After last update, flash won't run, camera won't work, slow slow slow!

After the recent update, my camera won't work, can't do facetime or video in ichat.  Also shockwave and silverlight plug ins won't work so can't watch youtube or netflix.  On reboot my laptop is EXTREMELY Slow!
help?

Hi hadleyoil, and a warm welcome to the forums!
Thanks for the report(s).
That is generally the best cure, just be sure to Repair Permissions before & after any update!
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions before & after re-install, then reboot again each time.

Similar Messages

  • Speakers won't work after last update. When headphones are plugged in, they work. Help!!

    NO ringtones work after the update. It only vibrates. What should I do?

    Check the mute switch along the edge, near the external volume controls.

  • After last update computer won't start

    on febuary 20th I downloaded the newest system updates for leopard, after getting them downloaded I restarted my computer and haven't got it up and running since.
    after restarting the first time it went to the grey apple logo screen with the progress circle at the bottom and ticked away for a few hours, then it flashed over to a blue screen. Since that time every time I've tried starting my computer it has had the same problem.
    I can't boot into safemode, I get no warnings, just a grey screen that eventually goes to a blue screen, in the blue screen I get my mouse arrow that I can move but nothing else.
    I've talked to some of the IT guys where I work, but have had no luck, and I've tried the reset the PRAM, and it still can't boot in any mode, and no other discussion seems to have a solution that I've found. Its now going on a month and I have work I need to get done and have had to resort to the use of my old ragidy peice of crap (PC) which is like trying to do brain surgery with a plastic spoon
    any and all help is appreciated
    thanks
    Joe Jones

    please do not duplicate posts. It gets very confusing.
    I responded to the other post which has been deleted.
    Message was edited by: nerowolfe

  • After installing updates, Firefox won't work. I got the message /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager Error: Platform version '1.9.2.4' is not compatible with minVersion = 1.9.2.6 maxVersion /Applications/Firefox.app/Conten

    I cannot access download.mozilla.org. I need to do a fresh install after something went wrong with my updates and now Firefox won't even open so I am using Safari. I don't know why I can't get download.mozilla.org: is it because I am in China and it's now been blocked or is there a problem with the website?
    == I downloaded the updates. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-us) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.<br />
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.<br />
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Camera blurry after last update how to fix?

    Blurry camera after last update on I pad.  How to fix?

    Hello Littlebit5,
    Thank you for the details of the issue you are experiencing with the camera on your iPad.  I recommend following steps 3-8 below for the issue you described  (these steps refer to an iPhone, but these steps are applicable to an iPad as well):
    Camera isn't functioning
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My iTunes won't open after last update.

    My iTunes won't open after last update. Can anybody help me?

    I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
    https://discussions.apple.com/thread/3800524
    Oliver

  • Flash CC doesn't start up after last update

    Flash CC doesn't start up after last update. It said "Training en zelfstudie" (Training and self-stufy in Dutch) for the update.
    Everything was working fine before the update, now if I try to start-up Flash solo,
    it says: "Flash werkt niet meer" (Flash has stopped working), and quits.
    As you can probably tell from the message, I'm on Windows 7.
    Now here is interesting info: if I double click a previous movie, then Flash starts up fine and loads the previous movie.
    However when I close it and the screen that should appear is the "new movie" dialog, flash hangs again.
    So obviously something went wrong installing the new update, or the update doesn't work properly.
    I'm now working with my pre-cc flash5.5 version, which I re-installed to avoid crashing flash every time I close a file.
    My questions:
    1- Where do I log this problem? (Or am I in the right place?)
    2- Can I re-install the previous version, which worked fine? (I can live without tutorials etc.)
    3- Can I try to re-install this version if the above is not possible and how do I go about doing that?

    What fixed the problem for me was just reinstalling Flash CC. I thought I'd give it a try, because I couldn't find a message of anyone experiencing the same problem.
    So I used the control panel to uninstall Flash, then I tried reinstalling.
    Creative Cloud kept saying Flash is up to date, so you can't reinstall. If you click on the gear and choose Exit and then restart Creative Cloud it will take a few seconds, but the it will see the situation as it is and you can reinstall Flash.
    After the reinstall the issue was gone.
    Thanks for the other solutions, I think this is a handy resource for rolling back Flash if I ever do need it
    and gives me more confidence in the creative cloud product.
    Maybe Adobe will pick it up and make it easier for us 'normal' creative-cloud users to
    pick which version we want. Like you can do in CVS systems.

  • Can't open Keynote files after last update. I created the files with Ipad 2, the same Ipad which won't open the files now. No Mac involved. What can I do to habe access again?

    Can't open my Keynote files after last update on Ipad 2. I created the files on the same Ipad. No Mac involved. What can I do to open and use the files again?

    Finally, this helped me:
    https://discussions.apple.com/message/23602871#23602871

  • T510 ThinkVanta​ge button and updates software broken after last update 12/1/2010

    After last updates I ran on Dec 1, 2010, the ThinkVantage button does nothing.  Running the updates and drivers from the control panel flashes the GUI splash screen then closes.
    Lenovo really screwed this one up!  Now you can't even get the updates to work to fix other issues.
    In the event logs I show PC-Doctor errors
    The description for Event ID 1 from source PC-Doctor cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    (1972) Asapi: (13:00:09:5300)(1972) DEFECT.LOCALIZATION - Error -- Missing String: scriptlets : button1 locale: PCDLocale: language = en, customer = lenovo, variant = ltt
    Log Name:      Application
    Source:        ThinkVantage Registry Monitor Service
    Date:          12/1/2010 12:29:40 PM
    Event ID:      0
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Computer:      jmw-77
    Description:
    The description for Event ID 0 from source ThinkVantage Registry Monitor Service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    Service started
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/ev​ent">
      <System>
        <Provider Name="ThinkVantage Registry Monitor Service" />
        <EventID Qualifiers="0">0</EventID>
        <Level>4</Level>
        <Task>0</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-12-01T17:29:40.000000000Z" />
        <EventRecordID>42737</EventRecordID>
        <Channel>Application</Channel>
        <Computer>jmw-77</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Service started</Data>
      </EventData>
    </Event>

    Hi and welcome to the forum!
    Try uninstalling the PC-Doctor / Lenovo ThinkVantage Toolbox and System Update from Add/Remove programs, do a mandatory restart, thereafter download and run CCleaner, scan for registry issues with it and fix them. Subsequently, manually install both Toolbox and System Update.
    Keep us posted with the results.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • ITunes no longer opening after last update.

    ITunes not opening after last update on my main user. Second user is fine however accesses different library.
    Computer freezes when attempting to open ITunes. Have also searched for the sync services file but is not located under reveal in folder or go to options.
    Apologies I am not the best tech savy person and have read other posts trying to solve the problem. Other posts asked for the following reports.
    Any assistance would be greatly appreciated - we are an apple household and this is effecting everything!
    Log List ITunes
    8/06/2014 2:39:28.757 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Spawned and waiting for the debugger to attach before continuing...
    8/06/2014 8:51:05.999 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[3827]) Exited: Terminated: 15
    8/06/2014 9:04:40.000 pm kernel[0]: hfs: mounted iTunes on device disk3s2
    8/06/2014 9:04:40.513 pm mds[40]: (Normal) Volume: volume:0x7fd43483dc00 ********** Bootstrapped Creating a default store:1 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/iTunes
    8/06/2014 9:06:34.278 pm sudo[3918]:     root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.yTVHam/Scripts/com.apple.pkg.iTunesX.tO4vG4 ; USER=mel ; COMMAND=./Tools/AlertAll.app/Contents/MacOS/AlertAll /
    8/06/2014 9:06:46.629 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunesHelper.27664[421]) Exited with code: 1
    8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
    8/06/2014 9:06:49.536 pm iTunesHelper[240]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
    8/06/2014 9:08:05.643 pm iTunesHelper[4058]: _SubscribeForMuxNotifications (thread 0x7fff7ef70310): USBMuxListenerCreate: Connection refused
    8/06/2014 9:11:05.077 pm com.apple.launchd.peruser.502[281]: (com.apple.iTunes.49488[4118]) Exited: Terminated: 15
    I was unable to find anything starting with iTunes under User Diagnostic Reports however located several starting with CFPREFSD, this was the latest one
    Process:         cfprefsd [4137]
    Path:            /usr/sbin/cfprefsd
    Identifier:      cfprefsd
    Version:         855.16
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [281]
    Responsible:     cfprefsd [4137]
    User ID:         502
    Date/Time:       2014-06-08 21:11:04.973 +1000
    OS Version:      Mac OS X 10.9.3 (13D65)
    Report Version:  11
    Crashed Thread:  2  Dispatch queue: com.apple.root.default-priority
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: 0x000000000000000a, 0x000000010e0c3000
    VM Regions Near 0x10e0c3000:
        Dispatch continuations 000000010d800000-000000010e000000 [ 8192K] rw-/rwx SM=PRV 
    --> mapped file            000000010e083000-000000010e1be000 [ 1260K] r--/rwx SM=COW  /Users/USER/Library/Preferences/*/*.plist
        MALLOC_LARGE           000000010e1be000-000000010e2f9000 [ 1260K] rw-/rwx SM=PRV 
    Thread 0:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib                  0x00007fff8f0bc662 kevent64 + 10
    1   libdispatch.dylib                       0x00007fff963fc421 _dispatch_mgr_invoke + 239
    2   libdispatch.dylib                       0x00007fff963fc136 _dispatch_mgr_thread + 52
    Thread 1:: Dispatch queue: com.apple.root.default-overcommit-priority
    0   libsystem_kernel.dylib                  0x00007fff8f0bbcaa __sigsuspend_nocancel + 10
    1   libdispatch.dylib                       0x00007fff964047da _dispatch_sigsuspend + 21
    2   libdispatch.dylib                       0x00007fff964047c5 _dispatch_sig_thread + 45
    Thread 2 Crashed:: Dispatch queue: com.apple.root.default-priority
    0   libsystem_platform.dylib                0x00007fff982c80de _platform_memmove$VARIANT$Nehalem + 254
    1   libxpc.dylib                            0x00007fff907cf81e xpc_data_create + 82
    2   com.apple.CoreFoundation                0x00007fff90641386 -[CFPDSource acceptMessage:] + 806
    3   com.apple.CoreFoundation                0x00007fff90648d67 __handle_synchronize_message_block_invoke + 215
    4   com.apple.CoreFoundation                0x00007fff9063fc1a __90+[CFPDSource withSourceForDomain:forRemoteClient:inContainer:user:byHost:managed:perform:]_b lock_invoke_2 + 42
    5   libdispatch.dylib                       0x00007fff963fd1bb _dispatch_call_block_and_release + 12
    6   libdispatch.dylib                       0x00007fff963fa28d _dispatch_client_callout + 8
    7   libdispatch.dylib                       0x00007fff963fc082 _dispatch_root_queue_drain + 326
    8   libdispatch.dylib                       0x00007fff963fd177 _dispatch_worker_thread2 + 40
    9   libsystem_pthread.dylib                 0x00007fff998cfef8 _pthread_wqthread + 314
    10  libsystem_pthread.dylib                 0x00007fff998d2fb9 start_wqthread + 13
    Thread 2 crashed with X86 Thread State (64-bit):
      rax: 0x000000010e1be040  rbx: 0x00007f9bb24043d0  rcx: 0x0000000000000010  rdx: 0x00000000000fa5fc
      rdi: 0x000000010e1fe010  rsi: 0x000000010e0c2fd0  rbp: 0x000000010d7294b0  rsp: 0x000000010d7294b0
       r8: 0x0000000000000003   r9: 0xfffffffef1e41fff  r10: 0x00007f9bb2404210  r11: 0x000000000013b040
      r12: 0x000000010e1be000  r13: 0x00007f9bb2504b40  r14: 0x000000010e083000  r15: 0x000000000013a60c
      rip: 0x00007fff982c80de  rfl: 0x0000000000010202  cr2: 0x000000010e0c3000
    Logical CPU:     1
    Error Code:      0x00000004
    Trap Number:     14
    Binary Images:
           0x10d5d9000 -        0x10d5d9fff  cfprefsd (855.16) <4342939E-DB15-3A1A-BCDE-6B3EF244CAAB> /usr/sbin/cfprefsd
        0x7fff6eedc000 -     0x7fff6ef0f817  dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
        0x7fff8cc03000 -     0x7fff8cc2cff7  libc++abi.dylib (49.1) <21A807D3-6732-3455-B77F-743E9F916DF0> /usr/lib/libc++abi.dylib
        0x7fff8ee44000 -     0x7fff8ee4bfff  libcompiler_rt.dylib (35) <4CD916B2-1B17-362A-B403-EF24A1DAC141> /usr/lib/system/libcompiler_rt.dylib
        0x7fff8ef27000 -     0x7fff8ef2bff7  libcache.dylib (62) <BDC1E65B-72A1-3DA3-A57C-B23159CAAD0B> /usr/lib/system/libcache.dylib
        0x7fff8f0a1000 -     0x7fff8f0a5ff7  libsystem_stats.dylib (93.90.3) <4E51D5B0-92A0-3D0D-B90E-495A1ED3E391> /usr/lib/system/libsystem_stats.dylib
        0x7fff8f0a6000 -     0x7fff8f0c2ff7  libsystem_kernel.dylib (2422.100.13) <498AEBD7-4194-3CF2-AA16-D5D03FFBD8C0> /usr/lib/system/libsystem_kernel.dylib
        0x7fff8f626000 -     0x7fff8f637ff7  libsystem_asl.dylib (217.1.4) <655FB343-52CF-3E2F-B14D-BEBF5AAEF94D> /usr/lib/system/libsystem_asl.dylib
        0x7fff8f638000 -     0x7fff8f686fff  libcorecrypto.dylib (161.1) <F3973C28-14B6-3006-BB2B-00DD7F09ABC7> /usr/lib/system/libcorecrypto.dylib
        0x7fff8f879000 -     0x7fff8f894ff7  libsystem_malloc.dylib (23.10.1) <A695B4E4-38E9-332E-A772-29D31E3F1385> /usr/lib/system/libsystem_malloc.dylib
        0x7fff8fb06000 -     0x7fff8fb09ff7  libdyld.dylib (239.4) <7C9EC3B7-DDE3-33FF-953F-4067C743951D> /usr/lib/system/libdyld.dylib
        0x7fff8fb0a000 -     0x7fff8fb0bffb  libremovefile.dylib (33) <3543F917-928E-3DB2-A2F4-7AB73B4970EF> /usr/lib/system/libremovefile.dylib
        0x7fff8fb2e000 -     0x7fff8fb33ff7  libunwind.dylib (35.3) <78DCC358-2FC1-302E-B395-0155B47CB547> /usr/lib/system/libunwind.dylib
        0x7fff904b0000 -     0x7fff90695fff  com.apple.CoreFoundation (6.9 - 855.16) <A63E680E-E4B2-368B-8564-9DBE0D8DDB91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        0x7fff907cd000 -     0x7fff907f1fff  libxpc.dylib (300.90.2) <AB40CD57-F454-3FD4-B415-63B3C0D5C624> /usr/lib/system/libxpc.dylib
        0x7fff90e2c000 -     0x7fff90e2dff7  libDiagnosticMessagesClient.dylib (100) <4CDB0F7B-C0AF-3424-BC39-495696F0DB1E> /usr/lib/libDiagnosticMessagesClient.dylib
        0x7fff912c0000 -     0x7fff912c1ff7  libsystem_blocks.dylib (63) <FB856CD1-2AEA-3907-8E9B-1E54B6827F82> /usr/lib/system/libsystem_blocks.dylib
        0x7fff928cb000 -     0x7fff928d5fff  libcommonCrypto.dylib (60049) <8C4F0CA0-389C-3EDC-B155-E62DD2187E1D> /usr/lib/system/libcommonCrypto.dylib
        0x7fff9342b000 -     0x7fff9343cff7  libz.1.dylib (53) <42E0C8C6-CA38-3CA4-8619-D24ED5DD492E> /usr/lib/libz.1.dylib
        0x7fff935ac000 -     0x7fff935b3ff8  liblaunch.dylib (842.90.1) <38D1AB2C-A476-385F-8EA8-7AB604CA1F89> /usr/lib/system/liblaunch.dylib
        0x7fff94021000 -     0x7fff94048ffb  libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
        0x7fff94904000 -     0x7fff9490bff3  libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
        0x7fff94d40000 -     0x7fff94eedf27  libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
        0x7fff94eee000 -     0x7fff94ef3fff  libmacho.dylib (845) <1D2910DF-C036-3A82-A3FD-44FF73B5FF9B> /usr/lib/system/libmacho.dylib
        0x7fff94f28000 -     0x7fff94fb1ff7  libsystem_c.dylib (997.90.3) <6FD3A400-4BB2-3B95-B90C-BE6E9D0D78FA> /usr/lib/system/libsystem_c.dylib
        0x7fff9510d000 -     0x7fff9510dff7  libkeymgr.dylib (28) <3AA8D85D-CF00-3BD3-A5A0-E28E1A32A6D8> /usr/lib/system/libkeymgr.dylib
        0x7fff95121000 -     0x7fff95122fff  libunc.dylib (28) <62682455-1862-36FE-8A04-7A6B91256438> /usr/lib/system/libunc.dylib
        0x7fff9551f000 -     0x7fff95546ff7  libsystem_network.dylib (241.3) <8B1E1F1D-A5CC-3BAE-8B1E-ABC84337A364> /usr/lib/system/libsystem_network.dylib
        0x7fff957eb000 -     0x7fff959a3ffb  libicucore.A.dylib (511.32) <A7CE7DAD-D3AD-36A2-BE4F-25C5F21FADBB> /usr/lib/libicucore.A.dylib
        0x7fff95bf4000 -     0x7fff95bf6ff7  libquarantine.dylib (71) <7A1A2BCB-C03D-3A25-BFA4-3E569B2D2C38> /usr/lib/system/libquarantine.dylib
        0x7fff95c26000 -     0x7fff95c68ff7  libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
        0x7fff96057000 -     0x7fff9605ffff  libsystem_dnssd.dylib (522.90.2) <A0B7CF19-D9F2-33D4-8107-A62184C9066E> /usr/lib/system/libsystem_dnssd.dylib
        0x7fff963f9000 -     0x7fff96413fff  libdispatch.dylib (339.92.1) <C4E4A18D-3C3B-3C9C-8709-A4270D998DE7> /usr/lib/system/libdispatch.dylib
        0x7fff96414000 -     0x7fff9641dff3  libsystem_notify.dylib (121) <52571EC3-6894-37E4-946E-064B021ED44E> /usr/lib/system/libsystem_notify.dylib
        0x7fff96a20000 -     0x7fff96a21ff7  libSystem.B.dylib (1197.1.1) <E303F2F8-A8CF-3DF3-84B3-F2D0EE41CCF6> /usr/lib/libSystem.B.dylib
        0x7fff982c4000 -     0x7fff982caff7  libsystem_platform.dylib (24.90.1) <3C3D3DA8-32B9-3243-98EC-D89B9A1670B3> /usr/lib/system/libsystem_platform.dylib
        0x7fff99815000 -     0x7fff99867fff  libc++.1.dylib (120) <4F68DFC5-2077-39A8-A449-CAC5FDEE7BDE> /usr/lib/libc++.1.dylib
        0x7fff998cd000 -     0x7fff998d4ff7  libsystem_pthread.dylib (53.1.4) <AB498556-B555-310E-9041-F67EC9E00E2C> /usr/lib/system/libsystem_pthread.dylib
        0x7fff9996e000 -     0x7fff9996fff7  libsystem_sandbox.dylib (278.11) <B46E4040-A8C6-3EBC-91F8-F1CB01106614> /usr/lib/system/libsystem_sandbox.dylib
        0x7fff99c2c000 -     0x7fff99c5bfd2  libsystem_m.dylib (3047.16) <B7F0E2E4-2777-33FC-A787-D6430B630D54> /usr/lib/system/libsystem_m.dylib
        0x7fff9a11e000 -     0x7fff9a120ff3  libsystem_configuration.dylib (596.15) <4998CB6A-9D54-390A-9F57-5D1AC53C135C> /usr/lib/system/libsystem_configuration.dylib
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 6540
        thread_create: 0
        thread_set_state: 0
    VM Region Summary:
    ReadOnly portion of Libraries: Total=74.9M resident=13.6M(18%) swapped_out_or_unallocated=61.2M(82%)
    Writable regions: Total=45.8M written=480K(1%) resident=584K(1%) swapped_out=0K(0%) unallocated=45.2M(99%)
    REGION TYPE                      VIRTUAL
    ===========                      =======
    Dispatch continuations             8192K
    Kernel Alloc Once                     4K
    MALLOC                             28.4M
    MALLOC (admin)                       16K
    STACK GUARD                          12K
    Stack                              65.1M
    VM_ALLOCATE                          28K
    __DATA                             1080K
    __LINKEDIT                         66.2M
    __TEXT                             8872K
    __UNICODE                           544K
    mapped file                        1260K
    shared memory                         4K
    ===========                      =======
    TOTAL                             179.2M
    System Profile:
    Model: iMac12,2, BootROM IM121.0047.B1E, 4 processors, Intel Core i5, 3.1 GHz, 4 GB, SMC 1.72f2
    Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3230554638424353302D444A2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0-P2P
    Bluetooth: Version 4.2.4f1 13674, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5690H, 277.5 MB
    USB Device: Hub
    USB Device: 1861
    USB Device: Internal Memory Card Reader
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: iPhone
    USB Device: MFC-J6910DW
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    Thunderbolt Bus: iMac, Apple Inc., 25.1
    Also located,
    Diagnostic Messages
    Powerstats for:  iTunesHelper
      com.apple.iTunesHelper          11.2.2 (11.2.2)          <D9314C39-EAF4-37E6-B8D8-2731175CD7B2>          /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iT unesHelper
    Powerstats for:  iTunes

    ...now my computer updated it again. It opened, tried to collect information about the copyright, the an error message popped up saying that iTunes does not work correctly due to any mistake...
    Please help me!

  • No autofill after last update

    My Ipod no longer appears in the list when plugged into my computer. As a result the autofill button is gone and I cant update songs to my 1st generation Ipod shuffle. This came about after last update. It's as if the system doesn't recognize my Ipod although I continue to get the message that the Ipod is syncing and the system signals me when the syncing is complete.
    My main concern is how do I go about autofilling now?

    I said to click on the button NEXT TO (to the right of) the Settings button, which should say "On This iPod" in the current version of iTunes.  The Settings screen is what iTunes is currently showing so clicking on Settings again will not change the screen.
    In previous version of iTunes, you also clicked on the "tab" next to Settings to get a listing of the shuffle's contents, and the Autofill button.  It was just called something else instead of On This iPod (I think it was "Contents").  So the procedure itself has not changed in the current version of iTunes.
    I have a 1st gen shuffle, and that's how it works... 

  • Battery drain after last update (5.4.0.4165)

    After last update battery consumption went up to 40%, reinnstalled and it dropped to 26%. But that is still way too high. Especially since I barely use it on my phone..
    Sony
    Xperia Z3
    D6603
    Stock Android 5.0.2
    Mobile 3/4g and WiFi
    Skype v. 5.4.0.4165
    Attachments:
    Screenshot_2015-06-09-12-38-28.jpg ‏351 KB

    Hello, skypeisawfull-,
    Thanks for submitting feedback about the battery life of Skype for Android. The developers of the app are making great strides to improve the functionality and other aspects, including battery life, so that it runs better for its users!
    Skype, by nature, does use more battery than many other apps. It should be understood that it has to constantly contact Skype's servers in order to receive incoming call, chat and contact data. You can reduce the amount of battery usage by closing some other apps that you do not use, reducing screen use time, ensuring that you are in areas with good reception (because cell standby greatly reduces battery) and rebooting the phone after a day or two can make a difference in your battery life. 
    Remember that the development team has surely made it a priority to make the app consume less battery and kill off the bugs that cause that. They probably have more in store, so just you wait and see! Things could be looking good! With you posting this, they'll take notice and probably work to reduce that 26% usage to something lower in later updates!
    Thanks for the feedback - keep 'em coming!
    I.T. Professional
    Virtualisation Solutions (VCA-DCV - VMware)
    Donating time to help you here with your Skype needs.
    If I've answered your question, feel free to "Kudo" me!

  • HTML animation effects doesn't work after last update

    After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
    Various animated png in html project appears immediatly without shows transitions or deformations.
    I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
    I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
    A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
    The same animation made with Hedge produce more the 100MB folio.
    why new version of dps don't show my html anim correctly ? I hope adobe correct this proble. 

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • Hello, i really need help. I had just updated my iphone 3gs to 6.0.1, and after I updated, it won't activate.

    Hello, i really need help. I had just updated my iphone 3gs to i.o.s. 6.0.1, and after I updated, it won't activate.I tried it in itunes and it always says " We cannot activate your iphone at this time..." and when I activate using Wi-Fi, it says, "Your iPhone cannot be activated because the activation server is temporarily unavailable." I could swear that my Wi-Fi is fine, and my Itunes is on the latest version.  Is this a bad thing or does this normally occurs? Can I still fix this ? I'm so desperate to use my iphone cause I use it everyday for personal purposes. I sure would appreciate any tip or help . PLSSSS ! Thank you for that wonderful being that can help.

    Do not take it to a third party repair shop - downgrading causes problems and voids your warranty.
    I had to unlock it so that i could really use it as a phone.
    And that is the root of the problem. Unless you had your carrier unlock it, it was hacked and cannot be legitimately activated. Even if you don't care about warranty or problems, downgrading simply will not help an activation issue.

  • Error code msvcr80 after last update now itunes will not open

    Error code msvcr80 after last update now itunes will not open.  Reinstalled and still does not work

    Click here and follow the instructions. If they don't work, perform a complete reinstallation (Windows XP, Windows Vista and newer).
    (98968)

Maybe you are looking for

  • Bootcamp windows 7 listen to line in soundcard driver not installing

    Hi there and thanks for reading. Bottom line Bootcamped Windows 7 I just want to be able to HEAR my line in input in REALTIME not a 1-2sec delay like the "listen to device" thing in windows has by default. I've tried to install realtek drivers howeve

  • Windows 8 RTM won't boot on W520

    Hi, I have the W520 (configuration bellow). When I install Windows 8 as a dual boot along with Windows 7, the installation process is fine, the system starts and everything seems to work until the first reboot. Then the boot process freezes shortly a

  • Cannot "systemctl enable root-suspend"

    I have recently installed arch and want to run custom scripts on when using systemctl suspend. I have been following the wiki but when i try "systemctl enable root-suspend" for root/system actions or "systemctl enable suspend@marno && systemctl enabl

  • "catch is unreachable" compiler error with java try/catch statement

    I'm receiving a compiler error, "catch is unreachable", with the following code. I'm calling a method, SendMail(), which can throw two possible exceptions. I thought that the catch statements executed in order, and the first one that is caught will e

  • How do I locate my MAC number?

    Got my IMac to run on my Airport wireless and it operates well, however everytime the Imac goes to sleep the Network connection defaults to look for an 'ethernet' connection.  To change that default, the prompt asks me to provide my MAC number.  As I