After Effects repeated render fails, even rendering to Tiffs

Hi I'm trying to render this out: http://videohive.net/item/website-promotional-video-and-commercial-version-2/3229923
with obvious cam and image changes.
There are no plugins used, just some 3D layer 1440 x 911 pngs, cropped using masks, a few lights with shadows on.
My PC has 12gb ram.
The errors are: Crash occurred while evoking render plug-in "Classic 3D"
and <BEEp_InitSoundPB><0>Vid rate ratio min, max 1,1.
I have no audio in the comp and I'm rendering in parts now between fails, to 1920 x 1080 tiffs as a last resort.
Any ideas apart from "Get a Mac" would be most welcome

http://myleniumerrors.com/2013/05/03/blitpipe-6/
Mylenium

Similar Messages

After Effects CS6 render fails!! Help!!!

Hi,
I have an issue with my Adobe After Effects CS6. When I try to render a compostion that contains video and audio, the render fails. I need your help very urgently.

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

After Effects CS6 - RENDER FAIL.

Right so basically I'm trying to render a simple video including the following effects: Twixtor, RSMB & Magic Bullet Looks. When I try to render the video using the H264 option in 30 frames per second, in 1280 x 720, I receive the following errors and I'm really clueless on how to solve this. I'd really appreciate it if someone could help me out, also My computer specifications are:
4 GB Ram
R7 260X 2GB GPU
AMD FX 6300
Windows 8.1 Pro
500GB Hardrive

Oh alright, erm the composition settings are: 1280 x 720, 30 FPS, Lock Aspect ratio to 16:9 (1.78), Pixel Aspect Ratio: Squares Pixels, Frame rate is 60, Resolution is Full 3.5MB per 8BPC frame.
The output is: Quality is Best, Resolution is Full, size is 1280 x 720, frame rate is 30 FPS, and format in the output module is H.264 with a bitrate of 6.00 mbps.
Also I've just tried removing my adjustment layer which consists of the reelsmart motion blur and magic bullet it looks, it seems to be rendering just fine. So could it possibly be one of those effect? I'm really not sure because I always use those and it always has rendered just fine! Thanks so much for replying though man. I hope you can find a fix.

After Effects - Multiprocessing not allowed even when a Proxy is used?

Hi everybody!
          I have a composition (Comp1) that uses an effect which doesn't allow multiprocessing (e.g., Lens Blur) -- this I understand.
          Comp1 is used inside of Comp2. When I pre-render Comp1 and use that render as a proxy for Comp1 inside of Comp2, I still can't use multiprocessing. This is the confusing bit. I'd think since the Lens Blur effect isn't actually being rendered, it shouldn't give me any guff.
          Alas, it does. Anyone else run into this? Is there a workaround, or is it a bug/oversight by our friends at Adobe?
          Thanks in advance as always -- this forum is a great resource!

Hi Dave,
I appreciate your help, but I think I'm still missing something. When I set a proxy movie for my Comp1, come render time, it should never look inside Comp1 at all — it should just use the proxy movie. The LensBlur effect is not applied to Comp1 itself, it's used INSIDE Comp1.
To what end would AE look inside the real Comp1 when it's been assigned a proxy movie?
--Rob
Rob LaRose systems administrator
imaginary forces | 530 west 25th st | new york city | p 646.486.6868 | f 646.486.4700 | www.imaginaryforces.com
From: Dave LaRonde <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 4 May 2011 16:20:44 -0400
To: Rob LaRose <[email protected]<mailto:[email protected]>>
Subject: After Effects - Multiprocessing not allowed even when a Proxy is used?
Typically, a proxy is a low-resolution substitute for the real image to make AE work a little faster, right? When AE renders, it doesn't render the proxy, it uses the high-resolution real image, right? The same thing is happening in your project.
If it doesn't impact your work to use a lower-resolution substitute for your comp 1, I'd suggest not using the substitute as a proxy.
If full resolution matters, make a full-resolution prerender.

Set up After Effects CS 6 for network rendering with only a single license.

I have searched on and off a couple of days to find specific setup instructions for submitting projects to network rendering but all I can find refers to somehow installing AE on several machines in a non-license mode and, essentially, submitting a "batch" type job that get distributed, sync'd and collected. OK, I get this. But I find nothing on the details of installing on several machines.
So assuming I understand things to this point, the question is really how do you install multiple AE6 copies to systems with only a single license? I have a single license key with a CS 6 Premium Suite and would expect that I wouldn't be able to get past Activation after installing or am afraid of trying lest Adobe think I'm attempting to circumvent licensing.
Thanks in advance for any help.

> am afraid of trying lest Adobe think I'm attempting to circumvent licensing
Have no fear. Just do it. There's no risk to trying to install software on as many machines as you like. Even in the cases in which you only have a license to use our software on two machines, the worst thing that happens is that you are told to deactivate on one computer before activating on another.
See these posts:
installing After Effects CC render engines with Adobe Creative Cloud
codecs and the render engine in After Effects CS6 and After Effects CC

After Effects CC Render Error H.264

Win 7x64
Adobe After Effects CC 2014 13.0.2
QuickTime Pro 7.7.6 installed
I'm IT. Not a day to day user of CC Products.
I have a client (Uni) that is having trouble rendering in After Effects H.264 with complex renders. Basic 'simple, single image' renders work without issue. And the error output is set to 'errors only' yet nothing spits out. Users are Standard Users.
Where is a jumping off point to decipher what is breaking?

That's nice.
But from your initial query, it's difficult to know whether this person is importing h.264 footage or trying to render h.264 footage. H.264 footage used in AE can cause problems with certain effects, and it is NEVER a good idea to render to h.264.
So this could be an operator error rather than a system error.
So I tell you what, Mr. IT Guy -- go buttonhole this person, put your heads together, and answer the litany of diagnostic questions you'll find here:
FAQ: What information should I provide when asking a question on this forum?
Between the two of you, you'll have a much better chance of coming to the root of the problem... but separately? That's a crap shoot.

After Effects CC 2014 fails to load Quicktime Components.

After Effects CC 2014 fails to load Quicktime Components and unable to export or render .mov, .mp4 or any type of quicktime videos.
The application will launch and I can create and edit projects and comps but I am unable to render any type of movie files. I can render images sequences.
I have the latest version of Quicktime (10.3) and Quicktime Pro 7. Please let me know what I need to do to get AE CC 2014 to render movies.
Thank you.

Kevin,
I’ve reinstalled Adobe AfterEffects CC (version 12.2.1.5) and am still having the same issue with the failure to recognize Quicktime.
Can you assist?
John Luu
Art Director / Digital Marketer
1702 Washington Avenue
Houston, Texas 77007
Tel: 713-523-5711 ext. 208
Fax: 713-523-6083
[email protected]
www.axiom.us.com

After Effects CS6 Update fails with the code (U43M1D204)

I was just downloading and installing the latest updates on both my windows workstation and my Apple MBP. Everything went fine on the windows machine but I keep getting the following error when my MBP attempts to update After Effects CS6:
Update Failed
The download appears corrupted. Please try again after a few minutes.
(U43M1D204)
I am running the latest version of Yosemite (10.10.2). Is there some half downloaded file I can delete to make this work? I've waited. I've rebooted. I'm VERY reluctant to delete my current installation of CS6 if this is what is required. I'm an instructor at a local community college. The college currently only runs CS6. I teach an animation class that uses After Effects and as such I need CS6 working on my MBP. If this update is non critical I'll just let it ride. Oh, yea and I also keep AE CC and AE CC 2014 for no other reason than I can take a students CC 2014 file all the way back to CS6 so they can work in class. I'm guessing I'll need to add CC 2015 or what ever they call it so I will have 4 installations of AE just to do file conversions..... but that is another thread.
Any help on the current install issue would be appreciated

rimcrazyph wrote:
If this update is non critical I'll just let it ride.
What update is it? What current version of CS6 do you have?
It may be a permissions thing. Mac OSX goes all screwy in the permissions whenever it updates. Try fixing that first. fixing permissions problem that impedes start of Adobe applications

After Effects CS6 Installer fails to initialize continuoesly

After Effects CS6 Installer fails to initialize numerouse times. Have tried alll that is suggested. Help Please

We cannot know. You are not providing any system information and other details.
Mylenium

After Effects Cs6 Render continuously fails at the same Frame?!

So I was editing a Call Of Duty episode that I've been working on for a week... Once I got it finished I rendered it out and about half way through the render fails every single time! I've read others like these and I know I have enough RAM, but the wierd thing about it is that every single time I don't get an error message... Just "Render Failed." Every single time at about 47 seconds. Please help I have a guy waiting on it and it was my best so far anyways, if any of you know the solution to this I'd be very happy.

You have provided us with no information to figure out your problem. What version of CS6 are you running? 11.0.0? 11.0.1? 11.0.2? What OS? What are your system specs? What's in your comp? What effects have you used? Have you installed any third-party plugins? Have you installed any third-party codecs?
And, most importantly, WHAT IS IN YOUR COMP AT 47-SECONDS IN?

After Effects CS6 render problem with exactly one frame or exactly at one point in the timeline.

I've recently tried to render a project in After Effects CS6 but everytime I render the render fails at exaclty one frame or a time in the timeline, in this frame or point in timeline I have a composition with the following effects: Twixtor Pro and inside that composition I have the video with the following effects: Motion Tiles and Wave Warp. I rendered the project in H.264 format with a 8 bitrate. I tried to fix this even by trying to render the project as a TIFF Sequenece but the render keeps failing and the final output is only the part of the video until that exact frame. I have caps lock on to try to speed up my render. Any help would be appreaciated and let me know if you need more information and i'll try to give you more.

Set your work area to about 5 frames before the fail and 5 frames after and see if you get a fail.
If you get a fail then start turning off a layer at a time until you find the culprit. Let us know what's going on there.
A screenshot of the timeline with all properties revealed may also give us some ideas.

After Effects wont render full res - possible RAM issue?

Not sure if this has ever come up before - I'm unable to render out of after effects and RAM preview half res. When I try and RAM preview the comp just goes black and when I send it to render I get the following message:
After Effects warning: Logged one error - "error Rendering while writing to file. An output module failed. The file may be damaged or corrupted(-1610153464)"
I'm able to RAM preview half res okay, and can render out half res as well. I've tried it with rendering multiple frames simultaneously on and off, clearing the disk cache and turning off any RAM hogging effects.
An obvious cause I've identified is that I've recently upgraded and replaced the RAM on my machine, however, after effects has been the only software effected. Cinema 4D renders no problems and I've had no other problems with the general running of my machine.
Have there ever been any cases before of After Effects not working with certain types of RAM?
My set up -
Mac Pro - Early 2008
OSX Mavericks 20.9.2
2 x 2.8 Ghz Quad-Core Intel Xeon
16GB 800MHz DDR2 FB-DIMM
250GB Samsung SSD

I'm running After Effects CC 12.2.1.5
Sorry should have mentioned, no matter what format I render as, whether it be QT or TIFF sequence, I still get the exact same error.
QT version i'm using is 7.6.6
In terms of reproducing the error, it seems to happen to pretty much anything I try and render, unless it's an extremely simple one layer comp. Rendering a comp with 2 image sequence layers (1920 x 1080) will cause this to happen, but if there's just the one image sequence alone in the comp (and no other layers) then it will render.

After Effects CS6 render error - grey artifacts

Hi there,
I was wondering if someone could help me? I am rendering out a video in After Effects using H.264 codec, High 5.0 Profile at CBR 5 and 25fps. However, on all occassions and with all videos, not just this one, when the video renders, many frames appear grey (see below);
I have tried rendering it out at various levels of quality, both CBR and VBR, and even using Adobe Encoder also, and the problem still persists. It is not always in the same place also and appears randomly. I was wondering if anyone else had come across this problem and had a solution?
I have re-sintalled the Adboe Suite on several occasion to try and counteract this, but again, the problem presists.
Any help would be greatly appreciated!
Thanks,
Ollie

It appears you are viewing your footage in Quicktime X, which in itself is not particulalrly sensible. Use the "classic" Quicktime 7 If it's okay there, then the file will work. Other than that this could be something with your source footage, your media cache, whatever. We cannot know. You are not nearly providing half enough info, so we end up guessing around. Also simply render to another CoDec and do the actual conversion in Adobe Media Encoder.
Mylenium

After Effects 3d Render

I am trying to render my 3d text in after effects cs6 but when I click render, suddenly after effects starts using up 90% of my cpu which causes my computer to crash with an incomplete render. I have set my ray traced renderer quality to as low as 3 but that has not affected this at all. Any ideas???

a) You are not using the latest 11.0.4 update
b) ATI cards generally don't support CUDA and thus not the 3D renderer
c) You are running on Win 8.1, which introduced a number of compatibility issues with all Adobe apps.
So at best your stuff will run on the CPU, but judging from your error message, there is a driver issue here. Could be something with the power management of your i7. Could of course be a million other things, but without seeing the detailed crash info nobodfy can be more specifc. Apply the AE update, check your device manager for flakey or missing drivers, dabble with the compatibility settings and perhaps security stuff in Windows and even check your CPU configuration in the BIOS/ EFI...
Mylenium

After Effects Minimized Render Crash?

I am experiencing a very annoying issue pertaining to After Effects CS 5.5. I recently purchased the product (Production Premium CS5) and installed it on PC only to encounter a strange error. Whenever I do a preview render (pressing 0) and then minimize I then see the number of frames being rendered in the minimized window (this is normal). However, upon clicking the minimized window to reopen it After Effects crashes immediately with the error: After Effects error: "Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available". After effects gives me the option to save my work and notifies me to contact the Adobe Technical Support Center. I recently purchased this product I am disappointed that I cannot minimize the program while rendering, the program did not do this immediately, it started doing this a couple of days after I started using it.
I have already tried uninstalling after effects and reinstalling and i get the same error everytime.
My PC Specs:
8GB RAM
AMD 1100T Sixcore 3.3 Ghz processor
GTX 275 graphics card performance edition
Is there something I'm missing? Please Help me resolve this issue, After Effects is a good product.

It usually crashes with this log message:
"Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available"
I never changed anything with my system when this error occurred nor did I install a new driver, I didn't even install a new program or do any system changes.
I have OpenGL disabled but I get this crash with it on or off. I have even tried rendering a project where all I had was a square with keyframed position but I still get the same rendering crash/error when I minimize the window, therefore I don't think its an effect causing it or OpenGL.
Any Ideas?

After Effects repeated render fails, even rendering to Tiffs

Similar Messages

Maybe you are looking for