AE CC 2014 can't find Quicktime Components after latest FCX upgrade

Hi there,
I am in a pretty big trouble. After installing AE CC 2014 (plus premiere, media encoder and so on) everything was just fine and worked flawlessly. Then I upgraded FCX and its new ProRes codecs and now none of the above mentioned softwares seem to work, reporting that there are no quicktime components installed in my system.
Actually the quicktime components are there since I can play save and export quicktime mov.s with FCX, quicktime, MpegStreamclip and so on as I used to do before the upgrade. Only Adobe CCs 2014 don't work.
I then donwloaded the components straight from Apple support site, reinstalled them but it didn't work; I disinstalled and reinstalled Adobe CC softwares and nope... neither this way it worked.
Can you guys help me?
It would be very much appreciated.
Cheers

The recent update to FCP X does, in fact, add a new Pro Res format, called Pro Res 4444 XQ. It is (apparently) the highest clarity Prores codec released to date, aimed squarely at high end broadcast and cinema professionals. Arri has announced that their new Alexa cameras will all support the new format.
The press release says:
ProRes 4444 XQ has a higher target data rate of 500Mbps that makes it the ideal choice for post production that requires visual effects processing or extreme colour grading.
“ProRes 4444 XQ is a fantastic choice for high-end mastering and archiving,” added Henning Rädlein, Arri’s head of Digital Workflow Solutions. “ProRes 4444 XQ offers 12-bit RGB encoding with a low compression ratio of 1:4.5 that maintains the superior tonal range of Log C, while providing the speed, ease of use and familiarity of ProRes.
You can just install the codecs from this update:
ProApps Codecs v1.0.5
But they are automatically installed with the latest updates to FCPX, Compressor and Motion. As far as I can see, the new codec is only available in Compressor X - I can't seem to access it through any other software, including After Effects, Media Encoder or legacy Apple software.
That said, I have the updates installed on the machine I'm using and don't seem to have any other Quicktime issues, other than no access to the new ProRes format. Sorry I can't offer more help.

Similar Messages

Can't find Range Extender after installing firmware upgrade to fix the 802.11n bug

I got my RE1000 shortly after Christmas but had trouble after a while where devices would claim they were connected to my wifi network but not really have a connection.
I discovered by doing a network scan that my router was broacasting/accepting B/G/N... all of my devices support N, so they were connecting on N... but the RE1000 wasn't broadcasting/accepting N... only G.
Since the RE was on G, this caused major issues trying to connect.
So in late Jan / early Feb I updated the firmware on the device as per instructions from the Cisco rep... but didn't have a chance to plug it back in and test until now.
Now when I plug it in, it lights up all solid green... but in the setup (Windows 7 / PC) the setup can't find the device. My laptop and the RE are within 25 feet of the router... and the laptop and RE are about 6-10 feet apart (I tested different distances to ensure it wasn't too close)
So now I'm stuck... I can't even verify if the RE1000 is properly updated.
What can I do or do I need to return this unit?

scunliffe,
What is the model number of your router? Is it a Linksys device too? You can configure the RE1000 manually, you will have to connect your laptop straight to the RE1000 via ethernet cable and access its setup page by typing 192.168.1.1 on your browser.
Check this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=76055e8973f5487f82d2d3f610da4c02_Accessing_the_web...
Title: Accessing the web-based setup page of the Linksys range extender
Article ID: 24379
Scenario 1 is applicable for you: Using a wired computer.
You may need to disable the WiFi capability on your laptop while doing this to make sure that it is not connected wirelessly to any network. You may need to have both the RE1000 and the laptop at least 6-10 feet away from your router.
I would say you are fmiliar with the wireless settings on your router, right? You will need those information to configure the RE1000 (SSID, Channel Width, Security Mode, and Passphrase).
For the steps, check this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=bc79b0ee350f404d82f231d729bc9530_Manually_Configur...
Title: Manually configuring the wireless security settings of the Linksys RE1000
Article ID: 24344

After Effects CC 2014 fails to load Quicktime Components.

After Effects CC 2014 fails to load Quicktime Components and unable to export or render .mov, .mp4 or any type of quicktime videos.
The application will launch and I can create and edit projects and comps but I am unable to render any type of movie files. I can render images sequences.
I have the latest version of Quicktime (10.3) and Quicktime Pro 7. Please let me know what I need to do to get AE CC 2014 to render movies.
Thank you.

Kevin,
I’ve reinstalled Adobe AfterEffects CC (version 12.2.1.5) and am still having the same issue with the failure to recognize Quicktime.
Can you assist?
John Luu
Art Director / Digital Marketer
1702 Washington Avenue
Houston, Texas 77007
Tel: 713-523-5711 ext. 208
Fax: 713-523-6083
[email protected]
www.axiom.us.com

I accidentally deleted QuickTime from my computer. Then I did a system restore and retrieved it. Now Itunes can't find QuickTime and will not open. Is there a fix for this without my Ipod?

I accidently deleted QuickTime from my computer. Then I did a system restore and retrieved the program. Now Itunes can't find QuickTime and will not open.Is there a eazy fix for this without using my Ipod? Ihave 6K songs in Itunes that I can't get to.
Thank You
T-BILL

Hmmm. There's a couple of things that might be going on with that one.
Let's try an uninstall and reinstall of QuickTime first.
If you're using XP, head into your Add or Remove Programs control panel. Select "QuickTime", click "Change" and then click "Remove".
If you're using & or Vista, head into your Uninstall a program control panel, select QuickTime, and then click "Uninstall".
You can get QuickTime back either via Apple Software Update (in your Start menu go "All Programs > Apple Software Update" ... QuickTime should appear in the "New Programs" section), or by downloading a QuickTimeInstaller.exe from the following location:
http://support.apple.com/kb/DL837
Does your iTunes launch properly now?

"After Effects can't find Quicktime installed on this system" error message. Using Mac 10.9.2

First time I've had to launch After Effects Creative cloud on my new mac running 10.9.2
I keep getting an error message saying AE can't find quicktime installed on this system.
I've been able to work in After Effects but can't make a quicktime movie from a composition.
Anyone have this problem solved yet?
JM

This should help: troubleshooting QuickTime errors with After EffectsIf not, try this: fixing permissions problem that impedes start of Adobe applications

Can't find home drive after reinstallation of O.S.X

Dear friends,
I have one ibook G4 and a Macbook Pro. Two days ago, the ibook G4 failed to start up, I tried in safe mode then pass through. Then I run Onyx-automation followed by restart, after that neither my desktop nor the sidebar of the finder window show the home drive icons,( I partitioned the internal hard disk into two drives). But when I run Disk utility and found both are there correctly, including the files and capacity, usage etc. it tested both drives "appears OK". Yesterday, I tried to reinstall O.S.X Tiger 10.4 without removing previous system via a firewire to my Macbook Pro which installed with Leopard( the disc drive of my ibookG4 corrupted last year).
finally, the hard drives are still invisible, I did tick the display options for hard disks from the preference panel of Finder. To the worse, the same problem happened to my Macbook Pro after I restarted it.
It seems a simply software issue, physically the hard disks are ok through the disk verify and permission verify.
Headache! Please advise ASAP.
thank you,
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 6:58 PM in response to: cjunxing
Reply Email
what happens when you enter commandshiftc in finder? that should show all the drives. if it doesn't, maybe the drive has acquired the hidden flag. run the following command in terminal
sudo chflags 0 /
you'll have to enter your admin password which you won't see as you type it. that's normal. see if the drive shows up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 7:11 PM in response to: V.K.
Reply Email
dear V.K.
When I enter commandshiftc in finder, it only shows up "network", then I followed to input sudo chflags 0 / in terminal and password, but the drives still not show up.
is there any other options to try out?
many many thanks
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:01 PM in response to: cjunxing
Reply Email
run the following command in terminal and post the results. this will list permissions flags and acls on the startup drive.
ls -ladeO /
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:03 PM in response to: V.K.
Reply Email
I run the command as follows.
Last login: Tue Nov 3 11:04:49 on ttys000
cjunxing:~ junxingchen$ ls -ladeO /
drwxrwxr-t 38 root admin - 1360 Aug 11 10:25 /
cjunxing:~ junxingchen$
pls advise
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 2, 2009 8:34 PM in response to: cjunxing
Reply Email
these permissions look fine. sorry, i don't know what the problem is or why the drive would not show in finder. does it happen on all accounts? make a new one and check from there.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 1:11 AM in response to: V.K.
Reply Email
hi, V.K.
after running the two commands, suddenly, The Macintosh HD icon showed up at both desktop and sidebar in finder, but the other drive (I partition into two parts) still not showing. Then I open Onyx and tick the "unhidden those hidden files", I found that drive. So I conclude it was hidden by sth. But I don't know how to unhidden it, the icon always in grey.
Can you please instruct again.
thank you.
Junxing
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:41 AM in response to: cjunxing
Reply Email
aha, so it was a hidden flag after all. then run
sudo chflags 0 /volumes/*
you may need to restart after that to make the second drive show up.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz
cjunxing
Posts: 9
From: china
Registered: Jul 8, 2008
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 5:33 PM in response to: V.K.
Reply Email
Dear V.K,
I run the command at my Macbook Pro, my second drive show up. So exceited! However, when I tried with my ibook G4, neither drives come out, is there any difference in the commands between Tiger and leopard. just now, I check the hidden files with Onyx, both drives are there.
Pls guide me.
thanks
macbook pro Mac OS X (10.5.4)
V.K.
Posts: 20,162
From: Toronto
Registered: Oct 24, 2005
Re: can't find home drive after reinstallation of O.S.X
Posted: Nov 3, 2009 6:46 PM in response to: cjunxing
Reply Email
sorry, I haven't dealt with Tiger in such a long time I don't remember if it respects chflags. ask on Tiger forums.
Mac Pro 3.2 GHz Mac OS X (10.6.1) Mac Pro 2.66GHz, powerbook G4 1.5GHz

I don't have a source attribute for this (maybe I wrote it myself!):
There are visibility toggling instructions at [this web site|http://www.pinkmutant.com/articles/invisible.html] using Terminal or Applescript.
If you don't like Applescript or Terminal there is an application called [JuhOS X|http://www.saunalahti.fi/~juhruo/juhosx> that lets you toggle visibility on individual items. It does not have the most intuitive interface but your drive should appear on the first page. Check it really is invisible, then click on the drive and toggle visibility. Effects will not take place until you restart your finder, so the easiest thing to do then will be to restart your computer.

HT1414 Ipod Touch can't find Bluetooth device. (Jam Box) Upgraded Itunes software did a backup and restore on the Ipod. My PC sees it fine. IPod used to work with JamBox. Reset Jambox, no luck. Followed every instruction from the forums. Still no luck

Ipod Touch can't find Bluetooth device. (Jam Box)
Upgraded Itunes software did a backup and restore on the Ipod.
My PC sees Jam Box fine. IPod used to work with JamBox. Reset Jambox, no luck.
Followed every instruction from the forums. Still no luck.
Reset Jam Box to factory settings.

Did a network reset on the Ipod after the backup and restore. No luck

Sibelius 7.5 can't find "sounds library", I reinstalled and upgraded but no success. Any ideas. I'm on imac oxa 10.9.4.

Sibelius 7.5 can't find "sounds library", I reinstalled and upgraded as Sibelius online help suggested but to no avail. Anyone have any ideas? My display speakers do work.
Thanks,
Jccnwmac

Ok, problem fixed, if not solved. A very helpful Apple tech walked me through opening terminal and entering a sudo command line that established my user name as the owner with owner access. Like magic, everything reverted back to original state of affairs.
Reviewing the console log of the error, it started when I tried to wake up the iMac from sleep with network access from another Mac, which should not have been a problem. This is in the category of "Who knows?" If there is a repeat, I'll come back here and post it.

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

I can't find the photos after I have saved them from a text message, It says attachment saved, where do they go and how do I get there? Thanks

Here to help shed some additional light on this case, jdondr. I also own a Maxx. With your phone, if you access the Gallery, there should be a folder named: Messaging. If you look at the upper left hand corner, you should see a drop down box. Is it currently set to Albums?
NicandroN_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0

Trouble opening a just created Pages file.....error message says I need a newer version of Pages......Apple Store says I have version 5.0.......opening an older Pages file it says I have version 4.3.......can not find any way to try another upgrade to 5.0........please help......
Thanks

Personally, I would not recommend deleting/removing the iWorks 09 folder for several reasons: one is that the new versions have had several functionalities removed and until you decide that you can work with the new one and do not miss any features the older version had, I would leave the old one in place. Personally, I will not be using the new versions.
The second reason is that you can accomplish what you want using a different approach: simply open a Get Info window of your document and choose which version of Pages you want this to open in - you can also stipulate that all docs like this are opened with whichever particular version.
FWIW: Once you have edited an old document in the new Pages version, you can no longer open it in the older version. However, you can still export it to the old version.

I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Just to be clear for others who might read this thread: There is a free trial available for both CC and standalone (perpetual license) customers. The free trial for both sets of customers is called "CC"; but if at the end of the trial you want to convert to a standalone (perpetual) license, it's just as easy as with previous versions. You pay $149 ($79 if upgrading), get a license key, and enter the key into the free trial.

Can't find my notes after updating to OSX10.9

Can't find my Notes after updating to OSX10.9.
Notes appears blank when open it. Help says they should have transferred from Mail, but they haven't.
Any tips on how to get them back?

make sure you have itunes 11.1 installed

Time Machine can't find external drive after installing Lion

Time Machine can't find external drive after installing Lion. I have a Laice 1 terabyte external drive that worked fine with Snow Leopard and now no show ... tried connecting it to front port and Mac Pro can't see it. Also lost Office,Quicken, and Final Cut Pro says: " You can't open application because Power PC apps are no longer supported" this is Not a good surprise!

Does the drive work when just directly connected? If so, have you prepped the drive?
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Click on the Options button, set the partition scheme to GUID (only required for Intel Macs) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

HT3680 where can i find this program after reading the whole story?

where can i find this program after reading the whole story?

could this knowledge base article be what your looking for?:
HT3680

AE CC 2014 can't find Quicktime Components after latest FCX upgrade

Similar Messages

Maybe you are looking for