most web browsers were not color managed. Hence viewing everything through sRGB is pretty close to what most monitors see and what untagged/unmanaged docs will look like.
Monitor calibration is useful only because it brings your monitor output to a "known state". In traditional workflows the monitor was always a middle-man, a preview device which was useful for getting an idea of what the printed output would look like before you print it. Since print colorspaces are often smaller than display spaces, it's feasible and useful to narrow down the monitor/display space and calibrate it to a known state, so that even if it doesn't totally match the print, you'll get used to its differences/limitations and they'll be consistent so long as the calibration is maintained.
For web output, your final output is often another user's computer monitor, which can have any form of behavior (most standard monitors are pretty close to sRGB, or use sRGB as an operating system workspace (default monitor profile). Wide gamuts behave differently, but I'm not sure if there's a particular ICC space that they closely match, or if different wide-gamuts are even that close to each other in their display color spaces.
Hope this helps!

Dynamic Image Displays Blank When Using In Visual Studio Project

I am trying to simply display a dynamic image in a report. I am using Crystal Reports XI Release 2.
I have two different environments: Local via Progress where reports are called using Crystal Viewer ActiveX, and over the web where reports are called from Open Laszlo and Visual Studio project.
The image is set to a blank image as default, and Graphic Location Forumla loads the image from the database (site.logo_location + site.logo_filename) which results in an image http:
www.vetinfo3.com\a.jpg.
When I run the reports locally using the ActiveX control, it works just fine and displays the image.
When I run over the web using OpenLaszlo, it displays a blank.
Troubleshooting
We are using Visual Studio 2005, which is bundled with an older version of Crystal that doesn't support dynamic images.
To address this, I loaded Crystal XI Release 2, which updated the version in Visual Studio and enabled the Graphic Location formula field on the dev machine.
I verified the Graphic Location field was set correctly.
This caused a Version error, so we loaded cr_net_2005_mm_mlb_x86.zip on server and specified the Version in web.Config.
No errors now, but when I build and publish the code, the image still displays as blank.
            From Fiddler
               GET http://www.vetinfo3.com/mdsol1/CrystalImageHandler.aspx?dynamicimage=cr_tmp_image_c5d6a923-293b-4f1e-8739-4e698f83b087.png
               Creates C:\Documents and Settings\Curtis\Local Settings\Temporary Internet Files\Content.IE5\PWRUX2XW\CrystalImageHandler[1].png
               Blank Image
According to issues within Visual Studio, they say the fix to this is to add the <httpHandler> in web.Config, but it is already there; added when we add the viewer to the project:
In web.Config I have some questions about this line:
    <httpHandlers>
      <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    </httpHandlers>
There are more service packs for Crystal XI Release 2:
crXIr2sp2_net_server_install.zip
crXIr2sp3_net_server_install.zip
crXIr2sp4_net_server_install.zip
I have not loaded these yet, but the readme files do not indicate they fix any dynamic image issues.
I am out of ideas on this; does anyone have any ideas?

What about if you take OpenLaszlo out of the picture? E.g.; use one of our samples from here;
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
I'd recommend vbnet_web_simplepreviewreport
Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Firefox Does Not Display Topics When Using "#" in the URL

I'm currently having a problem with Firefox not opening
context-sensitive help links using URLs, rather than map IDs. For
example, if the URL is
http://www.myhelp.com/index.htm#custom_topic.htm,
Firefox will load the page as expected (except it appears to
continue loading the page, which is another issue that is discussed
in another forum), but either immediately loads the parent topic
(if the requested topic is a subtopic in a book) or displays a
"Page Cannot Be Displayed" error. It's peculiar in that the correct
topic loads (the one after the octothorpe), but Firefox (or
WebHelp--I'm not sure who's to blame here) then goes to the parent
topic or displays the error. Any guesses?

I agree with Peter's obervation about test projects.
Let me suggest some patches. They may cure the
load-topic/reload-default-topic misbehavior.
In the output file whtbar.js look for this line:
else
if(sType=="hide2"&&(!gbNav4)&&(!gbOpera))
It occurs only once. Change it to
else if(sType=="hide2"&&(!gbOpera))
In the same output file, near the end, look for
function tryReload()
if (gnRE==1)
document.location.reload();
gnRE--;
Make it read
function tryReload()
if (gnRE==1)
// document.location.reload();
gnRE--;
About those JavaScript references you were deleting, you need
to keep them because they have browser-sniffing and filtering code.
Also:
In the output file myproject.htm look for these lines near
the beginning:
<meta name="description" content="WebHelp 5.50">
</head>
Delete </head> here because it belongs elsewhere.
In the same output file myproject.htm look for these lines
near the end:
</script>
<frameset cols="100%,*" frameborder=no border=0>
Make them read
</script>
</head>
<frameset cols="100%,*" frameborder=no border=0>
At the very end before </html>, insert
<body></body>:
<body></body>
</html>
Why, you may ask, would Firefox be affected by code that
filters for Nav4?
I don't completely get it, but it seems Firefox also
identifies itself as a Mozilla browser, and the ancient code in
whver.js appears to equate Mozilla with Nav4. Once this flag is
set, it is not turned off. In fact browser ID flags accumulate. So
Firefox may be burdened with RH browser ID flags for Mozilla, Nav4
and maybe Nav5, Nav 6, Nav61 and Nav7.
Just try to find your way through all the RH code filters
with those flags.
If you're really adventuresome, go into whver.js and add flag
definitions for gbFirefox (I think gb stood for generic browser,
i.e., not IE) and insert it into all the "if" conditions where you
think it should be treated the same as, or differently from, the
other browsers.
Disclaimers and warnings:
All of the above applies to RH 5 code. I haven't had time to
look in RH6. Adobe may have fixed some, not others.
Because these are output files, RH probably will overwrite
them when you publish a revised version, so you must check the new
published output.
As always:
It works for me but may not work for you; back up everything,
test and retest, etc., etc. My driver's license is good in my chair
but may not be valid elsewhere.
Good luck.
Harvey

Lag when useing simple programs

Hi
ok i have a problem with my macbook pro 13" 2.4GHZ 4GB ram, basically when i use Firefox (mainly Javas and videos) or World of Warcraft the display Laggs a lot and so does the cursor, sometimes so bad i cant quit the program. i have been advised to make a new user to see if that stops it, yet it doesn't.
Can someone please give me some advice. Thankyou, Jack

Good job Jacksears-
Next step would be to re-install the 10.6.7 Combo_Update. See if this helps especially if you just ran the software updater and installed the "delta update." Repair permissions after installation.
Jacksears wrote:
just scanned the machine for any viruses and its all good.
I do not know what anti-virus you have on your Mac, but some are known to slow things down and are of no value on Mac. YMMV. You might try un-installing the AV package.

Advance amount display differently when used in program (HRTRV_IF_GET_TRIP)

Similar Messages

Maybe you are looking for