After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer.  Any suggestions?

After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

Installing the new os may have tricked one of the three devices involved.  If it used to work, it will again.
Reboot the printer.   Reboot the router.  On the pad, general, reset, reset network connections. 
Make sure all the devices are on the same wifi network.   Talk nice to it.

Similar Messages

  • I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • Can not open itunes after installing latest version update 11.2

    Can not open itunes after installing latest version update 11.2

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Will not start even in safe boot after installing latest camera update

    MacBook Pro will not start even in safe boot after installing latest camera update.
    I started my machine and did a software update. Only the camera update needed. So installed and when required I pressed restart. It restarted and did install. Then restarted again. I expected to get to the login screen and it turned itself off. Tried three more times. Each time shutting off. I unplugged everything, and pressed start waiting for log in window. No it shutdown before the log in window. I then tried safe mode and that did not work either on three more occasions.

    I have managed to resolve some issues. I can now restart the machine via a CD boot. If I do cmd C into something like tech tool pro, then restart from that disks menu it restarts every time.
    If I try a safe start it shuts down. If I try a normal start it shuts down. I have managed to repair permissions and that cleared up some start up permissions but with no improvement to the boot problem. The only way to load is via the cmd-C boot option. Any other ideas?

  • All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!

    All applications in iWork fail to open after installing latest apple update. iMac running 10.6.8 Snow Leopard. Have tried reinstalling from iWork disc but no improvement. Help!
    Error report as follows
    Process:         Pages [208]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.1 (923)
    Build Info:      Pages-9230000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [93]
    Date/Time:       2012-08-22 12:33:15.909 +0100
    OS Version:      Mac OS X 10.6.8 (10K549)
    Report Version:  6
    Interval Since Last Report:          102101 sec
    Crashes Since Last Report:           11
    Per-App Interval Since Last Report:  2217715 sec
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      1FA704D3-D5EF-4CE3-9813-42E4559157DC
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Symbol not found: _SFAAutosaveUserActivityException
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Expected in: /Library/Application Support/iWork '09/Frameworks/SFArchiving.framework/Versions/A/SFArchiving

    I'm having this issue as well only with a little different twist I guess. I'm transferring the iWorks applications from my Macbook Pro 3,1 with Lion to a new MBP 10,1 running Mountain Lion. I transferred the apps over using DropCopy since the older MBP doesn't have AirPlay. Applications show up but crash upon opening. This is the first install so there are no previous plist, versions or such to delete. All three crashed upon opening every time until I just had to have Keynote and purchased again - although Apple agreed to refund that purchase since my previous version quit working. Any ideas since I don't have any previous plist/versions to delete? Thanks in adavnce for any help you can offer.
    Process:         Pages [13521]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.3 (1048)
    Build Info:      Pages-10480000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [153]
    User ID:         501
    Date/Time:       2013-03-11 14:57:02.175 -0400
    OS Version:      Mac OS X 10.8.2 (12C3103)
    Report Version:  10
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @rpath/SFCompatibility.framework/Versions/A/SFCompatibility
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Reason: image not found
    Binary Images:
        0x1000 -   0x354fe3  com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      0x3ec000 -   0x46bff7  com.apple.iLifeMediaBrowser (2.7.2 - 546) <24A0A118-874B-3C7C-B50C-C80BED03A15F> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x8fe3e000 - 0x8fe70e57  dyld (210.2.3) <23DBDBB1-1D21-342C-AC2A-0E55F27E6A1F> /usr/lib/dyld

  • After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.

    After installing OSX Mountain Lion I can no longer add attachments of any kind to my e-mails.

    Wait for the developers to update their games to work with Lion.

  • After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

    After the most recent update, I can no longer access stand alone GPS services. What's up with that? I am now forced to use google location services which use up some of my data allotment.

        ddmathias, I want to make sure all services are working correctly on your phone. What GPS services were you using before the update happened? What kind of issues are you having with the services? Do you get any kind of errors? Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • HT2500 After my last software update I can no longer access my mail.  message displayed says "you have mail version 4.5 this cannot be used on  Mac OS X Version 10.6.8 .  How do I fix this???

    After my last software update I can no longer access my mail.  message displayed says "you have mail version 4.5 this cannot be used on  Mac OS X Version 10.6.8 .  How do I fix this???

    See possible fixes here.
    https://discussions.apple.com/message/19760703#19760703
    https://discussions.apple.com/thread/4311280?tstart=0
    https://discussions.apple.com/message/19710911#19710911
    Some have reported success simply by reinstalling the update.
    http://support.apple.com/kb/DL1586
    Or download and apply, or reapply, the 10.6.8 Combo update first, then apply the Security Update again.
    http://support.apple.com/kb/DL1399
    I'd suggest starting with the simplest of these fixes, so look them over first.

  • How can I Print a 4X6 postcard on a hp officejet pro 8600

    How do I print a 4X6 postcard on a hp officejet pro 8600?  I've got postcards in the tray 1 slot on top of the printer, and have selected 4X6 card in the properties with both the auto select and tray one, but no matter what I do, it still prints out from tray 2 on 8X11 paper. Any help would be appreciated?

    Hi, Please install the latest firmware from link below for the printer and try again. Assuming your printer is Officejet pro 8600 premium or plus http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-102210-4&cc=us&dlc=en&lc=en&os=4063&product=4323648&sw_lang=

  • How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this.

    How can I print from my iPad through my Mac Book Pro which is connected to a printer?  I was told I could do this when the iPad and Mac Book Pro are synched together.

    Antique lady wrote:
    So If I download Printopia on my Mac Book Pro, do I go to iTunes to somehow connect the computer and the iPad? 
    No.
    Printopia (running on your Mac) connects the iPad to your printer.

  • How can I print from my iPad 2 using an HP Artisan 810 printer.

    How can I print from the iPad 2 using an Epson Artisan 810 printer.

    You said HP in your post title and Epson in your body text, but I think it is actually an Epson Artisan 810.
    If that's right, then the free Epson iPrint app should work for you - it lists your printer as one that it supports: http://itunes.apple.com/us/app/epson-iprint/id326876192?mt=8

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • Can i print from my ipad to a kodak hero 5.1 printer which is not an airprinter?

    can i print from my ipad to a kodak hero 5.1 printer which is not an airprinter?

    If the printer has WiFi, Kodak has an app in the iTunes Store that allows printing to at least some of their WiFi-equipped printers. Third-party printing apps such as PrintCentral are also available. All such apps have limitations, so check them out thoroughly before you pay for any such app.
    For other printers, you can route the printing through your computer. If you have a Mac, Printopia would be worth a look. Fingerprint is another option that is available for both Mac OS X and Windows system. You could also consider an AirPrint-capable print server. Lantronix makes a couple of models, including one that supports a USB printer:
    http://www.lantronix.com/it-management/xprintserver/xprintserver-t2.html
    By the way, you originally posted in the forum for asking questions about the Communities themselves. There are forums specifically for Apple products, including the iPad, and normally you'll get the quickest and most applicable responses if you post there.
    Regards.

  • Why can't I print from my ipad 2 on my epson workforce 840 printer??? it show that there isn't a printer on my Ipad and my printer is wireless .

    why can't I print from my ipad 2 on my epson workforce 840 printer  ??? it show that there isn't a printer on my Ipad and my printer is wireless.

    The 840 isn't supported by Airprint.  See the list here:
    http://support.apple.com/kb/ht4356
    You may be able to use a universal printing app (check the app store), or Epson may make an app.  Or you could get a more up-to-date printer.

  • How can I print from my ipad air without buying a new "air print" compatable printer?

    How can I print from my ipad air without buying a new "air print" compatable printer? I currently have a HP Photosmart plus B210. Can I make that work?

    Although you have posted in a Mavericks forum, implying that you have a Mac computer, your profile doesn't say that you have one. Printer Pro requires the printer to be connected to a Mac.

Maybe you are looking for

  • Bad Quality Macbook !

    I've had my Macbook since August 2006, and it's "falling Apart". The DVD/CD drive isn't working anymore, the screen is flickering, and plastic is peeling off the very bottom of the computer along the edge ! It's already had a logic board replaced und

  • Apple Bluetooth alu keyboard

    Hi, I don't understand why, my Alu bt keyboard, from Apple, shows me the batter ay 76% even though they are completely charged and new (tried different batteries). Any suggestion?

  • HT3500 How do I know if my epson printer is on a wifi network

    My epson printer goes off line some times when I print from my ipad

  • Inserts and locking

    We have like 10 sessions trying to insert into a same table and we are experiencing heavy enq:TX waits (enq: TX - row lock contention). What I don't understand is why does the INSERTS have to wait for TX locks. Can some one please clarify or provide

  • EM error

    Hi, whem I m trying to disable my cache, it s giving the bellow Error Activate Changes - Failed. Commit failed with 1 errors and 3 warnings. Problems reported by: bi_server1, SCLEDOBI03:bi_server1. See detailed logs for more information. This operati