After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

Thanks but I don't think this will help. Like I said, all of my add-ons were working fine and compatible until after running a previous version of FF. I am sure they are still compatible, but they are not working at all.
I even checked my profile folder and all of the extensions' data is all still there but FF5 is just not reading it correctly. (like adblock plus... I see the folder for it but FF5 doesn't have it on the add-on manager page when I run FF5)

Similar Messages

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?

Junk mail returns after deleting the item in the "Junk mailbox" and "Trash". Is there a way to permanently block the sender?
I have deleted the item multiple times both on my Mac mini and my touch and 5 minutes later it is back in my Junk mailbox. The item will not return to the Junk mailbox until it is deleted from the trash.

You can create a Rule
http://email.about.com/od/macosxmailtips/qt/How_to_Block_a_Sender_in_Mac_OS_X_Ma il.htm

Is there a way to permanently set the mailbox order?

Is there a way to permanently set the sequence in which mailboxes are displayed in the left-most panel of Mail? I can drag and drop the mailboxes into the order I want, and they seem to stick around - at least until I update any of the accounts. The moment I update an accounts prefernces in Preferences, Accounts, the display order is set to the same order that appears on the preferences display.
I have a fairly large number of email accounts, and often have to tweak settings, so it's a bit of a pain to have to reset the order every time I make a change.
This is occurring on both my MBP and my iMac.

Same question.
I recently left Snow Leopard to Mountain Lion.
Previously, in the side bar of Mail, (the one you make visible using "Show" in a previous post here), I was able to drag and drop any of the Reception mailboxes to the place I wanted to select, to put them in the order I wished, and this order remained until I decide to change it.
This seems not possible any more, or... just for the current session. If I close Mail and reopen, Reception boxes are re-ordered in alphabetic way.
Any way to make my choice permanent as before ???
To make it more clear, ordering my way is possible by drag and dropping for private mailboxes, but not for reception mailboxes associated to different mail accounts, the order is lost once Mail is closed.

Is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

is there any way to permanently delete the downloads in tunes that start everytime I open iTunes?

Ziatron wrote:
With Snow Leopard if you delete a file (put it the trash) and then do a secure delete it's gone.
The OP is adressing SSD's in particular. Neither Snow Leopard nor Lion have the ability to secure erase an SSD of a single file by user action. This because SSD's write data in pages, but can only delete in blocks. Secure emptying of the trash on an SSD is no different than a non-secure erase, as the controller will not permit erasure of blocks until the entire block is freed, which is almost never the case with even group file deletion. Erasure is simply the re-writing of the "allocation table" that the pages are no longer in use.
SSD's are only rendered "erased" of previous data after an indeterminate period of use, and re-use that would eventually free blocks for re-write, and then actually over-written.
TRIM helps speed this process, but does not alleviate the block versus page issue.
Some additional info.

HT201363 I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have

I don't remember my two security questions and I saw where you could send it to your email but the email it shows I could send it to is not the email I set up with it is there a way I can change the email on there to send to the email I have?

The Best Alternatives for Security Questions and Rescue Mail
     1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and can only run 10.4.11, consequently itunes will only upgrade to 9.2.1(4). Is there any way i can upgrade the phone so hereafter i will not need a computer to do it.

I have a 3GS phone that can no longer be upgraded on my Powerbook because it is ancient and the os will only run 10.4.11, consequently iTunes will only upgrade to 9.2.1(4). Please don't answer that i need to upgrade the computer os because that has been a past nightmare i have been through too many times.
Is there any way i can upgrade the phone w/o going to an apple store so hereafter w/ the upgrade to the new os (whenever that gets squared away), i will not need a computer to do it?
Thanks in advance,
don

Solved my issue by setting up a new account on my daughter's computer. Not 100% solved, but i was able to get the update on my 3GS.
don

Some of the pictures I am trying to use don't quite fit into the pre-set frames... Is there a way to move just the photo with-in the frame so to use the best part of the picture?

Some of the pictures I am trying to use in Idvd don't quite fit into the specified frame... Is there a way to just move the picture itself within the frame to use the best part of the pic... For example I'm trying to use a picture of my son..but his head gets cut off when I drag the picture into the place holder....

When trying to troubleshoot my problem I discovered a forum that was saying certain NTFS drives work just fine
Apple support says that an NTFS or exFAT drive cannot be used when connected to the AirPort Extreme.
I suppose it is possible that someone might have been using some type of special software on the drive that might perform a "conversion", but without more details, it is hard to know.
Note: ExFAT and NTFS formats aren't supported.
http://support.apple.com/kb/HT2426

Is there a way to permanently connect the ipad 2 to the 3G signal of my carrier?

I am a bit frustrated because after being connected to the 3G signal of my carrier, I would eventually be transferred to the Edge signal after a few minutes. Is there a way to force my ipad 2 to only connect to the 3G signal?

No.

Re: Docs and Data - In my Jamie Oliver app (app size 244MB) i have used also used 633MB docs/data - is there any way to back up the docs and data so i dont have to download it all again when i update my operating system? (as i tunes only backup app itself

Document and Data backup ? - can it be done??
Sorry if this question has already been answered before but im not phone savvy...at all!!!
I have a Jamie Oliver appl that is 244MB, but in it i have downloaded 633 MB docs and data - but the only bit that itunes backup is the 244MB app,...is there any way i can save/backup the 633MB bit too so i don't have to download all the videos/recipe packs again (i know it wont cost to download them again, i just dont want to take up the time and use my downloads).
Any help would be appreciated...thanks, Kirst

Document and Data backup ? - can it be done??
Sorry if this question has already been answered before but im not phone savvy...at all!!!
I have a Jamie Oliver appl that is 244MB, but in it i have downloaded 633 MB docs and data - but the only bit that itunes backup is the 244MB app,...is there any way i can save/backup the 633MB bit too so i don't have to download all the videos/recipe packs again (i know it wont cost to download them again, i just dont want to take up the time and use my downloads).
Any help would be appreciated...thanks, Kirst

How do i copy several tracks at the same time in Logic Pro or is there a way to set multiple loops in one song?

For example in an AABA song format, do I have to record the 3 As and then do another to fade out and end? Seems like it would be much easier to create the part once and tell LP how many times and when to repeat each part. HELP!!

Do you have to copy each track separately? It would be much easier if I could select all the tracks together for copying/pasting.
You cannot select multiple tracks in LP9, but you CAN select multiple regions. Use Shift-Click to select the parts on the tracks you want to copy, then hold the "option" key and drag them to the new position. This will create a copy at the new position.
Let's say you have tracks for piano, drums and bass. In the arrange window, click on the 8-bar "A" part for piano. Hold shift key and click on the drums region then again for the bass region. All three will be selected. Now hold the option key and drag all three sections to the right to place them on bar 25.
Also, how do you specify that you only want to loop X times? I can get a perpetual loop but I have to turn it off to get it to stop. This is very inconvenient when I'm playing.
You can control looping in a few ways.
1. Go to a region that does NOT have looping checked. Click near the TOP RIGHT of the region in the arrange window. Drag to the right to specify where the looping will stop. This is tricky... if you click too low, it will extend the length of the region. You must click the correct spot near the top to control looping.
2. For a region where looping is checked, go to the end of the region in the arrange window (at the end of the song) and do as #1 above. Drag to the left until you reach the point where you want the region to stop looping.
3. Use the "pencil" tool to create a blank region where you want the first region to stop looping. If your 8-bar verse is repeating once, create a blank region at bar 17. The first region will stop looping there.
Hope this helps.

Why is the furious 7 album split up? is there a way to put all the songs together

For some reason the furious 7 album is split up, it says that they are all from the same album but they are not together is there a way to make them be together?

iTunes will group tracks into an album if:
all tracks have the same Artist value and the same Album value, or
all tracks have the same Album Artist value and the same Album value, or
all tracks have the same Album value and the Album is a compilation ... flag is set for all tracks
In the case of a soundtrack album with tracks credited to different artists, you should apply the second rule (typically setting the Album Artist field to "Various Artists") or the third rule.

I made a mistake and deleleted all the sent messages in my mail box is there any way to get all the messages back?

and of course then i deleted everything that was in the trash before i understood that i made the wrong decision ... any way to get the messages back from Apple Servers?
Of course, it's not the real truth, the real story is that i made that on my wyfe's computer and i'm now in real trouble with her!

Unfortunately, I use Time Machine on my own computer (on my nas) but I never been succesfull trying to use Time Machine on the same Nas with my wife's computer ... so Time Machine is not the solution ... anyway that Apple could help? My life will be painfull for the next days !

Is there a way to permanently change the input language in the login screen?

Whenever I start my iMac with Mavericks, after the boot is complete and the login window appears, I have the change the language in the top right corner from US to DE, else I can't type in my password. Mavericks does not remember this setting, next time after startup I have to do it again. The original owner of this Mac was using US as input language, so I guess that's where it's coming from. This extra step of changign language only takes a few seconds, but many times I forget it and try to enter my password but it will not work. There must be a console command or somethign that can fix this? Thank you!

I managed to find the solution myself. If anyone is interested, just follow those steps here:
http://apple.stackexchange.com/questions/44913/make-a-custom-keyboard-layout-the -system-default-even-for-the-login-screen
(terminal skills required tho)

Is there a way to permanently change the default video player to VLC?

I installed the QuickTime update and now all my AVIs won't play with sound. Downloaded VLC and they will play with sound. I went to 'Get Info' on an avi and changed 'open with' to VLC and selected 'change all'. They will open and play with VLC until I re-boot, then everything changes back to QuickTime. Right now I just hate Quicktime and don't want to use it. How can I change the default video player to VLC without Quicktime changing it back when I reboot?

How can I change the default video player to VLC without Quicktime changing it back when I reboot?
Sounds like you changed it properly. The question now becomes, "Why isn't the change being saved?" Have you tried repairing your disk permissions? As to the original problem, it could be that the QT upgrade has rearranged the order of your stored codec components table called by QT. While this table is rebuilt each time the QT Player is opened, the table seems to be ordered from latest component installments to oldest. So there is the possibility that two (or more) components are allocated for playback of you AVI files and the wrong one now has priority. If you can find it (e.g., possibly Perian), you could simply remove it from the QT components folder and then replace it to again change the "build" order for the table. (Basically, you would need to run a component conflict test strategy here.)

Is there a way of permanently increasing the size/boldness of incoming emails

I find it difficult to read the font of incoming emails as it is two small. Is there a permanent way of increasing both size of boldness of incoming emails?
I use firefox and my emails come via talktalk

-> [[How do I use Zoom?]]
* press '''CTRL + +''' to '''Zoom In'''
* press '''CTRL + -''' to '''Zoom Out'''
* press '''CTRL + 0''' (zero) to '''Reset Zoom'''
The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox. Try these extensions:
-> Default FullZoom Level 4.6.1
* https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/
-> NoSquint 2.1.2
* https://addons.mozilla.org/en-US/firefox/addon/nosquint/
Check and tell if its working.

After installing FF 5.0 I am receiving a list of incompatible Add-Ons. I go into 'Extensions' and click to remove them, exit FF and lauch FF again, the same incompatible add-ons list appears. Is there a way to permanently remove the old Add-ons?

Similar Messages

Maybe you are looking for