After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

With both my Mac's, reset Photoshop C (2014) to previous version 2014.0. Now find that after editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated. Reloaded camera raw, etc., but still find modification dates are not updated, either using Finder or using Bridge to view dates. Editing other files, PSD, DNG, TIFF, etc., are updated and the information is correctly displayed.

Ok, not entirely sure what I did but it's now working (Bizarre!). The only thing I did was 'eject' the ACR 8.6 .dmg file from the finder side bar and restart PS CC, so that may have been where I was going wrong all along!
However, I now have another issue in that there is no preview of the shot in Finder on my iMac when I highlight the NEF file. I assume this is simply because Apple haven't yet released an update for the new D810 NEF files and so the computer doesn't know what it's looking at?!?
If anyone has any other ideas though, then I'm more than willing to listen.
Thanks again.

Similar Messages

File-to-rfc ..database tables are not updating??

hi xi friends..
in my file -to-rfc scenario.. without BPM ..
in sxmb_moni..it is showing successfull.. database tables in sap not updating..
my source structure..
workorders 1..1
..order 1..unbounded
...id
...operation 1..unbounded
.....id
.....closingdate
.....status
.....comment
my target is Zbapi_alm_conf_create..
Zbapi_alm_conf_create
...Zdetail_return 1..1
.....item 0..unbounded
...Ztimetickets
.....item 0..unbounded
.......orderid
.......operation
.......fin_conf
.......con_text
.......exec_fin_date
in message mapping:
MM_file_to_zrfc
i changed the occurance of target to unbounded..
message mapping like this..
my source structure..
workorders 1..1
..order 1..unbounded   --------->Zrfc 0..unbouned
...id                  --------->Ztimetickets-item-order
...operation 1..unbounded ------>Ztimetickets-item 0..unbounded
.....id                ---------->Ztimeticktes-item-operation
.....closingdate       ----------->Ztimeticktes-item-exec_fin_date
.....status            ----------->Ztimetickets-item-fin_conf
.....comment           ------------>Ztimeticktes-item-conf_text
and also in interfacemapping ,changed the target occurance to unbounded.
and in ID ,interface determination using enhanced i selected interface mapping with occurance unbounded..
in sxmb_moni it is showing success..
in adapter monetering( receiver).
<i>Receiver channel 'cc_sap_work' for party '', service 'SAP_ERP__DEV' (internal name 'RfcClient[cc_sap_work]')
Client data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=aar, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Repository data: {jco.client.lang=EN, jco.client.snc_mode=0, jco.client.client=400, jco.client.passwd=****, jco.webas.ignore_jdsr_error=1, jco.client.user=thotv, jco.client.sysnr=10, jco.client.ashost=53.247.192.84}
Current pool size: 0, maximum pool size : 1
Channel History
- OK: 2006-12-31 14:19:47 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE
- OK: 2006-12-31 14:18:50 CET: Message processed for interface ZBAPI_ALM_CONF_CREATE</i>
but the database tables are not updating..if i execute ZBAPI_ALM_CONF_CREATE manually in SAP ..tables are updating...
please guide me...
thanks in advance...
regards
Ram

Hi..
my mappis is like this..
message                   message
.message1                         message1
..workorders 1..1
..order 1..unbounded   -
>Zrfc 0..unbouned
...id                  -
>Ztimetickets-item-order
...operation 1..unbounded -
>Ztimetickets-item 0..unbounded
.....id                -
>Ztimeticktes-item-operation
.....closingdate       -
>Ztimeticktes-item-exec_fin_date
.....status            -
>Ztimetickets-item-fin_conf
.....comment           -
>Ztimeticktes-item-conf_text
i didnt mapped message at root..is this necessary to mapp messages??
please tell me
regards
ram

Deactivation date is not updating in Asset Master after retirement (ABAON)

Dear Experts,
Asset Capitalized on: 28.02.2009 and depreciation key used as: LINK-Str.-line from acq.value to zero without interest. Asset Retirement done with revenue (210) on 31.05.2009. We do have depreciation like (01 book depreciation, 15 Tax depreciation, 30 Local GAAP book depreciation). Below is the asset and class:
Asset name: Maruti Baleno
Asset Class: Vehicles
Here my question is after retirement done with the transaction code: ABAON u201CDeactivation onu201D date is not updating automatically in the system, however when am trying to update manually the system showing error like u201CDeactivation not possible. Dep.area 15 has acquisition values.
When am trying to do same transaction with T code: u201CABAVNu201D, the system updating the deactivation date.
Can anybody explain me why the above error happening and why the deactivation date is not updating with t code: ABAON.
Thanks,
Francis.J

Dear Atif Farooq,
In the AO74 the transaction types (Deactivate fixed asset check box also ticked)
200 Retirement without revenue
210 Retirement with revenue
When am trying to update manually below error appearing in AS02
Deactivation not possible. Dep.area 15 has acquisition values
Message no. AA296
Diagnosis
You cannot deactivate, since acquisition values are still present in depreciation area 15.
Procedure
Deactivation can only be posted by a complete retirement/transfer. The deactivation date is then set automatically.
The above asset procured in the year of 2009 and same has been retired 2009.
Thanks,
Francis J

How to get iTunes to update artist/album folder names after editing file metadata

If I edit the metadata for a song, such as the song title, it updates the actual file on my computer as well. However, if I edit the album name or artist name, it does not update the artist or album folders. Is there a way to force iTunes to do this? I have music coming from 3 different sources, Amazon, iTunes, and CD rips, and it's very common for artist names to appear differently from different sources. I'd like to be able to just add everything to iTunes, update any inconsistencies, and then have those changes automaticaly be reflected in my \iTunes Media\Music folder. Is that possible? Otherwise I end up with multiple folders for the same artist.

Check the option to Keep iTunes Media organized under Edit > Preferences > Advanced. The Copy files to iTunes Media folder option should also be checked if you want to make sure that all media is stored under the iTunes Media folders.

Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

Even when I charge my Mac Pro to the full bar, the battery seems to be drained even when I am not using it. Example, after charging it full, i switched it on the next day and its 79% battery left. Is there something wrong? help please

Assuming you are disconnecting from line power, when you say switched on, do you mean it was shutdown or in sleep mode? If sleep mode the battery will still drain because sleep still keeps some things active and the battery does drain a little. However, to go from 100% to 79% charge overnight is a bit excessive in sleep mode. Unless you have some processes set to activate over night by the cron file and do things like backup the system.
What are the statistics on the battery, the apple in the upper left corner, About This Mac, More Info, System Report, Hardware, Power...things like battery Condition, Capacity, remaining charge, voltage, current.

After editing in perfect photo I cannot unstack the edited photo in LR4.

After editing in perfect photo I cannot unstack the edited photo in LR4. The thumbnail shows the number of photos in the stack, but right click/expand stack has no effect. The edited photo is not showing.

The edited photo (assumed to be a TIFF, created via Edit In or an Export plugin) might need to be added to the catalogue. The plugin should arguably do this but I’ve had issues in the past where this didn’t happen. Try adding the newly edited image using the Import dialogue - any images in the folder not already in the catalogue will be ticked.
NB You might find the newly added image on the far right of the filmstrip.

My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>

Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

When importing files, folders are not updated?

Could anyone please help?
Since I reinstalled Lightroom on a new harddrive (after a crash) whenever I import photos into my library, they appear in "Previous Import", but they are not visible in the destination folder. Even if I, in the import screen, make a new folder, this folder does not appear in the library, folders column untill I manually synchronize the parent folder.
Could anyone give me advice as to how to correct this problem?
Thanks
Micha

Thanks for your answer.
Do you have the option "Do not import duplicates" enabled in Aperture's Import panel?
Yes I have.(But it should anyway show folders. It doesn't scan automatically all folders and subfolders. So I should see something).
When did this problem start? Directly after you upgraded to Mavericks or before?
It started few days ago. I did not update anything or I did not install anything new software etc.
What is the file system on your drive "Kovalevy"?
It should be HFS or HFS Plus? I use these disks only with this Mac.
Is it formatted for Mac? MacOS Extended (Journaled)? Is the drive directly connected? And the what are the permissions on this drive? Have you tried to set the "Ignore Ownership on this volume" option? You can set it in the "File > Get Info" panel for the drive in the Finder: This panel will also show you the file system in the "General" brick.
It is formated MacOS Extended (Journaled).
Yes I tried "Ignore Ownership on this volume". No effect.
I don't have any problems with Finder, Final Cut etc. I can open projects, copy files etc.
Thanks for your time.
Br,
Marko

Shaped layers are not updating in ae after changing them in Photoshop

I created a photoshop CS3 file that has a grid and 3 layers with editable shapes (a graph that has to be changed daily). When importing them into AE CS3 as a comp cropped layers, After Effects sees the layers and layer masks correctly. The problem is when we go back into photoshop and only change the points on the shape layers, save the file, and open the saved After Effects file, the shaped layers are not updated. Even the reload footage does no avail .
Steps to reproduce issue
1. Create a layer in photoshop and make a shape
2. Save the photoshop file.
3. Import the Photoshop file in After Effects as a comp
4. Save the After Effects Project
5. Reopen the photoshop file and edit points on the shape layer.
6. Save the Photoshop file
7. Open the After Effects project.
8. The SHAPE layer WILL NOT UPDATE. The mask is still the same as the original first saved file.

No, they don't. Andrew is correct. Once imported, shape paths from PSDs will become masks and those have no relation to any external reference items. They are AE-internal. The apparent question is, how complex your graphs are. If you check out one of my old tutorials on creativeCOW you can find a line chart rigged with expressions and thus fully editable from within AE. Similar projects can be created for other chart types and in fact I had several of them already on my website (and will provide them again, if and when I get around to finally updating it). Also do not forget that you could use plugins such as Digital Anarchy's Data Animator (now owned by Red Giant and being reworked into an updated version called Datamator)...
Mylenium

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there

When I try to import .olm files from my external hard drive back up, where do they go? It says on different forums they go to the "on my computer" folder but they are not there.
I go through all the instructions but then my emails do not appear. I'm starting to panic a bit!

You might want to try asking on the MS Office Outlook forum - http://answers.microsoft.com/en-us/mac/forum/macoutlook - since those are Outlook files.
Also note which method you're using to create a backup.
Clinton

I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

I cannot open RAW files in photoshop elements 10. there are no updates and have tried installing raw 6.6 updates and it fails

Here is the ACR 6.7 Windows installer for Elements 10:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5383

When I try to edit my payment method it keeps saving the old card and not updating to the new one?

When I try to edit my payment method it keeps saving the old card and not updating to the new one?

You likely need to change the default application(s) assigned for opening files to point to the new ones. HOw you do that depends on which operating system you have. If you search Google you should be able to find out how to change the default programs for different files.

HT201077 After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!

After updating my iPhone4s to the lastest update my photostream stopped updated onto my comuter. From my phone it looks like pictures have been moved into the photostream folder... but they are not showing up on my computer. Help!
I have signed out then back into the cloud. I have comfirmed location of the photostream folder. I have have even restored settings on my phone. any ideas on what I can do to get it working again? or do I have to accept defect, and manually save my photos?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

TS4425 when trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

When trying to access photo stream on Apple TV, I am getting the error message terms and conditions have changed, but when I go into iCloud on my Mac the new terms and conditions are not appearing - How can I manually agree to them ?

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

Can't add music my iPhone from iTunes. When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load. [Manually manage music and videos] is checked. And, this is the only Mac I have ever used to

Can't add music my iPhone from iTunes.
When I try to drag a song over to my phone, I get the circle w/ the syncing line through it, but it does not update/load.
[Manually manage music and videos] is checked. And, this is the only Mac I have ever used to add music to my phone.
Also, just updated the phone's software today, and iTunes' software is already up to date.

Hi Gregg,
Have you tried resetting the device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Home screen redisplays, see if your Music app is behaving normally.
Cheers,
GB

After editing file in ACR 8.6 (Mac) , the file (NEF and XMP) modification dates are not updated

Similar Messages

Maybe you are looking for