After Effects error: Ray-trace 3D ( 5070 :: 12 )

I'm getting the following errors:
After Effects Arror: Ray-traced 3D: Initial shader compile failed.
(50 70 :: 12)
Ray Traced 3d: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver.
( 5070 :: 2)
- What operating system are you using?
Windows 8.1 64bit Pro
Clean install yesterday
- Did you upgrade your operating system from a previous version? If so, which one?
No upgrade. New system build.
- What is the model of your CPU?
Intel i7 5820k - 6core 3.3
- What is the model of your GPU?
EVGA -  GTX 970 FTW - ACX2.0
- What is the version number of your graphics driver? If you have an Nvidia card, what is the version of your CUDA driver?
version 344.75
http://us.download.nvidia.com/Windows/344.75/344.75-win8-win7-winvista-desktop-release-not es.pdf
My cards show up in "Preferences > previews > GPU information". Ray-tracing is set to use unsupported cards.

Forgot to mention, it's 2 GPUs in my machine. They are not in SLI.

Similar Messages

  • After effects error ray- trace 3d initial shader compile failed

    I have an AMD Phenom II X6 1055T Proccesor
    16 GB in RAM
    WIndows 8 64 bits
    NVIDIA QUADRO K4000 ( I have this problem since I've installed this card)
    after effects error ray- trace 3d initial shader compile failed

    Have you added the card by editing supported cards text file as Quadro K4000 was not one of the supported cards for After Effects CS6.
    Try updating the drivers to the latest . Install CUDA driver and check :
    https://developer.nvidia.com/cuda-downloads

  • GTX 970 not supported? After Effects error: Ray-traced 3D: Initial shader compile failed ( 5070 :: 2 )

    I am disappointed to find that my MSI GTX 970 is not supported for Ray-traced 3D in Adobe After Effects CC 2014.
    My configuration:
    Intel Core i7 4790k 4.4GHz
    8GB DDR3 1333MHz RAM (Will be upgrading to 16GB soon)
    MSI GTX 970 Gaming 4G
    Windows 8.1 Pro x64
    GPU Specs:
    Fast Draft:
    Available
    Texture Memory:
    1562 MB
    Ray-tracing:
    CPU
    (GPU not available - incompatible device or CUDA driver)
    OpenGL
    Vendor:
    NVIDIA Corporation
    Device:
    GeForce GTX 970/PCIe/SSE2
    Version:
    2.1.2 NVIDIA 344.75
    Total Memory:
    3.81 GB
    Shader Model:
    4.0 or later
    CUDA
    Driver Version:
    Devices:
    Current Usable Memory:
    Maximum Usable Memory:
    I do have the option to "Enable untested, unsupported CPU for CUDA acceleration or ray-traced 3D renderer" but when I do enable it I get an error saying:
    "After Effects error: Ray-traced 3D: Initial shader compile failed. ( 5070 :: 2 )"
    then
    "After Effects error: Ray-traced 3D: Cannot create context for ray tracer ( 5070 :: 2 )"
    then another
    "After Effects error: Ray-traced 3D: Out of paged mapped memory for ray tracer. Your project may exceed GPU limits. Try closing other applications. Try updating the CUDA driver. ( 5070 :: 2 )"
    I have the most recent Nvidia driver. Anyway to fix this? Or am I going to have to wait for Adobe to support my GPU?

    Hi LMn0P,
    LMn0P wrote:
    I'm hoping Adobe plans to at least recognize these cards one day soon so they don't show up unsupported.  If anything I would expect the newer adobe software to work better with newer cards than it should with 5 year old quadro cards.
    I know a situation like this can be very frustrating, sorry about that.
    Unfortunately, the newer Maxwell NVIDIA GPUs ship without the OptiX Library and acceleration of ray-traced 3D compositions is dependent on that. Therefore, acceleration of these comps will not ever be supported with those GPUs. You may want to reinstall that Quadro card if you plan on doing a lot of ray-traced 3D work.
    The After Effects team does recommend that you move forward with Cinema 4D Lite, as that is what is being tested and supported currently and going into the future.
    Thanks,
    Kevin

  • After Effects Error message @ Startup, NEW Macbook NEED HELP

    So I'm working with a Macbook Pro Retina Mid 2012, I just bought it,
    Processor  2.6 GHz Intel Core i7
    Memory  16 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GT 650M 1024 MB
    Software  OS X 10.8.2
    Installed the most up to date CUDA Mac Driver: CUDA 5.0.37 driver for MAC
    After Effects was running fine -no errors at startup - when I didn't have the GPU CUDA enabled.
    I found out that the NVIDIA GeForce GT 650M 1024 MB, is CUDA Enabled
    So, I installed the CUDA 5.0.37 driver for MAC
    I opened Terminal and ran a GPUSniffer to get the name of the Graphics card
    I opened another window in terminal and ran a "sudo nano" command that listed the default supported Cards, I pasted my card name.
    NOW I can choose GPU instead of CPU for Ray-tracing, WHICH IS GOOD, Its what I was trying to do. BUT something is still wrong because I keep getting an error message at startup: "After Effects error: Ray-traced 3D: Initial shader compile failed. (5070 :: 0)" 
    I DIDNT GET THIS ERROR BEFORE I INSTALLED & ENABLED "CUDA GPU"..............What is wrong?

    Don't manually manipulate that text file. That is unsupported, and you are on your own if you do so.
    What you should have done is to install the 11.0.2 update to add the GPU acceleration of the ray-traced 3D renderer for your 650M:
    http://blogs.adobe.com/aftereffects/2012/10/after-effects-cs6-11-0-2-update-bug-fixes-and- added-gpus-for-ray-traced-3d-renderer.html

  • After Effects error: opening movie - you do not have permission to open this file (-54)

    Hi all,
    I'm new to after effects. I have just started receiving the following error every time I try to render my movie:
    "After Effects error: opening movie - you do not have permission to open this file (-54)".
    Yesterday morning, I was able to render movies, however, after I did Apple's latest update I've started receiving the following error. What is happening is that I'm trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I've tried to repair the permissions with disk utility, but that doesn't seem to have helped.
    I've searched Google and the Adobe support forums with no luck. Please help.
    Thanks in advance for you help,
    William

    Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
    http://discussions.apple.com/thread...347251&tstart=0
    Download the right version here:
    http://www.apple.com/support/downloads/
    Panther: http://www.apple.com/support/downlo...forpanther.html
    Tiger: http://www.apple.com/support/downlo...31fortiger.html
    Leopard: http://www.apple.com/support/downlo...forleopard.html
    Install with Pacifist
    http://www.charlessoft.com/
    Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store... which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

  • What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

    So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
    After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
    After Effects error: Not enough memory to initialize PSL.
    ( 83 :: 8 )
    Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
    Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
    The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
    Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
    I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

    Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
    After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
    Then, when I click OK, I get:
    After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
    ( 0 :: 42 )
    Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
    Problem signature:
      Problem Event Name:          APPCRASH
      Application Name:          AfterFX.exe
      Application Version:          11.0.0.378
      Application Timestamp:          4f6d63ab
      Fault Module Name:          StackHash_a85b
      Fault Module Version:          6.1.7601.17725
      Fault Module Timestamp:          4ec4aa8e
      Exception Code:          c0000374
      Exception Offset:          00000000000c40f2
      OS Version:          6.1.7601.2.1.0.256.1
      Locale ID:          1033
      Additional Information 1:          a85b
      Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
      Additional Information 3:          f862
      Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

  • After Effects error: crash occurred while invoking effect plug-in "Looks" URGENT!

    My name is Tyler and i'm a Mult-Media Editor in training. Just recently meaning just this project i've been getting this error "After Effects error: crash occurred while invoking effect plug-in “Looks”." every time i try to render. If i try to remove the clip where it messes up and replace it with another it will just mess up in another spot.
    Screen Shot Here:http://gyazo.com/794429fd1091973c8a296a27d2af6fab.png
    Information:
    AE: After Effects CS5 (64-bit)
    OS: Windows Home Premium (64-bit)
    RAM: 8gb
    Processor: 1st Gen. i7 Quad-Core
    Graphics Card: NVIDIA GeForce GT 320
    Updates: Installed All Updated For Adobe Products
    Source Footage: Call Of Duty: Modern Warfare 2 @ 60fps using UT Video Codec YUV 420
    Worked Before? Yes
    Open GL: My open gl is not enabled
    I've read other forums and watched tutorials. I've already done the following. (Not in order used)
    1. Downgrade Magic Bullet Looks from 1.4.3 to 1.4.2 (Didn't Work)
    2. Upgrade Magic Bullet Looks to MBL 2.0 from Magic Bullet Suite 11 (Didn't Work)
    3. Uninstall my gfx card and re-install it with the newer version (Didn't Work)
    4. Reset AE preferences by pressing alt+shift+ctrl on the shortcut (Didn't Work)
    5. Change render settings from H.264 -> .AVI (Didn't Work)
    6. I've deleted "AE_OpenGL" from my After Effects folder (Didn't Work)
    My Composition:
    http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.png
    http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.png
    The look file is not that complex but i don't know if it'll help but there it is.
    Look File Settings:
    http://gyazo.com/25346bb318edadc54e09273977964c7d.png
    I've never had this problem before and hope that someone has a solution to this problem... if so please post an answer. I don't know if its because i put the plug in on all of my clips and then made an adjustment layer with another Magic Bullet Looks or if it's my clips fault but i just dont know what to do.
    -Tyler

    It sounds like Looks is only crashing on this project. If that is so then it's most likely a problem with one of your video clips. Either there's a corrupted frame or some other codec glitch that's throwing the errors. I'd suggest replacing footage items with temporary footage. You could even use solids. Replace one at a time, then undo, until you find the footage that's causing the crash. Then either re-compress that footage to another codec or replace it.
    If Looks is crashing on every type of footage then you need to pursue other options that are more system related.

  • After Effects Error "error cannot be imported this moov file is damaged or unsupported"

    I'm working on a AE project and shut the project down before going to lunch. I come back and open it up and I get this error:
    after effects error cannot be imported this moov file is damaged or unsupported
    Nothing had changed in my project since earlier today. I've tried to import other .mov's and get the same error, I've also tried to relink the footage.
    Any thoughts?

    We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
    If you're using After Effects CC (12.0), start here for QuickTime issues:
    http://bit.ly/QT_AE_CC_12

  • After effects error: rendering error while writing to file. Disk full.

    Hi,
    I tried to render a video in AE CC 2014, with RGB + Alpha as I wanted to keep the background transparent (rotoscoped) so that I can then use it in Premiere.
    I chose to export in Quicktime, with uncompressed 8bit.
    After it rendered it for a little while I had a window pop-up saying
    After effects error: rendering error while writing to file "E:...blabla". Disk full. The file may be damaged or corrupted. (-1610153463).
    I read a thread posted in the forums but i do not understand the solution provided there.. What is a POD??
    I have a Win7 Ultimate, x64. Plenty of disk space, and 16 Go ram.
    Please help, I canoot go further in my project with this bug...
    Jaywaii

    Is the drive you are rendering to formatted FAT32 by any chance? If so you can only render up to 4Gb for one file. Try rendering out a TIFF sequence instead. Litte tip - push the LZW compression tickbox in format options for a lossless compression, this will keep you file size way down.

  • After Effect error: Rendering error while writing to file

    Greetings,
    I'm a beginner and am starting to learn most of the basics but every time I try to render a specific type of composition, I get this massage:
    After Effect error: Rendering error while writing to file "C:Users\Admin\Videos\720p.mp4".Unknown Error! (-1610153453)
    RENDER SETTINGS:
    LENGTH: 8min. and 30 sec
    FORMAT:H.264
    CODEC: mp4
    RESOLUTION: 1280 x 720
    AUDIO: 48.000 kHz, Stereo
    OUTPUT LOCATION: C DRIVE (22GB FREE)
    I got Windows Ultimate 64-bit and Adobe After Effect CS5.5 64-bit (both on C drive) installed in my laptop.
    When I first installed after effect, I rendered a part of the whole composition (AVI, 720p) and it worked but after that when I rendered with
    format H.264 it showed this massage. Then I tried to change it back to AVI. and rendered. again the same massage.
    My C drive isn't full, I have 22GB SPACE AVAILABLE.
    And when I try to save it on D (114GB free) or E drive (33GB free), It shows me the SAME MASSAGE.
    PLEASE HELP
    Thanks in advance.

    Hi HR and everyone that have the problem error (-1610153453)
    In my case I solved the problem changing the destination folder, I was rendering in a folder with a non english character! in my spanish language we have the "Ñ" ('n' with a wave on top ) after effects mp4 codec NO Ñ or cyrillic, etc...
    I finally solve it thanks the russian friends: (http://nix-studio-edition.ru/tutorials/faq/1083-ae-1610153453.html) and Google translator
    Hope it helps to desperate workers
    Thanks

  • After Effects error : layer does not have a source.

    Hi All,
              I add a Text layer and then add my custom fill  effect to it. Then I call AdvItemSuite1()->PF_ForceRerender(in_data, &(params[0]->u.ld)) from AEGP for all the layers. But only for Text layer, AE pops up a dialog displaying the following error :
    After Effects error : layer does not have a source.
    (26::335)
    Why is this happening? What other call can I use to rerender all the layers?
    Thanks & Regards,
    Dheeraj

    Am 13.04.2011 12:21, schrieb dheeraj_c:
    For now just added a dummy parameter in the effect and calling AEGP_SetStreamValue() to render all the layer with effect.
    I also have experienced problems with PF_ForceRerender(),
    AEGP_SetStreamValu() seems like an alternative solution...

  • After Effects error: Could not launch Adobe Analysis Server (515)   ( 25 :: 101)  *POSSIBLE FIX*

    Hi. Im New to the forums so sorry in advance if i do something incorrect
    Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
    After Effects error: Could not launch Adobe Analysis Server (515)
    ( 25 :: 101)
    Or if i would use dynamiclink
    The Importer created a generic error
    Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
    *Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
    This guide is for Windows OS Only.
    If the error still presists, try these options
    -If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
    -Disable your Anti-Virus and your Firewall
    I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
    1) Go to your start menu search "Check Firewall Status"
    2)Then to the left of the window, click Turn Windows Firewall on or off
    3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
    -Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
    -Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
    -If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
    If none of those options work,  I would suggest a full format and reinstall of windows.
    I hope this would help people with this issue.

    captain_astronaut wrote:
    I'm running the latest version. Just installed yesterday.
    You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
    captain_astronaut wrote:
    I'm on a Mac so I don't have anti-malware, or other security software running.
    That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
    I certainly hope you at least have your firewall running.
    captain_astronaut wrote:
    I tried launching Premiere yesterday and it crashed.
    This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
    Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

  • Please Help After Effects Error:Crash in progrss.Last logged message was: 8020 GPU manager Sniffer Result Code:3

    Tell us about your computer hardware.
    A:Here is my specs:
    i-7 4770 motherboard
    8 gb of Ram
    What operating system?
    A:Windows 7 64 bit OS
    If you are getting error message(s), what is the full text of the error message(s)?
    A:After Effects Error:Crash in progrss.Last logged message was:<8020><GPU manager>Sniffer Result Code:3
    What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
    A: Opened it and the error started

    @Todd_Kopriva
    thank you very much it works now

  • After effects error: unknown exception on frame 0 in 3D Camera Tracker. (1) (25 :: 16)

    I am getting this error code ( http://prntscr.com/2qbcro ) when i open a project i've been working on recently. When i press ok, everything that was in the project dissapears. I've tryed to open other projects with 3D camera tracker, and they works fine. I've also been trying to re-install after effects, but with no luck...
    I haven't been installing any new third party plugins lately.
    I tryed to import the actual AE file. It gives me the same error, but it is not starting up a new project, all the files that i've been using in the project is there in the project panel. But none of my compositions is open. When im trying to open them by double clicking on it, it comes up with a new error saying "After effects error: layer does not have a source (26 :: 335)" ( http://prntscr.com/2qdscz ) (Only some of the compositions is giving me this message, all the compositions where i've been using 3D camera tracker in it, is giving me the message) I'm trying to delete all the compositions that is giving me this error message, but when i've deleted some of them, and i'm trying to save the new project, my after effects crashes, and some new weird error messages is popping up, like: http://prntscr.com/2qdtsu & http://prntscr.com/2qdu67. After these messages it automaticly quits out of after effects.
    If you could help me out, i would be soo damn happy!

    i tryed to explain it in my other text:
    I tryed to import the actual AE file. It gives me the same error, but it is not starting up a new project, all the files that i've been using in the project is there in the project panel. But none of my compositions is open. When im trying to open them by double clicking on it, it comes up with a new error saying "After effects error: layer does not have a source (26 :: 335)" ( http://prntscr.com/2qdscz ) (Only some of the compositions is giving me this message, all the compositions where i've been using 3D camera tracker in it, is giving me the message) I'm trying to delete all the compositions that is giving me this error message, but when i've deleted some of them, and i'm trying to save the new project, my after effects crashes, and some new weird error messages is popping up, like: http://prntscr.com/2qdtsu & http://prntscr.com/2qdu67. After these messages it automaticly quits out of after effects.

  • After Effects error: There was an error processing the PDF document.

    I have been struggling with this problem ever since CS4 was installed.
    I have the CS4 Mac Master Collection.
    I am using Illustrator to create text for animation in After Effects.
    I can create text in Illustrator and import it into After Effects fine. But when I go to make a change to
    the Illustrator file, even as simple as changing a color, I get this error.
    After Effects error: There was an error processing the PDF document. The file may be damaged or corrupt. (50::29)
    The Illustrator file is then toast as far as After Effects is concerned. It cannot be opened or reimported.
    I have to start over again and over again, rebuilding the Illustrator file each time.
    HELP!!!

    This is an issue with AI and ultimately therefore also the AI routines that AE shares to access such files. Has been there forever and neither the AI people nor the AE team seem to be able to fix it in a consistent manner. Simply save a copy of the file from AI, then use Replace Footage instead of reload or at least always fully reload the AE project.
    Mylenium

Maybe you are looking for