After installing 8.2 on my iPad all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using.
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...
Similar Messages
-
I was running an app and I tried to open the apps bar at the bottom, but the loading star appears and the phone reports entering into 'safe mode'. It says something about cydia, a program i haven't used but once, a really long time ago. how can i exit the safe mode? should i reset my phone? iphone4
Try a reset by pressing the Sleep/Wake button and Home button at the same time for ten seconds until the Apple logo appears. Note: No data will be lost
-
How can i delete the new feature "get in contact with your favourite persons"?? When u press the "home" button twice, theres a list on top of the ipad with the last persons youve been in contact with. How do i delete that, or some of them ;-) Sorry for the danish
You can turn that feature off in Settings>Mail, contacts, calendars>Contacts>Show in App Switcher>Recents>Off.
-
My iphone keeps blanking out and then when I press then home button it tells me the battery is dead. it has happened to me at 30%, but today it was at 71%, is there a fix for this?
This is often due to faulty battery. Make Genius reservation and take iPhone to Apple Store for free quick battery diagnostic testing.
-
Hi, my iPad suddenly froze while downloading a free kid's game, the loudness/soft symbol just kept on appearing no button works even the slide off/cancel. Then it suddenly turned off. I searched for troubleshooting guide, I tried pressing power/home buttons as instructed, charged/uncharged, and connected through usb using itunes but to no avail. What have gone wrong? I bought this in Vietnam but am here in the Philippines and still under warranty. Could I bring this unit to a service center of apple here in the Philippines?
Did you hold the home/power buttons for ten to fifteen seconds until the apple appears?
If still bad, try a restore from within iTunes.
If still bad, take it to an apple vendor for them to test/reinitialize for you. -
I used to be able to choose to receive notifications via iPhone speaker in ios6 by double clicking the home button. Ios7 took that away and I cannot see how to do it at all. I don't have my Bluetooth in my ear constantly!!!
If you are getting Siri when you double tap, then your home button must be sticking. Siri comes up when you hold the home button. Try tapping quickly twice. When that happens, the multi-tasking list comes up and you will see the app icon and then a thumbnail, or reduced size view of the app above it. You put your finger on that thumbnail and swipe upwards with your finger.
For that issue, you might want to do a reset of the phone. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. This will not affect your data.
To be honest, your novel is a little difficult to read, and I think you put too much information in there, and a lot of it is unnecessary. Be to the point and just add information necessary to understand the issue. -
How can I turn-off the apps which I have opened once in ISO 7.0.2. In previous version of ISO it was easy to turn-off the opened apps by double clicking on home button and then click and hold on respective apps then click on cross sign but in this version I could not do so and my iPad appears slower.
Close inactive apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen -
Hi! My iPhone 4S was turned off when the battery got empty, and when I put it on the charger it didn't charge at all. I tried restarting it (on/off home button for 10 sec) nothing happened except it kept giving me the "charge battery" on its screen. I tried with different chargers, still dead! What's weirder is that my sister who has iPhone 4 experienced the same today! No we don't live in the same house!! Does anyone have the same problem?
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice. -
HI all,
My iphone 3gs fell down and now it dosnt charge ,nor is the home button responding. there is a slight gap in the left side (back panel as well)..further the caller cant hear me but conversation is clear with earphones..plz helpsounds like the fall caused some damage. get it replaced through apple
-
hi please help i pressed my home button on my i phone 5 this morning to check the time and the screen went big as if its zoomed in i have switched the phone off but when it came back on the screen is still big i cant connect to i tunes either as i have a pass code on my phone i cant type it in as the screen is to big. please has anyone got any ideas on how to fix this.
tweetypie80 wrote:
thank you for your help
You're welcome. -
ipad not turning on.On charging apple logo appears in between.But its not turning on,tried to restore by pressing start & home button for 10 seconds.But its not working.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
HI. i'm on the beta version of iOS 7.1 (beta 3) and i wanted to get OTA update on my iPad2. after install, i unlocked my device and saw : it may take a few minutes to activate your iPad. after about 5 minutes, it was show an error : we couldn't activate your iPad at this time . please Help me !
Are you a developer? If so, post this question in the developer forum. If not, why are you using a beta version of ios 7? You need to restore your device as NEW in itunes and update the current software version.
-
Hi
thought to access this is was settings, general and home but apparently not. Checked google and they say teh same.
Can some one tell me where it's moved to?
thanks
IanNot quite true. On a 3G with iOS4, because multitasking doesn't work the double tap on home button still does what it used to do. You can choose WHAT it does in settings>general>home button
-
Using touch ID to wake up and unlock your phone or simulate press of home button when touch ID authentication is not requirethe.
The feature would be great to use. Could be placed on settings to enable or disable the option.When the phone is locked it would be nice feature to wake up the phone and unlock on touch of home button using Touch ID.
(Instead of pressing the home button). -
After install iOS 8.1.2 no Bluetooth connection could be made between iphone 6 and/or ipad and/or iPhone 4s
The iPhone is not designed to pair with an iPad (except for personal hotspot if your cellular plan allows it) or with another iPhone. What is it that you are trying to do? There are a number of features such as Handoff, Keynote Remote, etc that require Bluetooth to be on but the devices are not paired. See Bluetooth: Why can't I pair my iPhone or iPad with my computer?
Maybe you are looking for
-
Polygon Line (Stroke Size)
Hello, A friend in this forum once helped me to sort out a problem in the code below. The problem then was that I wanted to increase the stroke size of polygon lines. The polygon points represent cities. The example then was based on 2 cities and the
-
i started to work with labview newly, the task im tryin to do is the following : i have a microcontroller and i wanna know if it is alive or not .. simply am tryin to open a port (com) and to ping the microcontroller using the functions (.dll provide
-
Hello, I just have a simple question. In my Flex program, I am trying to find a way to listen for an incoming HTTP POST message - something with functionality similar to that of the HttpListener class in C#. I have not been able to find anything at
-
IDVD slideshow, bowed/ragged edges
I'm making a simple slideshow in iDVD 5 with various tiffs. When I play back the show on my TV, I get distorted/bowed edges for pictures that are rectangular and have bright areas along the edges. For instance, take a landscape with a bright sky. The
-
Help ! I am making a DVD for the high school baseball team and the banquet is next week. I did the same thing 2 years ago without incident. My iMovie is a slideshow of digital photos set to music. When transferring to iDVD, it encodes the menu, encod