After editing, picture shows broken icons

Recently while editing some (not all) pictures, I am getting a broken icon for the edited picture. I have updated my elements 12, but that did not help.
Thanks in advance for any help you have for me.
Mark

You have to provide system information and better explanations of what you actualyl do. In any case, the PSE forum is a much better place to ask such questions.
Mylenium

Similar Messages

  • Photoshop Album 1.0: How do I reconnect 350 "edited pictures" showing as disconnected files?

    I purchased and downloaded PS Elements 13 64-bit Win7 from the Adobe website to a new Dell Inspirion 64-bit with Win 7 Pro.  I have previously been using a registered copy of Photoshop Album 1.0 and Photoshop Elements 2.0 since 2005.  The most recent use was on a computer running Windows 7 Pro operating system using the virtual XP to run PSE.  That computer was fried by a lightning strike.  However, I retrieved the hard drive in good working order with files intact.  I am currently running the PSE program on an old PC with XP and accessing the picture files (9,600) on the old hard drive attached as an external J: drive.  My goal is to transfer all picture files to the new Dell Inspirion where the new PSE 13 resides.  I couldn’t get the PSE 2.0 program to access the picture files!
    I finally figured out how to use MS Access to change the drive reference to J:/.
    1) there were a number of line items that seemed to be anomalies in the Access table.  Could these be a cause for the following disconnects?
    It seemed that I was about prepared to transition to the new computer and PSE 13, but then after opening PSE 2.0, I found I still had about 350 disconnected files (indicated by a “?” in place of the pic icon).  I then determined that most, if not all of the disconnects, had one thing in common: they were all “edited pictures” and obviously some of my most valued pictures.  I have started to reconnect them one at a time, but it’s very time consuming!
    2) Is there a more efficient way to accomplish these reconnections?
    If I understand it correctly, the PSE acts like a card catalog in the library where it simply references the actual location of the original and/or edited files.
    3) Ultimately, how do I transfer all the reconnected pictures and the associated files and folders to the new computer?
    Thanks for any advice or assistance you can offer!
    <edited by admin to be readable>

    Thanks for your quick response.  I respectfully question with your conclusion that I am in the wrong forum!  Adobe Photoshop Album v 1.0 is the specific program I have used for nine years and that is the program I just reopened to verify it's title and that is the program wherein all the Adobe advice is to reconnect all my files before proceeding to convert to Photoshop Elements 13.  The original box describes it as "The fast and easy way to organize and share your lifetime of photos." My apologies for even mentioning the Photoshop Elements 2.0 (the original box describes it as "image-editing software" which I seldom ever used.  Apparently the functions of PSA & PSE has changed over the many versions, as I first went to the Elements forum and  I can't seem to find anyone in the PSE forum to offer any help.  Is Photoshop forum not the forum that would deal with Photoshop Album? There is a forum I see for Photoshop Album Starter Edition, but a quick review of messages seems to relate to something more recent than my product which is not entitled Starter Edition.  Thanks for any clarification in getting me to the right forum if this is not it! 

  • Volumes keys showing "broken icon" symbol on MBP

    I am having volume issues on my 2011 MPB running Lion.  When I start my computer it makes the start up noise, and I am also running Windows 7 with BootCamp, and the volume works there. 
    On my Mac side however, I am getting a broken icon symbol when I hit the volume buttons, and I also cannot control volume throung the pull dowm bar on the upper portion of the screen.  No volume is working.
    I have done all my updates, and I have reset my PRAM (which was only a temporary fix).
    Any suggestions?
    Thanks

    Under out output device it says "Digital Output" and has a check mark beside it.  This is the only option.  Under input device it says "internal microphone" and "line in", and internal microphone is checked.
    It is a 15''.

  • Missing EXIF data after editing picture

    Hi,
    I've noticed that PSE 12 editor no longer writes the EXIF data from the original image.
    I believe this started after upgrading to the most recent version of PSE 12 via Help -> Updates
    Do you have any suggestions?
    Regards,
    Mike
    Before:
    After:

    1/ to answer your question:
    I don't have any user generated tags/kewords/captions on these historical pictures - but normal metadata (camera EXIF data) is showing up fine on flickr.
    2/ I went ahead and tried Jeffery Friedl's Flickr Lightroom publishing plugin - it works well and GPS data is correctly picked up by Flickr.
    so - unless anyone can demonstrate a working adobe flickr publishing setup with gps data I will assume it doesn't work and continue to use jeffery's.
    Thanks
    Bill

  • IMac fails to boot after restart. Shows folder icon with ?

    I have managead to boot up from start up disc previously.  I did a hardward scan and it stated my hardware was fine. It is my understanding the folder icon with the "?" means that the iMac can't find the OS. I thought maybe I had a corrupted spot on my HD where the OS is, and tried to re-install, and I wasn't allowed to re-install.  Do you think my HD is bad, or maybe I have a virus? I'm ashamed to admit that my anti-virus software had been expired for a bit.  I should also mention I am running OSX Tiger. I know, bad Apple geek, but it more than served my needs.  This is last ditched effort before I take it in for service.

    Highly unlikely it's a virus.
    The question mark on startup can mean several things. One the hard drive is failing or failed or your Mac cannot locate a System Folder to boot from.
    Try starting up while holding down the Option key. If there's a volume to boot from you'll see the Startup Manager window where you can select the startup disk to restart from.
    A flashing question mark appears when you start your Mac
    and tried to re-install, and I wasn't allowed to re-install.
    Not a good sign.   

  • I was updating new OS with itune after that my IPhone is showing itune icon and usb connect icon. it is not starting.

    I was updating new OS with itune to my Iphone 4S. it stuck in mid and showing itune and usb connect icon. After restart also, showing same icone. it is unable to connect with itune after multiple tries also. would you please help me to rectify this problem?

    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success
    NOTE:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • TS4253 Unable to import edited pictures from Iphone 5s

    I am not able to import photos on my computer I edited in iphoto on my Iphone 5s. The edited pictures show on my camera roll, but when I connect my phone, they do not appear (only the originals are there)! I have all the latest versions of all the programs and I tried to import the pictures using both Iphoto and lightroom. Can anyone help!?

    https://discussions.apple.com/message/25563714?ac_cid=tw123456#25563714
    Follow this thread. It will give an answer.

  • Slideshow in Elements 9: Shows some pictures as "broken"

    Hi
    When I run a slideshow from Elements 9, the "View/Edit/Organisein Full screen" option, quite a few of the pictures appear "broken" and a "broken" type icon appears.  It seems to get worse after that. I'm showing an album of 90 pictures, mixture of JPEG, PSD, RAW files.  At first I though the app only supported JPEG but when I stop at the broken file, locate it, and start the slideshow from there, it dissplays fine.
    Is this a known bug or limitation?  Any fix or workaround?
    I have PSE9 and 9.0.3.0 patch installed.  Running on a i7 Dell PC with 4GB RAM (so in  theory plenty horsepower)
    Any advice appreciated
    thanks
    Stephen

    Please ensure that Thumnails are properly gereated for all the files in your catalog. This happens usually when bigger size thumbnail is not readily available to show.
    + http://bit.ly/plFUdD

  • PSE 10 will not edit large picture files after it accepts them. After editing it either changes jpeg to psd or greys out the file.  What must I do?

    PSE 10 allows large picture files into the organizer and editor but after editing, saving, and closing, the jpeg returns to the organizer either with a psd file extension or as a greyed out broken photo icon . Why does it cause users to waste time editing files that are too large. How do I solve the problem?

    See:
    Photoshop Elements Help | Maximum image size limits in Photoshop Elements

  • Photo Icons Not Changing After Editing  - Help!

    Hello,
    I recently upgraded to Lion and just like Snow Leopard the photo icons have white borders around them, which is fine. The problem is that even after editing the photos in both Lightroom 3 and Photoshop CS5, the icons don't change by removing the white border like they used to in Snow Leopard. If I turn off the show icon preview, the icons don't show the image of course, but still don't change after editing. I liked being able to tell which ones I had already edited and which ones I still needed to edit. Can anyone help me with this? Maybe I have some setting I need to change? I want the icon to change after editing by either showing the picture or showing the picture w/o border like it used to. Thanks!

    On your Mac disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • IPhoto does not show any of my edited pictures

    I recently upgraded from SL to Lion. After that, all I wanted to restore was iphoto, so I restored the iphoto folder. After that all my events but five was black and showed no pictures, all thumbs was corrupt etc. So I started iPhoto while holding two keys down, like I read I should, and then I restored everything but one option. I left it for the night as it seemed to take for ever. Today everything looked fine, great! Or.. no all photos I ever edited looks as they originaly did. All modifications are gone, atleast thats what I thought but then I looked in the iphoto folder and the modified folder is still there and full of photos. If I click edit on a previously edited picture I see the modified version ... when I return to event or album view, it shows orignal again. Help please!

    Where did you restore the library from?  Time Machine?  If so resore it again (you can keep both) and when the library has been restored download and run  BatChmod  on the library with the settings in the screenshot below:
    Click to view full size
    Launch iPhoto and check your edited photos.  If that doesn't  help try rebuilding the library using  iPhoto Library Manager  as follows:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password.  It seems the only way to make it work it to turn it off the back button.

    After my computer has been asleep and I touch my trackpad, it wakes enough to show my icon but not enough to acknowledge my keyboard or trackpad so I can type a password.  It seems the only way to make it work it to turn it off the back button.

    The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
    Now-  "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
    Message was edited by: Apple I0S Help Team

  • Changing user icon in OS X 10.8; "edit picture" button missing!?

    Trying to change my user "avatar/icon/picture" displayed at the login screen.  Usually this is a straight forward process from SysPref --> Users & Groups --> click on the picture -> edit picture -> choose.
    However I've either gone blind or the "edit picture" option is just missing from OS X 10.8 Mountain Lion which seems odd.  Anyone else have this issue or am I just crazy?

    Drag and drop is intuitive from nothing. This is a change of an expected behavior to something very different from before. No first-time pop-up message for returning users, no backup "edit picture" button, nothing. That is poor design. Sure, now that I know about, it works great, but it should be made clear before the user gets to this point.
    I agree fully about the new way to do this being really unintuitive. I bought an MBA 13 two weeks ago, which came with Lion installed. Setting it up was relatively straightforward, even though the old Macs in our house were running Leopard, so I had some learning to go through.
    The MBA died after 10 days, before I had a chance to install Mountain Lion. I replaced it with a MBP 13 today. The Apple support information, OS X Mountain Lion: Add a user picture, still describes the procedure for Lion, makes no mention of this, and is useless. I just wasted an hour trying to figure this out, before stumbling on the answer in this thread (thank you, Fernando.S, for the answer).
    At the moment, I am disgusted with Mountain Lion, which has thrown up one obstacle after another.
    Just so you know, this is not the new way of doing it. It's always worked this way. And the method used, dragging and dropping, has been an essential part of the Mac OS since 1984.
    It's probably not intuitive to some ex-windows users, because in 1984, they were still using menu commands in DOS. IMHO

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi,
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • Can't save pictures on original folder position after edit...since I'm upgraded to IOS7 on IPad2.

    can't save pictures on original folder position after edit, get save popup to save at different position, also still on toubles to get them back to original folder positon since I'm upgraded to IOS7 on IPad2.

    I say the problem is probably noted, and probably will be resolved. Not that i can speak for Apple.  I find the "problems" of wallpaper to be pretty minor compared to the advantages of iOS 7.  The fun of wallpaper has always been pretty insignificant here.

Maybe you are looking for

  • Safari quit unexpectectedly while using the lilbrooksbas.dylib plug-in.

    I can not access my safari due to this message - Sadari quit unexpectedly while using the lilbrooksbas.dylib plug-in. I have tried uninstalling Rapport and restarting but I have had no luck. Please help! Thanks.

  • How can I rotate view of a pdf file, like in earlier versions?

      How can I rotate view of a pdf file, like in earlier versions?

  • LGWR: terminating instance due to error 321

    Hi, I received the below error and terminated oracle service's,How do i resolve it? version:oracle 9.2.0.1 os : windows 2003 Tue Aug 26 04:17:21 2008 Errors in file e:\oracle\sales\admin\bdump\sales_lgwr_2292.trc: ORA-00321: log 1 of thread 1, cannot

  • Is the G4-450 AGP the best Mac ever?

    Have Apple ever made a better Mac than the original G4-450 AGP? Well, it had to happen one day, I am now passing on my 8-1/2 year old G4-450 to my wife. This machine has run every OS from the 8.6 it came with to 10.5 today. It's ease of upgrade is am

  • Best battery practices?

    I'm interested in making my Touch battery last as long as possible. It's suggested, at minimum, to cycle the battery once a month to make sure it's in good health. What's the optimum method for maintaining the health of your battery? Cycle a minimum