After installing iPlanet Web Server v6 SP2, there is error message: https-admserv60 cannot be found??

After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinaca

this will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors

Similar Messages

How to install iPlanet Administrative Server while installing iPlanet Web Server Ver 6.0 Service Pack 3 in SUN Ultra 10,Solaris 5.8

We are the partner of Sun Developer Connection Program.
Company: ITI Ltd.
Member no: 1024878
We tried to install iPlanet Web Server ver 6.0
Service Pack 3, in Sun Ultra10 Solaris 5.8 machine.
During the time of installation it is giving Error:
Failure installing iPlanet Administration Server
Do you want to continue? if Yes
it starts poceeding with the installation and again gives an Error:
Failure installing Core Java Classes.
Do you want to continue? if Yes
It completes the installation.
But startconsole cannot be executed.
Please send the solution.

May I ask where did you get the bits for iWS 6.0 SP3? The latest version currently available for download is iWS 6.0 SP2.
http://wwws.sun.com/software/download/download/
Thanks

Installing Iplanet web server and directory server behind a firewall

When installing iplanet web server and directory server behind a firewall - should the interal ip address be used or the external ip address?

Hello,
When you are installing iplanet web server behind a firewall,you should use the internal ip address in the firewall.
1. The external ip address connection to the Internet. The type of IP address used?dynamic (commonly used for standard
modems) or static (commonly used for cable modems) is dictated by the ISP to which you connect and the type of service it provides.
2. The internal ip adress connection. This connection must be a static IP assignment, and it must be assigned by you.
obviously it depends on the type of firewall setup you have.
Thanks
Selva

After installing the latest of iTunes the original files for almost 300 songs cannot be found for syncing to my iPod. The files are songs that were bought from iTunes, and copied into iTunes from CDs.

After installing the latest of iTunes the original files for almost 300 songs cannot be found for syncing to my iPod. The files are songs that were bought from iTunes, and copied into iTunes from CDs.

Apparently, security programs like Macafee and Norton view Itunes updates as new programs and block then from access. If you add Itunes to the list of exemptions, it solves the problem.

After upgrade to 9.01 startup of firefox gives error message MOZCRT19.dll was not found

After the upgrade to firefox 9.01 with windows xp I get every time firefox tries to launch the error message "This application has failed to start because MOZCRT19.dll was not found. Re-installing the application may fix this problem".
Well, re-installing does not fix this problem!
I even de-installed firefox, cleared all folders with the hint of mozilla or firefox in its name and did the same with the registry, re-installed firefox 9.01 but always get the same result.

If you use ZoneAlarm Extreme Security then disable Virtualization and reinstall Firefox.
See this for a similar issue caused by ZoneAlarm:
*[[/questions/880050]]
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

After upgrade to snow leopard my printer does not work. shows that is idle but get a error message that printer cannot be found

after I upgraded to snow leopard my printer does not print. I get an error message that says printer cannot be found. my printer status says my printer is idle, but is green.

You forgot to mention what printer you have, but you may need a new driver:
Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

After installing a iTune upgrade I'm getting this error message

iTunes could not connect to the iTune store. Make sure your network connection is active and try again.
Anyone have any ideas?

Are you running any of Symantec's (Norton) or McAfee's Internet security products or anything similar, or an antivirus/antispyware application? There have been reports that some such utilities treat an upgrade to iTunes as a new application and can block the application from connecting. So you have to go in and reset the utility to allow iTunes. The same thing can happen if you upgrade the security product (this has particularly been a problem with recent McAfee upgrades).
Check the settings for your utility. If iTunes is still listed, remove and re-enable the exception for iTunes. Consult your utility's documentation for the appropriate procedure; you can find instructions for Norton on Symantec's web page for iTunes. You may also need to check the built-in Windows firewall as well.
Hope this helps.

What to do when signing in after installing on an new computer when I get error message 400?

I have insatlled my Photoshop Elements and Premiere Elements on my new computer. When trying to sign in to the program, I get the following message: "Photoshop.com services are currently unavailable. Please try again later or check your network connections: error 400"
I signed in using my adobe.com id (email address) and my adobe.com password (which work fine). I am connected to the internet so that is no problem. WHat do do?

Are you using the PSE9 Organizer? If so are you intending to make an Organizer back-up and then restoring to the new computer or are you starting over?
You can sign-in to revel using the link below if you simply wish to download copies of jpeg's to a folder.
https://www.adoberevel.com/

I tried to update lightrooom 5 to version 5.5. but I cannot install the update as I always get the error that adobe_lightroom_x64.msi cannot be found. I have downloaded the installation file with other browsers buit it didn't help. I can't even deinstall

I'd appreciate any help.

Denge75 it sounds like there is an improper entry within your registry for Photoshop Lightroom. I would recommend uninstalling Lightroom 5.3. Once removed then please also use the Microsoft Fixit utility at Fix problems that programs cannot be installed or uninstalled to remove any renaming entries for Photoshop Lightroom.
You should then be able to download and install Lightroom 5.5 directly from Adobe - Lightroom : For Windows.

IPlanet Web Server 6.1 ERROR ,URGENT

I've Installed iPlanet Web Server 6.1 in Solaris 9 I have installed iPlanet 6.0 too its working good but 6.1 is sending this error when strating up.
warning: CORE3283: stderr: There was an error trying to initialize the HPI library.
warning: CORE3283: stderr: Please check your installation, HotSpot does not work correctly
warning: CORE3283: stderr: when installed in the JDK 1.2 Solaris Production Release, or
warning: CORE3283: stderr: with any JDK 1.1.x release.
catastrophe: CORE4005: Internal error: unable to create JVM
failure: CORE4009: Failed to load JVM (check your JRE)
failure: CORE3187: Late initialization failed: Error running init function load-modules: initialization of /aplicaciones/bin/https/lib/libj2eeplugin.so failed
Can enybody Help me with this???
THANX!!

Hello Dear Friend Urgent Programmer
I'am Alfonso Franco member of Sun Developer
that is requested your questions Look:
1 - Please check out your System is ready to download this iPlanet Web Server 6.1
2- Suppose that you System is ready needs to
configure your setup add/remove program in
you computer that matches with the Web Server
3- if continue the problem error after this
analize very fine the problem and for end
we going to create the exact library and
port in it's Servers with a Java Program Database .
well my friend expect that thoses advice may serve something to solve this
problem for more contact to [email protected] to follow helping sincerely as "Good Programmer "

Calling servlet problem in iPlanet web server.

Hello, friends.
I have installed iPlanet web server 6.0. After installation I am using the default virtual server only. Thus, for all testing pages also, I use the default Document Root only (C:\iplanet\servers\docs\testsite) (I think, here "docs" is the default document root, right? If I am wrong, please correct me). I have got 2 JSP pages and 1 servlet. I put the JSP pages, into "testsite" folder and put the servlet into a folder called "myservlets" (C:iplanet\servers\docs\myservlets).
The jsp1.jsp page calls the servlet.class and in return the servlet redirects to jsp2.jsp page.
My question is: what paths should I use in jsp1.jsp file and in servlet.class file?
Thanks in Advance for all your help,
~ Nirav

There is a major security breach in authenticating
iPlanet Web Server 6.0 SP3 and SP4 using Sun ONE
Directory Server. Using a valid user id, any
password except null string would allow user access
the restricted resources. iPlanet Web Server 6.0 SP5
and 4.1 SP12 worked fine with similar configuration.Did you get an answer for this?
We are having the exact same problems with our iPlanet Web server 6.0 SP3.
thank you.

IPlanet Web Server & Glassfish not takeover session from stoped instance?

I have 3 Physical Machine
1> server hostname is 'linuxgf175'(192.168.1.175) main cluster control (DAS) and Install iPlanet Webserver with gflb-configurator
2> server hostname is 'linuxgf170'(192.168.1.170) server for node1(n1) has Instance1 (i1)
3> server hostname is 'linuxgf180'(192.168.1.180) server for node2(n2) has Instance2 (i2)
1. I was install iPlanet Web Server to same DAS machine. (192.168.1.175)
2. And create Server Certificates request.
Certificate Details
Nickname cert-linuxgf175
Subject CN=linuxgf175
Issuer Self Signed
Key Type RSA
Key Size (bits) 1024
Valid From April 18, 2011 7:30:09 PM ICT
Valid Till April 18, 2012 7:30:09 PM ICT
Fingerprint CE:D8:5E:97:DB:56:89:00:56:A7:0F:EB:0D:D4:4A:06
Serial Number 00:94:26:11:AB
Server Name linuxgf175
(Picture : http://s138.photobucket.com/albums/q262/madoatz/?action=view&current=iPl... )
3. And create new http-listenser (SSL for communicate with DAS port 8082 )
(Picture : http://s138.photobucket.com/albums/q262/madoatz/?action=view&current=iPl... )
4. And import cert file(s1as.rfc) to glassfish-lbconfigurator wizard. (run lb-configure command #java -jar glassfish-lbconfigulator.jar )
I was exported that file like this command :
keytool -export -rfc -alias s1as -keystore /usr/glassfish3/glassfish/domains/domain1/config/keystore.jks -file ./s1as.rfc
5. Create and Apply http-lb to DAS domain success !! :)
asadmin> create-http-lb devicehost linuxgf175 deviceport 8082 --target c1 cluster_lb
Enter admin user name> admin
Enter admin password for user "admin">
Command create-http-lb executed successfully.
asadmin>
asadmin> apply-http-lb-changes cluster_lb
Enter admin user name> admin
Enter admin password for user "admin">
Command apply-http-lb-changes executed successfully.
6. Deploy "clusterjsp.ear" Application to Cluster c1 with avalibilityenable=true
deploy success
(Picture : http://s138.photobucket.com/albums/q262/madoatz/?action=view&current=iPl... )
7.try to open application , use browser open to iPlanet webserver success
http://192.168.1.175:80/clusterjsp
## But, It can not handle session between instance (i1) and Instance 2 (i2)
i input some data session into instance (i1)
HttpSession Information:
Served From Server: 192.168.1.175
Server Port Number: 80
Executed From Server: linuxgf170
Executed Server IP Address: 127.0.0.1
Session ID: 3ed17253ef55fb5d37203a738e2b
Session Created: Thu Apr 21 00:20:08 ICT 2011
Last Accessed: Thu Apr 21 00:20:08 ICT 2011
Session will go inactive in 1800 seconds
INPUT : test1 = test1
INPUT : test2 = test2
after that try to stop Instance (i1) linuxgf170
come back to browser and refesh button. It's change route display to instance i2 (linuxgf180)
HttpSession Information:
Served From Server: 192.168.1.175
Server Port Number: 80
Executed From Server: linuxgf180
Executed Server IP Address: 127.0.0.1
Session ID: 3ee66ddd60498d68660a55fadcc5
Session Created: Thu Apr 21 00:21:34 ICT 2011
Last Accessed: Thu Apr 21 00:21:34 ICT 2011
Session will go inactive in 1800 seconds
BUT INPUT DATA is not display ?? I loss...session.
Please sir.... please see image url and help clarify T_T
Can direct contect to me for more help Thank you very much for best support.
[email protected]
skype : mr_lalit

More iPlanet startup log....
[root@linuxgf175 webserver7]# cd admin-server/
[root@linuxgf175 admin-server]# cd bin/
[root@linuxgf175 bin]# ./startserv
Oracle iPlanet Web Server 7.0.9 B07/04/2010 01:31
info: CORE3016: daemon is running as super-user
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.6.0_20] from [Sun Microsystems Inc.]
info: WEB0100: Loading web module in virtual server [admin-server] at [admingui]
info: WEB0100: Loading web module in virtual server [admin-server] at [jmxconnector]
info: HTTP3072: admin-ssl-port: https://linuxgf175:8989 ready to accept requests
info: CORE3274: successful server startup
[root@linuxgf175 bin]# cd ../../
[root@linuxgf175 webserver7]# pwd
/usr/glassfish3/webserver7
[root@linuxgf175 webserver7]# cd https-linuxgf175/
[root@linuxgf175 https-linuxgf175]# cd bin/
[root@linuxgf175 bin]# ./startserv
Oracle iPlanet Web Server 7.0.9 B07/04/2010 01:31
info: reports: Initializing lbplugin BuildId: GlassFish 3.1 load-balancer plugin b05
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.6.0_20] from [Sun Microsystems Inc.]
config: , name-trans-passthrough reports: init-passthrough has not been called
config: , name-trans-passthrough reports: init-passthrough has not been called
config: , name-trans-passthrough reports: init-passthrough has not been called
warning: reports: lb.configurator: XML_VALIDATOR_WARNING: Cookies will not be rewritten by web server. All cookie updates will be handled by application server. If you are using older version of application server, then failover will not work.
warning: reports: lb.configurator: Preferred failover instance feature is enabled.
warning: reports: lb.runtime: RNTM2019: Daemon http://linuxgf170:28080 has been intialized.
warning: reports: lb.runtime: RNTM2019: Daemon https://linuxgf170:28181 has been intialized.
warning: reports: lb.runtime: RNTM2019: Daemon http://linuxgf180:28080 has been intialized.
warning: reports: lb.runtime: RNTM2019: Daemon https://linuxgf180:28181 has been intialized.
warning: reports: lb.runtime: RNTM2019: Daemon http://linuxgf170:28081 has been intialized.
warning: reports: lb.runtime: RNTM2019: Daemon https://linuxgf170:28182 has been intialized.
info: HTTP3072: http-listener-1: http://linuxgf175:80 ready to accept requests
info: HTTP3072: http-listener-ssl: https://linuxgf175:8090 ready to accept requests
info: CORE3274: successful server startup
[root@linuxgf175 bin]#

Maximum number of simultaneous CGIs on iPlanet Web Server 6.0

I have installed iPlanet Web Server 6.0 on a Windows 2000 Advanced Server SP2 machine. I have configured a directory as CGI directory. The actual CGI is an exe written using C++.
Now when I try to access this CGI from the browser, only 1 CGI is loaded at a time even if I send requests for multiple CGIs. I have added the following lines to my "magnus.conf" file:
RqThrottle 128
MinCGIStubs 10
CGIExpirationTimeout 36000
MaxCGIStubs 100
CGIStubIdleTimeout 0
But still the CGI launching is being serialized with only 1 CGI being launched at a time. What could be the reason for this? Can anyone help me out on this one?
Thanks in advance.
Varun Goswami

You can try adding the following directive to your config\magnus.conf configuration file:
KernelThreads 1
This directive instructs the web server to use native (kernel) threads to service requests.

Is there a restriction on length of Http request posted to a Iplanet Web Server ?

I am submitting an Http Request by POST method to my server. The request will be received and forwarded by Iplanet Web Server to a clustered Weblogic environment, which will then be handled by Java Servlets. The problem I am facing is that when the length of the request shoots up to around 2000 bytes, NES doesn't receive and forward the request to Weblogic. There is no fixed cut-off for the length, it keeps fluctuating.
I observed the following after hitting the server hundreds of times with Http Requests that vary in length.
1) If length of Request is below 1500 bytes, request always goes through successfully.
2) In a range of 1500 bytes to 2000 bytes, request fails most of the times. (Around 80 %)
3) Requests with length above 2000K invariably fail, though it just worked for a 2.4K request on one occasion (out of some 100 hits)
Note that by "length of request", I mean the data I post through Http Request (I just have a single parameter in Http request having the literal "XML" as key and a well formed XML document as value. That is equivalent to submitting a HTML form just having a text area called "XML" containing a XML document. )
I presume that the length of actual Http Request is slightly greater than that of XML (probably by around 100 bytes).
My Iplanet documentation says that the upper limit on the length of a POST Http Request is 64 K, which is way above the value (2-3 K) at which I am facing the problem.

Hi Ganesh
Did you check the HTTP Persistent timeout of your server? Check the value which has been set up by default. Try increasing the timeout value and try again.
follow these steps it might solve your problem:
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)(note : if you are posting large amount of data or file increase the value accordingly)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
If this doesnot solve your problem notify me
regards
T.Raghulan
[email protected]

Error occur when installing iPlanet App server 6.0 SP2

Dear All,
I have problems in installing the iPlanet App server 6.0 SP2 in Solaris.
I choose typical installation and select default settings.
- install iplanet server
- typical install
- install ALL components
However, the following errors occur during the installation:
sh: ./pre_nas_preinst: not found
ERROR. Failure installing iPlanet Application Server Web Connector Component. Do you want to continue [n]?
ERROR. Failure installing iPlanet Application Server Core Server Component. Do you want to continue [n]?
ERROR. ...........
What's the problem with it? Could anyone help....?
Thank youin advance.
Thx & Regards,
Yvonne

I would recommend to use the latest version of application server which is iAS6.5sp1MU2. Try this out and see if you run into any problems. Also please check the release notes available at docs.sun.com to check the compatibility.

After installing iPlanet Web Server v6 SP2, there is error message: https-admserv60 cannot be found??

Similar Messages

Maybe you are looking for