AFAB - Repeat Run & Restart Run

Hello Sap Experts
Can anyone kindly explain the situation we need to use "Repeat Run" & "Restart Run" available in AFAB.
Kindly expain.
Thanks & Regards
Deepak Garg

Hi Deepak,
Repeat run is used to post the depreiciation for assets in a period, for which the planned depreciation has been posted.
Ex: You have run the dep for 01-2010, then in the same period you might have added some more assets and need to be posted depreciation for the same period again. In this case repeat run would be useful.
Note: this repeat run can be done for the last posted period only.
Restart option is to continue the depreciation posting run from a last dep run, which is stopped due to some errors casused at the system level.
Thanks,
Srinu

Similar Messages

  • Dep. run restart error

    we have  run depreciation run for asset 100020(useful live 3 years) for June. in July.10, we change asset useful live to 5 years,
    now we run AFAB for June and choose restart run, however, the output list is empty.
    we also try repeat run, but still no result, we have choose test run and list assets, output list only
    how can we re-run for June? thanks

    Hi,
    why restart? Restart is used the program is terminated during a posting run for various reasons, then the program has to be started again in the restart mode to clear the data base of possible inconsistencies. In TABA-XBUKZ = 1, a restart is necessarry.
    Can you see in AW01N plaed depreciation that should be posted per AFAB?
    If no, you have to check the depr. calculation and depr. key on the asset.
    If you have planed depr. you have to make a normal depreciation run in the following period, or a repead run for the previous period.
    Regards Bernhard

  • Depricaition restart Run.

    Dear All,
    we have changed the depriciation start date of one asset and runed the deprication run with out opening fiscal period so the run was terminated. now we have reset the deprication start date and want to run the depriciation restart run, but the system is posting the documents where as we dont want to post any document in that particulat depriciation period.
    can any one suggest how it can  be done.
    Thanks & Regards

    Hi,
    It is possible to repeat the posting run within the period last posted. In the repeat run, the system posts changes to depreciation, as compared to the depreciation amounts from the previous run.
    Normally the repeat run is carried out at the end of the fiscal year, if completing postings are necessary because of corrections to manual depreciation or depreciation terms.
    Regards,
    Eli

  • Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

    Hi,
    I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
    But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
    Regards,
    Arminder Singh

  • How to invoke the shutdown event tracker when running restart-computer

    In Windows command shell, it is possible to run shutdown /d to specify a reason code and /c to enter a comment into the shutdown event tracker to log why a shutdown was being performed.
    I'm not seeing an equivalent parameter for the restart-computer cmdlet in PowerShell.  Is it possible to invoke the shutdown event tracker when running restart-computer?

    help restart-computer 
    says no.  There's nothing wrong with using native commands, in a number of cases they are better than what PS provides.
    I hope this post has helped!

  • Restart run of FPCC0002

    Hi.,
    Please let me know the process of restart run of FPCC0002. We have  executed the the FPCC0002 in 100 parallel jobs, out of whcih 10-20 jobs got cancelled.
    Can any one please let me know the  process of re run of the entire job again.
    Thanks in advance.
    Ramesh

    Hi @Valiant22 ,
    Welcome to the HP Forums!
    It is a terrific place to find answers.
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I understand that you let a friend use your notebook to download an update to a USB flash drive and   ran out of space before completing the download.  Now you have no sound on the notebook.  Is that correct?
    Are you running Windows 8?
    Is it possible the update installed in your notebook? 
    There is a recent Windows update that has been causing havoc with the sound on Windows 8 computers.  No Sound from Speakers (Windows 8).
    Did you accidentally mute your system?
    You also said you are unable to do a backup.  How are you trying to do your backup?
    Did you use the Windows backup, backup from the recovery manager or third party software?
    Was there an error message ?
    If you are not running Windows 8 please reply back with your Operating System and the  exact model of HP notebook  you have.
    How Do I Find My Model Number or Product Number?
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • I need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

    i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.

    Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
    Mac: http://support.apple.com/kb/ts1591

  • Keynote is not repsonding , how do you get it to open a powerpoint that is not Keynote is not respond to. It just runs, and runs and never opens, and I have to force quit.

    Keynote is not responding.When I click on Keynote Powerpoint presentation icon that is saved on my desktop, it just runs, asnd runs, and runs. I heve to force quit it. I'v never had this happen before. Never had this problem until last night when it would run and run and run. What can I do to open this powerpoint presentation?

    I had this same problem as well. The original file had been converted from PPT, and it just got to a point where, while opening, the beach ball would just spin and spin and...
    I followed some advice I saw posted somewhere, as follows:
    1) Delete everything that is inside of Library/Caches and also ~Library/Caches; i.e., the one is accessed through "Macintosh HD:Library:Caches" and the other, ~Library:Caches folder is accessed by going to the Finder's  "Go" menu and holding down the Option key. Delete everything inside each of these Caches folders.
    2) Restart the machine and hold down all 4 keys of Command + Option + P + R while starting up, until you hear two bell chimes. After the 2nd bell chime you can let go. This resets the parameter something or other.
    Open up Keynote and open yoru file. Should work. Worked for me.

  • How to run depreciation run

    hi, please tell me how to run depreciation run, and how will the account that is assigned in account determination for accumulated depreciation will get posted.is it like it gets updated once u run the depreciation run

    Hi,
    Depreciation Run is thru AFAB Tcode. you need to specify the company code and the period/fiscal year for which you are running. unless for the first time, depreciation run should follow a sequence. 3/2006 only after 2/2006 is run. you also have an option to test run.
    a. run the depreciation (AFAB - via background)
    b. check the job (SM37, ensure its completed)
    c. process through SM35 (batch)
    you check the TABA table for details of postings.
    The document type (for depeciation posting, usually AF), the Gl Accounts are based on the customizing in the SPRO->FI->Asset Accounting->Depreciation.
    Rgds.

  • How to run change run in process chain when it fails

    HI All,
    How to run  attribute change run in process chain when it fails. Give me the procedure with clear description. Is there is any difference with 3.x versions in running this.
    Thanks,
    Pratap Reddy

    Hi Pratap.
    If BI Accelerator is not being implemented by ur company, in that case if change run fails u'll proceed by 'Repeat' process option as usual we do in 3.x.
    If BIA is exists, in this scenario u can not repeat as we do in 3.x. U have to drop the indexes on cubes effecting that change run and run the change runs. Once it is finished recreate BIA Indexes on cubes.
    Warm Regards,
    Ramki

  • I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have my Calendar app syncing with iCloud.  Every time I open it it says, "Moving Calendars to Server Account..."  It runs and runs and does not stop.  As a result, I cannot access my calendars.  Please help.

    I have the same problem, I tried the solution of Dr Cox but that didn't work as he said go to system preference then mail, contacts etc. but I don't have that.  Can someone help?
    Elaine

  • My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.

    My HP mini 210-2080NR will not boot up.  The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish.  Diagnostic log shows rusult 0303.  Any ideas would be helpful.  Thanks.

    You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
    If HP no longer has Recovery Media for your model, order them here
    http://www.computersurgeons.com/Default.aspx

  • Check printing is running and running.

    Hi,
    Check printing in payroll is running and running. I looked at database end , nothing slowing. pLease let me know where and what can I have to check?
    Thanks

    Hi,
    Please post the application release along with the database version and OS.
    Was this working before? If yes, any changes have been done recently?
    Can you find any locks in the database? Any errors in the database log file?
    Do you have the statistics collected up to date?
    Please enable trace as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]) to find out why this concurrent program takes long time to run.
    Thanks,
    Hussein

  • After Running the "Run Summarization" Required Filed is not updating in Software Updates

    hi all,
    i am facing this issue in SCCM 2012 SP1.
    I have sync the patches from WSUS successfully and it is showing. but the Required field is not updating (showing 0 for all updates) even after running the Run Summarization several times.
    Can anyone help?
    -Vasanth vignesh

    As Jorgen said, the summarization makes no difference -- the summarization task simply takes the data already in the DB and makes it available for display in the console. Thus, you need to verify the the actual client compliance scanning process.
    For the updates in question, are the clients showing as unknown compliance in the console?
    Also, have you checked the reports? As mentioned, summarization is simply for the console. Info shown in the reports is straight from the DB and does not require summarization.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • It takes long time to load the parameter's value when running we run report

    Hi,
    It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
    Thanks

    Hi jori5,
    Based on my understanding, after changing the parameter, the report render very slow, right?
    In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
    refer to this article:
    More tips to improve performance of SSRS reports.
    In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
    to optimize your report:
    Troubleshooting Reports: Report Performance.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

Maybe you are looking for

  • Can you help me?the config error about ORACLE Web Application Server3.0 for Solaris,

    hello anyone i install oracle7.3.4 server in Sun Sparcstation20 Solaris2.6 Japanese everything is ok, and i want to install ORACLE WEB appliation server 3.0too the installer is ok too, i startup the serivce >owsctl start wrb >owsctl start admin but w

  • VPN Split Tunneling Unsuccessful

    I am working on creating a split tunnel to work with a test vpn group profile. We have an external proxy service that slows users down when they are VPN'd in because their web traffic then goes through us. My goal is to configure only private IP's to

  • Color toner for HP LaserJet 1536dnf MFP

    It was my understanding that this printer will print in color.   What do I need to make it print in color, or was the packaging misleading, and it only prints in b&w?

  • File paths

    I changed my file organization by placing my images in an images folder, instead of just loose on the server. In addition, I uploaded revised html pages several times that have updated code for the file paths, directing the file paths to the images f

  • How do we track payments against Repository Contracts ?

    Hi Gurus, Is there any way can we track payments done against Repository Contracts. Business example : We have Estate Contract ( Gardening Contract ) , which don't run through Purchasing department and we decided to use Repository contract to capture