After 10.4.8 - Am I the only one with NEW problems??

After years of experiencing glitch-free connection to the Internet via our cable provider and my AEBS and AX - (3 laptops and a G5 iMac) after the latest update, it seems the whole system imploded.
As I've posted here previously, after this "update" none of our laptops in our home would connect as they have before. Consequently, I unplugged everything from the system, reset the AEBS, and found (after troubleshooting) that it would connect ONLY if security was NOT applied. (Hence, I am running my network right now UNprotected, something I've never had to do.) If I gave the AEBS a name, and also applied security, NO connection.
The second part of this problem is that at our small office at another site, which runs wirelessly on a LinkSys router, all three Mac laptops (two new MacBooks and my PowerBook G4) all connected seamlessly and received strong signals UNTIL the latest update. Since then, none of the Macs will connect, though it still recognizes the LinkSys network, however, there are NO bars to indicate any signal.
The worst part of this is that the PC laptops in the office are still all connecting without a problem. One can just imagine the taunting we Mac users are tolerating at the moment while we are scratching our heads trying to figure out what's gone wrong!
Another friend of mine, elsewhere, who uses a Mac laptop and G5 iMac emailed me recently and is also experiencing these same problems with his home-based AEBS and has had to forego security to get his AEBS working as I have done.
Is Apple recognizing there is indeed a new, unresolved problem here?
Rachel.

I also have new p roblems with my airport connection. That may be related to the last system update
An interesting diagnostic follows : it looks like the wireless network gets blocked for a few seconds, in a cycle. It does not happen from other wireless systems on the same network. Changing the access point (I bought a new one!) does not change anything, it's clearly related to the MacBook. A Powerbook G4 has the same problem. I really suspect the system update...
The ping delay is set to 0.1 sec to display more clearly the pattern (the default 1 second is undersampled but shows the same behavior). sudo is required to have a delay < 1 sec.
sudo ping -i 0.1 192.168.1.1
PING 192.168.1.1 (192.168.1.1): 56 data bytes
64 bytes from 192.168.1.1: icmp_seq=0 ttl=64 time=0.652 ms
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=0.592 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=0.698 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1248.873 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1148.780 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1048.699 ms
64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1678.287 ms
64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=1578.245 ms
64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=1478.168 ms
64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=1378.117 ms
64 bytes from 192.168.1.1: icmp_seq=10 ttl=64 time=1278.042 ms
64 bytes from 192.168.1.1: icmp_seq=11 ttl=64 time=1177.974 ms
64 bytes from 192.168.1.1: icmp_seq=12 ttl=64 time=1077.884 ms
64 bytes from 192.168.1.1: icmp_seq=13 ttl=64 time=977.882 ms
64 bytes from 192.168.1.1: icmp_seq=14 ttl=64 time=877.815 ms
64 bytes from 192.168.1.1: icmp_seq=15 ttl=64 time=777.712 ms
64 bytes from 192.168.1.1: icmp_seq=16 ttl=64 time=1950.617 ms
64 bytes from 192.168.1.1: icmp_seq=17 ttl=64 time=1850.564 ms
64 bytes from 192.168.1.1: icmp_seq=18 ttl=64 time=1750.475 ms
64 bytes from 192.168.1.1: icmp_seq=19 ttl=64 time=1650.478 ms
64 bytes from 192.168.1.1: icmp_seq=20 ttl=64 time=1550.406 ms
64 bytes from 192.168.1.1: icmp_seq=21 ttl=64 time=1450.333 ms
64 bytes from 192.168.1.1: icmp_seq=22 ttl=64 time=1350.329 ms
64 bytes from 192.168.1.1: icmp_seq=23 ttl=64 time=1250.307 ms
64 bytes from 192.168.1.1: icmp_seq=24 ttl=64 time=1150.325 ms
64 bytes from 192.168.1.1: icmp_seq=25 ttl=64 time=1050.166 ms
64 bytes from 192.168.1.1: icmp_seq=26 ttl=64 time=950.037 ms
64 bytes from 192.168.1.1: icmp_seq=27 ttl=64 time=850.035 ms
64 bytes from 192.168.1.1: icmp_seq=28 ttl=64 time=749.995 ms
64 bytes from 192.168.1.1: icmp_seq=29 ttl=64 time=649.978 ms
64 bytes from 192.168.1.1: icmp_seq=30 ttl=64 time=549.998 ms
64 bytes from 192.168.1.1: icmp_seq=31 ttl=64 time=450.020 ms
64 bytes from 192.168.1.1: icmp_seq=32 ttl=64 time=350.083 ms
64 bytes from 192.168.1.1: icmp_seq=33 ttl=64 time=250.049 ms
64 bytes from 192.168.1.1: icmp_seq=34 ttl=64 time=150.061 ms
64 bytes from 192.168.1.1: icmp_seq=35 ttl=64 time=50.048 ms
64 bytes from 192.168.1.1: icmp_seq=36 ttl=64 time=0.630 ms
64 bytes from 192.168.1.1: icmp_seq=37 ttl=64 time=0.606 ms
64 bytes from 192.168.1.1: icmp_seq=38 ttl=64 time=0.672 ms
64 bytes from 192.168.1.1: icmp_seq=39 ttl=64 time=0.670 ms
64 bytes from 192.168.1.1: icmp_seq=40 ttl=64 time=1.060 ms
64 bytes from 192.168.1.1: icmp_seq=41 ttl=64 time=0.599 ms
64 bytes from 192.168.1.1: icmp_seq=42 ttl=64 time=0.646 ms
<br>
MacBook Pro + G5 + Powerbook G4 Mac OS X (10.4.8)

Similar Messages

Why isn'y home sharing working? Am I the only one with this problem...

I've watched about 12 youtube tutorials on how to use home sharing and none of them are working. ive redownloaded itunes and its still not working.
what's going on !?
Help!!!!

Hi there,
The good news is that M-Audio have just released a new set of drivers. Check out the following support article:
http://www.m-audio.com/index.php?do=support.faq&ID=36be2fb74b90752fe3568b07c20a2 189
While this relates specifically to Leopard, perhaps you were falling foul of some driver issue.
Time to try updating your existing drivers and let us know. By the way, no, you were FAR from the only person with this problem. M-Audio have been very slow in getting drivers out. Let's hope this is now a thing of the past.
Pete

Am I the only one with no problems with the froyo 2.2 update

I did my update on 4/20 bout 10:30pm ny time it took bout 10 min to dl and bout 10 min for the install and what not, after that I updated my flash to 10.2 and tried out my new features, was amazed how fast it was like my phone was on redbull, everything is good battery life is bout the same if not better, not having issues like I been reading, so am I the only one, who else out there had no problems updating and no issues with it

I updated my phone to 2.2. Almost everything seems fine. I now have Flash and it made some small improvements in a lot of features such as E-mail viewing is a bit nicer and web viewing is a bit better. Some background colors have changed. The phone seems to run apps a bit faster or improved in minor ways. The GPS Google Maps stuff works well as before. It did reset my phone personalization presets like my homescreen, a minor thing. One game app stopped working but I deleted and reinstalled it and it works fine. I kept all my music, contact list and data on the phone. Nothing lost. All in all I am very satisfied with the update and pleased. Thanks Verizon and Samsung, now please get to work on Gingerbread 2.3.

Am I the only one with this problem Seconf Try for an answer

Hi to all Encore 2.00 users
I have searched the forums for a similar problem and have drawn a blank.
Can anyone tell me why, when making changes to an Encore Project the sound tracks to the visual ( which are still there) will not play.
For example changing the title of a button within a menu, or perhaps importing an extra sequence I find that I have to delete all the Audio from the various timelines and drag them in again from the project to make them play.
Providing I make no changes the Encore Project is just fine.
I would be very interested if someone could enlighten me as to why this happens.
Best Regards
Allan

Hi, thanks for the reply but it doesn't happen to only one specific app, it happened with Clash of Clans, FIFA 14, etc.

Am I the only one with this problem? And is there a fix for this? What causes it to happen? More details in the description. Thanks!

Hi, I have an iPhone 5s, sometimes when I'm using an app(game) I am unable to quit the app.
The funny thing is: the app is still working fine, doesn't hang and I can still interact with it, but I just can't quit it or access multitasking( be it using home button or assistive touch)
and
I'll have to force shut down the whole phone(lock and he button together), which I dislike doing.

Hi, thanks for the reply but it doesn't happen to only one specific app, it happened with Clash of Clans, FIFA 14, etc.

Am I the only one with a problem with iMovie since the Mavericks update for Mac???

My iMovie keeps freezing, causing my whole computer to freeze and all I can do is shut it down and then the whole project is gone when I open the computer again. It will say that I have 1 project or 2 projects or whatever but no projects show up? And if I create a new movie with the same name as the previous ones, it will say that the project already exists? This is the third time within 30 minutes I have to start all over with a project cause it just keeps freezing and I have to shut the whole thing down by pressing down the on/off button, cause its the only thing that does not freeze. It's frustrating, please help, anyone?

I have no issues with suspend-resume cycle with networkmanager.

Video Capture help...I can't be the ONLY one with this problem!

Warning: Long post ahead!! I just want to make sure I'm providing detailed, complete information on my predicament. =)
Okay...I am using a PowerBook G4 15" running OSX 10.4.8. I recently picked up the Canopus ADVC 110 in order to capture video from my game consoles...this is something I was doing a lot of for a LONG time with the graphics card on my desktop PC. But the card is pretty old now and the screenshots it takes don't always look so good anymore, plus I thought it would be cool to be able to do this with my laptop, since then it's like having a portable TV. The Canopus works...more or less. But I have some problems...
The first is the lag. I have a splitter so I can output the S-video signal from the console to both my TV and other devices at the same time, and I've noticed there is a delay with the signal reaching my Powerbook screen through the Canopus (when doing the same thing with the PC graphics card, there is ZERO lag time between the TV and the PC). One of the reasons I wanted to do this - as I mentioned above - is to have another screen for gaming; my friends and I often have lan parties or simply have more than one game being played at the same time with a large group. The delay in the video/audio signal reaching the screen through the Canopus is very small, but in a fast-paced game it's crippling.
Second problem is that I have had a very hard time finding a program that will simply let me view the video in full-screen. The REAL-TIME video, that is...I want to view in full-screen (or at least a really big window, if not ACTUALLY full-screen per se) as the video is coming in. Plenty of programs will let me record a clip and watch that in full-screen, but the incoming signal is constrained to a little tiny viewer window. Again, this is important for the "portable TV for video games" idea.
Third problem: video quality. So far, the best quality has been obtained by iMovie, and for still captures, simply using OSX's screen grab function (shiftapple3 or 4) on iMovie, but even then everything still looks kinda grainy and fuzzy, the incoming video and the screengrabs. I tried a couple download programs, including BTV, which looked promising but turned out to be dissapointing with horrible screenshot quality and video quality in it's weird, screen resolutiong changing phony full-screen mode. All the screenshots I took with BTV have all these horizontal lines running through them. It's especially bad if the shot has any kind of movement in it.
SO...I have overall been very surprised and frustrated at how hard it has been to do this. Especially considering how easy it was on my Windows-based PC. I just bought an ATI card with S-video and audio inputs, and it came with a program that allowed me to view video in full screen, record clips, and take stills all in the same program, with decent quality (stuff looks a little washed-out, especially now that the card is three years out of date, but it doesn't have fuzziness or lines like all the screens I've taken with the Canopus do) and absolutely zero lag time. With my newer, sleeker Mac laptop (and it's a MAC...the graphics/video/creative stuff powerhouse) it seems to be nigh impossible.
I don't need a program with lots of fancy editing options, which all the ones I have tried seem to have. I just want to be able to view the incoming video in full screen, and take screenshots and clips with good quality.
And elmininate the lag, if possible! I don't know if this is an issue with the Canopus (or would be an issue with ANY similar device) or if it's something that could be solved with a different program. Any and all help is appriciated!!
PowerBook G4 15" Mac OS X (10.4.8)

I'm using the tools which fullfill my needs best.. so, if the PC offers you "better" results, use it.. no dogma..
delay: sure, the electronics have to digitize the video.. a process of high computation = time/delay ..
quality: a TV signal fills about a quarter of my Mac's screen (or less) .. looking at it in "fullscreen" you have to blow up.. .every pixel get 4x4 pixel = low quality...
and: you go from digital to analogue to digital .. there HAS to be a loss of quality ...
BTV offers full-screen, doesn't it..?

I see I'm not the only one with Cloud problems....

I did a search to see if others were having problems with the Cloud service. I started getting error messages on my desktop but didn't give it much thought because I don't care all that much about the desktop. But today I keep getting a message from the Cloud app....well I guess it's the Cloud app. It tells me to sign in...which I attempt to do....then it says I'm locked out and to go online and change my password. So I do that....still have the same problems on my phone....whatever I'm doing ...it stops and here comes the stupid app I guess asking me to log in to the Cloud. I use the new password and it still doesn't work. Then I checked the Cloud on the desktop...can't sign in to that either. So I have now attempted to call the number that has come up on my phone and on my desktop to call.... 800-922-0204...and after being redirected to some other number I've been on hold for over 15 minutes.
So anyway, now I see that lots of people are having Cloud problems and the really irritating thing is that the responses from the Verizon people are just no help whatsoever and they have this fake cheery sound to them...like they want you to think nothing is wrong and I haven't been on hold forever etc. etc.
Why not just admit that Verizon is having lots of troubles...looks like for at least a month but maybe several months....with the Cloud service?
Just admit it lol....
And then when it's fixed let me know. But then I guess they couldn't charge me for it if they admitted it.

This sucks. I go in with a phone problem, they transfer everything to the cloud to do a factory reset only to decide they will have to send me a replacement phone. So I spend the afternoon trying to get my photos and stuff off the cloud, only to constantly get an error. I don't want the cloud, I want my stuff and to disconnect. They have me on hold for 10 minutes, try 100 things again over the phone, then ask if I want to wait while they get a guesstimate on when the cloud will be up. I said no, they will give me a guess and either they will be right or they will be wrong. She was surprised by that answer!

My 6th generation ipod nano volume adjusts itself and turns down volume without me touching it. This is the second ipod on which this has happened. I can't be the only one with this problem. Help!

My ipod nano 6th generation has started changing the volume while music is playing. It doesn't matter whether I am running or sitting. It will turn volume down to zero in the middle of a song. This happened on my last ipod a few months ago and I returned it and got a new one. This is my second grey one. I don't want to have to return it again, but I might.

Take your iPod Nano back to the Apple Store. Let them see what you are seeing. Only this time............
Prior to leaving the Apple Store: ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

Since updating firefox to 6.0.2 the addons block video use on youtube. I have few addons: blockadd+, skype click , java console, quickdrag, microsoft nf assist, Kasparsky URL adv. On the web i read i am not the only one with this problem. What to do?

as per the question above. youtube videos, whether on youtube or on FB, do not show, just a black unmoving screen. When i disable all (just some does not work, it appears) the addons the problem is solved. Issue is, i would like to keep the addons and use youtube. I see a list of plugins here below; i do not know about plugins, i have no idea if and how they influence this issue.

i tried. like i said, only when i disable all i can watch youtube. i have not checked settings of extensions but i am not an it specialist. i probably would not know what to look for.

HT1688 I updated my iphone and now my videos wont play in my car through my iphone. Am I the only one with this problem?

Did the update for my 4S a while back and now all my videos can't play in my car through the connector?
Anyone else having the same problem or is there a new button to turn this feature on and off?

Take your iPod Nano back to the Apple Store. Let them see what you are seeing. Only this time............
Prior to leaving the Apple Store: ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.***

Why the new version of itunes for windows is falling to install properly , am I the only one with this problem?

how to fix it?, i already try to install an older version, also uninstalled the whole thing and reinstalled it with no luck, and always at mid installation an error message appears saying:
I don't know what to do, not an expert at all on this things... any ideas?

Hi Shanny33,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Am I the only one with these various problems...??

Hi all,
I start my first post and introduction ever on this forum with a imposing problem with Aperture 3.03
I just did the upgrade to Aperture 3 & 3.03. Coming off Aperture 2, I was able to rotate, crop and do all the things I wanted by just placing the pointer while clicking, holding, and moving all at the same time with no issues. With Aperture 3.03, no such luck. I've noticed that now if I want to rotate an image or even crop an image the first effort to move anything is ignored. It shows all the signs of being ready to move something, but nothing happens, nothing moves on first try. If I stop the click and place click the second time it is responsive as usual....What gives???
Here is another issue. Cropping is all over the place and never right on the first try. Even if I have a set aspect ratio it does not provide me with the one I selected. I'm always getting the wrong aspect ratio even though the right one is selected. If I pick "Master Aspect Ratio", I get a variable ratio instead of a fixed ratio??? If I click again it changes again. This program is not stable!!
One other thing has anyone noticed that you cannot use the arrow keys to move from one picture to another after editing the photo?? It is happening to me. If I complete an edit and want to move to the next photo, the program will not respond to key commands in any way. I'm forced to return to Browser mode and even then it seems hit or miss whether is responds to key commands again. navigating seems to be a big impediment when actively editing.
So, am I the only one with these problems???
Lets hear your story...
Note: just installed the newest stability update for Snow Leopard/Aperture 3 just made available on August 18, 2010. No change...
Steve,
Bethlehem, Pa.
Message was edited by: hdskullfire2

I don't see any of these issues! You have listed several, disconnected issues. Perhaps you should pick one of them, and give us a blow-by-blow of your action steps.
For rotation, click that button at the bottom of the View window, and then use one of the [ or ] bracket keys as listed for direction.
Ernie

I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
I am using 2Wire Gateway modem/router from AT&T on b/g network.
I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
Please.. does anyone have a clue why this is happening?

You're definitely not the only one. I have the same issue. I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked. They finally sent me a replacement laptop. I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying. I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
My router is a Linksys E2000. I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

When actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

when actualized my iphone 4s to ios 6.0.1 music crash with or without phones. Apparently I'm not the only one with this issue

     Hi Michael! Thanks for the reply
     I live in Norway, and the phone has been either provided by a Norwegian carrier, or bought unlocked from the Norwegian Apple Store. You can check yourself by going to Settings-General-About-Model and type the model number (MC133KN in my case) here: http://iphonefrom.com/en/MC133KN But it`s unlocked, I placed a Lebara SIM in it and it works perfectly.
     If it has been carrier-locked then most(if not all) Norwegian carriers are selling the phones on a 12 months subscription contract. When the 12 months are up, the phone is being unlocked by the carrier either automatically, or upon customer`s request(depends which carrier you use).
     It`s good to hear that your 3GS works well with the iOS 6, still after having read about issues after upgrade I have a feel that the upgrade to iOS 6 may be a hit or miss.
     I read on a forum that early iPhones can only support 3 major upgrades. Can that be true?

After 10.4.8 - Am I the only one with NEW problems??

Similar Messages

Maybe you are looking for