After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Hi,
We have an issue with our OWA page. We are currently publishing OWA via UAG.
We recently upgraded to Exchange 2010 SP3 and then SP3 Rollup7. Since the upgrade, we are keep getting the following error after entering our credentials on the login page. I've tried with every possible browser.
You do not have permissions to view this folder or page
Strangely enough, the mobile phones are sending and receiving emails just fine, the phones use the same OWA link, so it's not an authentication issue, the phones login into the UAG servers with no issues. I can see this on the Active Sessions screen
on Web Monitor.
I've attempted to connect to the OWA by bypassing the UAG server, so putting in the local OWA address of one of my Exchange servers, it works... so the OWA page is up and running.
No error logs get generated on Web Monitor when we receive the permission error, I think this is because it's past authentication, it's on the Exchange layer.
Any insight would be helpful? I'm assuming something changed on the Exchange side after the upgrade.
Just in case, I've upgraded the UAG and TMG servers to the latest SP and Rollup packets.
UAG > SP4
TMG > SP2 Rollup 5

I've found a solution; UAG requires Basic Authentication over OWA. For some reason Integrated Windows Authentication got turned on after the SP3 upgrade.
http://technet.microsoft.com/en-us/library/ee921443.aspx
Turning Integrated Windows Authentication off via the Client Access OWA settings resolved the issue. Though beware, you
have do this on all your Client Access servers.

Similar Messages

After QT7.4, AE error-you do not have permissions to open this file (-54)

Immediately after installing the QT 7.4 update, I have been unable to render (anything) in After Effects.
I get an error: After Effects error: opening movie - you do not have permissions to open this file (-54)
(44::53)
I have repaired permissions, downloaded the Full QT 7.4 installer, reinstalled, repaired permissions again and still the same problem. Something has changed in QT that has made AE incompatible.
Apple, please fix or offer some assistance on how to fix.
The AE forums are also beginning to fill with everyone having this same issue after an update to QT 7.4
My work has come to a halt. How do I fix this?
I can't find any info on reverting back to QT 10.3.1

"Apple, please fix or offer some assistance on how to fix."
Apple does not read these postings. These are user to user forums whereas everyday folks post questions & offer help to each other.
"How do I fix this?"
Check out Klaus1 possible solution in the following thread:
http://discussions.apple.com/thread.jspa?threadID=1343184&tstart=0
"I can't find any info on reverting back to QT 10.3.1"
You really mean 7.3.1 right?
Do an archive and install of your OS from the OS disc. Stop at the QT upgrade you need.
http://docs.info.apple.com/article.html?artnum=301270 Scroll down to "Archive and Install”

HT1349 i installed itunes after finish it wont start saying "the folder itunes is on a locked disk or you do not have write pemissions for this folder" im on my admin for my Pc how do i fix??

im am having a problem with itunes itself, it was not importing cds properly so i uninstalded then reinstaled now after the install when i try to start it says:"the folder i tunes is on a locked disk or you do not have write pemissions for this folder" now im on the Admin for my PC so i should have full access, so im stuck with what to do, any ideas? thanks

Post this in the iTunes forum as it does not pertain to an iPod Shuffle.
https://discussions.apple.com/community/itunes
B-rock

Online Archives in Outlook 2010 disappeared after Exchange 2010 SP3 upgrade

I have Exchange 2010 and noticed it has never been updated since having it in production for 3 years now. So I downloaded SP3 and installed it after hours. After the install was complete, rollups 5,6,7, showed up in Windows Update so I installed those too.
Before I did the upgrade to SP3, I had Online Archives visible on just my user account mailbox and have about 2 years worth of emails in there. Since the upgrade, it is no longer visible in my Outlook 2010. I have tried to fix to remove SELF and re add it
to the mailbox with no change to the issue. I have tried to disable Archive for my mailbox and re-add. Nothing. Don't really know what else to try. Any ideas?

Anyone?

Scheduling Assistant shows "You do not have permissions to see the recipient's free busy" Exchange 2010

Setup:
Exchange Server 2010 Sp2
Servers running individual roles (2xMailbox, 2xCAS, 2xHub, 2xEdge) All windows server ent 2008 R2
I can see the calendar content if i open Room Mailbox using the 'Open Calendar' from the menu but the scheduling assistant while
creating a new meeting invite gives 'You do not have permissions to see the recipient's free busy' error code 5037
Permission on the conference room is below.
[PS] C:\Windows\system32>Get-MailboxFolderPermission -id Testconfroom1:\calendar
RunspaceId : bbb43bc9-a0c5-4c23-b5f5-b7235f795e26
FolderName : Calendar
User : Default
AccessRights : {ReadItems, EditOwnedItems, FolderVisible}
Identity : Default
IsValid : True
RunspaceId : bbb43bc9-a0c5-4c23-b5f5-b7235f795e26
FolderName : Calendar
User : Anonymous
AccessRights : {FolderVisible}
Identity : Anonymous
IsValid : True
Appreciate any help to fix the above.
Inderjit

Hi Inderjit,
Does this issue occur on only one user or all users?
If only one user has this issue, I suggest performing troubleshooting on Outlook client first.
1. Please run Outlook under safe mode to avoid some AVs and add-ins.
2. Please start Outlook with "outlook.exe /cleanfreebusy".
3. Please try to re-create profile to refresh the caches.
Then please perform troubleshooting on Exchange server side.
1. This issue may occured due to mailbox corruption in the folder level.
2. Genrally we can check the mailbox property PR_FreeBUsy_NT_SECURITY_DESCRIPTOR and verify the permission.
3. I suggest re-granding the specific user permission for testing.
4. I suggest moving the sepcific user's mailbox to another database, issues will solved by itself automatically.
If all users have this issue, I suggest resetting the permission on Calendar folder and give the necessary permissions (Free Busy Time/ Free Busy Details /Full Details) via Exfolders.
Refer to :
http://gallery.technet.microsoft.com/Exchange-2010-SP1-ExFolders-e6bfd405
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

"you do not have permission to do this operation + SP Designer 2010 Error

I am unable to access to my sharepoint site via SharePoint designer. The error is: You do not have permission to do this operation. Ask your web site administrator to change your permissions and then try again, or log on with a user account that has this
permission...
I am the site owner with full control. I get the error when I click Site Actions - Edit in SharePoint Designer. I also get the error when I open SharePoint Designer directly and click on the link that was created under Recent Sites.
In my Central Admin, the SharePoint Designer Settings is all enabled. i am to beloning to farm administrator and i am teh site collection admin. and in the machine admin group.
First I created a claims based authen. with custom mem.ship /role providers and it was working fine. and i added users into the users policy user1,user2, user3 etc. and later i removed these mem.ship /role providers and removed the
"Enable fba authentication " check box.
now i am unable to login into the sp designer 2010 and unable to edit master page.
Also whenever i am trying tio change anything in the _layouts/settings.aspx, like uploading an image or adding a page etc i a egtting teh "error :access denied sign in as different user."
i am not able to find out what caused this issue till now. Did mycustom membership/role provider is causign the pblm?
or Is there any place else that I should check?
PrasadWT

Seems like an extreme thing to do but these steps worked for me:
Obviously backing up the site collection first using Central Admin's backup site collection feature
Took notes of how the current web application was configured in central admin's Web Application Management |General Setting drp down for things like general & workflow settings, external email, etc
(optional step) I took a copy of some bespoke settings I had in the web.config file of the web application
Deleted the web application from Central Admin (when deleting the web app I only deleted the IIS web site not the content db in a "just in case" operation but I don't think it matters, just remember to tidy up SQL and include any new content db in your
SQL maintainance plan)
Checked IIS that they had been removed
Re-created the Web Application (and created a new content db in my case)
Restored the site collection backup usign Restore-SPSite command with a -Force parameter
Put all the web application settings back in
Shut down IIS for a moment to add my custom web.config settings back into the new file
Rebooted the server
As I say a bit extreme but it worked...

After Effects error: opening movie - you do not have permission to open this file (-54)

Hi all,
I'm new to after effects. I have just started receiving the following error every time I try to render my movie:
"After Effects error: opening movie - you do not have permission to open this file (-54)".
Yesterday morning, I was able to render movies, however, after I did Apple's latest update I've started receiving the following error. What is happening is that I'm trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I've tried to repair the permissions with disk utility, but that doesn't seem to have helped.
I've searched Google and the Adobe support forums with no luck. Please help.
Thanks in advance for you help,
William

Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
http://discussions.apple.com/thread...347251&tstart=0
Download the right version here:
http://www.apple.com/support/downloads/
Panther: http://www.apple.com/support/downlo...forpanther.html
Tiger: http://www.apple.com/support/downlo...31fortiger.html
Leopard: http://www.apple.com/support/downlo...forleopard.html
Install with Pacifist
http://www.charlessoft.com/
Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store... which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

Exchange 2010 SP3 Update 7 breaks OWA for some IE11 users

I had issues earlier with OWA on some clients running Internet Explorer 11 (as
documented in this thread), and managed to resolve it by disabling compatiblity mode in IE11.
After SP3 Update Rollup 7 the issue came back, and no tinkering with the compatibility mode will solve it.
Have anyone encountered this issue before? The issue only appears on certain machines in their own AD OU as well as own subnets.

Hi,
I haven't heard that Exchange 2010 SP3 Update Rollup 7 has this issue so far. In your case, I would like to verify if you remove all interim updates for Exchange 2010 SP3 before installing Rollup 7. If no, remove it and check the result.
Here is a kb for your reference.
Update Rollup 7 for Exchange Server 2010 Service Pack 3
http://support.microsoft.com/kb/2961522
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Outlook 2013 Category view not updating after Exchange 2010 SP3 RU3

After updating to Exchange 2010 SP3 RU3 last night, users who use categories view in Outlook 2013 are complaining that the view does not update. The alert is received in the notification area and the unread message count next to Inbox updates appropriately.
The view can be force updated by switching between All and Unread, by using Reset View, or closing and opening Outlook. It seems anything that forces a 'redraw' of the view will update it - except for the actual reception of email. I easily replicated
this issue. For reference:
Exchange 2010 SP3 RU3
Windows 7 x64 Ent
Outlook 2013 (15.0.4551.1004) 32-bit
I do see that SP3 RU4 has been released, however the only change listed is a security patch.
Thank you for any ideas.

Hi, Everyone –
This has been a known issue for a very long time – we have people at our workplace that are very disappointed since a feature as great as categorizing email (not using tasks) has become broken and has not even been considered to be fixed for
over half a year. It was not fixed in the updates for Patch Tuesday this week.
I would like to confirm that this is an issue with Outlook 2010 and 2013 when running the latest Exchange 2010 and there is NO FIX
– I have scoured the internet for a solution – all proposed "textbook" solutions do not work and I am positive that the issue can be recreated; however, everyone from Microsoft does not mention trying to recreate the issue at all.
The workaround of creating a rule to send new emails to a category could break other pre-existing rules and cause more frustration and wasted time for users/IT before and after the issue is fixed.
Please fix this issue sooner than later, as the Categories view is completely broken and unusable at this point in time.
Regards,
IT Helper

Exchange 2010 SP3 upgrade - Event ID 4999 - Address Book Crash

0
I just upgraded an Exchange 2010 SP1 CAS server to SP3 - since then anytime an outlook client connects to the CAS server, the Address Book service crash's and event 4999 is logged in App log. I can reproduce the issue by attempting to create a new
outlook profile and checking the name against the CAS server. This crash's the service and the client recieves an error message. The contents of event ID 4999 is below. I've tried re-installing the CAS role, re-applying the schema extension
for SP3. I've installed all windows updates, enabled logging but I'm not getting anywhere. If anyone can help with this issue, I would greatly appreicate it.
Watson report about to be sent for process id: 10168, with parameters: E12, c-RTL-AMD64, 14.03.0123.004, M.E.AddressBook.Service, M.Exchange.Rpc, M.E.R.R.RfriRpcOperationBase.Complete, System.ArgumentException, a3e, 14.03.0123.002.
ErrorReportingEnabled: True
That error is followed by a message that the Address Book service has sucessfully started

Hello,
For exchange 2010 sp3, there is no article to explain the issue.
I suggest you run EXBPA aganist your exchange server health check.
Cara Chen
TechNet Community Support

Exchange 2010 SP3 upgrade

Dear Exchange admin,
We tried to upgrade Exchange 2010 SP1 to Exchange 2010 SP3 .In HQ site all preparation finished smoothly.
But in DR we are unable to do even preparation.We are getting the following error.
Please advice me how can proceed.
Summary: 4 item(s). 2 succeeded, 2 failed.
Elapsed time: 00:00:37
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Failed
Error:
Setup needs to contact the Active Directory schema master but this computer is not in the same Active Directory site as the schema master (Default-First-Site-Name).
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=2376fec1-b9ce-44db-beb6-cb9ac4788988
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Elapsed Time: 00:00:14
Languages Prerequisites
Completed
Elapsed Time: 00:00:04
Mailbox Role Prerequisites
Failed
Error:
Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run
setup with the /prepareAD parameter on a computer in the domain kfupm and site Default-First-Site-Name, and wait for replication to complete.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' () process (ID: 4508) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'powershell' () process (ID: 3808) has open files. Close the process and restart Setup.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Setup cannot continue with the upgrade because the 'mmc' (4508) process (ID: ) has 'Microsoft.Exchange.Management.SnapIn.Esm.dll' loaded. Close the process and restart setup.
Click here for help... http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=f0d3f291-5a52-43ea-9121-24aa7cd0c30e
Warning:
Install hotfix Microsoft Knowledge Base article 2550886 from http://support.microsoft.com/kb/2550886 to improve Windows Failover Cluster transient communication instability when deploying stretched Database Availability Groups across datacenters.
Elapsed Time: 00:00:18
Ashraf

Hi Ashraf
Thank you for your question.
Exchange update cannot continue because the computer that is running update is not in the same Active Directory site or domain as the server that is assigned the domain schema master role, also known as flexible single master operations or FSMO.
You can refer to the following link to change exchange site schema:
http://technet.microsoft.com/en-US/us-cn/zh-hans-cn/library/2376fec1-b9ce-44db-beb6-cb9ac4788988.aspx
You also notice the order for updated:
1.Client Access servers (beginning with the internet-facing site)
2.Hub Transport and Edge Transport servers
3.Mailbox servers
4.Unified Messaging servers
You can refer to the following link to update:
http://exchangeserverpro.com/installing-exchange-server-2010-service-pack-3/
If there are any questions, please let me know.
Best Regard,
Jim

Error: You do not have permissions to download GAL in exchange 2010

Hi,
I am trying to update GAL in outlook 2010 but I am getting any error : you do not have sufficient permissions to perform this task.
This is happening just on one particular machine although I am administrative rights on that machine.
Can anyone suggest and help resolve the issue.

Hi,
Do you mean you cannot download the OAB in Outlook client? Are you the owner of that machine and Outlook account? How do you update it in that machine?
Generally, we can use one of the following methods to download OAB in Outlook cached mode manually:
On the Tools menu, point to Send/Receive, and then click
Download Address Book.
Exit Outlook and then restart it. After Outlook starts, the offline address book download will start one to five minutes later.
Please restart Outlook in safe mode by using Outlook /Safe switch to have a try.
Thanks,
Winnie Liang
TechNet Community Support

Upgrade from 6.1.2 to 6.1.3 "you do not have permission to access this resource"

trying to upgrade from 6.1.2 to 6.1.3 on my iPhone 5 but gives me the msgs "you do not have permission to access ths resource"? I don't have any programs running in background and even trying to restore to factory, still won't allow me!!!

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
This is always a good firstvstep to try. After your iPhone restarts try to update again over the air.

After Exchange 2010 SP3 and rollup 4 update conditional formatting causes messages not to appear in Outlook 2010

Hi,
after updating to exchange 2010 sp 3 from sp 2 and also updating to rollup 4, users who use conditional formatting cannot see new message unless they close and reopen Outlook.
If you decide to change the font colour for unread messages, the messages do not appear in Outlook but a pop up indicates that a new message has arrived.
If you reopen Outlook, the unread messasge appears.
remove the conditional formatting and no issue with viewing unread messages as they arrive.
running Outook version 14.0.7106.5003
is this a known issue? a user who never used conditional formatting will experience this right away.
Thanks,
rudif

Hi rudif,
If the issue only happens to users who use conditional formatting and OWA can work well for all mailbox, I think the issue should be in client side.
Please try to reset View then set the conditional formatting back to have a try. If the issue continues, please try to recreate the Outlook profile to check whether the issue persists. Also try restarting Outlook in Safe mode by running
Outlook /safe switch.
Thanks,
Winnie Liang
TechNet Community Support

Exchange 2010 SP3 upgrade on Windows Server Standard SP2

I'm midway through the swing upgrade process of migrating from Exchange 2003 - Exchange 2010 to Exchange 2013. Everything has gone smoothly between the Exchange 2003 and Exchange 2010 migration which I started two days ago. it has been running
great. I am beginning the final stages of moving from the Exchange 2010 server to a new Exchange 2013 server, but it requires my Exchange 2010 server to be upgraded to SP3. I am now trying to install Exchange Server 2013 SP3 Upgrade and I'm
getting (3) Client Access Role Prerequisites errors. Finding any of these HotFixes and patches is frustrating, because any link provided does not work. It has gotten me nowhere. Here is my Readiness Checks:
Summary: 6 item(s). 5 succeeded, 1 failed.
Elapsed time: 00:01:06
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:08
Languages Prerequisites
Completed
Elapsed Time: 00:00:02
Hub Transport Role Prerequisites
Completed
Elapsed Time: 00:00:15
Client Access Role Prerequisites
Failed
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
Elapsed Time: 00:00:15
Mailbox Role Prerequisites
Completed
Warning:
Multi-mailbox search of on-premises and Office 365 mailboxes in a hybrid configuration requires installation of the update mentioned in Microsoft Knowledge Base article 982867 (http:// code.msdn.microsoft.com/KB982867).
Elapsed Time: 00:00:24
I put a space between the http://" space "URL so I could display the links.
Any help/guidance suggestions would be greatly appreciated.
Chris

I just got these two to go away:
Error:
Install hotfix Microsoft Knowledge Base article 982867 from http:// code.msdn.microsoft.com/KB982867.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
Error:
This computer requires the update described in Microsoft Knowledge Base article KB977592 (http:// go.microsoft.com/fwlink/?LinkId=194843). Without this update, the Outlook Anywhere feature may work unreliably.
Click here for help... http:// go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=249bbd89-16b4-4efa-9b66-7ec87f90e44c
still have this one outstanding:
Error:
Install hotfix Microsoft Knowledge Base article 979917 from http:// code.msdn.microsoft.com/KB979917.
Click here for help... http:// technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.123.3&e=ms.exch.err.Ex28883C&l=0&cl=cp
I have tried the FIX: WCF services that are hosted by NLB computers to route messages to Exchange Server fail when WebHeader settings are added by using a .NET Framework 3.5 SP1 application
Windows6.0-KB2637518-x64.msu
when I run it, it tells me "The Update does not apply to your system. So im thinking I need to remove the .NET Framework 4 Client Profile and the .NET Framework 4 Extended. reboot, then install
Windows6.0-KB2637518-x64.msu and then reinstall .NET Framework 4 Client Profile and the .NET Framework 4 Extended
this has taken a day or so to figure out the order of dependencies and the order to put them on.
Frustrating, since I won't be using Exchange 2010, were moving all the way to Exchange 2013 on a brand new server.
Chris

After Exchange 2010 SP3 upgrade, UAG publised OWA is throwing a "You do not have permissions to view this folder or page" error

Similar Messages

Maybe you are looking for