After I edited the SQL in a dataset, I can't use the query builder in any datasets that I create.
Is there a way to reset BI Publisher Enterprise 11 so that I can use the query builder again instead of having to write out all of the SQL? I know that I can't use the query builder for the dataset that I edited the sql in but I would like to use the query builder for new datasets.
Thanks,
Hi J_Constantine,
Welcome to the Apple Support Communities!
I understand that your iPad is restarting and not responding sporadically. You have already attempted some great troubleshooting steps and I think you are on the right track. Holding the home button is one step that you take while placing your device in recovery mode to restore. This is the method that I would suggest to restore. For complete information on how to place your device into recovery mode, please reference the attached article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Best regards,
Joe
Similar Messages
-
I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy
Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein -
Imovie song does not start at the beginning after I edited the duration of the clip
my imovie song does not start at the begining after I edited the duration of my clips. The audio clip now starts in the middle of the song. This is occuring with the second song in my video. How do I adjust the audio to start at the beginning of the song.
For pop ups. From your Safari menu bar click Safari > Preferences then select the Security tab.
Select: Block pop-up windows
safari starts always with top page even I have apple.com as a starting window
Back to Safari > Preferences. This time select the General tab. You can reset your homepage from there.
history its not saving or at least not showing when i press the thingy that looks like a little book on the tools bar
That icon represents your Bookmarks not history.
To view history, from your Safari menu bar click History > Show History
Or Option + Command + 2 on your keyboard. -
Boot Camp keeps crashing after i edited the info.plist
When I downloaded a Windows Home premium 64x iso file and it said it was 64 bit and it was, I was googling on how to fix it and I came across a topic that said to edit the info.plist file. After I edited the info.plist it stopped working and crashed every time I tried to run Bootcamp. SOMEONE HELP PLS!
Can you try to put back the original/unmodified info.plist file
which info.plist file is it ? -
Can't able to edit the query in query designner
Hello every one,
Please help me in below issue. It is really important.
Actually i have create the query in the BI- Development and that i pass to the production.
Now. I tried to again edit the same query in the development , and for that i have create a new request . after creating the requesting i again logged in to the BEx query designner , but still i can not able to edit the query..
i have create the request in the correct manner. So, what will i do now? Please help me in this.HI Gaurav,
Again i create a request by below steps
->open the ADW by RSA1
->go to Transport connection
->go to query element - > select my query -> select all necessary query element -> and then click on the truck symbol (i have not create BEx request)
and then i create the request
then i open the query in the designer and again i can not able to edit the query
error is same
-> BEx transport request is not available or not suitable
-> choose an existing request
Now,tell me what can i do? this is really an issue for me and help me to solve..Please all other can also give there comments
one more thing i want to add is , i have also check the object changabilty , there the query element and all related to query are "not changable". Is this an issue.
Edited by: james macwan on Oct 16, 2008 8:39 AM -
How do I edit the text in a pdf file that has been converted to a Word doc
How do I edit the text in a pdf file that has been converted to a Word doc?
Hi BridgetteJean,
Please go through this video this explains how to edit text in a pdf document.
http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/ -
Editing the Query name for all reports in PRD.
Dear All,
I have created 25 reports using Query Designer.We have moved all the reports to BI Production. And Clients are using these reports using the Tool Bex Analyser.
Every time they are navigating through open Query -> Info Areas -> Data targets and Query.
Instead of going this way, is there any other way to Open a query easily.
And they wants to modify the Report name and the Technical name for all the reports. Can we able to edit the Query name for all reports, or do i need to go for SAVE AS for all querys.
Pls Suggest.
Thanks,
RamHi Ram,
1. For the first question; if it user specific query then ask the users to save them at the FAVORITES so that there is no need to go to the dataprovider specific.
Or they can create the reports as favorites user menu screen of that particular user.
2. In order to change the technical name and description of the queries goto RSZC t-code> give the source and target infoprovider as same> select queries>click on the reports>click on transfer selections-->
Then you get a screen to change the description and technical name.
But this is pertained to Infoprovider level.
You can see all the reports on the infoprovider (cube/ods).
Hope you understood.
Regards,
Ravi Kanth -
I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!
The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store. -
I'm missing a lot of my pictures on my phone after going to the cloud. You cab see that the were there but it's just a grey tile now. When I click on it it just spins loading. Any help would be appreciated.
I, on the other hand, had no brightness issues on the 4S after upgrading to iOS 6, and no change in (good) battery life. If could be something else, an app or background process that is less efficient with iOS 6? Could be anything.
-
After I installed OS X Mountain Lion system, I can't use my Safari to log into my online banking and some other websites which require passwords. Can some one please help?
It could be browser incompatibility or something else. When you say you can't log in, what happens? Is the bank website generating an error saying you're not using a supported browser? Does the login form for your bank account display as usual, but once you submit the form to log in it doesn't work? Give me a specific step-by-step of what you're doing, such as...
1. I load bankofamerica.com
2. I type in my login
3. When I submit, the page does nothing
Obviously that may not be your issue, but giving us details like that will help us come to a quicker conclusion. -
Hi All,
I am running a fresh install of SCDPM 2012 R2 with a protection group that is backing up the 'C:\', Bare Metal and System State of some VMs. If i add any additional servers to the group since the first creation it returns the following error:
Modify protection group: System State & Bare Metal Recovery failed:
Error 419: DPM could not set security permissions on the replica or recovery point volume that was created.
Error details: The process cannot access the file because it is being used by another process
Recommended action: Review the error details, take appropriate action and retry the operation.
If i re-create the whole protection group it works fine.
Could any one advise any further diagnostics I can do to try and locate the reason behind not being able to modify the group after the first creation? I can add new servers to other PGs without any issues.
Thanks in advance,
DanIf you are protecting any of the system state/BMR protection. Can you stop protection by deleting the older recovery points and then recreate the protection group.
This thread mentions this to be a hardware issue, albeit with less information on what exact hardware issue:
https://social.technet.microsoft.com/Forums/en-US/480679c2-1079-4847-ab38-5cc8f454ef86/error-419-dpm-could-not-set-security-permissions-on-the-replica-or-recovery-point-volume-that-was?forum=dataprotectionmanager
Regards, Trinadh [MSFT] This posting is provided AS IS with no warranties, and confers no rights. If you found the reply helpful, please MARK IT AS ANSWER. Looking for source of information for DPM? http://blogs.technet.com/b/dpm/ http://technet.microsoft.com/en-in/library/hh758173.aspx -
I'm trying to restore our ipod after it was disabled. Keeps stating error 3194, this device isn't eligible for the requested build. Any suggestions?
See:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
Simulate the Query Builder functionality
Hi all,
I need to create in my application some functionality, such Query Builder: the drag and drop of tables, and graphically display of tables with the dragging possibility.
I have take a look into the source code of the query builder page, but does not understood, how to realize it. Has anyone idea?
RegardsLogin to my workspace on apex.oracle.com (vikasa/guest/guest) and check out the Apex - SQL Workshop application (20777) and see how various features are implemented.
[You are on your own though as far as support is concerned, none of the features and techniques used are documented]
As you know, building something like that requires a high degree of proficiency with the DHTML stack (HTML, CSS, Javascript, XHTML, etc)
Good luck. -
Is the Query Builder (QuB) fatally flawed? Or I, perhaps?
I have noticed at lot of issues on both the general and php discussion forums regarding the Query Builder. I just completed the contacts management system tutorial and everything worked fine until the last step which involved using the QuB. Has anyone else got this to work consistently?...
Folks,
"slow and not particularly intuitive."
ADDT in a nutshell?...
ADDT´s Query Builder is loaded in a browser, which - unlike a standard Windows/Mac/whatever application - has a completely different "memory management", and if you´re loading heaps of data (e.g. SQL results) in a browser, it can get real slow due to that.
Any real "application" is by nature superior to the Query Builder, but it´s like comparing apples with pizza, as the "runtime environment" is a totally different one.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
After update ipad3 to ios6, YouTube disappear. Where can I use YouTube?
after update ipad3 to ios6, YouTube disappear. Where can I use YouTube?
There's a new app in the app store from google. You have to search under iphone apps, it doesn't show under ipad apps.
Maybe you are looking for
-
I have robotic sound when using any type of audio, or video
Hi I have a brand new hp computer i bought it two months ago for college it has Windows 7 64-bit, and the sound or video comes out robotic everything from youtube, to itunes, to a website having a video in it, to solitare. I was wondering if anyone h
-
Error message loading Topaz plug-in
Using plug-in manager, I get an error message when trying to load the plug-in. What next?
-
I am consistently running into errors when uploading my prints to Apple. I never used to have this problem, but now I can only load a few pictures before I get this message. It says to check my network connection? Anyone know a quick fix for this? My
-
Invoice/payment delta loads
We have a web application that displays project/WBS related invoices and payments. We have found that different clearing document types, payment types, credit memos, etc. cause issues with delta loads to this application. Has anyone addressed this t
-
Recording Level Automatic Level Control
My ALC setting has changed. It used to be OK but now the check box is unchecked for every recording and the slider is maxed out! from the start My recordings are really too loud! How can I reset GB so that the ALC is on by default as it used to be? I