After a system restart i cannot connect to SAP with SAPGUI.

After a system restart i cannot connect to SAP with SAPGUI.
See attached log "dev_disp" and "dev_w0"
At the end of this message you can see the comparison between the
defective system and another working system
I notice the absence of the "IGS400" process
Could you please help me ?
Best regards to everybody.
"dev_disp" log file tell me : ************************
trc file: "dev_disp", trc level: 1, release: "640"
Thu Jun 21 13:21:24 2007
kernel runs with dp version 132(ext=102) (@(#) DPLIB-INT-VERSION-132)
length of sys_adm_ext is 312 bytes
sysno      00
sid        SVI
systemid   324 (IBM iSeries with OS400)
relno      6400
patchlevel 0
patchno    147
intno      20020600
make:      single threaded, ASCII, 64 bit
pid        380
Thu Jun 21 13:21:27 2007
***LOG Q00=> DpSapEnvInit, DPStart (00 380) [dpxxdisp.c   1100]
     shared lib "dw_xml.so" version 147 successfully loaded
     shared lib "dw_xtc.so" version 147 successfully loaded
     shared lib "dw_stl.so" version 147 successfully loaded
     shared lib "dw_gui.so" version 147 successfully loaded
     shared lib "dw_mdm.so" version 147 successfully loaded
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >FRASTEST_SVI_00                         <
DpShMCreate: sizeof(wp_adm)          10712     (824)
DpShMCreate: sizeof(tm_adm)          3021432     (15032)
DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)          216000     (432)
DpShMCreate: sizeof(vmc_adm)          0     (448)
DpShMCreate: sizeof(wall_adm)          (22440/36712/56/104)
Thu Jun 21 13:21:28 2007
DpShMCreate: SHM_DP_ADM_KEY          (addr: 700000080000000, size: 3337656)
DpShMCreate: allocated sys_adm at 700000080000000
DpShMCreate: allocated wp_adm at 700000080001830
DpShMCreate: allocated tm_adm_list at 700000080004208
DpShMCreate: allocated tm_adm at 700000080004230
DpShMCreate: allocated wp_ca_adm at 7000000802e5ca8
DpShMCreate: allocated appc_ca_adm at 7000000802ea2f8
DpShMCreate: allocated comm_adm_list at 7000000802eba68
DpShMCreate: allocated comm_adm at 7000000802eba80
DpShMCreate: allocated vmc_adm_list at 700000080320640
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 700000080320668
DpShMCreate: allocated wall_adm at 700000080320670
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Thu Jun 21 13:21:29 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
EsIUnamFileMapInit: ES base = 0x7000000d0000000
EsStdInit: Extended Memory 4096 MB allocated
<ES> 1023 blocks reserved for free list.
ES initialized.
Thu Jun 21 13:22:33 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
Thu Jun 21 13:22:35 2007
***LOG Q0K=> DpMsAttach, mscon ( FRASTEST) [dpxxdisp.c   10036]
Thu Jun 21 13:22:36 2007
DpStartStopMsg: send start message (myname is >FRASTEST_SVI_00                         <)
DpStartStopMsg: start msg sent
Thu Jun 21 13:22:47 2007
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Jun 21 13:22:49 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1025]
DpMsgAdmin: Set patchno for this platform to 147
Release check o.K.
Thu Jun 21 13:39:13 2007
DpSigInt: caught signal 2
DpHalt: shutdown server >FRASTEST_SVI_00                         < (normal)
Thu Jun 21 13:39:14 2007
***LOG Q0I=> NiPWrite: writev (32: Broken pipe) [niuxi.c 1140]
ERROR => MsINiWrite: NiBufSend (rc=NIECONN_BROKEN) [msxxi.c      2455]
ERROR => MsIModState: MsINiWrite (rc=NIECONN_BROKEN) [msxxi.c      3695]
MBUF state OFF
MBUF component DOWN
DpModState: change server state from STARTING to SHUTDOWN
Thu Jun 21 13:39:15 2007
Stop work processes...
Thu Jun 21 13:40:18 2007
ERROR => DpWpKill(411, SIGUSR2): kill failed [dpxxtool.c   2462]
Stop gateway
Stop icman
Terminate gui connections
waiting for termination of work processes
Thu Jun 21 13:40:19 2007
waiting for termination of work processes
Thu Jun 21 13:40:20 2007
waiting for termination of work processes
Thu Jun 21 13:40:21 2007
waiting for termination of work processes
"dev_w0" log file tell me : ************************
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      00
M sid        SVI
M systemid   324 (IBM iSeries with OS400)
M relno      6400
M patchlevel 0
M patchno    147
M intno      20020600
M make:      single threaded, ASCII, 64 bit
M pid        404
M
M
M Thu Jun 21 13:22:00 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 404) [thxxhead.c   1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jun 21 13:22:11 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C
C Thu Jun 21 13:22:13 2007
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = SVI
C     Character encoding          = ASCII
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = FRASTEST
C     dbhost                      = FRASTEST
C     rdbname                     =
C     dbname                      = SVIFRASTEST
C     dblib                       = R3SVIDATA
C     application server          = DVEBMGS00
C     Connect type                = LOCAL
C     pid                         = 404
C     dbjobname                   = WP00
C     dbjobuser                   = SVI00
C     dbjobno                     = 025901
C     wpjobname                   = WP00
C     wpjobuser                   = SVI00
C     wpjobno                     = 025901
C     DB2/400 vers. appl. server = PASE 4
C     DB2/400 vers. DB server     = V5R4
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = off
C     allow_cancel                = OFF
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     query_compl_reval           = O
C     nte_list_size               = 10
C -
C
C Thu Jun 21 13:22:17 2007
C SQL monitor started for job
B
B Thu Jun 21 13:22:18 2007
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070621 132200 FRASTEST
M
M Thu Jun 21 13:22:37 2007
M db_connect o.k.
M
M Thu Jun 21 13:22:38 2007
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
ACTIVE TRACE LEVEL           2
ACTIVE TRACE COMPONENTS      all, M
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009ED34587C2E94220
=> Stack address = 0xffffffffffff3f0
=> Stack low     = 0xfffffffffffdb30
=> Stack high    = 0xffffffffffffa90
=> Stack Trace:
     Unknown at 0x3618
     sleepms() at 0x1000f9324
     SpinLockSemRq1() at 0x1000f926c
     SemRq() at 0x1000fcf6c
     ThIPCInit() at 0x1000ac1a0
     tskh_init() at 0x1000ad704
     tskhstart() at 0x1000c0950
     DpMain() at 0x10175ad2c
     nlsui_main() at 0x10172dee8
=> CPU Registers:
     msr = 0x800000000000f032     iar = 0x0000000000003618
     ctr = 0x0000000000003610      lr = 0x09000000000a2890
     xer = 0x0000000008000000      cr = 0x000000002a404445
     r00 = 0x0000000000000000     r01 = 0x0ffffffffffff3f0
     r02 = 0x00000000000000a4     r03 = 0xffffffffffffffff
     r04 = 0x0000000000000000     r05 = 0x0000000000000000
     r06 = 0x0000000000000000     r07 = 0x0ffffffffffff520
     r08 = 0x0000000000000001     r09 = 0x0000000010108003
     r10 = 0xb00010000c90e000     r11 = 0xb00010000c90ef30
     r12 = 0x0900000000001eb0     r13 = 0x0000000182784a50
     r14 = 0x0000000000000002     r15 = 0x00000001810e6c48
     r16 = 0x0ffffffffffffb28     r17 = 0x000000018001bf20
     r18 = 0x0000000000000003     r19 = 0x0000000000000004
     r20 = 0x0000000180c6de34     r21 = 0x0000000180c6de28
     r22 = 0x000000018004ce60     r23 = 0x0000000180c6e244
     r24 = 0x0000000000000064     r25 = 0x0000000000000158
     r26 = 0x0000000000000158     r27 = 0x0000000000000000
     r28 = 0x0000000000000000     r29 = 0x0fffffffffffffe0
     r30 = 0x09001000a005ec48     r31 = 0x0000000000000000
Thu Jun 21 13:40:23 2007
Library   |(SRV)PGM |Module    |Function/Statement No.
Thu Jun 21 13:40:24 2007
|--||--
QSYS      |QP2USER2 |QP2API    |__Qp2Fork 8
QSYS      |QP2USER2 |QP2API    |runpase_main__FPi 6
QSYS      |QP2USER2 |QP2API    |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
ACTIVE JOBS OF DEFECTIVE SYSTEM
Opz Sottosis/Lav corrente    Tipo % CPU Funzione        Stato
      R3_00         QSYS        SBS     0,0                  DEQW
        DISP_WORK   SVI00       BCI     5,3 PGM-disp+work   CNDW
        GWRD        SVI00       BCI    10,9 PGM-gwrd        RUN
        ICMAN       SVI00       BCI     1,8 PGM-icman       RUN
        MSG_SERVER SVI00       BCI     0,0 PGM-MSG_SERVER SELW
        RSLGCOLL    SVI00       BCI     0,0 PGM-rslgcoll    SELW
        RSLGSEND    SVI00       BCI     0,0 PGM-rslgsend    SELW
        SAPOSCOL    SVI00       BCI     1,0 PGM-SAPOSCOL    RUN
        SAPSTART    SVI00       BCH     0,0 PGM-sapstart    EVTW
        WATCHDOG    SVI00       BCI     0,4 PGM-disp+work   SELW
        WP00        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP01        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP02        SVI00       BCI     1,0 PGM-disp+work   RUN
        WP03        SVI00       BCI     1,1 PGM-disp+work   RUN
        WP04        SVI00       BCI     0,9 PGM-disp+work   RUN
        WP05        SVI00       BCI     0,9 PGM-disp+work   RUN
        WP06        SVI00       BCI     0,8 PGM-disp+work   RUN
        WP07        SVI00       BCI     0,6 PGM-disp+work   RUN
        WP08        SVI00       BCI     0,0                  RUN
ACTIVE JOBS OF WORKING SYSTEM
      R3_03         QSYS        SBS     0,0                  DEQW
        DISP_WORK   TST03       BCI     0,0 PGM-disp+work   SELW
        GWRD        TST03       BCI     0,0 PGM-gwrd        SELW
        ICMAN       TST03       BCI     0,0 PGM-icman       SELW
        IGS400      TST03       BCI     0,0 PGM-igswd_mt    THDW
        IGS400      TST03       BCI     0,0 PGM-igsmux_mt   THDW
        IGS400      TST03       BCI     0,0 PGM-igspw_mt    THDW
        IGS400      TST03       BCI     0,0 PGM-igspw_mt    THDW
        MSG_SERVER TST03       BCI     0,0 PGM-MSG_SERVER SELW
        RSLGSEND    TST03       BCI     0,0 PGM-rslgsend    THDW
        SAPSTART    TST03       BCH     0,0 PGM-sapstart    EVTW
        WATCHDOG    TST03       BCI     0,0 PGM-disp+work   SELW
        WP00        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP01        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP02        TST03       BCI     2,5 PGM-disp+work   RUN
        WP03        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP04        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP05        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP06        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP07        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP08        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP09        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP10        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP11        TST03       BCI     0,0 PGM-disp+work   SEMW
        WP12        TST03       BCI     0,0 PGM-disp+work   SEMW

Following your suggestions i got this error message in the log file "dev_w0"
This process creted also a very big "core" file
B ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
Here is the complete log:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
M sysno      00
M sid        SVI
M systemid   324 (IBM iSeries with OS400)
M relno      6400
M patchlevel 0
M patchno    147
M intno      20020600
M make:      single threaded, ASCII, 64 bit
M pid        317
M
M
M Wed Aug 1 17:53:03 2007
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 317) [thxxhead.c   1146]
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Wed Aug 1 17:53:05 2007
C R3INLPGM: RmtExeLib from /usr/sap/SVI/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is R3640ASVI
C Connection to database done without problems.
C -
C -
DbSl EGO Structure
C -
C     SAPSYSTEMNAME               = SVI
C     Character encoding          = ASCII
C     process class               = dialog process
C     workprocess id              = 0
C     local host                  = FRASTEST
C     dbhost                      = FRASTEST
C     rdbname                     =
C     dbname                      = SVIFRASTEST
C     dblib                       = R3SVIDATA
C     application server          = DVEBMGS00
C     Connect type                = LOCAL
C     pid                         = 317
C     dbjobname                   = WP00
C     dbjobuser                   = SVI00
C     dbjobno                     = 028178
C     wpjobname                   = WP00
C     wpjobuser                   = SVI00
C     wpjobno                     = 028178
C     DB2/400 vers. appl. server = PASE 4
C     DB2/400 vers. DB server     = V5R4
C     da_cache_size               = 100
C     reopen                      = ON
C     timeout_retry               = 3
C     ODP threshold               = 800
C     ODP commit thresh.          = 810
C     ODP open thresh.            = 850
C     QAQQINI library             = Default (QUSRSYS)
C     Alternate QAQQINI library   = Not specified
C     use_lobs_for_long           = ON
C     use_lobs_for_short          = OFF
C     single_execution_threshold = 2000
C     single_execution_reuse      = OFF
C     keep_tmp_SQLpkgs            = OFF
C     dbsl_trace                  = off
C     allow_cancel                = OFF
C     nqe_optimize_method         = O - All I/O (compatibility mode)
C     query_compl_reval           = O
C     nte_list_size               = 10
C -
C
C Wed Aug 1 17:53:09 2007
C SQL monitor started for job
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070801 175303 FRASTEST
M
M Wed Aug 1 17:53:12 2007
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 1 17:53:13 2007
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: 700000200000000, size: 4400128)
M
M Wed Aug 1 17:53:14 2007
M SHM_ROLL_AREA          (addr: 700000210000000, size: 268435456)
M
M Wed Aug 1 17:53:15 2007
M SHM_PAGING_AREA          (addr: 700000220000000, size: 67108864)
M SHM_ROLL_ADM               (addr: 700000230000000, size: 2672386)
M SHM_PAGING_ADM          (addr: 700000240000000, size: 164896)
M
M Wed Aug 1 17:53:16 2007
M ThCreateNoBuffer          allocated 324144 bytes for 1000 entries at 700000250000000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at 700000260000000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
X ES initialized.
B
B Wed Aug 1 17:53:20 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B
B Wed Aug 1 17:53:25 2007
B dbtbxbuf: Buffer TABL (addr: 7000002d0000100, size: 64000000, end: 7000002d3d09100)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 31427136
B ***LOG BB0=> buffer TABL       started with length 64000000   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B
B Wed Aug 1 17:53:26 2007
B dbtbxbuf: Buffer TABLP (addr: 7000002e0000100, size: 16776192, end: 7000002e0fffd00)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 8322944
B ***LOG BB0=> buffer TABLP      started with length 16776192   bytes [dbtbxbuf#8 @ 16037] [dbtbxbuf1603 7]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: Opening /usr/sap/SVI/DVEBMGS00/data/tbxnew failed (No such file or directory).
B dbtbxbuf: Renaming /usr/sap/SVI/DVEBMGS00/data/tbxnew to /usr/sap/SVI/DVEBMGS00/data/tbxstat failed (No such file or directory).
B dbtbxbuf: 110 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 8009 * 40 = 320360
B 4: 4000 * 160 = 640000
B 5: 8009 * 8 = 64072
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 319664 * 128 = 40916992
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 700000300000108, size: 41943040, end: 700000302800108)
B ***LOG BB0=> buffer EIBUF      started with length 40960k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28755 * 128 = 3680640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: 700000310000108, size: 4194304, end: 700000310400108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 16411 * 40 = 656440
B 4: 8191 * 160 = 1310560
B 5: 16411 * 8 = 131288
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 57325 * 256 = 14675200
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: 700000320000108, size: 16776192, end: 700000320fffd08)
B ***LOG BB0=> buffer CUA        started with length 16383k     bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 360 = 360
B 2: 13 * 40 = 520
B 3: 4001 * 40 = 160040
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28754 * 128 = 3680512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B
B Wed Aug 1 17:53:27 2007
B dbexpbuf: Buffer OTR   (addr: 700000330000108, size: 4194304, end: 700000330400108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#6 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#2 @ 2212] [dbcalbuf2212 ]
C
C Wed Aug 1 17:53:29 2007
C *** ERROR => Error 304 in function db_fetch
[dbsldb4.cpp 9041]
C === DBSL Begin of SQL request after execution ===
C === DBSL SQLP0400 ===
C Function              5
C Package               DDNTFIH             Library               R3SVIA2062
C Main_Pgm                                  Main_Lib
C Statement_Name        "Wx3AAADpDB"        Cursor_Name           "CADDNTF16461"
C Open_Options          x80                 Clause_For_Describe   N
C Commitment_Control    C
C Date_Format           USA                 Date_Separator        /
C Time_Format           USA                 Time_Separator        :
C Naming_Option         SYS                 Decimal_Point         .
C Blocking_Factor       1                   Scrollable_Option     0
C Position_Option       0                   Relative_Record       0
C Rows_To_Insert        0                   Direct_Map            N
C Reuse_DA              N                   Name_Check            Y
C Use_Ptrs              0                   With_Hold             N
C Close_File_Name                           Close_Library_Name    *THRESHOLD
C Reopen                0                   Use_Perf              1
C Query_Compl. (Reval) !                   Statement_Text_CCSID 819
C Sort_Sequence_Table   *JOB                Sort_Sequence_Library *LIBL
C Language_ID           *JOB                Allow_Copy_Data       S
C Allow_Blocking        L
C === DBSL SQLDA ===
C sqldaid: SQLDA 2 , sqldabc: 816, sqln: 10, sqld: 4
C === TRACE VAR 0 ===
C sqlvar: 0, sqtype 469, sqllen 30, sqlname.data 13488
C sqlind: 0
C sqlname (hex):
C 0008000034B00000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 005400430041004C 0053002000200020 0020002000200020 0020002000200020
C 0020002000200020 0020002000200020 0020002000200020 00200020
C === TRACE VAR 1 ===
C sqlvar: 1, sqtype 501, sqllen 2, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000
C === TRACE VAR 2 ===
C sqlvar: 2, sqtype 497, sqllen 4, sqlname.data 0
C sqlind: -2
C sqlname (hex):
C 0000000000000000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 00000031
C === TRACE VAR 3 ===
C sqlvar: 3, sqtype 405, sqllonglen 32700
C sqldatalen NULL
C sqlind: 0
C sqlname (hex):
C 00080000FFFF0000 0000000000000000 0000000000000000 0000000000000000
C sqldata row=0 (hex):
C 0000028742000007 4100000000010000 0000280001000000 0100010000004944
C 0000000000000000 0000000000000000 0000000000000000 00000000004B4142
C === DBSL errc ===
C errc: OK
C === DBSL sqlca ===
C sqlcode: 304
C sqlerrml: 68, sqlerrmc:
C 00035CD540404040 4040404040404040 4040404040404040 4040404040404040
C 4040404040404040 4040404040404040 4040404040404040 4040404040404040
C 40400006
B ***LOG BY4=> sql error 304    performing FET on table DDNTF      [dbntab#7 @ 10281] [dbntab 1028 1]
B ***LOG BY0=> Conversion error in assignment to host variable *N. MSGID= Job=028178/SVI00/WP00 [dbntab#7 @ 10281] [dbntab 1028 1]
B *** ERROR => missing return code handler
caller does not handle code 1 from dbntab#7[3098]
==> calling sap_dext to abort transaction
[dbeh.c       93]
M -
C-STACK -
=> 64 bit R/3 Kernel
=> 64 bit OS400 Kernel
=> Heap limit      = unlimited
=> Stack limit     = unlimited
=> Core limit      = unlimited
=> File size limit = unlimited
=> Heap address = 0x40000000000000009E570787C2ED4260
=> Stack address = 0xfffffffffffd6f0
=> Stack low     = 0xfffffffffffd6f0
=> Stack high    = 0xffffffffffffa90
=> Stack Trace:
     AixStack() at 0x10008d040
     CTrcStack2() at 0x10008d138
     ThControl() at 0x1006551a4
     dyThControl() at 0x1003ab070
     dextIntern() at 0x1003aa06c
     sap_dext() at 0x1003aff24
     dbeh_exit() at 0x100416924
     db_ntab() at 0x10039d48c
     read_ntab() at 0x101512474
     db_cbufload() at 0x10150f40c
     reset_handling() at 0x101512f00
     init_shm_and_load_cals() at 0x10151394c
     db_cbufinst() at 0x101514c48
     db_calinit() at 0x1005ae8bc
     db_init() at 0x1001c7ae0
     ThCallHooks() at 0x1000c3654
     ThIPCInit() at 0x1000ac574
     tskh_init() at 0x1000ad704
     tskhstart() at 0x1000c0950
     DpMain() at 0x10175ad2c
     nlsui_main() at 0x10172dee8
Wed Aug 1 17:53:29 2007
Library   |(SRV)PGM |Module    |Function/Statement No.
|--||--
QSYS      |QP2USER2 |QP2API    |__Qp2Fork 8
QSYS      |QP2USER2 |QP2API    |runpase_main__FPi 6
QSYS      |QP2USER2 |QP2API    |runpase_common__FiPvT2 2
R3640ASVI |O4PRTLIBC |AS4STACK |As4Stack_From_PASE 3
R3640ASVI |O4PRTLIBC |AS4STACK |As4StackOut 10
R3640ASVI |O4PRTLIBC |AS4STACK |_MATINVS2__8O4_StackFv 8
M -
M ***LOG R1B=> ThControl, sap_dext-call (00 ) [thxxdynp.c   355]
M in_ThErrHandle: 1
M *** ERROR => ThControl: illegal sap_dext call !!! (step 1, th_errno 5, action 1, level 1) [thxxhead.c   9564]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M Entering ThSetStatError
M Entering ThReadDetachMode
M ThISend: still inside critical section semaphore ?

Similar Messages

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in, but after accepting the call we cannot connect. No voice, no video.

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect. No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection What's up?

I am curious if possibly the hotel has some sort of VOIP block on. Have you tried Skype? Did you talk to the hotel staff? My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue. He has had no problems from Istanbul but he is staying in a corporate apartment there. If you find an answer please post back. Thanks

After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.

After iOS6 update, It says cannot connect to iTunes Store when I try to go to the app store.
How do I fix this on my iPhone 4S?

Same phone and ios, same problem. Worked just fine for me Sunday, but nothing today, all day. As a workaround I found I can still connect using iTunes on my Macbook Pro, the I synch my iPhone. There are way too many people with the same problem for it to be anything but Apples problem. Hope this helps.

After upgrading to Lion I cannot rewrite CD-RW with my Superdrive. I'm on an iMac24 10.7.1s

After upgrading to Lion I cannot rewrite CD-RW with my Superdrive. I'm on an iMac24 10.7.1

Might be corrupted audio preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ...

Cannot connect to SAP R/3 (datastore RD_110 using host n1.n2.n3.n4 , cli

We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
BODI is installed on Solaris and R/3 is on Aix.
Any help with this would be greatly appreciated.
Thanks

We use Business Objects Data Integrator 6.5 to connect to SAP R/3 system to generate ABAP extracts and load these extracts into a custom Oracle database. The current production R/3 system is in 4.6. We are planning to upgrade the R/3 system to ECC 6.0 and currently testing our interface from BODI 6.5 to R/3 6.0. We were able to successfully create a data store point to R/3. However when we execute a job, we get the following error
Cannot connect to SAP R/3 (datastore <dsname> using host <host ip>, client <cl#>, user <uname>, and system number <0>. Please make sure the SAP R/3 server is running and login information is correct.
The same login info was used to connect SAP GUI and it is working and we are able to execute the ABAP extractors. We have also tried running the RFC_GENERATE_AND_EXECUTE_ABAP function and it is executing as well.
BODI is installed on Solaris and R/3 is on Aix.
Any help with this would be greatly appreciated.
Thanks

Cannot connect Service Manager with Orchestrator Web Service URL

Dear TechNet User,
i cannot connect my service manager console with my Orchestrator Webservice. i try to connect to "http://AMSCO01:81/Orchestrator.svc" ... the user i´ve choose is local admin on the orchestrator Machine.
Thats the Logfile:
Date: 07.10.2013 15:23:16
Application: System Center Service Manager
Application Version: 7.5.2905.0
Severity: Error
Message: Could not connect to the Orchestrator web service.
System.Data.Services.Client.DataServiceQueryException: An error occurred while processing this request. ---> System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   --- End of inner exception stack trace ---
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
   at System.Data.Services.Client.DataServiceQuery`1.Execute()
   at System.Data.Services.Client.DataServiceQuery`1.GetEnumerator()
   at Microsoft.EnterpriseManagement.ServiceManager.Sdk.Connectors.OrchestratorRunbookConnector.GetRunbookFolders(OrchestratorContext scoContext, Folder parentFolder)
   at Microsoft.EnterpriseManagement.ServiceManager.UI.Administration.Connectors.Orchestrator.OrchestratorConnectorHelper.ValidateServerConnection(Boolean found)
System.Data.Services.Client.DataServiceClientException: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"/>
<title>404 - File or directory not found.</title>
<style type="text/css">

</style>
</head>
<body>
<div id="header"><h1>Server Error</h1></div>
<div id="content">
<div class="content-container"><fieldset>
<h2>404 - File or directory not found.</h2>
<h3>The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.</h3>
</fieldset></div>
</div>
</body>
</html>
   at System.Data.Services.Client.QueryResult.Execute()
   at System.Data.Services.Client.DataServiceRequest.Execute[TElement](DataServiceContext context, QueryComponents queryComponents)
any ideas? Thank you very much!

Hi,
I am unable to connect to
http://hostname:81/Orchestrator2012/Orchestrator.svc/ in IE and am getting the same error while creating the connector.
I can connect to orchestrator via http://hostname:81/ but it still gives me the same error when I create the connector (Cannot connect Service Manager with Orchestrator Web Service).
anyone seen it before?

HT204053 i cannot connect the icloud with my Imac

i cannot connect the icloud with my Imac

Go to System Preference and click 'iCloud'. Then, just login with your apple account and click on items you want to activate. (like mail, notes, and photo stream)

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

Cannot connect to Host with user name J2EE_ADMIN !!!

Hi all,
this exception when deploy from NWDS04s:
<i><b>Caught exception while checking the login credentials for SAP J2EE Engine. Cannot connect to Host with user name J2EE_ADMIN</b></i>
Complete exception:
<i>Result
=> deployment aborted : file:/D:/DOCUME1/VITO1.PAL/LOCALS~1/Temp/temp23237GivaudanNavigation.ear
Aborted: development component 'GivaudanNavigation'/'local'/'LOKAL'/'0.2006.03.20.16.50.48':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [milds2004] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted</i>
Any help will be appreciate. Thx.
Vito

Hi Nagarajan,
it seems not good
D:\usr\sap\GVD\DVEBMGS01\SDM\program>sdm changepassword "sdmhome=D:\usr\sap\GVD\
DVEBMGS01\SDM\program" "newpassword=ADMIN1"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_java_home=D:/j2sdk1.4.2_09
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_64bit_switch=
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_heap_size=128
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_memory_switch=-Xmx128M
D:\usr\sap\GVD\DVEBMGS01\SDM\program>set sdm_com="D:/j2sdk1.4.2_09\bin\java" -X
mx128M -jar "D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar"
D:\usr\sap\GVD\DVEBMGS01\SDM\program>"D:/j2sdk1.4.2_09\bin\java" -Xmx128M -jar
"D:\usr\sap\GVD\DVEBMGS01\SDM\program\bin\SDM.jar" changepassword "sdmhome=D:\u
sr\sap\GVD\DVEBMGS01\SDM\program" "sdmhome=D:\usr\sap\GVD\DVEBMGS01\SDM\program"
"newpassword=ADMIN1"
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addI
viewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBased
SecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator g
enerateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem
startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConf
igurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHiera
rchicalContext lookup
Starting SDM - Software Deployment Manager...
tc/SL/SDM/SDM/sap.com/SAP AG/7.0005.20051006181702.0000
Initializing Network Manager (50117)
Checking if another SDM is running on port 50118
SDM is integrated in JStartupFramework. No repository changing commands are poss
ible.
Processing error. Return code: 4
Could U help, pls? Thx
Vito

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

I cannot connect my ipad with the program of yamaha stagemix, is urgent that they solve this problem to me, buys ipad esfecificamente to use that application, has somebody been able it to solve?

TS1286 Cannot connect to internet with USB

I am a new user of Ipod touch 5th gen 32 gig I cannot connect to internet with usb?

Hi bikernblondie,
When you say that you're trying to connect to the internet with USB, do you mean that you're trying to connect your iPod to the internet so that you can surf the internet with a browser on your iPod, or that you're trying to connect your iPod to your computer so that you can sync it with iTunes and bring over songs, movies, apps, etc.?
- O.C.

HT1222 I cannot connect Iphone 5 with itunes store.

I cannot connect Iphone 5 with itunes store.

I couldn't earlier but it seems OK now. Possibly it was down temporarily?

Error when connect to SAP with JCo Connector on linux

Dear all,
Please, i need help. i was tray to connect to SAP with SAP JCo on linux ubuntu, but i have an error.
this is the error :
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM GWHOST=myhost, GWSERV=sapgw00, ASHOST=myhost, SYSNR=00
LOCATION    CPIC (TCP/IP) on local host
ERROR       hostname 'avatar-bumi' unknown
TIME        Thu Feb 14 15:25:48 2008
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -2
MODULE      niuxi_mt.c
LINE        388
DETAIL      NiPGetHostByName2: hostname 'avatar-bumi' not found
SYSTEM CALL gethostbyname_r
ERRNO       110
ERRNO TEXT Connection timed out
COUNT
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeConnect(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.connect(MiddlewareRFC.java:1125)
        at com.sap.mw.jco.JCO$Client.connect(JCO.java:3138)
        at sapjco.Main.main(Main.java:34)
Exception in thread "main" com.sap.mw.jco.JCO$Exception: (121) JCO_ERROR_NULL_HANDLE: Invalid rfc_handle = NULL encountered
        at com.sap.mw.jco.rfc.MiddlewareRFC.nativeGetAttributes(Native Method)
        at com.sap.mw.jco.rfc.MiddlewareRFC$Client.getAttributes(MiddlewareRFC.java:1233)
        at com.sap.mw.jco.JCO$Client.getAttributesInternal(JCO.java:2940)
        at com.sap.mw.jco.JCO$Client.getAttributes(JCO.java:2994)
        at sapjco.Main.main(Main.java:38)
How to resolve this error....
Regards,
Lisa
Edited by: Lisa Yanti on Feb 14, 2008 9:35 AM

I was resolve this error by my self.
We can handle this error with registering our current IP and host name on /etc/hosts.
example:
content of /etc/hosts:
127.0.0.1 localhost
127.0.1.1 myhost.workgroup
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
added the ip and host name to be like this configuration
127.0.0.1 localhost
127.0.1.1 myhost.workgroup
172.20.17.74 myhost
The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

Remote Connection to SAP with SAP Web Dispatcher

Dear Experts,
i have installed a SAP Router + SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0. The remote connection works.
SAP Router is in a DMZ
SAP ECC 6.0 IDES + SAP Portal 7.0 + SAP Solution Manager 7.0 are in another network only for SAP Systems
Fo security reason, i would like to install a SAP Webdispatcher with the SAP Router's Server.
I already:
have extracted the icmadmin.sar file
have executed the sapwebdisp -bootstrap command
have started the web dispatcher with sapwebdisp pf=sapwebdisp.pfl
have activated /sap/public/icman and /sap/public/icf_info/* services inthe SAP Solution Manager
As the saprouttab file for the saprouter, i would like to establish the connection to SAP withe the SAP WebDispatcher.
My questions are:
What are the parameters i have to put in the sapwebdisp.pfl file?
Do i have to create the PERMFILE and the AUTHFILE?
Any example of profil file? (another than the SAP Library example)
Thank you very much for your help in advance.
Best regards.
Pascal Tran.
PS: Here is the sapwebdisp.pfl file
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 50
add default directory settings
DIR_EXECUTABLE = .
DIR_INSTANCE = .
Accessibility of Message Servers
rdisp/mshost = <Solution_Manager_hostanme>
rdisp/msserv = sapms<Solution_Manager_SID>
ms/http_port = 81<Solution_Manager_Instance_Number>
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn      = 500
icm/max_sockets   = 1024
icm/req_queue_len = 500
icm/min_threads   = 10
icm/max_threads   = 50
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=8050
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin,AUTHFILE=icmauth.txt
Hostname per default
icm/host_name_full = <SAP_Router_Hostname>

Hello,
The two important paramters are covered in your profile.
Accessibility of Message Servers
rdisp/mshost = <Solution_Manager_hostanme>
rdisp/msserv = sapms<Solution_Manager_SID>
ms/http_port = 81<Solution_Manager_Instance_Number>
And the port on which your webdispatcher listens from outside world.
icm/server_port_0 = PROT=HTTP,PORT=8050
For additional security you can use the https port also.
I dont think you need to maintain any other file manually.
I had configured web dispatcher but for 640 stack. It should be more or less the same.
An example file sapwebdisp.pfl
Profile generated by sapwebdisp bootstrap
unique instance number
SAPSYSTEM = 1
Accessibility of Message Servers
rdisp/mshost = <hostname>
ms/http_port = 8101
ms/https_port = 8005
SAP Web Dispatcher Parameter
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/shm_attach_mode = 6
configuration for default scenario (medium size)
icm/max_conn      = 500
icm/max_sockets   = 1024
icm/req_queue_len = 500
icm/min_threads   = 10
icm/max_threads   = 50
mpi/total_size_MB = 80
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
wdisp/shm_attach_mode = 6
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTPS,PORT=1443
icm/server_port_1 = PROT=HTTP,PORT=1081
icm/HTTPS/verify_client = 0
SAP Web Dispatcher Web Administration
icm/HTTP/admin_0 = PREFIX=/sap/wdisp/admin,DOCROOT=./admin
DIR_INSTANCE = C:\Secudir
ssl/ssl_lib = C:\Secudir\sapcrypto.dll
ssl/server_pse= C:\Secudir\SAPSSLS.pse
wdisp/ssl_cred = SAPSSLS.pse

MSSQL Homogeneous System Copy : SAPINST cannot connect to default database

Hello.
We want to perform a homogeneous system copy, following Note 151603.
We have attached the source DB (RP1) to the destination DB (RD4) following the above mentioned Note.
Now, logged to the server as DOMAIN\rd4adm , we want to execute the SAPINST, as indicated in the Note 683447, but when giving the password for user rd4adm we get a pop up
Cannot connect to R3SVIL\RD4 [SQL Server]Cannot open user default database. Login failed.
R3SVIL is the server. Login is done with windows authentication (connected as domain\rd4adm)
We cannot find a Note descibing this issue and how to fix it, must be something with user : does anybody have suggestion or solution?
Thanks a lot,
Dino

Hi,
did you apply SAP note 551915 - R/3 won't start after database restore or database copy
also check Note 806925 - SQL Error 4064: Cannot open user default database
regards,
kaushal

After a system restart i cannot connect to SAP with SAPGUI.

Similar Messages

Maybe you are looking for