After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail
After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail
Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.
Similar Messages
-
my macbook pro will not charge. the charger light is dim green and blinking.
Please make a Genius Appointment and take it in for service.You may have a bad charger, battery, or worse.
-
Hi. My macbook pro will not open the video files taken on a panasonic hd-sd10. is there a mac version of hd writer software that comes with the panasonic camcorder?
Could do with some ideas.
ThanksAsk Panasonic whether or not they provide OSX versions of the software.
Google the issue -
After updating to 10.10.3, now my Macbook Pro 15" (mid-2014) will not stay logged in. I log in after restarting, and it will stay logged in for 3-5 seconds then immediately log off and go back to the login screen. Any help?
By the way, I also updated my Macbook Pro 17" (mid-2009) and it seems to be running fine, though I haven't tried to restart it and log in. I'm afraid I won't be able to get this one to work either if I do.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Wiped macbook pro will not boot from install DVD
I recently purchased an older MacBook Pro that came with the OS system wiped but it did have the original Install DVDs. The computer will not boot from the DVD. I have booted holding down the C key and nothing happens. I have booted holding down the Option key and it shows the Install DVD and I select this and nothing happens.
How do I get it to open up the Utilities from the DVD to install the operating system?It could be a problem with the optical drive, but also may be due to the DVD's being for a different model.
Exactly which MBP do you have, and what serial numbers are on the discs ?. -
MacBook Pro will not see the NSA Drives Unless the NSA is restarted.
I Have two MacBook Pro's on a wireless AirPort network that has a D-Link 321 NSA connected tot eh LAN Hub. All computers including one of the MAcBook Pro's see the NSA Drives. The newest MacBook Pro will only see and connect to the NSA if I restart te NSA D-Link unit.
Any sugesstions on the setup or config of the MacBook that might help here.
Thank you
DomI have the same camera and never had a problem connecting it to my PC. I just bought a MacBook Pro and now I cannot figure out how to get it to recognize the camera either. Sorry I cannot offer any suggestions, but wanted to get on this thread to see if anyone else can help. Good luck!
-
How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!
The Adobe auto updater is highly unreliable.
You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
Adobe - Photoshop : For Macintosh
~~~~~~~~~~~~~~~~~~~~~~
Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
I dropped my external HD on my hard tile floor and now the drive is not working properly. I have tried a repair in Disc Ultilies with First Aid with no such luck. It started to work then I got a message "Filesystem verify or repair failed" about 3-4 minutes into the first aid repair disk. When I plug in I get the disk you inserted was not readable by this computer message. Please I need help on restoring this drive!
Its a simple tech pro drive 1TB.Unfortunately, a drive that has been mechanically damaged by a drop and can't be repaired using Disk Utility probably can't be fixed any other way either. The best you can hope for is to salvage as much data from the drive as possible using one of the data recovery utilities linked below, and then replace the drive.
http://www.prosofteng.com/products/data_rescue.php
http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
http://download.cnet.com/VirtualLab-Data-Recovery/3000-2094_4-10298807.html
If you can't recover your most important data using one of these utilities, the only remaining hope is a data recovery service, which is very likely to cost $1000 or more for a 1TB drive. -
My MacBook Pro will not download the new OS Mountain Lion...help
I've tried several times to download the Mountain Lion OS, and each time i'm getting a message "Product Cannot be Downloaded" and I click the retry button to no avail. Please help!
Thanks for the link! I've sent a message detailing my problem and we'll see what happens!!!
J -
I have recently switched from a PC to a MacBook Pro.
I have a large number of documents and photographs on a multiterrabite external drive, backed up on a second multiterrabite external drive.
Both external drives are formatted for MacIntosh. This has been verified by agents at an Apple store and also at Best Buy in two different cities.
This is the problem:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
Thanks!
Roderick Guerry
[email protected]Roderick Guerry wrote:
The MacBook Pro will not allow me to cut-and-paste to and from or to click-and-drag to the external drive. I can copy-and-paste, but then I must send the original to the trash, which doubles the time and effort. Is there any way to cut-and-paste?
No, this is a philosophical difference between Apple and Microsoft. Apple believes that it's dangerous to cut a file in case the user never pastes it; in that case the file is lost. Microsoft seems to not have this problem (if I remember Windows correctly) because they don't delete the originating file if it's cut but never pasted.
Even though Macs have a lot of keyboard shortcuts, philosophically Macs have traditionally been mouse-first. This applies to file copy operations. In your case, what a Mac user would do is open the source window, open the destination window (on your second drive), and then Command-drag the selected files from the source to destination window. This is because a normal drag would leave the originals behind, while adding the Command modifier key tells OS X that this is a Move, not a Copy, so don't leave the originals behind.
(In addition there are different rules for drag-copying within the same volume or between different volumes. If you drag between two folders on the same volume, the files are moved. If you drag between different volumes, the files are copied unless you hold down Command to delete the copies on the source volume.)
Roderick Guerry wrote:
Also, the MacBook Pro will not allow me to rename multiple documents or photographs. I can click-and-rename a single one, but this is impossibly time consuming. I can batch-rename in iPhoto, but when I transfer the photographs to the external drive, the rename does not transfer.
Two problems in this case. First, batch file renaming is not built into OS X unless you build something with Automator. However, there are many utilities that can do batch file renaming which you can find at macupdate.com or on the App Store. Since I work with media I often batch rename using one of the media managers I have lying around like Media Pro or Adobe Bridge (comes with Photoshop).
iPhoto is a database front end designed to shield the file system from the consumer and let them concentrate on creativity and sharing. As such it is often a poor choice for managing files directly. When you "transferred the photographs" chances are you moved the originals, not the ones iPhoto edited which are stored in a hidden folder.
Roderick Guerry wrote:
I’m reduced to using my wife’s Toshiba to cut-and-past, rename, and transfer documents. It works perfectly. Is there any way to do this on the MacBook Pro?
There will not be a way to do it exactly like Windows. As described above, there are ways to do it "the Mac way." If it is possible to remove judgment on which way is "better" you might find the Mac way to be acceptable, but of course sometimes we simply prefer what we're used to. -
After upating from Lion 10.7.4 to 10.7.5, my MacBook Pro will not reboot. Why? What can I do about it?
I ended up having to visit an Apple Store. They claimed that the update must have aggravated an already corrupted hard disk drive. The solution was to wipe my hard disk (fortunately I had recently backed up on Time Machine). The "Genius" also claimed this was the first time he had come across the problem. Although he was clearly able to diagnose it straightaway, and the next person he saw had exactly the same problem with his Mac, and I saw an awful lot of customers queuing up with their Macs and iMacs looking very suspiciously like they all had the same problem! So clearly Apple know what the problem is but as usual treat customers as if they're idiots in order to cover up the problem. But at least the problem is now solved (although having to take at trip out and wait in a queue at an Apple store, and then restoring from backups is a painstaking inconvenience I could well have done without). All I can suggest is that you might as well take it in. None of the "solutions" on the Forum are remotely on the ball, and all Apple "Geniuses" have clearly been told what the problem is and how to fix it. Good luck!
-
If anyone can assist with why my Macbook Pro will not pass the first screen, please respond. I have been getting the spinning pinwheel for a few days and cannot lg on now. In recent days I deleted some files and thought that would help the computer move a little faster but now it will not sllow me to access my account. Any suggestions on how to get pass the initial screen?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.
Have you tried holding the power button down for several seconds? I would try the force quit as mentioned earlier first, or go to the Activity Monitor in Applications>Utilities and try force quit there.
-
Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"
Did you try more than once? If so:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Hi Experts, i have designed a report for a customer using stored procedure. The customer saves an outgoing payment as a draft a then i have made some Auto-generating number which they use as a parameter to generate a report. Now the customer says the
-
Send button is not enabled in BI Publisher
Hi all, I have installed BI Enterprise Edition 10.1.3.4, made microsoft word templates (rtf files), and viewed report in BI Publisher. Now i want it to be send through any delivery channels. But in BI Publisher, the 'SEND' button under reports tab is
-
Language time-zone missing info
Hi, This is probably a bug or at best smoe missing info in the language support. If we set a non English locale the dates (name of day and month) are coming in the pecified language. However the time zone list ignores the locale and returns a string
-
is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?
-
Simple Vlookup from 1 DatagridView to another DatagridView .
Simple Vlookup from 1 DatagridView to another DatagridView. DatagridView1. Output Required: DatagridView2. If i Type Drake in A1 Result should be 2222222 in B2. Imp: Dont want to Open Excel sheet ,do Vlookup and close, is there any other way to Vlook