Advice needed regarding hands free ring tone

I own a curve 8520 & also use a Bluetooth Supertooth visor go hands free kit in the car.
When the two items are paired and i receive a call the ring tone from the hands free kit is not the same as the ring tone on the phone.
When this happened with my W810i i was told it was due to the phone not being a2dp compatible ? if i have the correct name for it.
Can you advise how i can make my ring tone play throught the hands free the same as the phone.

Thanks Russ. If I remember right, I have been following your advice regarding archiving of projects.
I do import using optimized media. I do not understand what you mean by trashing Pro Res files. Where are they located? I tried to find out by openeing up the one archived project and have found this:
I clicked open the 'info' for all the four icons and have found that the Render files had occupied the largest space. Upon clicking open the render files folder, I found this:
Can you guide me further? Where are the Pro Res files you have mentioned?

Similar Messages

  • HT201272 I have downloaded free ring tone to my I phone 4s but can not set as ring tone.

    I have downloaded free ring tone to my I phone 4s but can not set as ring tone.

    You would have to create the ringtone.  Google will find several ways to do this.
    You can only buy ready made ringtones from the ringtones asections of the itunes store on your iphone.

  • Advice needed regarding iPad 2 software upgrade

    Hi,
    I have a 64GB WiFi iPad 2 that is still running the original iOS 4.3.3 with which it came out of the factory as well as a 16GB iPhone 4 running iOS 4.3.5. My question is: Should I upgrade to iOS5? Or rather, is it safe to upgrade to iOS5?
    My only iOS upgrade experience is with a 64GB 3rd generation iPod Touch which was ruined by iOS4 and made worse by iOS5. After the upgrade my video app no longer worked and the Touch was very laggy and glitchy. It would seem as if the the 64GB models react differently to iOS upgrades than the smaller capacity models. In the case of the Touch, the processor simply could not handle 59GB of content and a new version of iOS. The upgrade to iOS5 fixed the video app but then corrupted 2GB of the flash memory resulting in only 57GB now being available in stead of the usual 59GB. It is still just as laggy and glitchy as it was with iOS4.
    My question is: Does anybody have a 64GB iPad 2 (that originally came out with iOS4) that was upgraded to iOS5, that is filled to capacity with apps, music & video's (music video's & TV shows)? If so, how is iOS 5.1.1 running on it? Is your iPad still as responsive and smooth running as it was with iOS4? I use my iPad extensively for video, and if the video app no longer works the iPad will be useless for me. What did iOS5 do to your battery life? Do you still get the same great battery life as with iOS4?
    I would also like to hear from iPhone 4 owners now running iOS5.1.1. Is your iPhone still as smooth and responsive as with iOS4? What did iOS5 do to your battery life?
    Any help, advice and suggestions will be greatly appreciated.
    Regards
    Daniel

    I have the same pad as you, and I have kept up with the upgrades, and I have had no problems.  Zippo.
    I have a friend who stayed where you are, and he is fine, but does not have the new stuff that is included in the upgrades, also, he cannot update any apps that need the new system, such as pages, keynote, numbers, I photo garage band etc.
    If you take your time, the upgrade is relatively painless.  I lost no apps, nor data.  I needed to re enter my mail info one one account, and had to redo the wifi stuff for my home network.
    With 5.0, other than the above capabilities, I did not notice any speed improvement nor worsening.  With 5.1. I did notice that the machine is a little quicker.  May be my imagination.
    I did have a little battery issue initially, and found a couple of apps that we're trying to connect home and do something, and once I dumped them, the battery life is the same as it was.
    So no issues here at all.   I also have a phone 4, and can report the same thing, no issues, and a little snappier under 5.1.
    If you are still at 4.xx you are a couple of generations behind.  I don't know what you may have loaded, but it is possible that you have an that does not play well, and you may have issues, but I did not.
    Before you update, back everything up.  Photos, music and apps, and send a copy of any important days and spreadsheets to Dropbox or some where.  Then , if it gets messed up, simply set it up as brand new, then restore from that backup.  And if that fails, simply redownload the music, books, and apps from the store for free if you are using the same apple Id.

  • Advice needed regarding replacing the HD

    Hi
    I have bought a 160GB drive for my last generation Powerbook. When trying to remove the old drive the two outermost screws holding the actual HD in will not budge at all. I have removed all the other screws, and I'm not new to this, having happily replaced HDs in Titanium Powerbooks and recently in a MacBook Pro. But these two screws are completely stuck. I have the correct size screwdrivers and have actually already damaged the heads of two screwdrivers trying to get the screws loose, but have not damaged the screws at all. Do I have to admit defeat and hand it over to a workshop? And in that case can they do a better job than I can or will they just round the screws off?
    Does anyone have any experience of such a problem?
    Thanks
    Matthew Whiting

    You have gotten some excellent advice, and it will probably serve to get your screws out. But I wanted to add my 2¢ for some remedies of last resort just in case you need them. This does not come from any knowledge of powerbooks, just of getting out stuck screws.
    If you can safely apply a little heat to the screw head without harming anything else, this could help. You could use a low power soldering iron and you don't want to heat it up more than about 200º. This can do several things. If there is Loctite on the screw, it will soften it. It will also help the WD-40 to penetrate. And because of the difference in the coefficient of expansion between steel and aluminum, it will make the screw very slightly looser in the hole.
    And if all else fails and you do have to drill something out, you should be aware that there are such things as left-handed drill bits. You can get a set of 5 from Snap-on, the smallest of which is 1/8". You will also need a reversible drill motor. The thing about drilling out a screw with a left-handed drill bit is that it will sometimes bite into what's left of the screw head well enough to break it loose and back it out, since it is turning in the proper direction to do this. A regular right-handed drill bit rotates in a direction to tighten, not to loosen.
    Hopefully you won't need any of this information, especially if you have already applied the tiny bit of oil to be soaking into the threads for a few days while you attend to your baby daughter. But wanted you to have it just in case.
    Good luck!

  • Advice needed regarding Database design practice

    OK, here is my situation. I've started working for a company about 6 months ago. I'm a .NET developer with 12+ years of experience. Most of my experience with databases is with SQL Server. Recently I've discovered an design change with our Oracle database that our DBA made that I completely disagree with.
    We had a single Event table that holds records that pertain to all HTTP traffic on a network as HTTP Usage Event. There are multiple hardware units called 'Sensors' that monitor the network and report these HTTP events to the database. At some point not long ago, the table was holding just over a million records. Performance was suffering so the DBA decided to make a change to the database to accommodate. The change she made was to create a separate Event table for each sensor. Each sensor has an integer value as a unique identifier, so our database went from having a single Event table to now having Event_100, Event_101, Event_102, etc...
    So, we now have over 200 Event tables in our database. Anytime a sensor is added to the system, we need to add another table (actually two as there is a 2nd table that was duplicated in this same fashion).
    How do I present this to my boss and to the DBA in a way that I don't embarrass my boss (he approved the change) and without pissing off the DBA? I can't imagine that the table couldn't have been optimized as it was to take care of the issues with performance without so dramatic a change.
    Any advice would be greatly appreciated.
    Edited by: jreddy on Dec 15, 2010 6:51 AM

    There is a job to purge old data. Events are kept for 3 months. These jobs were actually part of the problem, as well as removing sensors from the system. In either of these cases, the deletion of the data (more so with the removal of a Sensor i.e. DELETE FROM EVENT WHERE SENSORID = X, was taking too long).
    I'm surprised that there have been people agreeing to this design. So, now we have 208 sensors, so 208 Event tables and another table named DATA_HASH duplicated 208 times. There may be a time when our database will be handling data from over 1,000 sensor units. Maybe even double that. Can anyone argue that having 2,000 event tables is the way to go? What if we need to add a new field to the table? Do that 2000 times?
    I've been looking at bit more at the data today. I found some event tables haven't got any data (0 rows) while others range in row counts of 2 million up to as much as 30 million? I've talked to SQL DBA's and they all think that Oracle should be able to handle billions of rows in a table.
    Also, just out of curiosity, I looked up the max size for a table in Oracle 10. I know the number of rows isn't the determining factor for this, but size of the data. I was astounded to find out the max size for data storage for a single table. 127 TB (yeah, tera bytes). Based on this size, it seems our data could be handled by 1 table, but then maybe I'm wrong.

  • Advice needed regarding learning path

    Friends, I have completed my OCP certification in 11g recently. I want to do OCM in 11g in long run. I need to learn skill-sets named  RAC and Performance tuning before preparing for OCM. So what learning can  I do next after OCP- RAC or Performance tuning ,any inputs will be highly appreciated !!

    921871 wrote:
    Thanks for your suggestions. I am already working as a production DBA for last 1.5 years for a organization. My project has no scope of RAC and performance tuning as of now. But I am very eager to learn them. I am confused what I need to start learning first, hence asked. In the long run, my aim is to gain practical exposure, experience along with OCM certification.
    I am confused what I need to start learning first
    Too many people seem to think learning is linear.  Yes, there are some things you have to learn before you can learn some other things.  But "learning" Oracle never ends.  Pick a subject area (RAC, or SQL, or Performance Tuning, or .. or ..).  Doesn't matter which.  Spend enough time with it to get a fundamental, working understanding of it.  Then do the same with another subject while at the same time keep your eyes open for adding to your understanding of the first subject.  "Rinse and repeat".  Spend time on this and one or two other high-quality oracle forums.  Participate and be willing to take your lumps and learn when you offer advice that is shot down.   Build yourself a virtual test system (Opinion | Ed Stevens, DBA) and then break it.  And then fix it using only the facilities you would have available to you in the real world.

  • Advice needed regarding Dummy Learning Environment

    Being a newbie, In VM I will install Oracle 11G/Oracle 10g and play in that environment , the aim is get thorough with Unix environment & basic tasks of DBA. So what combination of O/S will be most suitable for me?
    Any advice from experts will be great for me.
    Edited by: 916438 on Mar 31, 2012 5:59 PM

    916438 wrote:
    Being a newbie, In VM I will install Oracle 11G/Oracle 10g and play in that environment , the aim is get thorough with Unix environment & basic tasks of DBA. So what combination of O/S will be most suitable for me?
    Any advice from experts will be great for me.
    I would suggest that you use Virtualbox for creating the virtual machines and as a choice of O/S, use Oracle's Enterprise Linux. Both the products are from Oracle itself so are completely certified to run Oracle products and the biggest advantage, both are free!
    You can download Virtualbox and OEL from the below links,
    https://www.virtualbox.org/
    http://edelivery.oracle.com/linux
    Good luck!
    Aman....

  • Advice needed regarding best practice

    Hi - curious as to if what i have setup now should be changed to best utilize Time Machine. I have iMac with 750GB drive (a small chunk is partitioned for Vista) - lets assume I have 600 GB dedicated for the mac.
    I havetwo firewire external drives - a 160GB and a 300GB.
    Currently, I have my itunes library on the 300GB drive as well as a few FCE files. I have made the 160GB the Time Machine drive. Would I be better off moving my iTunes library to the internal HD and then using the 300GB drive as the Time Machine drive? As I have it now, I don't think my iTunes library is getting backed up. In an ideal situation, is it safe to assume your Time MAchine disk should be at leasta s large if not larger than the internal HD? Thanks.
    Steve

    Steve,
    I would recommend using a drive that is 2x the size of the files you are going to back up. This is specifcally in the event that you make changes to the files and Time Machine starts backing up the new files that you have created. It will back up once every hour and it will only make a back-up copy of files that you have modified. If you are backing up your home folder, and you are using FCE, I would say back up to the 160Gb drive would be sufficient. If you were planning on backing up your home folder & your iTunes library, I would recommend the 300Gb drive. The only reason that you would need a backup drive 2x the size of your HD is if you were backing up your entire drive.

  • Advice needed regarding 865PE Neo2 FISR

    I intend to order this motherboard either tomorow or Monday morning (depends if I'll find the VGA card I'm looking after). However I heard some disturbing rumors form some friends and so I thought this is the place to ask for advice:
    1) which BIOS is the best to use? I heard the 1,3 BIOS causes a lot of problems regardign stability and that it had being pulled from MSI's site.. which is a lie as I can see it here!
    Is anyone suing it and what's your experience with it?
    Should I use the 1.2 version instead ? Because I've heard that 1.2 does not allow you to disable the auto-overclockign feature... which might causde lock-ups if I chose to fine-tune the OC myself.
    2) I intend to run a RAId array . Can I boot from this array or I 'll ahve to buy a PATa disk as well?
    More so... can I boot from either the INTEL controlled RAID  or from the Promise RAID as well??? (because documentation on the Promise RAID controller is very thin... I'ver read the manuals and they are NOT at all informative on the matter. So I'm wondering: how do you set up the system so that it'll boot from the Promise RAIDs?? And ..is it better to boot from the Promise raids or from the ICH5R ones?
    Because I think the Promise controller routs the data through the PCI so there is a  theoretical limit of 133MB/s where as the ICH5R goes directly through the Northbridge chip so this is not a problem!
    3) Is it true that this board has some trouble cooperationg with an ATI 9700PRo based VGA card? I've reas of a few cases  of malfunctions especially in overclocked systems.
    Thanks in advance for any answers.

    koumooo,
    I´ll give you my experience after just a couple of days with my new 865PE Neo2FIS2R board.
    What I´ve found is that it´s a good Board with high potential, but also that it requires quite a bit of work  to get there and fully get reveny of that potential.
    However, My main interest is to get a stable system, not only with default values but with OC as well.
    To be honest I don´t really care so much about PAT and DOT
    since I only can reach to "Fast" and "Captain levels right now with PAT and DOT, but What was important for me was that when OC to 250FSB it was possible to lower AGP/PCI
    values ( otherwise system crash) ) to 67/33 which made it possible to run a stable system at 3.01GHz and a mem.speed
    at 4910 in Sisoft Sandra.
    Thats good enough for me..........
    Maybe I give more attention to PAT and DOT when I get high
    performance mem and a High Perf. VGA card and hopefully a 1.4 bios-update.
    So again, I think it´s a good board if you use it this way.

  • Advice needed regarding a - Adobe Photoshop Image 15 (.psd) - I can't open them correctly?

    Hi folks,
      I recently agreed to work on some art for a friend, he sent me some files that appear on my PC as Adobe Photoshop Image 15 (.psd) - Only when i open them in my Photoshop CC (All updates installed that are available from the time this was posted) they don;t appear to be the correct images? I have Google'd the phrase above but nothing appear on my searches that would enlighten me to what i may need to open these files correctly? can anyone let me know if the file type above is meant for Photoshop or one of the many additional programs within adobe's CC? If it is a Photoshop format then i apologies for time wasting and it may be that the file was corrupted possible before being sent?
       Thank you for your time.

    Does you friend also use Photoshop CC or does he use Photoshop CC 2014.  There may be some incompatibilities is some layers if he uses CC 2014..  However  CC should be able to open  .PSD file.   And Adobe Photoshop Image 5 type files like PSD, PDD extensions should be associated with Photoshop.

  • Why is it i can not find a place to get free ring tones for my LG enV touch?

    OK can anyone tell me if there is a way or a website i can go to to get free ringtones for my LG enV touch phone? I tried several sites none worked. And then can someone tell me how to put them on my phone? all i keep getting is sync music. SOMEONE PLEASE HELP!!!!!!!!!!!!!

    If texting is blocked, then you may be out of luck.  Bluetooth MAY work, but I've never tried it to transfer ringtones. (I had the LG Voyager, an older version of the Touch.)  There's an app called BitPim that may also work to add the ringtone to the phone's internal memory.
    Do you have an SD card?  If not, it may be worth it to get one, add the ringtone to the card in the Sounds folder (via your computer), then choose it as a ringtone with the card installed in the phone.

  • We need your hands free...

    NOKIA many years software development from which any device connected to the computer could interact from the same computer, ie you could write sms, sms in recibnir podias pc screen. My suggestion is, why could not implement APPLE IOS IPHONE in a system in which users can type messages from PC or Computer will maner to clear the device while it is connected. This application is highly necessary to IPHONE users.

    Well, I've never found it necessary, and I've been an iPhone user for 6 years.
    But if you think it's important you can leave a message for Apple at http://www.apple.com/feedback/iphone.html. Posting here will not get a message to Apple, because this is a user-to-user support forum.

  • Advice needed regarding TC set-up

    Dear Gang,
    I want to have a pure 802.11n network using the 5 ghz spectrum and the wide array setting. However, I have one desktop computer that is 802.11g. I'd like to run a 25 ft. Cat 5 cable to one of the LAN ports on the TimeCapsule and then shut-off the WiFi on this computer. However, strangely enough, I've always had all my computers (even desktops) networked via WiFi so I don't know how well using the LAN works.
    What are the thoughts of the group?
    I know that ethernet should give me greater speeds to the TC's hard drive and should solve my problem with bringing a non-802.11n machine in to a "pure" network, but I don't want to do so if the set-up is arduous or if doing so makes me lose a lot of features that I get in an all WiFi network.
    TIA,
    Mark

    Smokerz and Hopaki,
    Thank you for your responses. That's reassuring as it means that my dual G5 will get a little more life out of it by connecting it in to my "pure" system via ethernet.
    Two other quick questions:
    -should I connect my new iMac via ethernet to the router, too, even though it's capable of going on my system in 802.11n 5ghz?
    -also, as an aside, I'm trying to figure out if my new 802.11n network will equal my current 802.11g network in terms of distance as I have an Apple TV that's a few rooms over. That Apple TV gets about 4 bars of signal from my current network. Do you think that 802.11n at 5 ghz will have an equivocal range?
    Mark

  • Advice needed regarding massive system F***

    K,?So I wanted to install a new fan on gladys, my machine. I built her in september and she's worked fine since then till now. When i opened her up, i realised that i'd not plugged in certain lights from the front of my case etc, so to do this i took out the the two graphics cards and my Platinum sound card and kept them on a static bag whilst i plugged everything in. After assembling everything again and turning her on, The graphics card was showing vertical dashes and dots all over teh screen, eventually crashing; One card down. After testing the card to make sure it wasn't a driver issue, I then swapped it with the other card and removed the busted one. After 3 days, my X-Fi has now started making a high pitched whining as soon as i start Gladys up. I've done the usual driver re-install etc but to no effect. Now I'm positi've that i grounded myself and everything before i touched gladys' insides, and i didn't use a magnetised screwdriver, so someone please tell me how the hell this happened!?! I'm posting this on all three forums, Creative, Nvidia, and Asus. System Specs below:?AMD Athlon64 X2 4200+Asus A8N32-SLI DeluxeSilverstone 600w SLI power supply2 X Nvidia Geforce 7600GTsX-Fi Platinum2 GB corsair ram?

    have you tried disconnecting the lights you plugged in?

  • How do  I make a ring tone for iphone 4

    How how do  I make a ring tone from my original music , all I read is old  , surely I can convert something to a ringtone  for my iphone 4.
    Just seems like I cant do anything without buying something from Apple ... need some help , iM geetting tired of missing calls because of some naf ringtone.
    thanks if you can help .

    go to app store  get free ring tone converter, play your song must be an Mp3 or mp4... convert
    sync phone with computer  in itunes , turn sync on ... it should come across ..select on phone  in settings , sounds ringtones, its on the top line , play with click and voi la...   ..sorry ..just dissapointed that apple only had old discussions there  noone  really helped there ... cheers

Maybe you are looking for

  • Issue with Sorting by Custom Attributes

    In our custom SES query application, I am trying to implement sorting at the custom attribute level. I am having difficulty in understanding exactly how to set the options on doOracleOrganizedSearch() to achieve the desired result. We have a table ba

  • Apple pls fix this - MS Visual C++ Runtime error after installing itune 9.1

    Ever since I upgraded itune to the latest version 9.1, I kept getting the error messasge below when I start up the computer. Tried restoring system to a previous date, and uninstalling & installing itune a couple times to no avail. Any idea what's go

  • Opening a file from a java app (not applet)

    My program can't find the text file I'm trying to open in my stand-alone java app. I am specifying it like this: File filename = new File("myfile.txt"); FileReader = new FileReader(filename); It is in the same directly as the class files. It won't fi

  • Reminder to perform Service Entry Sheet

    Hi All, May I know is there any existing reports that I can utilise to send reminder to user to perform Service Entry Sheet after services have performed? Thanks.

  • JDBC Driver for SQL Server 7

    Is there a free JDBC Driver for SQL Server 7 available? If so, where? I created a server program that listens to a port and inserts records based on information it receives. It uses sun's JDBC:ODBC Bridge but it crashes randomly (sometimes weeks, som