After installing Mountain Lion two drives on my network cannot be accessed. I am using Parallels to utilize QuickBooks ERP. The programs and data are on the drives that I can no longer access. Suggestions?
After installing Mountain Lion on my Mac Book Pro, I can no longer access two shared drives. Diagostics cannot solve the problem. I am using Parallels to run Qucikbooks ERP on these shared drives. How do I get my Mac to see these drives and access them?
Don't know what to tell you, but I also have an AEBS-Gen5 with a MBP Retina and Mac Mini using WiFi. Both are running Mountain Lion and I don't have any WiFi connection issues. Two iPhones in the household use WiFi with no issues along with a printer and 2 Windows 7 laptops.
First thing I would try is to shutdown all computers connected to the AEBS. Then power off the AEBS and finally the cable/DSL modem. Then reverse the order and power on the cable modem, wait for all the lights to be solid, power on the AEBS, wait for the light to show solid green; then power up a computer that uses WiFi.
If the above doesn't work, you might try repairing permissions via Disk Utility. If that doesn't help maybe a PRAM reset would work.
Similar Messages
-
After installing Mountain Lion doesn't external hard drives mount or stay mounted.
I have tried resetting my Mac's PRAM but the problem still remains.
Even USB memory sticks are unmounted efter a few seconds.
Anybody else with this major problem?I have the same problem, although mine has not been solved by ESET update, finder settings, PRAM & SMC resets or anything else.
Don't get it, my external hard drive still works on both my housemates computers - one macbook pro (with snow leopard) and one dell, just not on mine with mountain lion.
Any ideas for me guys? -
Microsoft Word Intermittently Crashing After Installing Mountain Lion
After installing Mountain Lion (10.8), Microsoft Word 2011 (v 14.2.3, currently the latest update) is intermittently crashing. This is not the error I have seen reported elsewhere where Word crashses on start up. Rather, it starts fine, runs for a while, then suddently freezes and gives an error message. Unfortunately I do not remember the full error message, but it stated something like "Microsoft Office cannot write to the hard drive..." I was prevously running Microsoft Office 2011 and had no problems until upgrading to Mountain Lion.
So far I tried repaired disk permissions, both via the disk utility application and by restarting while holding down the option key to boot into disk utility directly. This did not solve the problem.
I also checked the activity monitor, because after crashing the computer starts running very hot. The activity monitor shows a process called "mtmd", which is using 50-80% of the CPU. This activity seems to persist until the computer is restarted again.
I also checked fonts in Font Book, but there appear to be no duplicate fonts, which I thought might cause a problem in Word.
Any suggestions would be greatly appreciated.Hi there,
I've been getting the same error message for teh last few days. Word and Mountain Lion seemed to be playing well together until the last MS update (now running Word 2011 14.2.3). Fans go into overdrive and always a reboot required. Additionally, my DOCX is gone from where it was saved and in place only a word.tmp file remains. Sometimes I can open the temp file and recover all of the data but sometimes not. Luckily Time Machine has saved me on both occasions when the tmp file wouldn't open.
Excel and Powerpoint are currently running very smoothly (in fact I dare say better than previously).
I've tried running the DOCX from local drives and two external drives all with the identical results. However, after this occurring for the nth time I noticed that it seems to occur when Time Machine kicks in. I'm presently testing it with Time Machine turned off and all seems ok. Though it does kind of defeat the purpose! -
after installing mountain lion I lost pictures in iphoto, lost my musisc in itunes, my icluod is not working, internet its very slow and some other issues. There is a way how to fix these issues
Open System Preferences > iCloud
Deselect the box next to Photo Stream then reselect it.
Now for your music. Launch iTunes. From the iTunes menu bar top of your screen click iTunes > Preferences then select the Store tab.
Select: Music. (and Apps and Books) if you want.
Click OK.
iCloud syncs via your Wi-Fi network so give it a minute or two to reset your photos and music.
Slow internet ... try turning off the modem for a few minutes, then turn it back on. -
My macbook pro is very slow after installing mountain lion
my macbook pro is very slow after installing mountain lion? Is anyone else having this issue?
If you don't use an SSD and bump your RAM up to 8 Gb's you may experience slow speeds, but I noticed slow speeds with your general configuration in SL.
one thing you should consider right now is, Spotlight is Reindexing your hard drive, that takes time and resources, (resources which you don't necessarily have to spare).
If you continue feeling like your performance is slow, you have a few options with this computer (I have the same one).
the express card slot can house a wintec SSD drive. That little door on the side of your machine is pure gold for a really quick solution for speeding up your machine. I have one in mine right now i'm using as a scratch disk for CS6 but I used to boot from it, and the speed boost was out of this world.
You could take out the internal HDD and put in a new SSD (I have a Vertex 4 from OCZ) it is completely over kill but my experience is pretty fast and I keep up with the later MBP models colleagues have.
There are some other options for you like taking out the optical drive (however I don't know if I'm supposed to talk about that here). Google Data Doubler.
You need to also set it to always use the 9600 chipset, this will increase performance a lot too. to do this go to system preferences>energy saver>Better Performance. This switches the video card to the better one and makes a world of difference.
Lastly, your RAM. after an EFI Firmware update, our computer support up to 8GBs of RAM. Do it!
Late 08 MBP 2.53 GHZ 9600 chipset 8gb ram, Vertex 4 SSD -
HT1338 After install mountain lion my superdrive do not work
i facing problem after install mountain lion 10.8.2. my superdrive do not work properly , when i insert a disk to superdrive after 20-30 seconds left cd eject. if you have any solution about solve this problem , pls tell me.
After recently upgrading my mid-2010 Mac Mini from Lion to Mountain Lion 10.8.2 my superdrive stopped working. I did a clean install of Lion to a blank SSD. Then I upgraded to Mountain Lion from the App Store. Then I tried reading a Windows 7 installation DVD. Any DVD I insert in the internal superdrive is not recognized by the system and is ejected after a few seconds.
I tried cleaning the superdrive with a DVD lens cleaner. This did not fix the problem.
I tried a SMC reset. This did not fix the problem.
I tried an NVRAM/PRAM reset. This did not fix the problem.
I read on a related thread...
https://discussions.apple.com/thread/4150905?start=30&tstart=0
...that many Mountain Lion users have experienced the same issue.
I opened the Console to look for new messages appearing after inserting a DVD-ROM into the superdrive. No messages appeared while the superdrive whirred a few times and then ejected the DVD-ROM.
Apple have been made aware of the issue but no patch has been issued. Mountain Lion 10.8.2 is the current version with no updates available at the time of writing.
Some users with dual-boot systems have booted into Windows and their superdrive works fine. This points to a software issue with Mountain Lion. The problem appears to affect some systems and not others.
Other users have reported that their superdrive works again after downgrading to Lion or Snow Leopard.
I'm going to try booting ML into Safe Mode to see if the superdrive works. I'll then try downgrading to Lion or Snow Leopard to see if the superdrive works ok. That at least will confirm that it is a Mountain Lion upgrade related issue and not a superdrive hardware failure.
Then we will have to wait for a patch from Apple to resolve the issue so we can upgrade to ML without losing use of the optical drive! -
HT1338 Why is my MacBook Pro running so slow after installing Mountain Lion 10.8.
Why is my MacBook Pro running so slow after installing Mountain Lion 10.8. I have restarted, created more free space on my hard drive and run disk utilities. Simple operations result 20 seconds or more of the spinning wheel. Some are so slow that the operation does not happen at all. Itunes music cuts out during operations.
Check out this article by Thomas Reed for help http://www.reedcorner.net/understanding-upgrade-nightmares/. Also, make sure all apps are compatible with Mountain Lion using www.roaringapps.com. Do you have any antivirus installed? Make sure all apps are updated as well.
-
After installing Mountain Lion, I tried to scan from my Canon MX870 and received the message: "MP Navigator EX quit unexpectedly. Click Reopen to open the application again. A report will be sent to Apple," This problem happened right after I installed Mountain Lion. I then downloaded Canon's upgraded software and drivers for the MX 870 and the problem was resolved. Now one month later, the problem has returned.
rjliii wrote:
Solved problem with original Canon software. When I downloaded Canon software upgraded for OS X 10.8, I got all by Navigator Ex. Noticed that on Canon's site, the upgraded version is 3.1; my app was 2.1. Upgraded to 3.1 for Nav. Ex, and it works.
You should still use Image Capture IMHO. If it was my gear, that's what I would do. No need to worry about software upgrades. -
After installing Mountain Lion, iMessages and Facetime does not work. When I try to sign-in I get a message that says: The server encountered an error processing registration. Please try again later. After 4 calls to apple and 8 and a half hours on the phone. The apple people does not how to solve the problem. The last thing they told me is that they will send the problem to their engineers and I will hear from them. unfortunately they have not contact me.
During the phone calls I tried putting the date and time in automatic, changing the username and password, I even tried using somebody elses username and password. Please help, facetime is my tool to telecomute, and it is hurting my job.I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272 -
Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
Looking forward to hearing from somebody with a littlemore expertise than me, Chrisyou can remove preferences files by navigating to the Preferences folder for your user as follows:
0) Quit ALL iWork apps (Keynote, Pages and Numbers)
1) from the Finder select the menu item "Go > Go To Folder…". This will bring up a dialog:
2) enter the path "~/Library/Preferences" (no double quotes)
3) find the files:
com.apple.iWork.Keynote.plist
com.apple.iWork.Numbers.plist
com.apple.iWork.Pages.plist
and move these to the trash. I would NOT empty until later.
4) restart Numbers -
Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh. -
Can No Longer Get Camera Photos After Installing Mountain Lion
After installing Mountain Lion, I am no longer am able to see pictures from my digital camera thru the USB port. This camera has worked for years with my iMac, but not anymore. Anybody else having this issue after installing the newest system?
DickPaul_31:
I have not tried to import the photos directly into iPhoto. However, I did remove the SD card from the camera and plug it into a USB card reader, and my iMac would NOT read the photos that way either. I took the camera and plugged it into my Win. 7 laptop and the pictures showed up nicely, so I know the camera and the card are Ok. My iMac has been working strangely since I installed Mountain Lion. I'm getting lockups using iMovie too.
Dick -
After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA
Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem. -
After installing Mountain Lion, why is there Yahoo access for one user but not another?--both are administrators.
We've had several instances where we have had to run chkdsk on arrays with over 1m files. Average completion time is approximately 72 hours. The maximum downtime window they have available is the 64 hour weekend window. File sizes and number of files were
much smaller then than they are now.
The idea, in theory, was to use VHDs to compartmentalize the data into smaller volumes which could be more easily managed. It would also improve performance when transferring these compartments of data as they would use sequential read/write rather than
fragmented/random. This idea was never fleshed out in entirety, they don't split data up into little containers, but simply into big ones per project. Hence the 11m files in one container that I am currently trying to diagnose.
Some other important facts: The VHD in question is mounted in B:/project/ as this server also allows remote workers to log in, but they are restricted to see only data in E:. Disks A-D are hidden via group policy.
Update: icacls is failing on a large number of files within this dataset. I counted the path characters to ensure it wasn't the 255 character limit I was encountering and verified that the paths being blocked are only about 150 characters long. Once it finishes,
I'll have to try taking ownership and then re-running it. At this point I still have no idea how long to expect. I'm running out of time as the environment will be in use again at 9AM tomorrow morning. -
No video after installing Mountain Lion
I have downloaded and installed Mountain Lion on my Mac Pro. After the install and restart, my Mac Pro restarts however, I do not get a signal sent to my monitor. I have attached different monitors and connected to both DVI ports with no luck.
I just wanted to add to the conversation that this was EXACTLY what happened to me after installing Mountain Lion. All my contacts were gone. It showed the Groups on the side of the address book after one day but the contacts never showed up. I tried unchecking the box for the contacts in system preferences for the iCloud and then rechecking it again. That didn't help either. Came across this remedy up above about taking the Address Book from the Application Support Folder and putting it in the trash. Viola! It worked. However, I would add that I had to go into the iCloud pane and check the address book box since it then became unchecked. Once I did that, they ALL loaded back up and now they are finally there.
Maybe you are looking for
-
Exception -arrayindexoutobound while inserting checkbox in a jtable
hello, i am using oracle as backend. As you might be knowing that oracle doesn't store boolean datatype. so now please tell me how to insert checkbox in a jtable. please do help me if you can.
-
Chapter numbering - how to get rid of it
Is there an easy way to suppress the chapter numbering of imported topics? I cannot imagine that the majority of help authors want topics that are imported from Word documents to maintain the chapter numbers. I noticed these numbers are always includ
-
hi, in the past few days i have a problem with my samsung lcd TV, in every channel i get a wierd black, it only happens with black/dark colors and not with green, red etc. i tried connecting diffrent input devices that worked on other TV and it seems
-
Odd (semi-transparent or so) screen problem
Hi, I have an odd problem with my T61 (model: 7664, type: 19G, OS: Windows XP SP2). Every now and then after booting up my PC I get an really odd looking screen: it is as if transparent (double view would be more correct because the layer I'm seeing
-
Ok so I recently got an iPhone 4s and I'm having trouble with the group messaging system. On my old phone (HTC 7 Pro, windows phone) I would keep getting individual messages from people in a group text that I have been added in. The only difference i