Advice needed on suitability and hardware requirements...

Hiya folks...
I'm after a bit of advice...regarding whether or not Aperture will be suitable for me, considering my current Apple hardware and my current "workflow".
I'm fairly new to digital SLR photography (hobbyist only)...but have had a variety of non-SLR digital cameras over the years.
I shoot in raw and jpeg, maybe about 100 shots when I go out (landscape and general outdoor shots mainly, some wildlife). After I have deleted the stinkers, I'm usually left with 30-50 decent shots that I keep...my iPhoto library has about 1000 images that I like, and I'm assuming that Aperture wouldn't have performance issues with a library of that size, on my hardware.
From the library, I create web galleries, print out to A3 (max...usually 8"x6", some A4) and create photo slideshows on DVD/CD media.
I've been using a mixture of iPhoto, Photoshop Elements 3, and Photoshop CS.
iPhoto for photo import and organisation ; Photoshop Elements 3 for raw image manipulation, and minor tweaks ; Photoshop CS for the bulk of image processing. (The raw images produced by my camera, a Nikon D50, are not supported with the Camera raw plugin for Photoshop CS.)
Having to utilise 3 separate programs does grate after a while...and ideally, I would like to use a single program.
Aperture sounded ideal, but the £350 price is a little steep for a program that I may end up using as "iPhoto-on-steroids".
An alternative would be to upgrade to Adobe Photoshop CS2...although I'm not sure whether my software would meet the upgrade criteria...my copy of Photoshop CS was purchased via eBay (authentic CD, box and manuals), but the serial number, I later found out after purchase, has been distributed on P2P networks.
The combination of Adobe Bridge, the raw manipulation and editing features would mean, similar to Aperture, potentially a single program to cover all my needs.
So my options are...
1.Purchase Aperture for £350, which may be unsuitable (overkill) for my use (although I'm sure that over time I would use its features more and more)
2. Risk paying £150 for a Photoshop CS2 upgrade that may baulk at my dubious serial number for the "original" Photoshop CS.
3. Keep with my current software workflow...but dropping Photoshop CS, as my conscience is shouting fairly loudly. I'd miss the curves feature, and be out of pocket to the tune of £125...but that's my fault for not assuming the eBay offer was too good to be true...
4. Any other alternatives...?
So...knowing my "workflow", usage and requirements...can anyone offer any advice?
Thanks for your time.
iMac G5 (20" Rev B)   Mac OS X (10.4.3)   2GB RAM

Rob, I'll take a quick shot at this for you.
I'm fairly new to digital SLR photography (hobbyist
only)...but have had a variety of non-SLR digital
cameras over the years.
First, welcome to digital SLR photography.
I shoot in raw and jpeg, maybe about 100 shots when I
go out (landscape and general outdoor shots mainly,
some wildlife). After I have deleted the stinkers,
I'm usually left with 30-50 decent shots that I
keep...my iPhoto library has about 1000 images that I
like, and I'm assuming that Aperture wouldn't have
performance issues with a library of that size, on my
hardware.
You shouldn't have any performance problems with a library this size.
From the library, I create web galleries, print out
to A3 (max...usually 8"x6", some A4) and create photo
slideshows on DVD/CD media.
I've been using a mixture of iPhoto, Photoshop
Elements 3, and Photoshop CS.
Sounds pretty standard so far (except for using both Elements and CS).
iPhoto for photo import and organisation ; Photoshop
Elements 3 for raw image manipulation, and minor
tweaks ; Photoshop CS for the bulk of image
processing. (The raw images produced by my camera, a
Nikon D50, are not supported with the Camera raw
plugin for Photoshop CS.)
Pretty much the same thing I have done (only I use PS CS2 for everything). One note. If you are considering Aperture, I would strongly suggest that you put some samples of your images on a flash card and take them down to somewhere that has Aperture loaded and available for evaluation. Judge for yourself how Aperture handles your images. This is what I did with my D2X images and was happy with the results.
Having to utilise 3 separate programs does grate
after a while...and ideally, I would like to use a
single program.
Keeping in mind that Aperture was never meant to be a replacement for either Elements or Photoshop. It does offer some correction capabilities, but more along the lines of Adobe Camera Raw (though not as full featured.) Also, there have been a number of posts here where people have noted that the adjustments that they are making in Aperture aren't as good as with ACR. I can't see any difference on my system using my D2X files.
Aperture sounded ideal, but the £350 price is a
little steep for a program that I may end up using as
"iPhoto-on-steroids".
Again, I HIGHLY recommend you go somewhere where Aperture is loaded and you have the chance to use it yourself to see if it is indeed "ideal", before you buy.
An alternative would be to upgrade to Adobe Photoshop
CS2...although I'm not sure whether my software would
meet the upgrade criteria...my copy of Photoshop CS
was purchased via eBay (authentic CD, box and
manuals), but the serial number, I later found out
after purchase, has been distributed on P2P
networks.
This, I can't help you with.
The combination of Adobe Bridge, the raw manipulation
and editing features would mean, similar to Aperture,
potentially a single program to cover all my needs.
As I noted, I have CS2. I still use Bridge and ACR. In fact, prior to getting Aperture, Bridge was the answer to my organizational prayers, letting me easily sort through shots from a shoot to get the few I really wanted to keep. To me, adding Bridge and upgrading ACR in CS2 was worth the upgrade cost of the program.
So my options are...
1.Purchase Aperture for £350, which may be unsuitable
(overkill) for my use (although I'm sure that over
time I would use its features more and more)
True. But, you need to determine if it is for you now.
2. Risk paying £150 for a Photoshop CS2 upgrade that
may baulk at my dubious serial number for the
"original" Photoshop CS.
Again, I can't help you here.
3. Keep with my current software workflow...but
dropping Photoshop CS, as my conscience is shouting
fairly loudly. I'd miss the curves feature, and be
out of pocket to the tune of £125...but that's my
fault for not assuming the eBay offer was too good to
be true...
Your call.
4. Any other alternatives...?
Maybe someone else has one to offer.
Good luck.
Jeff Weinberg

Similar Messages

  • Software and hardware requirement of Discover 4i?

    What is the software and hardware requirement of Discoverer 4i?
    What is the requirement also for application-mode? I mean the application side.

    Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

  • Software and Hardware Requirement for Management Agent

    Can any one help me to find out the software and Hardware requirements for Oracle 10g Management AGent for various platforms.

    Hi I have looked the Metalink Note which is mentioned in the reply but that is not having the exact software and Hardware Requirements (i.e os packages required for unix platforms) for OEM Agent. Please help me to know the requirements pls.

  • Maximum user and hardware requirement for SAP B1

    Dear All,
    One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
    Rgds,

    Mark,
    Please refer to the following PDF
    https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
    Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
    Also check the following link
    https://websmp206.sap-ag.de/smb/sbo/resources
    Good luck
    Suda

  • Best back up software and hardware requirement for the same

    Good morning to all,
    I would like to know about back solutions. We are a small organization around 60 employees, currently we have windows server 2008 r2 and using symantec backup exc and we back up on external USB drives. Management not happy with Symantec 
    We plan to upgrade our servers , and moving to VMs  and plan to implement network storage.
    So we want a back up solution which could back up VMs ,Shared folder and other required data.
    What are the best practice and solutions for backups.

    Nopes :)
    It depends on you. I've been using Symantec from many years now ;)
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • Need advice for future design and hardware I should purchase now.

    I was wondering if someone could assist me in making a decision on where I should take the future design of my network. Currently the design has no redundancy and I've been told recently that my company has a bit of money to spend and that it needs to spend it within the next 2 weeks. I am fairly new to the company so haven't been able to really think about future redundant designs nor have I studied much about designing networks. There are about 200-300 people that may be using my network at once, all users aren't at the location in question but they may be asking for resources from our servers.
    I've included a basic design of the "core" of my network and would like any suggestions for creating redundancy in the future and also optimizing the way data travels to our servers. Do people generally have redundant Layer 3 switches for the core in small networks such as mine? I will be replacing the 2811 since it only has 100Mbps connections and was thinking, perhaps replace this with a Layer 3 switch with the plan to have another identical Layer 3 switch installed to offer redundancy in the future.
    Also, would it be a good idea to move the servers into a vlan on the core? Thanks for any advice on what I should be purchasing now with plans for redundancy being implemented over a year.  -Mark

    40k Can go pretty quick depending on the scope. Your server farm especially should be dual-homed capable of surviving link, hardware, routing, and software failure.
    It's going to be best practice your server farm be in it's logical subnet, so failover mechanism can be controlled routing protocols, as opposed to FHRP's such as HSRP/VRRP/GLBP. Especially since you adjust routing timers to sub-second convergence.
    Budget will be the primary limitation (as it always it) but ideally dual 6500's running VSS and FWSM would be the ideal way. Data centers should be designed with high availability in mind, hence the need to 2x devices.
    Depending on the size of the SAN/Virtual infrastructure Nexus might want to be considered but you will chew up 40k before you know it.
    Also make sure the server farm is scaled properly. Your server farms should be oversubscribed in a much higher ratio compared to your access layer.
    CCNP, CCIP, CCDP, CCNA: Security/Wireless
    Blog: http://ccie-or-null.net/

  • Advice Needed for Audio and MIDI Controller Software

    I am hoping someone may be able to give me advice on how I should approach my problem.
    I am currently running a live show with audio backing tracks and a small 12 par lighting system. The light system can be controlled via standard MIDI. I am using iTunes to play back sets of backing tracks, and manually controlling the lighting system using a dedicated foot controller.
    What I would like to do, is be able to use software to simultaneously play audio files and perfectly sync the lighting (fades, shots, etc. via midi) with the audio track. Ideally, I would be able to have the audio/lighting paired as discreet entities that could be grouped into sets.
    i.e.
    Audio-MIDI_1 = Audiotrack1 would always be paired with Lightcontroller_MIDI_events1
    Audio-MIDI_2 = Audiotrack2 would always be paired with Lightcontroller_MIDI_events2
    Audio-MIDI_3 = Audiotrack3 would always be paired with Lightcontroller_MIDI_events3
    I could the create a set of Audio-MIDI_x tracks which could be triggered in any order.
    I would like to have to option to be able to activate a single track, or have a complete group of tracks activated sequentially (but be able to stop the and start the group as needed - you never know what will happen in a live situation). It would be nice to have a time-line UI as well.
    Now the final requirement: it should be able to run on a PISMO PowerBook. <cringe>
    I hope I am not too confusing.
    I am thinking MainStage would not be the software for this task as Leo is not an option for the Powerbook.
    I have looked at QLab and showcontrolpro, but I don't think theses are right for me either.
    Any help or suggestions would be greatly appreciated.
    TIA

    Gary,
    With a Pismo you really are confined. I've been using some software from Alien Apparatus called Solo Performer Show Controller (www.alienapparatus.com) and it has a timeline to sequence lights where you can run 32 channels of midi or dmx lighting. The only setback is it needs at least a 1 GHZ processor. There may be a company like Sonnet that has an upgrade for your processor.
    The software is able to run backing tracks, send midi controls to effects units or other software, send hotkeys for apps, synchronize lyrics in a window or on an external monitor, controls a dmx fog machine, and also has a six button usb foot controller which can be configured for many things such as scrolling your songlist to select the next song, change volume of tracks, change a light scene, send a hotkey, trigger samples, etc. It is a bit pricey at just under 600 dollars but the foot control is durable, the company has excellent support and they listen to users to add features to the software.
    Hope this helps
    Thor

  • Quick advice needed on Observer and Observable...

    Ok at the moment i have about 10 sorting algorithms in 10 classes. They all extend another class which includes methods like print, randomise, user input etc etc which all sorting classes use. So basically my sorting classes only sort and nothing more is done in those classes.
    Now what i want to do is have some statistics on a GUI. This will include copy coperations, compare operations and total operations. I will obviously need to input where these operations occur for each sorting class. I want the GUI to be updated each time an operation happens. All my sorts run in a thread, i did this so i can choose the speed of the sort with a JSlider.
    My question is, will i need to be using the Observer and Observable interface? If so, can i have some advice into how i would structure this. If not, then how else can i do a statistics class. I tried a way without this approach, but it didn't seem too OO friendly. Any help is appreciated.
    Thanks in advance.

    I'm not a GUI guy and this is definitely not the best way to do it - but you could probably call an update method after each calculation or whatever. Make a static method that has a reference to your GUI form.
    This is definitely not an elegant solution - but I think it's explicit and readable, and that can be more valuable than elegance.

  • Advice needed on Waits and Timeouts - 8i on HPUnix

    I need some straight advice...We are running 8i on HPUnix. We have been tuning this thing for 6 weeks now and have most things under control (disk I/O, various cache hit ratios, etc.)...but...we still see a large number of waits...at least I think its a large number.
    Question 1. If the instance has been up for 72 hours and I see a count of io done waits for DBW0 of 2,966,179 with 78041 timeouts (as an example), is this a large number? Nothing I have seen in the Oracle documentation gives me a sense of scale.
    Question 2. What events do we have the ability to tune?
    Question 3. For those that we can tune...how do you tune them?
    Kurt
    813 483 2153

    I need some straight advice...We are running 8i on HPUnix. We have been tuning this thing for 6 weeks now and have most things under control (disk I/O, various cache hit ratios, etc.)...but...we still see a large number of waits...at least I think its a large number.
    Question 1. If the instance has been up for 72 hours and I see a count of io done waits for DBW0 of 2,966,179 with 78041 timeouts (as an example), is this a large number? Nothing I have seen in the Oracle documentation gives me a sense of scale.
    Question 2. What events do we have the ability to tune?
    Question 3. For those that we can tune...how do you tune them?
    Kurt
    813 483 2153

  • ADVICE NEEDED Apple TV and Airport Express vs Cable company modem

    In process of buying Apple TV and need some advice.  I have a cable moodem and am wondering if I should use that for Apple TV or should I also purchase airport express to use with Cable modem.  I currently do not have any airplay devices but might in future.  Recomendations about setup would be great.

    I suppose you could connect the Apple TV to your home network with a LAN cable...then have your PC wired to the same network...this would allow you to download movies, Netflix and YouTube from the internet to the Apple TV and also to play music from iTunes on your PC....but one of the things I really like about my new Apple TV is the interaction with iOS devices...it is great to mirror the desktop  from an iPad 2, it is great to show pictures etc. from the same iPad...I think you'd miss a lot if you didn't enable wi-fi...it seems like you could setup a wi-fi access point in your home for a very modest cost, and just connect the downlink from the wi-fi network to the hub of your cable modem...or your ISP might have an integrated wi-fi system you can purchase...when you setup wi-fi on Apple TV, you just need to know the name(SSID) of the wi-fi network and any password you might have..it works great.  The instruction book, though tiny, does a pretty good job of explaining stuff

  • Expert advice needed on Remodeling and line item Dimension

    Hi All,
    Scenario:
    I have a cube 0FIAP_C03 for line Item. Now in this cube one of the dimensions u201CC036 -Document Detailsu201D is reaching the size of the Fact table. We are planning to use Re-Modelling and shift some of the characteristics like 0DOC_NUMBER - Sales Document, 0AC_DOC_NO - Accounting document number etc from this Dimension to another Dimension to reduce the size of this Dimension Table.
    I have the following Questions:
    1Will it be possible to add a new  dimension and shift some characteristics from old Dimension to this new Dimension using remodeling( we donu2019t want to delete data from the cube)
    2.what are the other feasible options to overcome the problem I have mentioned in my scenario( like Line Dimensions)
    3.In case we can make this dimension as Line Dimension what other changes need to be made.
    I am looking for a detailed explanation with all prou2019s and conu2019s, So kindly help me with your expert inputs.
    Thanks,
    Prafull.

    Hi Prafulla,
    Answers to your questions
    1Will it be possible to add a new dimension and shift some characteristics from old Dimension to this new Dimension using remodeling( we donu2019t want to delete data from the cube)
    No, remodelling wont work as per my understanding. ie You will have to delete and reload data
    However, this also depends on the data in your dimension.....................................................
    Consider the following example
    Index(Dim-id).....Sales document............Sales Item............Accounting document
    1......................1233456........................10.......................A123 .......end of record
    2......................1233456........................20.......................A123.......end of record
    3......................1233456........................30.......................A123.......end of record
    Now suppose if you had to remodel the above dimension to move sales item to other dimension, then the dimension would appear as below................................................................................................
    Index(Dim-id).....Sales document............Accounting document
    1......................1233456.......................A123.......end of record
    2......................1233456.......................A123.......end of record
    3......................1233456.......................A123.......end of record
    Now the problem is for the same combination of sales document and accounting document you should have had 1 row in the dimension, but you are having 3 rows(indexes) hence you are flouting the uniqueness for read and write operations to the dimension.. So logically this shouldnt be allowed...
    However if your data in the dimensions is such that the uniquness of each row in the dimension is not disturbed, you could use remodelling.
    You can try this in quality.
    2.what are the other feasible options to overcome the problem I have mentioned in my scenario( like Line Dimensions)
    I am not sure if I have understood your question. But I will still try to answer. If the dimension table has reached the size of the fact table then it is appropriate to consider remodelling.
    Also you should consider embedding sales document and accounting document in the same dimension. Since there would be generally only one accounting document each sales document.
    Use line item dimensioin as far as possible(restricted by number of characteristics). It reduces one step whie query since SIDs are directly present in fact table.. so you don't have to scan through dimension table.
    Also have you considered archiving old dat not reported... It will reduce your dimension as well and improve performance...
    3.In case we can make this dimension as Line Dimension what other changes need to be made.
    -No other changes.
    A safer option is to delete and reload data. Anyway remodelling also recommends a back up...
    Its better to create a copy cube and use the copy cube/original cube for reporting until the other cube is getting processed to have minimal time of unreportable data.
    Apologies .. Looks like the text in the post is loosing the format in which I typed hence the allignment is not correct..
    Hope this helps,
    Best regards,
    Sunmit.

  • Expert Advice Needed on SSO and 9iAS

    Hi All,
    At work we are thinking of using Single-Sign-On
    for authentication of all our intranet Applications.
    We have used Oracle Portal which has SSO, but we don't really need Portal.
    What I need to know is:
    Does Oracle 9iAS contain SSO?
    Do I need a Oracle Database e.g. Oracle 8 or oracle 9 to use SSO?
    Can I implement SSO using just Oracle 9iAS and use it in my Java code e.g. JSP/Beans etc..
    Thanks in advance for ANY help,
    Barry.

    Hi Barry,
    Does this help you?
    http://otn.oracle.com/ultrasearch/wwws_otn/searchotn.jsp?p_Action=Search&p_Query=single+sign+on&p_Group=4&p_Group=5&Search.x=11&Search.y=10
    Good Luck,
    Avi.

  • Advice needed about JFrame and JDialog (moved from java programming)

    My main class in my application is a page where the user can choose to register or login. This class is a JFrame. If the user chooses to register, my register dialog is called up and the parent JFrame passed to the dialog:
    private void btnRegister_actionPerformed()
                    new Register(this);
              }Same happens for login. If the user chooses to login, my login dialog comes up and my main class JFrame is set as its parent. This is all fine because all the calling up is done in my main class, so i can just use 'this' to pass the JFrame.
    Now here is my problem. If the user successfully logs in, they should have access to control some events. Now i am not sure if it will be ok to make this new events class another JFrame, as it is practically the start of a new section in my application.
    Thats my first question. My second question is if i do make this events class a JDialog, is it bad coding not to give it a parent frame? Or would this be acceptable? My worries is passing the main class JFrame to a class which is only accessable by going through two other classes.
    Cheers for the advice

    It's Simple dude,
    Advice: Use JIternalFrame, for your purpose.
    And if u want to go with JDialog than u can do that in main method. Like when u call JDialog
    Register dialog = new Register(this);Check for login in Register class or what ever u want. Create new method like success
    private boolean isSuccess() {
    return success;
    } at Register Class. After Registeration change the variable boolean success value to true or false as per logic
    And add
    Register dialog = new Register(this);
    if(dialog.isSuccess()) {
    // Show loginDialg(this) or else
    }Regards,

  • Help/advice needed SwinEvent thread and synchronization

    I am having a problem where my app keeps locking up. I have a swing application that receives asynchronous realtime messages from a server.
    On receiving these messages my views are required to update the components. I do this my calling a method with a synchronized block that updates the views components in a SwingUtilities.invokeLater clause.
    This seems to work fine. However, sometimes when I click a menu item/button the app locks up.
    I have put some debug in that shows me the synchronized block started but did not complete?!?!
    I think this tells me that the SwingEvent thread interrupted my external notification thread, and caused some sort of deadlock.
    If this is the case then why does my synchronized block of code not complete. I am not altogether sure what I should synchronize around.
    For example I am doing something like this>
    public void notify(Model model){
    if(model == null) return;
    synchronized(model){
    System.out.println("started");
    SwingUtilities.invokeLater(new Runnable(){
    componentA.setText(model.getName());
    System.out.println("ended");
    My output when it locks is like this
    started
    ended
    started
    ended
    started
    At this point the app is frozen.
    So I guess what I am asking is as follows>
    Is the SwingEvent thread interrupting my external notification thread?
    If so, why is the synchronized block not completing.
    What should I synchronize?
    Any help would be greatly appreciated.
    Dr Nes
    I can only assume that

    I am having a problem where my app keeps locking up. I have a swing application that receives asynchronous realtime messages from a server.
    On receiving these messages my views are required to update the components. I do this my calling a method with a synchronized block that updates the views components in a SwingUtilities.invokeLater clause.
    This seems to work fine. However, sometimes when I click a menu item/button the app locks up.
    I have put some debug in that shows me the synchronized block started but did not complete?!?!
    I think this tells me that the SwingEvent thread interrupted my external notification thread, and caused some sort of deadlock.
    If this is the case then why does my synchronized block of code not complete. I am not altogether sure what I should synchronize around.
    For example I am doing something like this>
    public void notify(Model model){
    if(model == null) return;
    synchronized(model){
    System.out.println("started");
    SwingUtilities.invokeLater(new Runnable(){
    componentA.setText(model.getName());
    System.out.println("ended");
    My output when it locks is like this
    started
    ended
    started
    ended
    started
    At this point the app is frozen.
    So I guess what I am asking is as follows>
    Is the SwingEvent thread interrupting my external notification thread?
    If so, why is the synchronized block not completing.
    What should I synchronize?
    Any help would be greatly appreciated.
    Dr Nes
    I can only assume that

  • Advice needed on timeline and knob

    hi all ,
    i modify the pointgraph example and included a knob from memefx to control the tranlation of the rectangle.
    so now i can control the animation back and fro using the knob. However, the interaction between the timeline.play() and the knob aren't sync.Below is my code for main.fx. no changes to pointgraph.fx.
    can someone advise me?
    To duplicate the problem, let the animation play and click the pause button. turn the knob forward and click the play button. you will see that the animation start off at a different time.

    var variable = bind myKnob.value;
    var myKnob = Knob {
        ui: BasicKnob {}
        min: 0, max: 530, minAngle:0, maxAngle:1440
        dialLinesLongEvery:5, dialLinesNumber:50, dialLinesWidth:1,
        translateX: 55, translateY:280
        scaleX: 0.25, scaleY: 0.25,
    // timeline for animation
    public var t = Timeline {
        repeatCount: 1
        keyFrames: [
            KeyFrame {
                time: 5s
                canSkip: true
                values: [
                    myKnob.value => 530.0 tween Interpolator.LINEAR
    /* adding everything in group to make changes easy */
    var gp = Group {
        content: [pg, pg1, pg2]
    /* stage can be written inside run() method */
    public function run(){
        t.play();
        var s = Stage {
            x: bind stageX
            y: bind stageY
            title: "24-Hour Temperatures in Major World Cities"
            width: 550
            height: 400
            style: StageStyle.DECORATED
            scene: Scene {
                fill: Color.BLACK
                content: [
                    gp,
                    /* rectangle moving and showing animation */
                    Rectangle {
                        translateX: bind myKnob.value
                        x: 10,
                        y: 10
                        width: 500,
                        height: 500
                        fill: Color.BLACK
                        opacity: 1.0
                    reloadButton, textButton, myKnob, playButton,textButton2,stopButton, textButton1,
                    // axis plotter
                    Path {
                        translateX: 50
                        translateY: 0
                        stroke: Color.WHITE
                        strokeWidth: 2
                        opacity: 0.4
                        elements: [
                            MoveTo {
                                x: 10.0,
                                y: 300.0
                            HLineTo {
                                x: 450.0
                            MoveTo {
                                x: 10.0,
                                y: 300.0
                            VLineTo {
                                y: 10.0
                    /* data on Axis */
                    Group {
                        translateX: 50
                        translateY: 0
                        content: for(num in [0..7]) {[
                                Text {
                                    fill: Color.WHITE
                                    font: Font {
                                        size: 10
                                    x: num * 60 + 5
                                    y: 320
                                    content: "{3*num}"
                                Text {
                                    fill: Color.WHITE
                                    font: Font {
                                        size: 10
                                    x: -5
                                    y: 320 - num * 50
                                    content: "{5*num}-"
                    Text {
                        fill: Color.WHITE
                        font: Font {
                            name: "Arial Bold"
                            size: 12
                        x: 500
                        y: 330
                        content: "Time"
                    Text {
                        rotate: -90
                        fill: Color.WHITE
                        font: Font {
                            name: "Arial Bold"
                            size: 12
                        x: -10,
                        y: 80
                        content: "Temperature"
    }

Maybe you are looking for