After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Similar Messages

  • Updating vs. Deleting Folder files with the same name

    Hello all,
    Bear with me as I try to explain this.
    First off, I'm a long time Windows user who just happily converted to Mac. I'm loving my mac so far, but I've run into a snag that I hope to get clarification on.
    Let me set up a scenario on how this works with Windows.
    Let's say I have two folders/root directories labeled as today's date "20100729" with image files in them. Each folder has different picture file names. In other words, the files in each of folders are different. The only thing that is the same is the Folder/Directory name, which in this case is "20100729".
    So, in a windows environment let's say that each of these folders (with the same name) are located on 2 hard drives (A & B). If I take the folder from drive "A" and drop it in drive "B", windows seamlessly combines the files from both folders into one.
    On the flip side, when doing the same thing on my Mac, the entire folder contents from drive B gets replaced from drive A, even though the file names are all different. Which is very annoying.
    If you understand what I'm saying and know of a way for this to work the "Windows" way please let me know.
    Thanks in advance for your help. Let me know if you need further clarification.
    Cheers,
    - Jeff

    Use the ditto command in the Terminal, which is in the /Applications/Utilities/ folder; for instructions on its use, enter 'man ditto' without the quote marks into the Terminal prompt.
    (53065)

  • After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

    Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
    Also make sure that you are selecting built in speakers for your audio output.
    If that does not fix it try doing a Pram reset.
    Shut your mac down.
    Press the startup button.
    Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

  • After installing latest update the contact photos don't show on incoming call

    After installing latest update the contact photos don't show on incoming call

    Possible iTunes issue:
    Try the following after adding photos.
    Go to file
    Then Home Sharing
    Select photos to share
    Click on All Photos already selected Do anyway
    When Apply turns black click on Apply
    Now go to Apple TV to see if photos there
    Or restart iTunes.
    Works for me every time photos do not appear on my Apple TV 3
    Hopefully will work for you.

  • HT201412 None of my apps works after installing latest update.

    After installing latest update on my iPad 2, none of my apps work.  I click on the app, it flicks and goes back to home screen. Powering iPad off and restarting it did not work.  Please help.

    Did you update the apps? Check app store. Most of them had updates to support the iOS 5.1.1. It's been out a while

  • I notice that in the new update to Firefox if I have two bookmark folders with the same name Firefox will end up deleting one of them.

    Both of these problems with the bookmarks started occurring after I installed the latest update to Firefox.
    I frequently have bookmark folders of the same name under the older version of Firefox and it has never been a problem before. It is now, and I notice that after I've created two folders with the same name Firefox will end up deleting one of the folders, almost always the older of the two folders (the one created first, chronologically).
    I have also noticed that with the new update Firefox will occasionally fail to open all bookmarks in Tabs if I've asked it to do so. I can simply close Firefox and reopen the program and it will work again, but I don't know why this bug is occuring in the first place.

    You are using two IP address ranges.. which results in the printer being cut off from the other network..
    Why do you have two networks?? It is always better in home situations to run one network.
    If you have work setup with an enterprise level router you can setup routes between the two networks.. this is not possible on domestic level apple routers.

  • After upgrading my 3gs to ios5, I get 2 copies of pictures synced from my computer, 1 in the Photo Library and another in a library with the same name as the folder I put the pictures in to put on the phone. Any ideas why?

       When syncing pictures from my computer to my I-Phone I get 2 copies of the pictures, 1 in the Photo Library and another in a library with the same name as the folder I put pictures in to put on the phone. This started after I upgraded to ios5. I have tried re-installing I-Tunes. I have not reset the phone. My main concern is the amount of memory pictures take up on the phone. It's not a problem now but could be in the future. Any Ideas on why this happening?

    It has always been this way.  it was never different.  This is how the iphone handles photos - always has.
    There are NOT two copies,  There are simply two ways to access the very same photos.  All synced photos will ALWAYS be under Photo Library ( you can look at all photos at once this way or do a slideshow of all photos).  Those very same photos can also be accessed from the individual folders so you can show or slideshow just that folder.
    Just as a book can be in the library and in the fiction section, there is only one book/photo.

  • A  project on iMovie 09 that  Freezes(only the project)  the viwer window blocked in gray ... .. After editing that  took me a year I'm stuck . All my finished projects that are in the Library infected with the same symptoms and it happens only after I w

    a  project on iMovie 09 that  Freezes(only the project)  the viwer window blocked in gray ... .. After editing that  took me a year I'm stuck .
    All my finished projects that are in the Library infected with the same symptoms and it happens only after I went into the problematic project.  
    I tried to open a new project and everything works
    ...I also tried throwing Recent Files, in the past It solved the problem ,not this time ...
    the problem is that this project will take me a long, long time to rebuild
    imovie 09
    Model Name:          iMac 
      Model Identifier:          iMac10,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          3.06 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          4 GB
      Bus Speed:          1.07 GHz

    This recently happened to me.  I am a novice, but it seemed like that project got corrupted some how.
    I deleted it.
    Went to time machine and picked it up again when I knew it was working ok.
    I lost a few hours of work, but not the entire project.
    Once I had the project back from time machine, it worked fine (but like I said, I lost a little bit of work).

  • HT5012 Can I install two root certificates with the same name in iPad?

    Can I install two root certificates with the same name in iPad?

    Antaeus00 wrote:
    I tried sending a request for help,
    But did you succeeed in sending a request for help?
    Did you receive a response? How long has it been since you sent a request?
    but I need someone with more authority to talk to.
    There is no one with more authority than iTunes store support. We herem are only users.

  • One particular plug-in that I am trying to install reports 'an engine with the same name already exists.' However I cannot find it, even using the troubleshooting routines

    Hi,
    I am trying to install a add-on that will enable Google to behave as if I am in the USA. When I try to install the add-on I get a message which says 'An engine with the same name already exists'. However, I can find no evidence of the add-on and I have been through the various troubleshooting routines. Anybody know of a way around this?
    I have looked at the list of installed plugins and cannot see it. So whty does does FireFox think it's there?

    Hey oks10,
    It sounds like the Bing plugin might have been corrupted. I would bet that it's still installed, but not working. Try removing it from the \searchplugins\ folder in your [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile profile folder].
    I'd close and restart everything after you are done, then try installing it again.

  • How do you force instances with the same name on the same layer to update?

    Maybe someone can tell me why flash doesn’t redraw
    components’ x,y positions if they have the same instance name
    and are on adjacent frames? (movieclips work fine, just not
    components) If I have a button on frame 1 and a button on frame 2
    both with the same instance name but different locations on the
    stage, frame 2’s button doesn’t show up in the position
    I placed it, it stays at the position of frame 1 but still has the
    properties of frame 2’s button. The label changes and
    everything. If I stick a button on a frame in between and give it a
    different instance name there is no problem. I thought it might be
    the style manager bug
    http://www.gskinner.com/blog/archives/2007/12/cs3_component_b.html
    but it didn’t seem to affect. This happens for textareas too
    and probably all components although I haven’t tried them.
    I’ve tried using drawNow() and validateNow() with no luck
    either
    http://www.adobe.com/devnet/flash/articles/creating_as3_components_pt3_05.html
    Thank you!
    // put this on frame 1 along with a button on the stage with
    instance name: b
    function doit(event) {
    if (currentFrame == 1)
    gotoAndStop(2);
    else
    gotoAndStop(1);
    b.addEventListener(MouseEvent.CLICK, doit);
    stop();
    // put another button on frame 2 along with this code and
    also make it’s instance name: b but move it so it’s not
    in the same x,y coordinates as the button on frame 1
    stop();
    Something possibly related. I have a movieclip on a layer,
    one instance with name “a” on frame 1 and one instance
    with name “a” on frame 2 and it has event listeners
    inside it that update something on the movieclip. Unless I put the
    movieclips on separate layers the event listeners won’t reset
    each frame. (example: a button with a tooltip onmouseover that you
    want to change the text of from frame 1 to frame 2) You’d
    think if they were on separate keyframes at least but no, they need
    to be on separate layers too.
    I want the movieclip to update each frame. Any ideas?

    instances (whether components or not) with the same name may
    or may not be the same instance. it depends upon how they were
    created.
    for example, if you create an instance on frame 1 of your
    main timeline, give it an instance name and then create a keyframe
    on frame 2, the two instances will be the same.
    but if you create an instance on frame 1 of your main
    timeline, give it an instance name and then create a blank keyframe
    on frame2 and create another, what you think is a duplicate,
    instance and give it the same name, it will be a different
    instance.

  • Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

    each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
    I can't search for anything. HELP!!!
    Thanks
    Tom

    That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
    You can check for problems with preferences.<br />
    Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
    *http://kb.mozillazine.org/Preferences_not_saved
    *http://kb.mozillazine.org/Resetting_preferences
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Can I use two separate computers with the same adobe ID.  I want to update my kobo from either unit

    Can I use two separate computers with the same adobe ID.  I want to update my kobo from either unit

    I doubt it is possible to run two instances of iTunes on the computer at the same time.  To do so would require two users to be signed in and running iTunes under each user.
    The better solution would be to either clean up and merge the two libraries or have iTunes running on a second computer.

  • Error message after installing latest update

    Since installing latest update 11.0.2.26, I am receiving error message:   An unknown error occurred (-42110)
    Itunes does work, however, when I close this message down.
    Can anything be done?  What does it mean?  Am I better off just holding out until the next update and hope it fixes itself?

    Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
    iTunes: Advanced iTunes Store troubleshooting

  • Saving Issues after installing latest update

    Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?

    Hi JasBell,
    Which server are you trying to save to?
    What happens if you copy the document to the local computer first and then copy to the server?
    Regards,
    Rave

Maybe you are looking for