After downloading itunes, and clicking RUN, error message reads...This installation package could not be opened.Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer
any suggestions for this? I am running 64-bit, pop-up and firewall turned off, still get the error.
tried downloading the quicktime installer, I get the same message with it too
Similar Messages
-
whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally. -
When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?
Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
mI am trying to download iTunes to my Sony PC, but I keep getting the following error after initial download attempt:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."
I have Windows 7 Home Premium, Service Pack 1.
Any help is greatly appreciated.Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy -
I have had to take my pc back to factory settins, so lost my itunes, tried to install again getting message saying
the installation package could not be opened verify the package exists and that you can access it or contact the vendor to verify that this is a valid windows package,Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
installation package could not be opened verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows package installler what can i do ? help me
Hi,
Firstly make sure you save it to your hard disk, and then run setup from there.
If it doesn't help, you may also try to unregister Windows Installer, and then reregister Windows Installer and check if it helps. To do this, follow these steps:
1. Press Windows Key + R
2. In the "run" box, type "msiexec /unreg", and then press ENTER.
3. Press Windows Key + R
4. In the "run" box, type "msiexec /regserver", and then press ENTER.
Besides that, You could try to create a new user to download and install the application.
Karen Hu
TechNet Community Support -
Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer packageHello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M. -
this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package how can i istaller itunes in my laptop windows 7 64 bits
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.
I wish I knew because i'm having the same problem. As soon as I find the answer I will post.
-
Ever time I try to download itune on my new packard bell I get the message "this instillation package could not be opened. verify that the package existsmand that you can access it or contact the application vendor to verify that this is a valid windows installed package" PLEEEEASE someone help me as I've lost all of my music!
tried downloading the quicktime installer, I get the same message with it too
-
ERROR: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." I have tried everything which I found on google and apple community. Does anybody have the exact solution? PLEASE HELP!
What has this to do with the application Front Row which this forum covers?
What are you trying to install, on what Mac, with what version of OS X? -
I have tried and tried to install itunes on my mums zoostorm windows 7 64-bit pc and it comes up with this message "this installation package could not be opened, verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package" i have tried everything that i have been told to do and nothing has worked but then i try to install it on her toshiba satellite pro windows 7 32-bit as she reset it back to factor settings she has done ALL updates she had itunes on her laptop before but when we went to install it back on the laptop it cam up with the same message as it did on the pc i would really like it if someone can please help with this problem as i am getting so annoyed with it. I have a zoostorm windos 7 32-bit laptop and i have reset that bk to factory settings and i installed itunes on there with no problems so a soultion would be really great.
Many thanks DonnaI'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?
At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2
Maybe you are looking for
-
Create a new view under a component in IC Webclient UI
Hi , Can anyone tell how to create a new view under a component in IC Webclient UI. Regards, Sijo
-
My external Hard Drive won't transfer files to Mac HD and causes Finder to crash
My external Hard Drive (Western Digital 2TB hard drive in a ICYBOX 2-bay USB 2.0 HD Dock) won't transfer files to the Mac HD. The transfer box comes up but stays at the 'estimating time' stage and remains like that. No matter how big the file/group o
-
Here's more info. Bought the iMac in Nov. 2009. It's been one with lots of problems, including a new mother board. Haven't had any big troubles lately until now. The exact error is: Invalid volume file count (It should be 888333 instead of 888334) In
-
Migration from TAXINJ to TAXINN
Dear All, Can any one guide how to MIGRATE form TAXINJ to TAXINN tax procedure. If we are changing the to TAXINN what will be its impact to previous document of PO and its subsequent GR
-
Hi, I've got a new iMac Aluminum 20"... After I unbox it and install all the updates (10.5.7 and some firmware update) I realized that my bluetooth icon in the status bar was missing... I opened system preferences pane and there was no bluetooth ther