After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

Hi Gurus,
We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
I verified in SU01 for user access and every are assigned there roles and they are green.
Do we need to add any new authorization object to fix this issue, please let me know
Thanks and appreciate your help.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

Hi Ganesh,
check the behaviour, if you assign
S_USER_AGR                          
   ACT_GROUP = "..name of the assigned role.."
   ACTVT = 03 (for "display")    
b.rgds,
Bernhard

Similar Messages

  • After BI 7.0 Upgrade, Roles and profiles are not visible

    Hi Gurus,
                                  We have issue with the roles and profiles, all our users doesnt see any roles or profiles in Bex Analyzer, under there user access after BI 7.0 Upgrade. 
                                   When I go and check there profile in SU01 and I can see all roles are assigned but not able to see in the Bex Analyzer reporting tool.
                                   Do we need to do any configuration settings after BI 7.0 upgrade to visible roles. This problem with every user.
                                   Your help will be really appreciated.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Oct 22, 2009 5:19 PM

    Hi Mohan/Vijay,
                            Sorry for little bit late. I have all authorization roles access, and users dont have that access. Difference between our roles is I have SAP_ALL and SAP_NEW.
                            But when they login with old bex analyzer they can see all roles, but not with new bex analyzer.
                            Please some suggest me still I need to run SU25.
    Thanks
    Dayaker Reddy.
    Edited by: Ganesh Reddy on Oct 26, 2009 10:19 AM

  • Authorization : roles and profiles

    Hi,
    I have two questions that I need answers
    - How do I check roles that are assigned to reports and
    - roles and profiles needed to execute reports
    thanks in advance

    Hi,
    Roles or profiles are assigned to user not specific reports or queries, if u need u can check what roles are assigned to u in SU01, provide the user name and go to display mode there u will find profiles tab, u can check .
    Hope this helps u a lot.........
    Assigning points is the way of saying Thanks in SDN
    Regards
    Ramakrishna Kamurthy

  • MRS - Resources and demands are not visible in the Planning Board

    Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
    But when I am accessing Manageru2019s Planning Board -  /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core"
    The details of the Error message
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core
    Message no. /MRSS/SGE034
    Diagnosis
    Resource 00000000010000000000000000000000 has not yet been created in MRS.
    System Response
    No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
    Procedure
    Contact technical support.
    Procedure for System Administration
    Create the resource in question in MRS."
    I have run the Report
    /MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
    But even after that I am not getting the resources in the planning board.
    Also I am not able to view the Demands from PM/CS orders.
    I have created PM Orders and
    Assigned Work centres to the operations and
    assigned the Resources to the Operations.
    The HR assignment to the work center is also done.
    I have tried T Code   /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
    to pull the order demand. But it is not working
    Its giving following message
    1004280 is not a valid demand
    Message no. /MRSS/SGU139
    Diagnosis
    The order does not exist in MRS.
    This may be because:
    The order number has an invalid format.
    The order does not exist.
    The order is not relevant for planning and has therefore not been transferred to MRS.
    The order has been deleted from MRS.
    Pls help me on this.
    Thanks in advance and warm regards
    Purnendu

    Hi Anil/Saurabh - Thanks a lot for your replies.
    I have checked the MRS configuration as per your suggestion.
    It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
    But the Demands are not visible on the Planning Board.
    I have checked in the debugging mode what is causing the problem - It looks like
    "The Database Table: /mrss/d_dem_h  needs entry"
    But there are no entries in this table.
    I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
    I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
    How do I maintain entries in this table?
    How do I transfer Demand from ECC to MRS?
    Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
    We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
    To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
    So I am not sure whether it is executing the program properly.
    Pls help me resolve these issues.
    Thanks and warm regards
    Purnendu

  • Facebook profile and home are not visible

    Today in the afternoon, Facebook started to act strangely. I can log on without a problem, but when i'm in the website the home and the profile pages are not visible, they are blank and this is strange because with Chrome i have no problems, and because in the safe mode the problem is still here, so the plugins aren't the source of the problem.
    The account and other option pages are fine, only those two don't work.
    Few weeks ago, i had to change a value in the about:config page, to make work "youtube buttons", but i think it's not that the problem, also because this morning Facebook worked. I don't know what to think. Is this maybe Facebook IT fault? Boh.
    Thank you for your time

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • Server Manager error 0x80070422 - Roles and features are not accesible

    Hi
    I cannot view Roles and Features in Server Manager on my Server 2008 R2 box. The error is:
    Unexpected error refreshing Server Manager: The service cannot be started, either because it is disbaled or because it has no enabled devices assicaited with it (Exception from HResult: 0x80070422)
    I have looked at my services - but don't know what service to look for, everything seems to be in order.
    After some investigation on the net, I understood that I need to setup the win readiness tool, I did and the output in CheckSur file is as follows
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 12.0
    2011-05-31 19:02
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    (f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum  Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual
    file name
    (fix) CBS MUM Corrupt CBS File Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
    (fix) CBS Paired File CBS File also Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 4058
     Found 1 errors
     Fixed 1 errors
      CBS MUM Corrupt Total count: 1
      Fixed: CBS MUM Corrupt.  Total count: 1
      Fixed: CBS Paired File.  Total count: 1
    Here again, it seems that everything is fine.
    Thanks in advance for your help

    Hi,
    Please try to install Windows Server 2008 R2 Service Pack 1 directly and check the result. Service Pack 1 for Windows Server 2008 R2 includes all the
    previous released Windows Updates and hotfixes.
    If it does not work, you will need to copy these files from another working Windows Server 2008 R2 system to replace the corrupt ones.
    Otherwise, you will need to perform an In-Place upgrade to repair the system.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • E5 memory card images and videos are not visible i...

    am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

    Hi saaraaz,
    Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
    Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
    If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
    Reinstall the software. The process is the same when updating, but at the end select "reinstall". 
    Hope you get the device working again, please let me know if this is not the case.
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Right click on anything opens a distorted image of the website and options are not visible.

    Please help! Every time I right click options are not shown and instead I'm greeted with a distorted image of the current website. This happens when I want to open a link on another tab and when I go onto the firefox settings in the top left corner. When I go in the options in the top left corner, instead of an image of the website, a magnified image of what I clicked appears. This doesn't allow me to see the options and if I'm lucky and move around the mouse they appear for a second and the image reappears. Please help! I've erased Firefox and reinstalled it and nothing, the problem still persists. Thanks for helping! :)

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • After the IOS 6 upgrade the new phone features are not showing up when I get a call. I have a Iphone 4s

    I have the Iphone 4S and after the upgrade to IOS 6 the new features are showing on my phone when I receive a call

    If the basic troubleshooting steps, including restore as a NEW device, not from backup, have failed to resolve your issue, then you are probably having some hardware malfunction.  You will need to bring your phone, and $199 to Apple for out of warranty replacement of the phone.

  • Add-ons which are installed and enabled are not visible - no Firebug icon, no Web Developer toolbar.

    I was busy working with Firebug last night. This morning the icon wasn't present and I couldn't find it anywhere. In Add-on manager I disabled/reloaded then enabled/reloaded, but still nothing. Web developer toolbar was also missing and not in the toolbar menu. Checking versions, I saw I had Firebug 1.8.1, and one of the compatibility lists suggested that went with Firefox 6 (I was on 5.0.1).
    I installed Firefox 6 beta, reinstalled Firebug 1.8.1, but no change. I uninstalled, reinstalled 5.0.1 and this time Firebug 1.8.0, and again nothing.
    I must be missing something, but my poductivity has suffered so much that I'd be happy to discover exactly what sort of idiot I am.

    I know where to find it. It was the absence of that icon I was complaining about. After a day and a half of doing very little, I suddenly saw that the Web Developer toolbar had reappeared (for no apparent reason). That gave me access to options which had previously been invisible, and I have succeeded in switching Firebug on again. I only wish I could tell all the other people suffering from this problem how to solve it, but the solution was quite spontaneous.

  • Actually i have problem in using facebook and skype.profile pictures of mine and others are not visible to me.same problem in in macbook pro and in iphone.

    i have deleted acrobat reader professional by mistake ..

    If you live in the UAE or another country where FaceTime is restricted by the government, you will not have FaceTime on your phone. This would also apply if the phone was bought in a country where the app is restricted. You cannot download it either.

  • SAP Roles and Profiles provisioning

    Hi all,
    I am trying to provision SAP CUA using the SAP UM Connector.
    User gets provisioned, but its role and profile do not get assigned.
    The tasks "Add Role" and "Add Profile" are seen as completed.
    But the roles and profiles are not seen in SAP.
    Thanks in advance

    Any inputs from anyone ???

  • How to find my 'role' and 'profile'?

    When i log into a client as a user, Is there a way for me to find out what my 'role' and 'profile' are? I can't run su01d.
    Edited by: Concoran Fernandez on May 18, 2008 5:28 AM

    Hi,
    No there is no such transaction as far as i know,But you can change your own user data in 'SU3'.
    If your requirement is that you want to see whicch authorization you are missing then use the tcode SU53.It will show you the missing authorization.Then use suim to find out which role or tcode has that authorization so that u can assign the todes and auth using 'SU01' or 'PFCG'.
    Regards,
    Vamshi.

  • Roadmap steps  are not visible after patching

    Hi ,
    After upgrading or patching ,roadmap steps are not visible in my application.
    i have used several road maps in my application?
    what is the reason for this?
    Regards,
    Lakshmi.

    I have faced the same issue.
    These are browser compatibility issues.
    Different browsers behave in different manner.
    There is a permanent solution for it to upgrade tools version to 8.52.03.
    This update has been provided by oracle for resolution of browser compatibility issues.
    Hope it helps !!

  • Nodes and links are not displaying in IE10 browser - mapviewer ps6

    Hi,
    Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
    In IE10 browser ,
    when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
    when we deselect this node are not displaying properly
    Is there any existing bug on mapviewer?
    Thanks in Advance
    Aruna

    DRK Montreal,
    try opening Terminal, and running the following command in the Terminal window:
    nslookup www.pinatize.me
    If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
    Please include in your reply the full output from that command.

Maybe you are looking for

  • How can I convert my Bookmarks toolbar to small ikons only in F4

    Firefox 4 has converted my Bookmarks toolbar from small ikons only in Firefox 3 (last version) to names only. How can I display it again in small ikons only.

  • Cant view/open messages on my PC Suite!

    Hi PC suite experts: need your expertise on this one Im not able to open or view any messages on my PC suite--after two PC suite updates and one phone firmware update along with numerous PC suite Cleaning and Reinstalling I can open the contact and c

  • Upgrade to PI_BASIS, 2006_1_700

    I need to load support pack SAPKW0015, a prerequisite is to upgrade to PI BASIS 2006_1_700. When i try to do the upgrade i get a message that SAPKIPYM05 is a prerequisite. I cannot find support pack SAPKIPYM05 but only SAPKIPYM01 - 04. Please help

  • Calling a symbol on stage from nested symbol

    sym.getComposition().getStage().getSymbol("mySymbol").hide(); and it doesn't work!!! What am I doing wrong?

  • ITunes Update Problem Causing Runtime Error R6034

    I have tried everything to fix this issue and read postings about it.  None worked. I uninstalled all apple applications, restarting in between, then started getting (APSDaemon.exe system error icudt49.dll is missing). Installed iTunes and back to Ru