After Deploye application How can user take data back up.

Hi,
i have created an application .Which is run in offline Mode in a machine .User enter data through this Application Form .Data Enter Though this Form in to our application data base table .
Here User want to take data back up in evening which is enter by User in a day .
How Can User Take Full Day Data Back up.Whicj are enter by User.
How Can I do This .
i have install XE in my machine .When i click On Start-->All Program -->Oracle database 10g Express Edition -->Backup Database
What is the use of Backup Database .
Thanks & Regards
Manoj Kaushik
Edited by: Manoj Kaushik on Mar 17, 2010 10:40 PM

Similar Messages

My iphone has crashed after downloding ios7,how can i reset it back

my iphone has crashed after downloding ios7,how can i reset it back???

Adnan Kavak wrote:
my iphone has crashed ...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Lost some apps after syncing/restoring, how to get lost data back?

I updated the firmware of my iPhone 3GS to iOS 5.1 yesterday. After the update, I noticed that I have lost all of my contacts on the phone, so I plugged it back in to the computer and went with "Restore from backup", which was dated just a few hours prior to updating the firmware.
After it finished restoring, my contacts were all back but half of my apps are missing. I tried redownloading from the App Store as well as syncing from the computer, but the data (game saves, etc) are still missing. How do I get them back?

It's still listed there, dated around 5 hours before I updated. I right-clicked on my iPhone and chose "Restore from backup" and they still weren't there.
Most of the apps that I lost were downloaded within the last 6 months, but the apps that remained contained data that are up to date (to just before the update).
In other words, half of my apps are up to date while the rest are completely missing their data.

HT1925 i have delete whatsapp by mistake and now the new version is not compatible with my iphone, how can i take it back again ?

Hello i need help, i unloaded the new version of whatsapp and now is not working because my phone is not compatible, i delete it, and now i can not unloaded it again ! how can i unload the old version again ? thanks

If you did not make a backup of the old version of the app before you deleted it, there's no way you can get it back now. The current version should still work on your iPhone 3GS, though. You just need iOS 4.3 or later, so if your iPhone still has an older version, update to the latest iOS.
If, however, you really have an iPhone 3G, not a 3GS, then unless again you make a backup copy of the old version of the app, there's nothing you can do until you're ready to get a newer iPhone since iOS 4.2.1 is the final version your iPhone 3G will run.
This question, by the way, would have better been posted in the Using iPhone forum rather than here in the QuickTime forum.
Regards.

How can I take data from specific column in a table using VBA

Hi
I do not know how to take the values from the last column in a table, I know how to look over each row but I cannot take the last column values for each row I pass by.
This is the table for example:
| Date | Account1 | Account2 | Description | Amount |
|12/03/2008 | 123-32 | 325-78 | None | $50 |
|12/03/2008 | 123-32 | 325-78 | None | $20 |
|12/03/2008 | 123-32 | 325-78 | None | $10 |
|12/03/2008 | 123-32 | 325-78 | None | $40 |
I am using this code as a reference that User FiveNines gave me to loop through all the rows in the table, so What I need is to take the values of the column Amount for each row I go through.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
Dim rButton As HTMLInputElement
' ******** This would be your global variable. I put this so that values are seperated by a semicolin you can use what ever format works for you.
strValue = "03/22/2008;03/22/2008;*************1977;*************1977;$25.25;Jan, Jun, Jul, Dec"
' Strip out the ; for inner text comparison
strValue = Replace(strValue, ";", "")
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
For Each tblRow In tbl.rows
If tblRow.innerText = strValue Then
RSWApp.WriteToLog "Tables", "Passed", "Row is Present", True
End If
Next
End Sub

Hi Lippix.
This is code that will loop the rows then loop the cells and check for "$" which will return dollar values. I also attached a script.
Private Sub RSWVBAPage_afterPlay()
Dim tbl As HTMLTable
Dim tblRow As HTMLTableRow
Dim tblCell As HTMLTableCell
Dim strValue As String
' This will get the table but can be modifoed to be more specific
Set tbl = RSWApp.om.FindElement(, "TABLE")
' This loops through all the rows in the table until a match to the strValue is found
For Each tblRow In tbl.rows
  For Each tblCell In tblRow.cells
' cycle through the cells and only report those with a dollar value by searching for $
    If InStr(1, tblCell.innerText, "$") <> 0 Then
   RSWApp.WriteToLog tblCell.innerText
   End If
Next
Next
End Sub

How can I take data from multiple pages documents and put them into a numbers table?

I produce invoices in pages, with dates, invoice numbers, references and amounts due. I want to take all this data from multiple documents and transfeer it to a single numbers table. Is this possible and if so, how do I do it. I know I can do it the other way round with mail merge but I can't figure out how to do it this way round?
Thanks,
Keith

The data is spread throughout a pages document in specific areas here's a copy of an invoice for you to have a look at.

How can I get data back that is in the trash?

I don't seem to be able to retreive clips or other data that end up in the trash. When I click on the trash icon contained in the app I am only given the option of Cancel or Empty. Is that it? Once the data is in there it's gone? Thanks.

iMovie 4 trash is a sort of virtual trash in that there isn't really a location where things are put (like your system trash) but instead a representation of how much stuff you cut out of your project. If you click empty (and never due that in iMovie 4 as there is a bug that sometimes trashes your project) what happens is iMovie rewrites all the media files to get rid of the stuff you clipped or deleted.
So there are ways to get your stuff back. One way is to select any clip and pick the restore option which will reset the clip back to the way it was before you made cuts. The downside of this is that you lose all your edits on that clip and have to redo them over if the one you wanted to undo is several edits back.
You might try this instead. Assuming your clips are all off the clip shelf and now down on the timeline, grab all the clips on the timeline, hold down the OPTION key and then drag them all back to the Clip Pane. As you drag up there while holding the OPTION key, you should see a green circle with a ( + ) in it. This means you are making a COPY to the shelf, not moving them. Drop them on the clip shelf. Now select clips on the shelf and do a restore on them from that location. I think this will let you restore the clips to their original size on the shelf while the ones on the timeline will remain untouched. Hopefully you will find what you lost.
In the future, the best way to edit in iM4 to avoid this sort of thing is to import all your clips normally onto the clip shelf on the upper right side. Now rather than dragging them down to the timeline (removing them from the clip shelf) and editing them, OPTION drag them to the timeline which will make a copy to the timeline rather than a move. Don't worry about drive space. When you make copies, they are not real copies (the media files are not duplicated) but instead just additional virtual copies, so you can make as many as you want with very little impact on drive space.
Now you can edit to your heart's content on the timeline and if you ever make a mistake or need to get back a piece of clip you deleted, the full copy remains safe and unedited up and over on the clip shelf. You can always drag down additional copies if you need to get back footage or if you want to use the same footage more than once.
Patrick

How can I get data back with Straight Talk on my 3gs

I have an iPhone 3GS that I no longer use. I gave it to my daughter and set it up on Straight Talk. Everything was working perfectly except MMS until Monday afternoon ( 7 January) when 3G just disappeared. I called Straight Talk customer service, which really *****, and was told because of an update they did, my phone will no longer connect to data. Surely there is a way for me to fix this problem, short of the fact they may just be lying to me. I had previously installed unlockit and it worked flawlessly.
Can anyone out there please help me? I'm a retired high school math teacher but I still would need your advice to be step by step.
Any help would be so very appreciated.

Hi there Nambin15,
There a a few recovery options for forgotten password that are availabe. I recommnd taking a look at the article below for more infomation on all your options.
If you forgot your Apple ID password
-Griff W.

How can I take pictures back from a DVD created on my Mac and put them back in iPhoto?..

I made a DVD from iPhoto and iMovie but I accidentally deleted the photos from iPhoto. The only copy I hav is a DVD. Is there a way to get the pictures from the DVD back to iPhoto?

Hi
As Old Toad writes. No You can not get 100% quality back.
You can though.
Play DVD with VLC-player
PAUSE
cmd+Shift+4 - click and select photo area - or -
cmd+Shift+3 - click and make a ScreenDump
Quality will be - size of the screen and 72dpi
• So set screen in Max Size e.g. 1440x900 or more
• BUT as DVD is interlaced SD-Video - no setting will be any better than this
And that will be the best You can do - still POOR - but usually better than Nothing !
NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
PAL (25 fps) 625 lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
And if You creaded Your movie in iMovie'08 to 11 - only half of the line resolution is left - So I guess that
320 x 480 or
384 x 576
Will be the best possible resulting photos.
Yours Bengt W

Youtube was deleted from my ipad after an update. how can I get it back?

I updated my iPad 2 and youtube got deleted somehow. It is not under restrictions, and I don't want to have to restore my entire iPad. What do I do?

YouTube is not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
See this similar post https://discussions.apple.com/thread/4335468?tstart=30
 Cheers, Tom

All info gone after software update, how can i get it back?

New G3, notified me I needed to sync w/itunes to get the new update. After syncing, and various problems and errors, it said i needed to restore my iphone... everything would be wiped clean +but i could get it back+ after the update was complete. Update is complete, where is the option to put all of my stuff back on my phone? My contacts, my appointments, my alarms, my life... aargh!

Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

How can I import data from a csv file into databse using utl_file?

Hi,
I have two machines (os is windows and database is oracle 10g) that are not connected to each other and both are having the same database schema but data is all different.
Now on one machine, I want to take dump of all the tables into csv files. e.g. if my table name is test then the exported file is test.csv and if the table name is sample then csv file name is sample.csv and so on.
Now I want to import the data from these csv files into the tables on second machine. if I've 50 such csv files, then data should be written to 50 tables.
I am new to this. Could anyone please let me know how can I import data back into tables. i can't use sqlloader as I've to satisfy a few conditions while loading the data into tables. I am stuck and not able to proceed.
Please let me know how can I do this.
Thanks,
Shilpi

Why you want to export into .csv file.Why not export/import? What is your oracle version?
Read http://www.oracle-base.com/articles/10g/oracle-data-pump-10g.php
Regards
Biju

How can we take print out for challen no. create d by J1INCHLN

hi,.
actually i forgot to take print after running J1INCHLN .
how can we take printout or display without running J1INCHLN .
one challen number is created , is there any tcode to view or print.
regards.
hari priya

hi,
We can use the T.code J1INMIS. GOTO Report selection option & select challan Update status.
Excute the report. you will get a list of all bank challan made so far. Then select the required document & take print.
The Process is :
Invoice in FB60/MIRO
Bank Remittance - J1INCHLN
Bank Challn Update - J1INBANK
TDS Print - J1INCERT.
assign points if found useful
Regards,
R.Ramakrishnaraj

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.

I am using UPK developer 12.1.0 single user. My sofware has crashed and needs reinstallation. Please suggest how can I take back up of my source files. I am unable to open the application and i can not locate the library backup folder on my local machine.
Also, does reinstallation takes the back up automatically or the files will be lost. Please help.

Here are a bunch of scripts to get folder size under all circumstances. Take your pick.
https://gallery.technet.microsoft.com/scriptcenter/site/search?query=get%20folder%20size&f%5B0%5D.Value=get%20folder%20size&f%5B0%5D.Type=SearchText&ac=2
¯\_(ツ)_/¯

How can I take out all my HealthVault data?

As titled, how can I take out all my HealthVault data?

Hi,
I'm assuming by "take out" you mean you want to save copies of your data to keep outside of HealthVault.
In general, you want to use the Export feature. Find it by going to the Health Information page, then in the "More actions" menu, choose "Export information." If you're trying to send the data to another system, then you'll probably want to choose CCD or
CCR format. If you are keeping records for yourself, HTML would be the human-readable format. The different formats behave differently, so I'd recommend checking that the exported file contains the data you want.
After you export, then you'll want to go into the Files section of the Health Information page and download the files you want to keep. This will be especially important for files that came from a doctor, hospital, pharmacy, or lab.
If you want to close your HealthVault account, make sure you've got all the data you want before you close the account. By the way, if by "take out" the data you meant "delete" the data, when you close your account the data will be deleted from HealthVault
as per the Privacy Statement.
Hope this helps,
Kathy

After Deploye application How can user take data back up.

Similar Messages

Maybe you are looking for