After i updated to mavericks, my usb ethernet adapter stopped working.

I'm not sure why, but when I updated my software to mavericks, my USB ethernet adapter stopped working.

I'm using that adapter:
http://www.edimax.com/en/support_detail.php?pd_id=445&pl1_id=5&pl2_id=26
After I updated to Mavericks, I installed the driver in this page, but it didn't work. Then I googled "AX88772" which is my adapter's part no. or something like that, and I installed that one:
http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=97
I wasn't expecting that work but that did work. So, I think the solution of the problem is finding the right driver. I hope you solve your problem too.

Similar Messages

  • USB Ethernet Adapter Stopped Working On Mac Mini Server Running 10.6.6

    Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
    The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.

    Douglas Urner wrote:
    Is anybody out there successfully using the Apple USB Ethernet adapter on a Mac Mini Server running 10.6.6? They have stopped working for me.
    The boot disk in the 2009 Mac Mini Server in my classroom failed and after Apple replaced the disk and I reinstalled SLS and ran Software Update to bring the machine up to 10.6.6 the USB Ethernet adapter that was the interface to the outside world no longer recognized when a cable was plugged in. The cable was good and worked just fine if plugged into another machine or the built-in interface. At first I thought that the USB Interface had failed but after trying two new ones (graciously exchanged by Apple) and finding that none of them worked I'm coming to the conclusion that perhaps the warning on the package that the USB Ethernet only works with the MacBook Air finally became true.
    Only the specific build of Mac OS X that comes with a MacBook Air includes the kernel extension to run the Apple USB Ethernet adapter, however there are no hardware issues preventing it being used on other Mac models if you have a suitable driver.
    Generic USB drivers can be downloaded for free from http://www.sustworks.com/site/newsusbethernet.html and this worked for me.

  • Hello. After this update(Java for OS X 2013-003) stop working Ps3 media server. How to fix it?

    Hello. After this update(Java for OS X 2013-003) stop working Ps3 media server. How to fix it?

    I fix it. I restored the contents of /System/Library/Java/JavaVirtualMachines with the contents found in my latest TimeMachine backup from before the update, PMS works like  again. Something in the latest Java update does break the PS3 mediaserver.

  • Why after i update my left and right arrow keys stop working

    my left and right arrow keys stoped working after i updated to Mavericks now the dont work

    Hello ccombs2014,
    It sounds like 2 of your keys are not working after updating to Mavericks. I found this section of an article for you to help troubleshoot this issue named:
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Some keys don't work as expected
    From the Apple menu, choose System Preferences.
    From the View menu, choose Speech.
    Click the Text to Speech tab.
    If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
    Click the Universal Access pane in System Preferences, click the Keyboard tab.
    Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
    In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
    If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
    If the issue persists, use Keyboard Viewer to help isolate the issue:
    Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
    Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
    Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
    From the Input (flag) menu, choose Show Keyboard Viewer.
    If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
    Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working.  If the keys work while started from the Install disc, then the keyboard itself is working correctly.  Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • I cant not get my USB ethernet adapter to work with my new Macbook Air.

    So this is the second adapter I have bought and it seems to not work still. I didnt check System info on the first adapter but on the second one i noticed this. The current required mA is unknown.  Is there a fix for this or should I try and get another adapter. I have the 2011 MacBook Air running lion.
    Apple USB Ethernet Adapter:
      Product ID:          0x1402
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:          0.01
      Serial Number:          15069A
      Speed:          Up to 480 Mb/sec
      Manufacturer:          Apple Inc.     
      Location ID:          0xfd120000 / 4
      Current Available (mA):          500
      Current Required (mA):          Unknown (Device has not been configured)

    Check System Preferences > Network > verify the Ethernet service is defined.   If not, click the "+" icon below the services list and add it.
    Regards,
    Captfred

  • After upgrading to OSX Mavericks my BT peripherals temporarily stop working

    I have a MacBook Pro 2009 with 4GB Ram, my only BT peripherals are a Logitech BT keyboard and Apple Magic Mouse.  After upgrading to OSX Mavericks the day of it's release the overall performance of my MacBook was increased and I was/am very happy with it.  My major gripe/annoyance is that upon opening a new application BT connectivity is totally lost and I have to revert back to my MacBook's keyboard and touchpad for a few seconds before BT comes back, and when it comes back it works flawlessly until I open another app or switch between certain apps.  This issue is new since the OSX Mavericks upgrade, and my hardware setup has remained unchaged from day 1.  It sounds like a software issue, and I was wondering if anyone else has had the same problem or has discovered a solution.  I have cycled power on the machine, and have left it completely off for 24 hrs before booting it back up with the same issue.  This isn't major, just annoying.  The only other thing I have is with Mail and my GMail account seeming not to sync up correctly.  Messeges archived on my iPhone 4S still show as unread on my Mail app even hours after the archive and both devices on the same wireless network, This never happened before the upgrade to OSX Mavericks... Everything used to sync up perfectly... Anyone have any ideas as to what may be going on??? Thanks!!

    Thanks Barry!!! I only reset the SMC and after booting up the system, bluetooth has maintained connectivity after switching between apps, open/closing apps works just as before!!! Thanks again!!! I can't believe such a simple work around would fix such an annoying issue.  BTW I didn't reset PRAM, didn't see the need to because everything works just fine now.  If I could only get the Mail app to correctly sync up I'd be perfect!

  • After ios update 7.0.6, my alerts/notifications stopped working...anyone know how to fix?

    Prior to update, I used to get a sound and notification message on the lock screen when an email or text message comes in, or voicemail or whatever...they all stopped working...only works now after update if screen is unlocked and using the phone...how to get it to work the way it used to?

    Check settings. Do not disturb. Turn off manual

  • USB Bluetooth adapter stops working after 10.8.5 upgrade

    For several months I've been using an IOGear USB Bluetooth adapter and a USB KVM to share my Magic Trackpad between a Mac Mini and a MBP, both machines happily running 10.8.4.
    Tonight I upgraded my MBP to 10.8.5 and now Bluetooth is apparently disabled when I have the USB adapter plugged in:
    Now I'm left with the unappealing decision of using my Trackpad with only my Mac Mini, my MBP, or constantly repairing it with either to share.
    I've been shockingly happy with this little trick, but I guess it was too good to last. Anyone have any ideas why using a USB Bluetooth adapter would stop working? Maybe I need a different adapter now?

    Thanks! That solved my problem. I just had to swap in my device id which was different than yours.
    I converted my USB adapter's idProduct value from hexidecimal (0x2101) into decimal (8449) and added this configuration:
                        <key>BroadcomUSBBluetoothHCIController_Dongle - IOGear2</key>
                        <dict>
                                  <key>CFBundleIdentifier</key>
                                  <string>com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport</string>
                                  <key>IOClass</key>
                                  <string>BroadcomBluetoothHostControllerUSBTransport</string>
                                  <key>IOProviderClass</key>
                                  <string>IOUSBDevice</string>
                                  <key>idProduct</key>
                                  <integer>8449</integer>
                                  <key>idVendor</key>
                                  <integer>2652</integer>
                        </dict>

  • After I updated to IOS8 my iPod 5 charger stopped working, it randomly shuts off when I have the charger plugged in and also when the charger is plugged in, it doesn't charge. The same charger worked on my iPod when I had iOS7. Please help!

    ipod 5 charger isn't working after updating to ios8

    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try another cable. iOS 8 seem to make the iPod more sensitive to marginal cables.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • After Mac OS X Mavericks upgrade native apple apps stopped working

    I cannot use app store, or preview or mail. The launch pad is blank with no icons for all the native apple apps.  Google Sync servcies keep crashing as well. Please help

    Are you running Google Drive? if so, uninstall it.
    If not try starting in Safe Mode and see if the problem still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Don’t just “hide” them by checkmark.
    Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours. Then log out and back in or restart and test.

  • HT1430 after i update to 7.0.4 the wifi stop working, am in qatar doha and i toke my phone from jordan, i don't wont any buddy to open it specially it's under warranty

    i try it, even i try hard reset. but nothing
    just search for wifi

    If the switch for wifi is grayed out, see this support document http://support.apple.com/kb/TS1559
    If it is something else, you can see this support document http://support.apple.com/kb/TS1398

  • Usb ethernet adapter, create network

    I'm trying to use the usb ethernet adapter to create a network notebook wi-fi.  I've had major headaches getting usb ethernet adapter to work, but when it is working and I try to create a network, problems reoccur with the adapter.  Can I expect to create a network while using the apple usb ethernet adapter?

    Did it do this on 10.7.3? We have this: plugging in a USB card reader drops the USB ethernet. It does it on 10.7.4, 10.7.5, 10.8.2 and 10.8.3 but not 10.7.3 ?!?

  • Usb video adapter not working in windows 8.1 on Hp Envy23

    Since upgrading to windows 8.1 on my Envy 23 all in one, the usb video adapter stopped working.  I cannot get my 2nd monitor to work.  Anyone have a solution to this? 

    Hi,
    It's not an HP product, please try its support page:
       http://www.geniatech.com/download.asp?id=1
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Bluetooth shuttted down after I updated to Mavericks, please help me !  I am 70 Years old and worked very happy with my iMac (21,5" mid 2010, 3,2 GHz Intel Core 3) until I updated him from  SnowLeopard 10.6.8 to Mavericks 10.9.2. 2 Days all was OK. Next M

    Bluetooth shuttted down after I updated to Mavericks, please help me !
    I am 70 Years old and worked very happy with my iMac (21,5“ mid 2010, 3,2 GHz Intel Core 3)
    until I updated him from  SnowLeopard 10.6.8 to Mavericks 10.9.2.
    2 Days all was OK. Next Morning-Start he needs (until now) 3 minutes to show me a SCREEN only milky white. After that he starts like ever with all ICONS in about 1 minute. (together 4 min.)
    ..But I must notice, that I cannot make anything, because the „BLUETOOTH APPLE WIRELESS KEYBOARD  and the APPLE  MAGIC MOUSE“ doesn't work anything like before.
    I could nothing do, I must drop my APPLE only out.
    That I maked ever 10x and all was the same... (Maveriks also 4x new updated)
    I taked my Logitech-Bluetooth-Mouse from the WIN-Laptop, dropped it in USB from iMAC...and in one second I could work only with this MOUSE...I buyd the Logitech COMBO K520 and all was OK now with my lovely APPLE iMAC to work with him...But without APPLE KEYBOARD and MAGIC MOUSE...and with a 4 min. -START until now.
    I  asked the EXPERTS from APPLE-SUPPORT under Tel. 0800-6645451 in Germany, became a Number, maked many Things by starting new, but the mistake after all is the same like before.
    When I look into ...Apple/ Info/System/ Hardware/ Bluetooth   ..my APPLE says: NO INFOs FOUND (Es wurden keine Informationen gefunden.)
    Under Hardware/ Diagnose : Selbsttest beim Einschalten: zuletzt ausgeführt: 15.05. 14, Ergebnis: Bestanden (that means OK) !!
    I asked many Peaple, who sold APPLE-Computers in the STORS, but they all had no IDEA, how they can help.
    I think, it could be a DRIVER when Starting the BIOS, JAVA RUNTIME a.s.o...
    Is an Expert under YOU to help me by my Problem with this iMAC ?

    dietmarfromdeu,
    if you start up your iMac in Safe mode, do you still have Bluetooth problems with your Apple wireless keyboard and Magic Mouse?

  • Apple USB Ethernet (A1277) not working with Mavericks on MBAir 2012

    USB Ethernet works on other computers (Mac Pro) and did work with this 2012 MBAir with OS X 10.8.
    Any ideas? Other brand USB ethernet adapters  (Cisco and generic Ebay USB 2.0 Gigabit adapter) work fine with this MBAir and Mavericks.

    That's an overly broad statement.  I have a TB equipped Mac Mini and the USB Ethernet adapter works fine with it.  It's only Fast Ethernet (100MB) while the TB adapter is Gigabit Ethernet (1000MB) but it does work. Also worked fine on my TB eqiuped MB Pro.  
    Cheers,

Maybe you are looking for

  • How to set session timeout per user

    Hi, Ho do I set the session timeout per User in the Application.cfm File?? I tried using <cfif SESSION.UID EQ 1> <CFAPPLICATION NAME="appControl" SESSIONMANAGEMENT="Yes" sessiontimeout="#CreateTimeSpan(0,0,20,0)#"> </cfelse> <CFAPPLICATION NAME="appC

  • Why don't I have my App Store apps after upgrading to iOS5?

    I just upgraded my iphone to iOS5. Before upgrading I created a backup in iTunes. After upgrading I restored from backup. All of the apps I downloaded/purchased from the App store are now missing on my iPhone Only the core apps that come preinstalled

  • Yoga 2 11 Poor Wifi connection and slow.

    My Yoga 2 11 is getting worse wifi speeds than my GS3 smartphone, I have already tried updating the drivers. I have installed all the drivers that came in the sub-partition of my laptop and also went to the lenovo website and got the latest WLAN and

  • How to install Norwegian and Portuguese in Dictation

    How to install Norwegian and Portuguese in Dictation & Speech?

  • What is this icon of a fork thing? How do I change it or get rid of it?

    Sorry, it looks like a fork to me. I first noticed it when I used iChat the first time after getting the new mini. The mysterious "fork" insidiously inserted itself as my chat icon. That was easy to fix... however... Where in the world do you get rid