After connecting the clients to start video chat using RTMFP , Can the server finish the video chat

After connecting the clients to start video chat using RTMFP , Can the server finish the video chat between clients regardless of clients' will ?

Hi,
I looked on this site http://portforward.com/routers.htm
It lists many routing devices both modems and routers.
I did not see the Surfboard you listed but that does not mean it does not route (It just means it is not in the list)
Your computer is getting the IP 192.168.1.3 which means a device somewhere between you and the internet is routing.
Most likely in System Preferences > Network for the connection method you are using you can see a "Router IP" (192.168.1.1 is most likely based on the IP you get)
Type this into to your Web Browser like you would Apple.com
You should get a Pop Up.
Hopefully it will tell what device you are now trying to Log in to.
This info may help in looking in the Port Forward list.
If not check all the Motorola devices listed and then iChat in the Next page.
The third page from the Link page I gave you will detail the default access info (IP and User ID and Password) for each device you visit.
You may find that there is a common User ID and password across the various devices and this may work for you.
At Random this one says admin and motorola as the User ID and Password. (others may say different)
Don't worry about the fact it says to set a Static IP at this stage Or the Port Forwarding info further down each page.
You will hopefully be now looking at the web pages stored on the modem.
They work like any other web pages with menu items and links to other pages.
Search all the menu items and link to see if the device has UPnP
It tends to be in different places on different routing devices but try Advanced or Admin as well as anything to to do with opening ports.
A Status page like the first pic on the second link page I listed may well tell you if it has UPnP enable or not (but this is not always the case)
Tell us what you find out or if you have some other routing device in between you and the Motorola Surfboard.
10:56 PM Monday; January 19, 2009

Similar Messages

  • TS3697 There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

    There is no camera roll download pop up after connected to iTune, to solve that I used Photo Transfer App to download the Photos, but how can I delete the photos in the camera rolls, as there are 9000 photos in the camera roll

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
    Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

  • After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

    After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

    Hi,
    Try this select to check backup history:
    Select 
    r1.database_name, 
    r1.name, 
    (case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType, 
    r3.physical_device_name, 
    r1.backup_start_date, 
    r1.backup_finish_date, 
    r1.backup_size, 
    r1.compressed_backup_size, 
    r2.is_compressed,
    r1.server_name, 
    r1.first_lsn, 
    r1.last_lsn 
    from msdb.dbo.backupset r1 
    inner join [msdb].[dbo].[backupmediaset] r2
    on r1.media_set_id = r2.media_set_id
    inner join [msdb].[dbo].[backupmediafamily] r3
    on r1.media_set_id = r3.media_set_id

  • I was downloading the walking dead app on my iphone and after it was done it started saying waiting. I can't delete it but if I go into the App Store I can open it through there. Can someone please tell me how to delete it.

    I was downloading the walking dead app on my iphone and after it was done it started saying waiting. I can't delete it but if I go into the App Store I can open it through there. Can someone please tell me how to delete it.

    I have the exact issue with Vivino on Iphone4S. Did u figure out a fix?

  • How do i get video from my sony hx100 digital camera to my mac? after connecting the camera via the supplied usb cable, iMovie shows icons for 5 videos, but none will load.

    i've connected the camera to the mac using the supplied usb cable. imovie shows 5 icons for videos but all of them have the red circle with slash through them and the box to import them is grayed out.

    Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
    I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
    My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
    Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

  • Causing some network problem after connecting the new ASA to my network

    Hi everyone,
    Hope you can help on this issue.... It is strange to me...but may not be to you
    Currently, I have a subnet connects to my primary network. All the internet travel thru a router there in turn thru a pair of ASA failover firewall (ie Subet -> router -> Subnet ASA -> Pirmary network ASA -> Primary network router -> Internet).
    Now we try to setup a internet pipe so the subnet can go to internet by its own. So...for security purpose, we put another new ASA in between.the subnet and the new internet. This will be the first, and the old path to Interent would be the back up route.
    NOW
    I have not even make any route cahgnes on the router yet. What I did was to connect the new ASA to the subnet. Again, I do not change any routes, or any gateway settings on all the computers yet in the subnet!! I just connect the asa. That is it...please remember this.
    However, problem happens. I have a application server in the same subnet.... that keeps kick out users. I also have continuous ping to it... I saw that the server has requesdted time out...it did not come back up until about 10 to 20 seconds later. The server, in fact, is a cluster server. Although I can ping the physical server, I cannot ping the virutal server.
    In order to fix the problem, I really need to unplug the new ASA from the network, and reload the cluster server. Then it starts to work.
    ANother symptom is that...people complaint the log on is obviously slower than usual.
    May I ask why the new ASA will cuase this trouble?? Again, no routes on the router have been change. And all PCs in the subnet are still using old gateway, and did not nkow about the new ASA.
    Any ideas would be great!! Very strange to me. Thank you very much for your help.
    Riderfaiz

    First guest would be proxy ARP.
    Proxy ARP is enabled by default on the ASA. The new ASA might be proxy ARPing for whatever reason.
    OR the new ASA might have been configured with an ip address that belongs to another device by mistake.

  • After connecting a late 2008 MacBook to an external monitor can I show different images on them?

    After connecting an external monitor to my MacBook(late 2008) is it possible to show different images on the two screens at the same time?
    TIA

    Yes. Open System Preference (under the Apple menu) and select Displays. See the instructions in this Apple article for how to continue.
    Best of luck.

  • New ipod 7th generation on connecting it to win 7 pc it needed formatting to fat32 then it said connect to itunes to restore then after connecting the ipod to pc the ipod screen is white with "do not disconnect" but it is taking along time

    On Connecting my new ipod nano 7th generation to pc win 7 pc pop a message that it need to format that space. after formatting i tried to open the ipod it said connect to itunes to restore just when i connected it to the pc it turned white with "do not disconnect" but i didn't do anything on itunes i can't see it on itunes and it is taking along time is this normal

    - Try another cable.
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Try on another computer to determine if computer or iPod problem
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • 'Ringtones'  tab  after connecting the device.

    i know that one.
    what i'm asking is how to get 'Ringtones' tab when  device connected in.
    Here i'll show you the page.
    this is what i want.
    tell me how to get it.
    i had many edited ringtones & they are also ther in itunes .
    mine is windows 7 & had itunes 10.5
    wait another question after getting it if i sync. the ringtones then will it display on my iphone 4s?

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • After connecting the addon, menu not shown & error "form not found" appears

    Dear users,
    I am using SAP business one 2007 A, I have developed a simple add-on containing one form and positioned under Sales - A/R through B1DE 2.0 code generator wizard and created its installer through simple installer wizard.The add-on is successfully installed and connected but Menu does not display and a blank command prompt window appears and after this an error is shown "path ...\form.xml not found"
    Any one who can help me in this is welcomed that where I am doing mistakes. Further, I also don't know how to work with form, items and event listeners. I am new in this and that's why for sample purpose developed this add-on through wizards, and also i didn't add listeners.
    Thanks in advance,
    Farhan

    you are not adding the form while making the addon using B1DE.
    Follow the steps
    1) In vs2003/05 , create new project -> choose SAP B1 Addon Installer.NET Wizad-> Give the solution Name->click ok->Give name to the particular Addon(without any space),version no, time->Add exe, SAPbouiDLL,And SAPbobsDLL -> Click AddFiles TAB-> Add your SRF form here-> then build the addon.

  • Reader after connecting the jcop31 card, ATR is displayed incorrectly.why?

    Reader after receiving theNXP jcop31 card, ATR is displayed incorrectly.But the other readers are ok.why?
    Edited by: Suwen on 2012-10-31 上午9:53

    Can you explain what is wrong with the ATR? What do you see? What would you expect?
    - Shane

  • USB device not recognized after connecting the iphone to PC

    Hi all,i have an iphone 3Gs 16 GB.I have some problems with it.Yesterday when I decidet to plug my iphone to PC and update the iOS,windows gives a message:USB device not recognized. ***?! I tried to change the USB cable and no fix,i tried reinstalling iTunes-same thing,I tried on another computer-the same.So in my country there's no apple store just Orange store what sels this mobiles and i took it there, so i'm waiting for the response.What could be with it?! There was no water or physical damage. ?! Thanks a lot

    someone? please

  • How can i see the password after connected the WiFi

    i want to see the wifi password on my iphone 4

    Passwords are encrypted, they do not display or they would not be secure.

  • Unable to connect jms client to stcms in JCAPS62 using admin\adminadmin

    I'm trying a simple java jms client to STCMS in jcaps62 but getting exception
    javax.jms.JMSSecurityException: Access denied by server. Check userid and password.
    at com.stc.jms.sockets.ProxyStcms.newSession(ProxyStcms.java:271)
    The following is my code snippet:
    Properties p = new Properties();
                   p.put(InitialContext.INITIAL_CONTEXT_FACTORY,
                             "com.stc.jms.jndispi.InitialContextFactory");
                   p.put(InitialContext.PROVIDER_URL, "stcms://localhost:18007");
                   p.put(InitialContext.SECURITY_PRINCIPAL, "admin");
                   p.put(InitialContext.SECURITY_CREDENTIALS, "adminadmin");               
                   p.put("com.stc.jms.jndispi.disconnected", "true");
                   InitialContext ctx = new InitialContext(p);
                   QueueConnectionFactory fact = (STCQueueConnectionFactory) ctx.lookup("connectionfactories/queueconnectionfactory");
                   Connection conn = fact.createConnection();
                   Session session = (Session) conn.createSession(false, Session.AUTO_ACKNOWLEDGE);
    Could any one throw some light on this
    Note: I have tried encrypting "adminadmin" and pass it, but no luck.

    yes it is working with in collaboration etc., with in GF and working when removed security for stcms. But here is it, I could able to connect to it through JMSJCA rar.

Maybe you are looking for