After reload and "one-step-back-funtion" start from the begining of the site.

Hi guys!
I build a Website in Muse. So i wanna reach that if someone reload the browser or go one step back the page automatically starts from the top.
I tried to insert a HTML-Code like this
$(document).ready(function(){
$(this).scrollTop(0);
but it doesn't work:(
so can someone help me please and give me a code which create this effect?
Thanks guys!

Read this
https://discussions.apple.com/docs/DOC-3251

Similar Messages

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

HT1725 When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.

I recently had to replace my phone. And when I backed it up from the last back up, no all apps or songs that I have purchased on my phone were sinc-d to my computer, how do I get them back

I recently had to get a new phone due to damage. But when I backed it up from the last back up which was a week ago, it didn't put any apps or songs that I purchased on my phone during the last week. How do I get those back?

Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes

I am taking an online course and need to download instructional videos from the site how do i do this

I am taking an online course and need to download the videos to my Imac. How do I do this....new to the mac world

Did you look in your downloads folder? If you are using Safari to download then look at Safari - Preferences - General and look in where it says Save downloaded files to. If you have left it to the defaults download folder you will find that under ~/downloads the ~ means your home folder. You can find that in Finder.
I know you are to OS X so you are probably just unlearning some old bad habits. I'd recommend book marking and using:
Mac 101
Switch 101
Find Out How Video tutorials
List of Useful URLs for switchers

I'm on a Mac and I need to know how to go one step back in Lightroom 5. In other words, what is the Lightroom equivalent of Command Z in Photoshop?

I'm on a Mac and I need to know how to go one step back in Lightroom 5. In other words, what is the Lightroom equivalent of Command Z in Photoshop?

Command Z works for me on Lightroom - always has.
Edit>Undo is the Menu command

Help! After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

After interrupting an installation of a program downloaded from the internet on my mac in a reboot cycle will not start, I've already done the disk check and it's ok and I reinstalled the OS 10.8 Lion

In this case, I think that there's something damaged that can't be fixed just reinstalling OS X.
If you don't want to lose files, you will have to create a second partition in the hard drive and install OS X there, so you will be able to recover everything you need. Then, you will have to erase the first partition and reinstall OS X. Follow these steps:
1. Hold Command and R keys while your Mac is starting to start into OS X Recovery, and open Disk Utility.
2. You can follow the steps of this site to create a second partition > http://pondini.org/OSX/DU3.html
3. After creating the second partition, close Disk Utility and install OS X on the second partition.
4. When the installation finishes, open Finder and, in the sidebar, you will see the other partition. Open it and recover the files you need.
5. After doing that, repeat the step 1.
6. Select “Macintosh HD” in the sidebar, go to Erase tab and erase the disk.
7. Close Disk Utility and install OS X on the first partition.
After doing all of these steps (you will need a lot of time to do this), you can delete the second partition you created and add the size of this partition into the first one > http://pondini.org/OSX/DU4.html

HT204406 my itunes match keeps starting by itself.. gets to the third and final step (artwork) then starts all over again. it does this all by itself. itunes even opens by itself to do this. help!

my itunes match keeps starting by itself.. gets to the third and final step (artwork) then starts all over again. it does this all by itself. itunes even opens by itself to do this. help!

how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...

Scanner moves and then moves back to start and turns my printer off.

When turning on my printer, the scanner moves and then moves back to start and turns my printer off. I can not turn my printer back on unless I unplug it and plug it back in. Then it just does the same thing again and again and again.

Hello @LuvInCayer , and welcome to the HP Forums!
I see you're having power issues. I would like to help!
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend plugging the printer power into a different wall outlet.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

Of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

i use ipad mini with retina display 16gb i love playing clash of clans but due to shortage of space i want to delete it for some days.If i delete the app and then reinstall it after a month should i start from the beginning or cont. from where i left

However, I originally had the kindle app on there and when he is reinstalling it comes up with my kindle account. How do we change this?
OPen teh Kindle app.
Tap the i at bottom right then Settings > Deregister this device.
-> http://www.amazon.com/gp/help/customer/display.html?nodeId=200375710&#managedevi ces
He does not have an actual kindle so I am not sure if he would be able to create one anyways.
The Kindle app is so you do not have to use a Kindle. Yes, he can have a Kindle account and not own an actual Kindle hardware device.

Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up?

When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!

What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start.

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

I listen to a lot of live performances (house sets that are from 1 hour to 3 hours long) when I start to listen to a set and then stop to do something else on the iPhone when I go back to start to listen to the track it has started from the beginning.

It sounds like either your hard drive or the SATA cable that connects it to the motherboard are failing. This could be heat related in your case, which is why you see it after it runs awhile. You can take it to the Genius Bar for a free evaluation. If you decide to test it yourself, I usually suggest moving the hard drive to an external enclosure. If it works there for awhile, the cable is probably the issue.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1397647657&sr=8-3&keywords=2.5+enclosure
http://www.ifixit.com/Device/MacBook_Pro_13%22_Unibody_Mid_2009

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

Just updated my Ipad operating system and one of my apps starts but then the screen turns white, with only the advertisment at the top showing

The normal suggestions.
Close the app,off fully. Double tap the home screen then touch and hold any of the icons on the task bar until they jiggle, then close them all off by touching the - sign.
Then reboot the pad and try the spp again. If same issue, delete the app, then reload it. ( no charge). You may just have a bad copy. If continues, write to the developer, they may need to do an update. I have an older version of the same app and it works fine.
Since yours is the ad supported version, they are maing real sure you see the ad. Is it as simple as you need to click thru the ad to get to the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

After reinstalling game, the achievements from Game Center doesn't uploaded to the game and starts from the beginning . All the achievements are seen in the Game Center . How could I upload the last progress into the game?

Hello there, Elena Lyubina.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an application not functioning as expected:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/ts1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After reload and "one-step-back-funtion" start from the begining of the site.

Similar Messages

Maybe you are looking for