After installing the last version of iTunes, it failed to lunch and gave me 2 Error messages with Error 7 title , rebeat installation several times with the same Error message, what shall I do?
Once I finish upgrading iTunes on my Windows PC, I had an Error as t shown on the image below which doesn't allow the iTunes App to lunch.
Please advise what shall I do ?
Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
Cannot play songs after updating the last version of iTunes
Did anybody else got the same problem?, not being able to play dowloads on your PC after updating the last version of iTunes 11.1.5.5?
Hello gtaborga,
The following article provides troubleshooting steps that can help get iTunes to play your music once more.
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Cheers,
Allen -
Why i can't instal the last version of itunes in my pc???
why i can't instal the last version of itunes in my pc???
How could we possibly know or begin to offer solutions based on that complete lack of detail?
What happens when you try? -
I can't download the last version of Itunes in my PC... please help me
I'm not able to do the dawnload of the last version of Itunes in my PC. The dawnloading starts but after few second all is tourn off. Why?
CAn i do the dawnload in another way?How could we possibly know or begin to offer solutions based on that complete lack of detail?
What happens when you try? -
I Am not able to download the last version of iTunes.. Can you help please?
I Am not able to download the last version of iTunes.. Can you help please?
Hello,
I recommend you download it from the Apple Website: www.apple.com/itunes
Thank you for using Apple Support Communities.
All the best,
James -
Where's the menu in the last version of Itunes?
I don't find where is the menu in the last version of Itunes. Is someone can help Please?
It is hidden by default. To reveal it, hold the CTRL key and then press B.
-
my Ipod's version is 4.2.1 but i cant update it to IOS5 .. i have tried many ways to do it it just doesnt update.. and i have the last version of itunes ... plz helpp!!!!!!
To identify ur iPod:
http://support.apple.com/kb/HT1353#iPod_touch_late2009
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I am unable to upload the latest version of iTunes. It worked before and when prompted uploaded the newest version. Now I'm unable to access iTunes..."Error 7 Windows Error126. Insufficient privileges". What do I do?
Hey thomashfrompa,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
When I start iTunes, how do I get rid of the message "To use this machine for downloads, enter you Apple ID and password" which I now see twice since I downloaded the latest version of iTunes. Once is enough and no checkbox exists to say "do not show this message....."
Does this apply?
If you're asked for the password to your previous Apple ID when signing out of iCloud - Apple Support -
I have recently updated to iPhoto 9.2.1, more by accident I guess. In the older version of iPhoto when I imported photos and gave the event his own name (for exampample "110723 birthday son 2011"), this name was also used in the "masterfile", so I could find the file by his name ("110723 birthday son 2011") in the "masterfile" on my HD and copy and paste it from there to other computers.
In the new version the file gets stored under a seemingly random number, which does not give me any information about the content.
Is there a way to fix this? Would it be different in apperture?
Thanks
HaraldI have Iphoto '09, version 8.1.2 (424). I am having an identical problem. All my pictures are imported into Iphoto when I downloaded them from my camera. Until recently, I thought that the pictures were actually saved in the library. Since I need to crop my pictures for the web, and Iphoto doesn't do that, I purchased Photoshop Elements to do that. To my surprise, when I try to get a picture from Iphoto to Photoshop, it can't be done. That was when I realized, after wasting a lot of time, that the photos are not in the Iphoto library.
I started naming the pictures on Iphoto so I had a recognizable file name to open on Photoshop. Couldn't find it. I looked in the Backup folder and the Transfer software folder (I have a Nikon camera), and the names I entered in the Iphoto display, could not be found.
When I am trying to upload a photo to the web, I get the Finder folder showing with an active folder called "Photos" under "Media", which only displays Iphoto and PhotoBooth. This is a folder name that I cannot find in my HD anywhere when I look for it. If I edit a picture with Photoshop, I am not going to save it back to Iphoto (not sure whether it will work properly). How do I get my folder of edited photos to show when I want to upload a picture to the web?
Where (the name of the folder) do I find the pictures I see displayed on the Iphoto library, including any name changes, keywords added, and so on? -
After installing the lates version of itunes on my Sony Vio, a bubble pops up which says:
iTunes installation complete, ERROR occured during installation before iTunes could be configured. Your system has not been modified. To complete the installation process, run the installation again.
I did this, but this bubble keeps appearing. What do I need to do?Hello there, glenkram.
The following article outlines great steps to try for troubleshooting your very issue:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Unable to install the last version of itunes
i've just downloaded the latest version of itunes but i couldn't install it. at the end of the instalation it's been said that some errors Occurred and the window was closed. what can i do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Then... See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery... -
Problem with the last version of itunes for win 7 64 bit.
hello, yesterday i have installed the latest version of itunes 64 bit and now it doesn't works. I have unistalled and reinstall software but after the first run it doesn't works anymore. It's remain stopped and waitind i don't know why. I need to kill it.
Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!
-
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Loading Nested table with SQL Loader
We have 15 nested tables in an table. Need help in creating a contol file. Tried with the syntax of object collection and didn't work. Can any none share the syntax please. -- Thanks, Phani Adusumilli
-
Upgrade to Windows 8.1 Pro Update 1 and it killed all my 3rd party drivers
Hoping someone can help - my PC upgraded Windows 8.1 Pro (fresh install a few months ago) with the 'Update 1 patch' which was made available a few days ago. It was done via Windows Update - I let it do its thing for about 15 minutes, restart etc. On
-
I can not get my browser email to open up. It is through mediacom and they say they do not support firefox yet it always worked till today after I cleared all my history earlier today. I have tried to do the steps it says but no way to add my correct
-
Someone knows about an example on splitting a message into several messages (multiline element), the target message type is of one type.
-
how to implement content assisatant (ctrl+space) in JavaFx textArea?