After BI 7.0 Upgrade, Roles and profiles are not visible

Hi Gurus,
                              We have issue with the roles and profiles, all our users doesnt see any roles or profiles in Bex Analyzer, under there user access after BI 7.0 Upgrade. 
                               When I go and check there profile in SU01 and I can see all roles are assigned but not able to see in the Bex Analyzer reporting tool.
                               Do we need to do any configuration settings after BI 7.0 upgrade to visible roles. This problem with every user.
                               Your help will be really appreciated.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Oct 22, 2009 5:19 PM

Hi Mohan/Vijay,
                        Sorry for little bit late. I have all authorization roles access, and users dont have that access. Difference between our roles is I have SAP_ALL and SAP_NEW.
                        But when they login with old bex analyzer they can see all roles, but not with new bex analyzer.
                        Please some suggest me still I need to run SU25.
Thanks
Dayaker Reddy.
Edited by: Ganesh Reddy on Oct 26, 2009 10:19 AM

Similar Messages

  • After BI 7.0 Upgrade, Authorization Roles and profiles are not visible

    Hi Gurus,
    We have an issue with authorization roles and profiles are not visible for all end users with new Bex Analyzer (BI 7.0) tool. But still they can see these roles with old Bex Analyzer ( Bex 3.5) tool.
    As a developer I have SAP_ALL acces and I can see all authorization roles in new BEx Analyzer (BI 7.0).
    I verified in SU01 for user access and every are assigned there roles and they are green.
    Do we need to add any new authorization object to fix this issue, please let me know
    Thanks and appreciate your help.
    Thanks
    Ganesh Reddy.
    Edited by: Ganesh Reddy on Oct 26, 2009 4:41 PM

    Hi Ganesh,
    check the behaviour, if you assign
    S_USER_AGR                          
       ACT_GROUP = "..name of the assigned role.."
       ACTVT = 03 (for "display")    
    b.rgds,
    Bernhard

  • Facebook profile and home are not visible

    Today in the afternoon, Facebook started to act strangely. I can log on without a problem, but when i'm in the website the home and the profile pages are not visible, they are blank and this is strange because with Chrome i have no problems, and because in the safe mode the problem is still here, so the plugins aren't the source of the problem.
    The account and other option pages are fine, only those two don't work.
    Few weeks ago, i had to change a value in the about:config page, to make work "youtube buttons", but i think it's not that the problem, also because this morning Facebook worked. I don't know what to think. Is this maybe Facebook IT fault? Boh.
    Thank you for your time

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

  • When Soft Proofing in LR4 most of my loaded printer profiles are not visible

    I am running LR4 and CS6 on an HP desktop with 4Gig Ram, Win 7 Home, Profiled Monitor using DataColor
    In CS6, all my loaded ICC printer profiles appear when setting up the soft proofing...
    In LR4, most of the profiles do not appear...
    The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
    The problem is that I print to an Epson 7600 CMYK printer with UltraChrome Ink and mostly on Canvas so I need to proof for that environment.
    Photos of the two different pull downs are attached.

    dmcrescent wrote:
    Not sure what makes you think the Epson 7600 is a CMYK printer, but it isn't. You may be running a CMYK RIP attached to it, but the printer accepts RGB data, not CMYK. The only reason I can think of needing to profile in CMYK would be if you were using profiles generated for a press. I'm sure there may be others, but can't think of one off the top of my head.
    Well you can send either RGB or CMYK to the printer but you have to first setup the proper driver for either. Unless you are proofing (make my Epson simulate a press sheet), I can’t think of any reason to send it CMYK data. The limitation is the driver in terms of what you send it. With a 3rd party driver (might be a RIP, might not) it can be possible to send CMYK data to the Epson. Epson bundles the ColorBurst product for this purpose (press simulation, use of CMYK profiles).
    Since the Lightroom path is solely RGB, it can’t do anything with CMYK data. So the profiles are filtered out of the list. And don’t expect this to change anytime soon or ever. If CMYK is your game, well you need Photoshop or some other application to handle this data. And you’ll need another driver. So in context of this post, CMYK is simply not a possibility and that is why the profiles are not accessible.

  • MRS - Resources and demands are not visible in the Planning Board

    Hi Friends - I am working on the the MRSS 610. We have installed it on the our ECC 6.0 as an add-on. We have configured the system as per the configuration guide.
    But when I am accessing Manageru2019s Planning Board -  /MRSS/PLBOMGR , using the Organization unit, I am getting Notification saying that the resources assigned to the Organization unit are not available in the MRS.
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core"
    The details of the Error message
    "Resource 00000000010000000000000000000000 not yet created in the WFM Core
    Message no. /MRSS/SGE034
    Diagnosis
    Resource 00000000010000000000000000000000 has not yet been created in MRS.
    System Response
    No assignments have been created for resource 00000000010000000000000000000000, even though, according to the organizational model, this resource is to be taken into consideration in the planning board.
    Procedure
    Contact technical support.
    Procedure for System Administration
    Create the resource in question in MRS."
    I have run the Report
    /MRSS/HCM_RPTWFMIF : Transfers the HR data (availability times, qualifications and the resources itself) into the MRS Basis
    But even after that I am not getting the resources in the planning board.
    Also I am not able to view the Demands from PM/CS orders.
    I have created PM Orders and
    Assigned Work centres to the operations and
    assigned the Resources to the Operations.
    The HR assignment to the work center is also done.
    I have tried T Code   /MRSS/PLBOSRV - Enter the MRS planning board using a specified order
    to pull the order demand. But it is not working
    Its giving following message
    1004280 is not a valid demand
    Message no. /MRSS/SGU139
    Diagnosis
    The order does not exist in MRS.
    This may be because:
    The order number has an invalid format.
    The order does not exist.
    The order is not relevant for planning and has therefore not been transferred to MRS.
    The order has been deleted from MRS.
    Pls help me on this.
    Thanks in advance and warm regards
    Purnendu

    Hi Anil/Saurabh - Thanks a lot for your replies.
    I have checked the MRS configuration as per your suggestion.
    It looks fine as per the configuration guide. I have done the PM/CS integration for Orders as demand.
    But the Demands are not visible on the Planning Board.
    I have checked in the debugging mode what is causing the problem - It looks like
    "The Database Table: /mrss/d_dem_h  needs entry"
    But there are no entries in this table.
    I could not find any Customizing transactions or Application transactions for maintaining this table. This is an Application Table for Master and Transaction Data and its Display and Maintenance allowed with Restriction.
    I could not also find any transaction for transferring Demand from ECC(R/3) to MRS.
    How do I maintain entries in this table?
    How do I transfer Demand from ECC to MRS?
    Saurabh - I have also been not able to transfer HR Resources from ECC to MRS.
    We don't have WFM Core installed in our instance. But MRS should work fine without WFM. MRS Basis should take care of it.
    To transfer Employee resources i have run the Program " /MRSS/HCM_RPTWFMIF". But when I execute the transaction with the selection parameters system shows that it is processing (Clock at the bottom Status bar) but it does not shows any result or status.
    So I am not sure whether it is executing the program properly.
    Pls help me resolve these issues.
    Thanks and warm regards
    Purnendu

  • Server Manager error 0x80070422 - Roles and features are not accesible

    Hi
    I cannot view Roles and Features in Server Manager on my Server 2008 R2 box. The error is:
    Unexpected error refreshing Server Manager: The service cannot be started, either because it is disbaled or because it has no enabled devices assicaited with it (Exception from HResult: 0x80070422)
    I have looked at my services - but don't know what service to look for, everything seems to be in order.
    After some investigation on the net, I understood that I need to setup the win readiness tool, I did and the output in CheckSur file is as follows
    =================================
    Checking System Update Readiness.
    Binary Version 6.1.7601.21645
    Package Version 12.0
    2011-05-31 19:02
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    (f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum  Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual
    file name
    (fix) CBS MUM Corrupt CBS File Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
    (fix) CBS Paired File CBS File also Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 4058
     Found 1 errors
     Fixed 1 errors
      CBS MUM Corrupt Total count: 1
      Fixed: CBS MUM Corrupt.  Total count: 1
      Fixed: CBS Paired File.  Total count: 1
    Here again, it seems that everything is fine.
    Thanks in advance for your help

    Hi,
    Please try to install Windows Server 2008 R2 Service Pack 1 directly and check the result. Service Pack 1 for Windows Server 2008 R2 includes all the
    previous released Windows Updates and hotfixes.
    If it does not work, you will need to copy these files from another working Windows Server 2008 R2 system to replace the corrupt ones.
    Otherwise, you will need to perform an In-Place upgrade to repair the system.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • E5 memory card images and videos are not visible i...

    am using nokia e5,it was working all well but few days before i tranferred files from laptop to my cell(images) using Mass Storage option by data cable.soon after that images and videos saved in memory card is not visible on phone.test mesgs and music files are visible but phone isnt showing my images and video files which ive recievd through bluetooth and saved in memory card.why is this so???plzzz help me am in mess cant help it

    Hi saaraaz,
    Welcome to the forum! I tried to transfer pictures via bluetooth and they were saved to gallery like they should. Please try the following actions and between them test if it works.
    Firstly please make a back up with Nokia Suite. Then type in *#7780# = soft reset, no data lost.
    If it's still the same, type in *#7370# = hard reset, the phone memory will be wiped. Restore back up. You can also try to make the back up without settings and then format and restore.
    Reinstall the software. The process is the same when updating, but at the end select "reinstall". 
    Hope you get the device working again, please let me know if this is not the case.
    Jampe
    If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

  • Right click on anything opens a distorted image of the website and options are not visible.

    Please help! Every time I right click options are not shown and instead I'm greeted with a distorted image of the current website. This happens when I want to open a link on another tab and when I go onto the firefox settings in the top left corner. When I go in the options in the top left corner, instead of an image of the website, a magnified image of what I clicked appears. This doesn't allow me to see the options and if I'm lucky and move around the mouse they appear for a second and the image reappears. Please help! I've erased Firefox and reinstalled it and nothing, the problem still persists. Thanks for helping! :)

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Actually i have problem in using facebook and skype.profile pictures of mine and others are not visible to me.same problem in in macbook pro and in iphone.

    i have deleted acrobat reader professional by mistake ..

    If you live in the UAE or another country where FaceTime is restricted by the government, you will not have FaceTime on your phone. This would also apply if the phone was bought in a country where the app is restricted. You cannot download it either.

  • Add-ons which are installed and enabled are not visible - no Firebug icon, no Web Developer toolbar.

    I was busy working with Firebug last night. This morning the icon wasn't present and I couldn't find it anywhere. In Add-on manager I disabled/reloaded then enabled/reloaded, but still nothing. Web developer toolbar was also missing and not in the toolbar menu. Checking versions, I saw I had Firebug 1.8.1, and one of the compatibility lists suggested that went with Firefox 6 (I was on 5.0.1).
    I installed Firefox 6 beta, reinstalled Firebug 1.8.1, but no change. I uninstalled, reinstalled 5.0.1 and this time Firebug 1.8.0, and again nothing.
    I must be missing something, but my poductivity has suffered so much that I'd be happy to discover exactly what sort of idiot I am.

    I know where to find it. It was the absence of that icon I was complaining about. After a day and a half of doing very little, I suddenly saw that the Web Developer toolbar had reappeared (for no apparent reason). That gave me access to options which had previously been invisible, and I have succeeded in switching Firebug on again. I only wish I could tell all the other people suffering from this problem how to solve it, but the solution was quite spontaneous.

  • SAP Roles and Profiles provisioning

    Hi all,
    I am trying to provision SAP CUA using the SAP UM Connector.
    User gets provisioned, but its role and profile do not get assigned.
    The tasks "Add Role" and "Add Profile" are seen as completed.
    But the roles and profiles are not seen in SAP.
    Thanks in advance

    Any inputs from anyone ???

  • How to find my 'role' and 'profile'?

    When i log into a client as a user, Is there a way for me to find out what my 'role' and 'profile' are? I can't run su01d.
    Edited by: Concoran Fernandez on May 18, 2008 5:28 AM

    Hi,
    No there is no such transaction as far as i know,But you can change your own user data in 'SU3'.
    If your requirement is that you want to see whicch authorization you are missing then use the tcode SU53.It will show you the missing authorization.Then use suim to find out which role or tcode has that authorization so that u can assign the todes and auth using 'SU01' or 'PFCG'.
    Regards,
    Vamshi.

  • Nodes and links are not displaying in IE10 browser - mapviewer ps6

    Hi,
    Node and link are not visible on the IE10 browser where as in IE9 they are displaying properly.
    In IE10 browser ,
    when we set compatibility settings - Display All websites in compatibility view --> node are displaying properly.
    when we deselect this node are not displaying properly
    Is there any existing bug on mapviewer?
    Thanks in Advance
    Aruna

    DRK Montreal,
    try opening Terminal, and running the following command in the Terminal window:
    nslookup www.pinatize.me
    If you still have access to some of those other Mac computers, try running the same command on them also for comparison.
    Please include in your reply the full output from that command.

  • VIRSA tables for users, roles and profiles sync?

    Hello,
    I am in a customer, implementing CC 5.2. At the first time, we tried CC 5.2 in DEV environment, and when everything was OK, we redirect RFC connectors to QA environment.
    After doing user, roles and profiles sync in DEV and in QA environment too, I have 4.500 user (1.100 from DEV + 3.400 from QA) when I recover all users "*" with "user level - risk analysis" from the "Informer" tab.
    It seems that "users, roles, profiles, sync" works like and "APPEND", but I did a COMPLETE syncronization not an INCREMENTAL.
    If I start an analysis for QA environment, CC works properly and only analyse QA users (3.400). But I would like to clean CC tables (users, roles and profiles) in order to have a clean copy of QA in CC.
    Which VIRSA tables (users, roles and profiles) I need to clean?
    It is necessary to do the same with authorization and text objects? Which would be these tables?
    Thanks in advance,
    Victor

    Hi all,
    SAP GRC Support provides a script which allows you to remove a connector since it does delete all data link to it. Anyway, I would recommend a deep analysis of it and find out if it does what you really want to do.
    Víctor, if what you want to do it is just to remove all user, role and profile master data (stored in tables VIRSA_CC_SYSUSR and VIRSA_CC_GENOBJ) you could upload a text file using data extractor functionality with the delete field set to X. Doing so user, role and profile master data will be removed from CC database.
    In order to use data extraction functionlaity you connector must be of type "File Local".
    Be careful about removing data directly from DB since, as Prem states, you might loose the DB consistency.
    Hope it helps. Best regards,
       Imanol

  • Developing security Roles and profiles

    Hi Team,
    Can you guys let me know how to develop security roles and profiles. We are rolling out for a company in Japan, and the congif is completed. We are in the process of developing test cases ans also security roles and profiles for users? Can somebody guide and help me on this?
    Regards,

    Hi,
    Use Tcode = PFCG -->then create any customized roles and profiles for any users on module based.
    user masters: USR01 to 09, UST04,
    profiles: USR10, USR11, UST10S, UST10C,
    authorisations: USR12, USR13, UST12.
    password exceptions USR40.
    History tables(may not be applicable but FYI): users: USH02, USH04,
    profiles: USH10, auths USH12.
    R/3 Security Tcodes
    End User Transaction Code  Menu Path   Purpose
    SU3  System > User Profile> Own Data  Set address/defaults/parameters
    SU53  System > Utilities > Display Authorization Check  Display last authority check that failed
    SU56  Tools --> Administration --> Monitor --> User Buffer  Display user buffer
    Role Administration Transaction Code  Menu Path   Purpose
    PFCG
    Tools --> Administration --> User Maintenance --> Roles  Maintain roles using the Profile Generator
    PFUD   Work on SAP check indicators and field values
    Select: Copy SAP check IDu2019s and field values
    Installation
    1. Initial Customer Tables Fill
    Upgrade
    2a. Preparation: Compare with SAP values
    2b. Reconcile affected transactions
    2c. Roles to be checked
    2d. Display changed transaction codes
    SU24
    Same as for SU25:
    Select: Change Check Indicators > Maintain Check Indicators>Maintain 
    Regards,
    Srini Nookala

Maybe you are looking for