After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

Similar Messages

  • After BIOS update my Equium L40 doesn't work anymore!

    Hi friends...
    Please, I need a help.
    I updated my laptop bios v1.60 to v2.00 and after that it doesn't work anymore.
    When I try to power it on nothing happens.
    Maybe I need original BIOS.
    Who has some solution? What can I do?
    Could someone help me?
    Thanks!
    My laptop is an Equium L40 series - PSL49E - 156

    Hi
    I can say what you have to do now
    You have to contact the ASP in your country for a help
    Yes, you need the ASP technician.
    I assume the ROM module where the BIOS is stored has not been flashed correctly.
    I think the ASP will try to flash it again using an special BIOS version
    Good luck

  • After shut down Satellite P300-150 doesn't start anymore

    I have a P300-150, it shut down a day or so ago mid-use. I thought it was just a protective thermal shut down as I'd had it on all day watching dvds / online tv. It wouldn't come back up straight away so I let it cool off for a while but it still won't come back up. Tried it battery in and battery out to no avail. I don't even get as far as POST/BIOS.
    Anyone know the best course of action or other things to check? The PSU is working as my multi-meter sees a healthy 19-odd volts from it.
    Cheers.

    Im afraid you need professional help with this so I recommend you to contact nearest Toshiba service and ask for help.
    There is no special key combination that will bring your notebook to the life again.

  • After BIOS update DVD driver do not read DVDs anymore - Sat A80

    Hi,
    I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
    Can I reinstall the old bios? Can I reinstall the firmware?
    Thanks
    Ronai Lisboa

    Hi Ronai
    Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
    Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
    However, it's nice that you have solved the problem and that the drive works properly.
    Thanks for the feedback.

  • Satellite P500 - After BIOS update the number pad isn't working anymore

    I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
    The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
    I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
    Anyone have any ideas? Thanks in advance

    I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
    *EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
    Message was edited by: Matrixion

  • After the update the home sharing doesn't work anymore

    Last night I had an update from my Apple TV. After I updated it, the home sharing doesn't work anymore on any device. Not on my iPhone, iTunes, iPad, nothing. I double checked every setting and this isn't the problem. I have the newest version of iTunes. Please help!

    Hello Roossx2,
    Thanks for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting Home Sharing
    http://support.apple.com/kb/TS2972
    Have a nice day,
    Mario

  • After BIOS update I can't boot in EUFI anymore

    Hello everyone, I recently replaced my HDD for a SSD and installed Windows 8.1. Then I wanted to install the drivers because some features did not work. So I went to this: 
    http://support.lenovo.com/us/en/products/laptops-and-netbooks/ideapad-z-series-laptops/ideapad-z580 and started at the top. I installed the 64 bits BIOS update for Windows 7 and 8. I followed the instructions... At first I installed 5fcn95ww_public 64bit.exe. The laptop restarted and after that I was not able to boot my laptop anymore . I coulnd even boot from a USB to reinstall windwos (I thought this might help but this BIOS problem has noting to do with windows)
    I am able to go in to the BIOS and change settings... I tried to reset the BIOS but it did not help. Then I changed the boot mode in "legancy support". Now it is able to boot from my SSD. But I want it to boot from in UEFI mode. 
    Please help me. I think I just destroyed my laptop. (I'm sorry for my bad English)

    Hi mezian, and welcome to the Lenovo User Community!
    That's not right . I suggest you return the laptop and exchange, or call support to get it repaired.
    I don't work for Lenovo. I'm a crazy volunteer!

  • My Qosmio F10 is dead after Bios Update

    My Qosmio F10 is dead after BIOS update ... it doesn't work anymore .. i update the bios from 1.10 to 1.20
    the switch Led is always orange...
    what can i do to make it work again ? or return the 1.10 version?

    Hi
    You can check many postings in this forum about the BIOS upgrade procedure.
    Mostly the users damage the notebook because of wrong BIOS or wrong BIOS procedure.
    If the notebook is dead after this procedure so it could be a damage motherboard.
    In this case only the Toshiba service partner can solve this issue. ;(

  • Satellite L300 (PSLB8E) - After BIOS update it doesn't boot again

    Hello there..
    Please help me to overcome this issue.
    I have downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework related error so I thought upgrading BIOS may help to solve it. I have download a new BIOS which is exe file 2.10, its installed successfully and then shut down but never booted again. I have tried to boot it many time. I have tried all the keys. I can only see one power led and two battery light.
    I dont know what to do now. I have a recovery disk but it also not working. I'm stuck.Ii had a bunch of emails to reply I'm lost now.
    Please help me someone.

    Hi dhaval2000in,
    Unfortunately I think the case is clear: Something went wrong due BIOS update and now your notebook cant start anymore :(
    The Toshiba recovery disk will not help you because it doesnt contain any BIOS reflashing programs it contains only a recover image of Windows with all drivers and tools.
    In my opinion you have to contact an authorized service provider in your country to get rid of this because the guys have to reflash the ROM module.
    Im sure you can clarify this problem with the technicians and then you can use your notebook again :)

  • Satellite L40 (PSL48E) - Doesn't reboot after BIOS update

    Hi,
    My problem is that I update the BIOS and after that the machine does not restart. ( BIOS corrupt ? )
    After the BIOS update (Satellite L40 PSL48E) the machine reboot and with the F2 key I open the BIOS setup.
    I check the BIOS version ( 5.50 ) and exit the BIOS setup.The machine must be reboot now.....
    No Way, the machine does not restart . No screen only the powerled lights-up.
    Is there anything I can to fix it on my own like a BIOS reset ?
    Thank you for cooperation.

    This is strange because after the BIOS update you could go into the BIOS.
    However, try to remove the battery and AC/DC adaptor. Wait one hour and then put the battery in and connect the AC/DC adaptor. Try it again.
    If it doesnt work there is something wrong with the BIOS or hardware and should be checked by a notebook technician.

  • Satellite Pro L300: BSOD after BIOS update

    Hi
    after update the Bios of Satellite Pro L300, the windows not start!
    Its show the blue dead screen!
    What can i do?

    Hi
    Are you able to access the BIOS settings?
    Im not quite sure why this BSOD appears but possibly the SATA mode settings have been changed after BIOS update
    Usually the SATA mode should be set to AHCI if the SATA drivers are installed.
    But if the SATA drivers are not included the SATA mode should be set to compatible.
    Please check this!
    Furthermore you could set the BIOS to the default settings and could try to boot the machine again.

  • Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

    Hi.
    Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
    bios-20070709111839.zip
    After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
    I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
    What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
    Thanks in advance
    MAT

    > Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
    What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
    You could try to access the BIOS and try to set the settings to default.
    Dont forget to save the settings if you will exit the BIOS.
    But if this procedure does not help, you will have to contact the ASP in your country.
    Possibly the guys will try to flash the BIOS again with other special version.
    Good luck
    Greetings

  • Satellite Pro C850 wont work after Bios update

    my satellite pro c850 cd wont work after bios update from toshiba.
    what do i do?

    Saying: dont work you mean it does not power up or what do you mean exactly?
    Did you flash the BIOS properly?
    Possibly something went wrong during the update and this means that ROM module isnt flashed properly
    In most cases a special BIOS crisis disk would be needed to get it working
    Not quite sure if you can get it fixed by your own
    Check this thread. Maybe it helps:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=59637
    Otherwise you need help from authorized service provider available in your country.

  • Satellite L650-1KR PSK1JE - dead after BIOS update

    As the subject already states, my Satellite L650 - 1KR Part No. PSK1JE is totally OFF after BIOS-Update 2.40-WIN from bios-download-page.
    I tried everything: Press all buttons, take out the laptop battery, only laptop battery, ...simply nothing!
    My last hope is a hidden, very special key sequence for toshiba laptops or something like this.
    Of course my warranty is already over... :-(
    Please help!
    Thank you in advance...
    lichtimc

    Sorry to hear you have such problem now. I presume something went wrong and now the BIOS chip is screwed up and in such situation you need professional help. Toshiba service provider can help you with this but Im afraid it can be very expensive.
    In the past I never had such problems but on the net you can find many pages with description what can be done. Visit this page and check if you can find something useful there. I mean you can try to fix it alone.

  • Satellite L - After BIOS update it won't start up again

    I just got an email saying there was a BIOS update for my laptop. It started to install but my computer shut down and won't start back up
    PLEASE HELP!!!!!!!
    The update was: ACPI Flash BIOS version 1.90 for Sat/Sat Pro L355D/L305D (PSLE0U, PSLC0/1U)

    Hello
    And what Satellite notebook you have exactly? Is your notebook designed for this update or is it another model?
    After a failed BIOS update you can try this workaround: Remove the AC/DC adaptor and battery then wait one hour. After this connect the AC/DC adaptor and battery again. Now try to start the notebook again.
    If the notebook doesnt start you need help from a notebook technician. Therefore contact the nearest authorized service provider. They can help and will try to reflash the ROM module I think or the mainboard must be exchanged.
    Greets

Maybe you are looking for