After 10.7.5 update my macbook freezes

Its been 3 days since I updaated my MacBook Pro and ever since the raibow wheel comes on and the whole thing freezes, i tryed the pram, load in safe and v mode, i do get an error at the page: smcreaddata8 failed .
Could that be the problem? Before the update the MacBook was fine. After 3-4 hard restarts i can work for 5-10min  then i get the raibow wheel and it locks up! Not sure what to do, maybe just insert the disc that came with?
I have a late 09 MacBook Pro core 2 duo @2.53Ghz 8gb ram 500gb hd 15"
Thanks,

Yes, I have the same problem as OP after innstalling 10.5.7 on a system similar to
alecond's.
My first attempt to innstall 10.5.7 failed (combo update pakage) so firstly I assumed the update went wrong and that the buggy sleep/freezes where rooted in some files not been copied. Last night I reinstalled the update (w/o problems), but the freezes contiune.
As most posters note freezes occur on the second sleep. This has noting to do with USB or other peripherals. And on a side note I don't have Parallels or OpenVPN.
$ system_profiler SPHardwareDataType SPSoftwareDataType
Hardware:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP31.0070.B07
SMC Version (system): 1.16f10
Serial Number (system): W8743<SNIPP>
Sudden Motion Sensor:
State: Enabled
Software:
System Software Overview:
System Version: Mac OS X 10.5.7 (9J61)
Kernel Version: Darwin 9.7.0
Boot Volume: disk0s2
Boot Mode: Normal
Computer Name: KLUDgE
User Name: <SNIPP>
Time since boot: 9 minutes
Options? Back to 10.5.6 (time machine "void")? Wait for Apple to fix the problem? Or at least give us MBP-users a better way to reset our books (reset-button-petition).
So long!

Similar Messages

  • Weird behaviour from AirPort after 10.5.8 update on MacBooks

    Hi,
    I see I'm not alone with the erratic AirPort behavior I've experienced after I updated my MacBook 13" and MacBook Pro 15" to OS 10.5.8. I have several drives and printers connected to my AirPort Extreme including a drive I use for Time Machine backups. Printing works OK, but ability to connect to the drives is sporadic and Time Machine grinds away until an error message reports the backup failed because the drive could not be mounted. Tried the MacFixIt suggestions of resetting PRAM and SMC without luck. Then tried Deleting the AirPort service and installing new one. I can't recommend this as I could not get AirPort service to connect again. Currently doing a Time Machine recovery on MacBook Pro from before the 10.5.8 update. Hey, this reminds me of when I used have Windows machines. Hope Apple issues a fix soon, until then I will leave 10.5.7 installed.

    Hmmm.. unfortunately this is becoming a common problem in the 10.5.8 update. I'm having the same problem too.
    One thing I did realize is that after upgrading to 10.5.8 (regular update) my MacBook 15" 2008 started becoming really really hot. I have iStats Menu installed on my top menu bar and I started paying more attention to my CPU and Airport temperature. At some point I did notice my CPU temperature went up to a soaring 80 deg C especially after waking up from sleep.
    Long story short, I found that a possible cause of the freezing is that the latest updates from Apple automatically slowed down the CPU fan during sleep, this increases the CPU temperature which in turns causes the Macs to freeze when you try to wake it up from sleep.
    I went around and downloaded smcFanControl which allows you to regulate the min fan speed manually. I've set mine to 4000rpm and so far for the first time in weeks have not had any freezes (fingers cross). I hope this helps and until Apple fix this (which I doubt it since 10.6 is out) this is the best solution the rest of us have.
    Good Luck!
    P/s: I love Macs but seriously, Apple have to buckle up. This Mac 10.5.8 freezing problem is not an isolated case and has been reported almost throughout the Apple discussion board. I expect a better update from Apple next time.

  • Problems after efi 2.5 update on macbook pro 13 inch(mid 2010)

    i don't know if it's related but after i updated my macbook pro 13 inch mid 2010 efi firmware to 2.5 i'm having usb problems.
    the problem started after i went to software updates and downloaded efi firmware 2.5, but i didn't restarted right away actually i downloaded the efi firmware around 3pm and shut down my computer around 1am, and in the morning when i turned on my mac it made a strange noise and then restarted. then when it restarted my usb external hd wasn't working well, it takes around 10 minutes for me to be able to watch a video directly from it, and my 3g usb connects but the speed is really slow, so i cant use it. i don't know if efi firmware update is related to usb, but somehow it made my usb ports stoped working properly.
    so is there a fix for this?

    What you should do is time consuming but really helps (it helped for me)
    Go to your disk utility setup and select your harddisk drive, then click on verify disk permissions and after that repair disk permissions, don't ask me why it runs in this order but it seems to elliminate the cause. you will most probably see some repairs being listed.
    the next step is to "repair disk" procedure, allthough it could be possible that it can not and then it will tell you to use your setup disk that came with the computer, insert disk hold command and "R" at same time and you come into the menu to repair or re istal software etc.
    I ran the repair mode, then re installed my operating software and it seem to resolve this issue but also the long start up problems.
    good luck

  • Mouse sitcking after 10.6.3 update on macbook pro

    After installing the 10.6.3 update on my macbook pro, when browsing the net in safari, quite often, the mouse just seems to stick.
    wondering if anyone else has had this issue, or knows a resolution??
    in terms of spec my macbook pro is a 2.5ghz penryn, non unibody model
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.5 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 6 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B00
    SMC Version (system): 1.27f2

    has anyone got any ideas with this? the issue is still there and does it most when browsing using safari

  • After installing latest quicktime update CPU lags/freezes

    After just installing the latest quicktime update through my apple software my cpu has had extra strain - hearing the fan going on constantly... it started freezing and getting ridiculous. I uninstalled quicktime and it is perfectly fine, this doesnt fix the problem however as I can't run itunes without quicktime... anyone else having this problem or have a way to get around it?

    *An update*
    I have found an ad hoc solution to this problem. I found that I did not calibrate my battery for a long time. Coconut battery showed my current battery capacity to be at 88%. So, I calibrated my battery. After a restart, I found that the battery capacity had increased to 91% and the fan noise had stopped.
    The machine is running for over two hours after the calibration and I haven't yet heard that noise. I shall run the machine for few more hours and see whether the sound reappears.
    Clearly, if this is a solution, it is ad hoc. If somebody can come up with an analytic solution, that will be great. My hunch was that the fan speed is somewhat tied with the battery capacity in some indirect manner.
    Message was edited by: mssm72

  • After today's security update, my macbook pro is failing to boot: error 19

    Update 2012-002 on macbook pro. When rebooting,after 'successful' install, I now see a repeating cycle of Error = 19, unable to mount root. From my *nix perspective I fear the worst - that the boot sector (at a minimum) is hosed. I tried  (running Lion 10.7.x) booting with the command key down - no joy. do not currently have my install disk (sadly, it's in storage, somewhere).
    I'm concerned about this. this is VERY unusual for an update. This is a relatively new drive (750GB drive installed about 8 months ago). At no point have I seen errors, and believe me, I look.
    Assuming the worst case is repartitioning? (ah for hte days of 'fdisk /mbr')

    yes. Apologies for being unclear. command--R does nothing but report the same error (note, I have verbose boot enabled).I was an apple tech long ago, I tried myriad key options, just for grins.
    Shift key while powering up will bring the expected 'grey' background, with the dark grey apple. After a period of searching, the apple is replaced by the 'no sign'.
    an addendum: I believe I know where the issue is, and while I cannot nail it, it's quite likely it is because of a failed filevault2 startup. I went through the process of enabling filevault2, got the key, restarted and when I went to look at the progress of the encryption - it had not 'taken'. I was at the option to enable it again. I didn't think much of that at the time (though I know from working in the past with full drive encryption) that the reboot was invovling a rewrite of the boot sector. However it DID reboot, and more than once. I was able to use the system for a couple of weeks, until today's update. I personally don't feel it had to do with the security update - more it had to do with the failed filevault2 enabling.

  • Iwork 09 (numbers) keep crashing after installing 9.3 update on Macbook retina and Yosemite os.

    I have tried clean install of OS X yosemite, on Macbook pro 12 Retina, Clean Install of iWork 09 from retail DVD. Everything work at this point but, all fonts texts and graphics appear in very low resolution.   As soon as I apply iWork 9.3 update, all appears in high res as it should.  But, now, when i try to print from Numbers, Numbers crashes.   It happens while printing to printer or creating a pdf. 
    please help.  it is really annoying and my livelihood depends on iWork 09 working. 

    According to this:
    About the iWork 9.3 Update - Apple Support
    the only thing this update adds is support for iWork for  iOS devices - is that why you are wanting to install it?
    And, since you installed from a DVD, did you try the stand alone installer here?
    iWork 9.3

  • Macbook freezes randomly on Playback in Garageband

    After the last Garageband update, my Macbook freezes (Mouse cursor still movable, graphics frozen, keyboard not working, sound still playing) on playback. The project has a quicktime movie (soundtrack project) in it. I already tried different compression modes (JPEG, H-264) for the movie, but that didn't help.
    The project worked just fine before the last update. Since then I also updated to the latest perian version. But should that stop the whole computer?
    The only way to quit ist forced shutdown.
    Thanks in advance for any help.

    Thanks for your reply. But all the things mentioned there didn't describe my problem (complete system hang).
    I just reverted back to Garageband before the last Update with Time Machine: and it seems to work! I hope Apple fixes whatever is wrong there. Maybe I should have used the downloadable update instead of "Software Update"?!
    Glad that it's working again, as I need to finish a project...

  • Macbook takes longer time to launch & log in after 10.6.4 update

    After 10.6.4 update,
    my macbook took quite a long time to launch the log-in screen page.
    Not only that, upon logging in, the dock, icons & toolbars took long than usual to appear as well.
    Though, it's just a minor problem, but anyone else is experiencing this problem?

    I have experienced slow loading time even after a reboot with 10.6.4.
    Additionally, Flash programs are not loading in my Safari 5; experienced problems accessing my new phone upgrade options on the Verizon wireless website and some games will not load.
    Also when I mouse over drop down menus on the Verizon wireless website, the screen appears to bulge before returning to a "normal" view.
    I'm ready to backtrack to 10.6.3 and Safari 4!!!

  • After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • After Update Mac OS 10.6.5 my macbook freeze

    Immediately after updated to release 10.6.5 I encountered the following problem that occurs at least 3-4 votle day and apparently when I put my Macbook Pro under stress (quickly move windows, view many youtube videos, and any kind of excessive load on the machine): the screen freezes with all the windows blocked, and I can only move the the mouse cursor. To solve the problem I turn off the machine while holding down the power button!
    The Apple Hardware Test found no hardware problem and it is strange that these problems occurred immediately after upgrading the operating system.
    Please, How can I fix this? Does anyone have my same problem?
    Thanks!

    Do you think it's a hardware problem?
    I don't think because it's occured immediately after the update and because it's the same problem of these threads:
    - System Freezes Randomly after 10.6.3 Update (http://discussions.apple.com/thread.jspa?threadID=2383288&tstart=30)
    - System freezes after 10.6.5 update (http://discussions.apple.com/thread.jspa?threadID=2650373&tstart=0)
    - 10.6.5, Has the new update resolved the random freeze issue (http://discussions.apple.com/thread.jspa?threadID=2645209&tstart=15)

  • After updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid

    after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm

    Hi Buterem,
    I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
    How to use Activity Monitor - Apple Support
    If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Regards,
    - Brenden

  • Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also

    Whenever i try to update my macbook pro, it downloads then says I need to restart my computer. I restart the computer, and everything just freezes. When my computer eventually turns back on, its not updated. other apps i try to download dont download also

    First, do the following:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    When you complete the above re-download your OS X upgrade (not sure which one that is, but I assume Mavericks.) After the download is completed re-install it. Hopefully, this time it will do what you expect.

  • Irda in MacBook Pro not work after 10.5.1 update

    Hello.
    I have one problem after i install the update for Leopard 10.5.1. The Irda from the MacBook Pro no respond to the little remote control of my Mac. I check the battery and is good.
    What i must do now?
    Thanks

    You need to perform an Archive & Install of Mac OS X followed by reinstalling other updates applied to that system to uninstall the Mac OS X 10.49 update.
    (20510)

  • My mid-2011 MacBook Air bricks itself after 10.7.2 update

    I have a new MacBook Air (11") that was working just great, until today.  Today, I used Software Update to install the updates, which included 10.7.2 as well as the recue partition update.
    I did everything you're supposed to do, and when it rebooted, the gray screen comes up, and it shows the spinny doohickey on the bottom showing that it's working.  Then, suddenly, up pops a big "no" icon (the circle with the slash through it) after about 60 seconds.
    It simply doesn't do anything after that.
    Hard-power-off, wait, power-on, repeat, same thing.
    So I reboot with cmd-R to get the rescue partition. It works fine; I ask it to re-install Mac OS X, which then takes about 45 minutes (argh).  Finally, Mac OS X is back, the machine is nicely booted up, all my files are there, everything is good.. But of course, the reinstall took me back to 10.7.1.
    All I want to do is upgrade my fricking iPhone to IOS 5.0, but I can't do that without knowing I can sync which requires iCloud which of course requires 10.7.2.  So I *have* to re-do the upgrade.
    Back to Software Update, back to installing 10.7.2. And .. 20 minutes later .. back to bricked MacBook Air.
    What a waste of my time. What a failure, Apple. I'm very very very very very unhappy that I've wasted so much time just to update my damned iPhone to IOS 5. I'm still without an update. Now I'm trying to figure out how to move my iTunes to another machine -- not nearly as obvious as it should be.  ARGH. I'm going to throw this MacBook Air off the balcony in about 10 minutes. :-(
    Thanks for listening.
      Steve

    Wow, you're right -- I can't believe it. I just really can't believe they would screw up so badly, yet when I search for "10.7.2 filevault" I don't find more than a couple of articles about it on the web (including this thread). Why on earth wouldn't Apple have put up some kind of warning about this? I can't believe it, really. It's insane.
    On my newly-functional 10.7.2 MBA, I wanted to test your theory and so I turned on filevault 2 and encrypted the main disk again.  It of course wanted me to reboot. So I rebooted. And *blammy* -- same error / boot failure.  Wow.  Also, interestingly, even on a working 10.7.2 system, you can't mount a USB drive that was encrypted using Filevault 2 encryption (in Disk Utility, e.g., as a "Mac OS X, journalled, encrypted" volume that was encrypted with DiskUtility on Lion 10.7.1).  I still have a 10.7.1 machine that I will not upgrade until I can at least decrypt the disk -- but right now, Disk Utility tells me it fails decrypting the external USB disk so I'm hosed!!! ARGH.
    Now, going back to the booting problem after upgrade -- for anyone's reference who's still keeping score -- you can easily recover from the booting problem with upgrading a Filevault 2 root drive: Power-cycle the machine and then hold down cmd-r to bring up the Lion Recovery application.  Within Lion Recovery, choose "Disk Utility", and then click on the (as yet unmounted, still encrypted) root hard drive to select it. Then go to the File menu, and choose "Turn off encryption" for this disk.  It then prompts you for the password, and if you enter it, *blammy* you're back up and running again.
    In my case, the disk had only just begun encrypting so the action was instant, and then once it confirmed the disk was now decrypted, I simply chose "Restart" from the Apple menu, and I was back in business (no hairy re-installs to deal with).  If this is an already-encrypted volume, presumably it'll take you a bit longer (the normal 45-minutes to 2 hours) to decrypt it.  But at least no more installing software -- it'll "just work".
    Maybe I'll go post a simpler version of these instructinos on the other threads, but this is the simplest fix -- just turn off filevault 2 from within Lion Recovery, basically, and that fixes the boot problems.
    Apple, if you're listening, you really really really need to say something to your users so they know. Many many many MBA users are likely to have still not upgraded. You can prevent them from hating you and your products by making sure they don't screw the pooch here.  Short version: Mid-2011 MacBook Airs running Filevault 2 WILL NOT BOOT after 10.7.2 update; so users should turn off Filevault2 before upgrading.
      Steve

Maybe you are looking for